O entre do carvão ao corpo - em - arte de ator-brincante

I propose with this paper a reflection on the experiences contained in the creation of the body- in-art (FERRACINI, 2006a, b) that originated the show Rosmaninhos... This process was developed within the coletivo UZUME teatro from João Pessoa PB, through recreations and resignifications of the corporeity and physicality contained in the steps, loas, aboios, songs and choreography observed in the manners that Mestre Zequinha plays in his group of Cavalo Marinho (Sea Horse), resident in the city of Bayeux - PB, and starting from the appropriation of the text Hamlet of William Shakespeare. The body-in-art is understood in this work as a vectorial body that dilates its daily functionality, recognizing a potential learning area capable to generate creative escape lines that destabilize the "subject centered in an individuality and identity" (FOUCAULT apud FERRACINI, 2006b, p.14), being open to the differentiation of itself, indicating the possible existence of an itself-other and of the exchange-in-art space. This process of construction of the body-in-art based on Master Zequinha s ways of playing the Cavalo Marinho was methodically guided by the appropriation of the coletivo UZUME teatro of the stages of Observation, Codification and Theatricalization contained in the technique of corporal mimeses proposed by the LUME Teatro (Campinas - SP). That use resulted in two phases: Active Observation and Composition of the body-in-art. Through the repetition of these aesthetic matrixes of the Cavalo Marinho, the actors discovered actions that when, codified and organized, can configure their body-in-art, which created a vectorial exchange-in-art space to what was found in the Cavalo Marinho party. This search proposed the means of potentiating the actors' work when it comes to a preparation that allowed to dilate the scenic presence and stimulated the production of actions, which culminated in the mounting of the show Rosmaninhos...

Desenvolvimento de tubulação em compósito polimérico revestida externamente com poliuretano de alta densidade

Pipelines for the transport of crude oil from the production wells to the collecting stations are named production lines . These pipes are subjected to chemical and electrochemical corrosion according to the environment and the type of petroleum transported. Some of these lines, depending upon the composition of the fluid produced, may leak within less than one year of operation due to internal corrosion. This work aims at the development of composite pipes with an external protecting layer of high density polyurethane for use in production lines of onshore oil wells, meeting operational requirements. The pipes were manufactured using glass fibers, epoxy resin, polyester resin, quartz sand and high density polyurethane. The pipes were produced by filament winding with the deposition of high density polyurethane on the external surface and threaded ends (API 15 HR/PM-VII). Three types of pipes were manufactured: glass/epoxy, glass/epoxy with an external polyurethane layer and glass/epoxy with an intermediate layer of glass fiber, polyester, sand and with an external polyurethane layer. The three samples were characterized by Scanning Electronic Microscopy (SEM) and for the determination of constituent content. In addition, the following tests were conducted: hydrostatic test, instant rupture, shorttime failure pressure, Gardner impact, transverse stiffness and axial tension. Field tests were conducted in Mossoró RN (BRAZIL), where 1,677 meters of piping were used. The tests results of the three types of pipes were compared in two events: after two months from manufacturing of the samples and after nine months of field application. The results indicate that the glass/epoxy pipes with an intermediate layer of fiber glass composite, polyester e sand and with an external layer of high density polyurethane showed superior properties as compared to the other two and met the requirements of pressure class, axial tensile strength, transverse stiffness, impact and environmental conditions, for onshore applications as production lines

Obtenção de uma porcelana dielétrica a partir de matérias-primas do Rio Grande do Norte

The dielectric porcelain is usually obtained by mixing various raw materials proportions and is used in the production of electronic equipment for various applications, from capacitors of high and low Power to insulators for low, medium, high and extra high voltage, which are used in distribution lines and transmission of electricity.This work was directed to the s tudy of technological properties of technic porcelain, made from raw materials extracted from pegmatites found in the regions of Seridó and the Alto Oeste of Rio Grande do Norte, which are made of kaolin, quartz and feldspar, abundant and high quality in these regions. The technic ceramics were obtained by mixing in appropriate levels, kaolin, feldspar, quartz and clay, the last item from a pottery in the city of Sao Gonçalo do Amarante, Rio Grande do Norte. During the development the following characterizations correlated to raw materials were made: laser particle sizing, x-ray diffraction, DTA and TG. The compositions studied were formed by uniaxial pressing at a pressure of 50 MPa and sintered at temperatures ranging from 1150 to 1350ºC and levels (times) of sintering between 30, 60, 90 and 120 minutes. The characterization of the samples were taken from the analysis of weight loss, linear shrinkage, porosity, stoneware curve, bulk density, flexural strength of three points, SEM and X-ray diffraction, TMA, Dielectric and cross Resistivity. The studied materials can be employed in producing the objects used in electrical engineering such as: insulators for low, medium and high-voltage electrical systems, command devices, bushing insulation for transformers, power capacitors, spark plugs, receptacles for fluorescent and incandescent light bulbs and others

Avaliação de inibidores verdes microemulsionados na inibição à corrosão do aço carbono AISI 1020

In general, among the corrosion inhibitors surfactants are the most commonly used compounds, because they are significantly effective by forming protective films on anodic and cathodic areas. In this study, microemulsions containing he biodegradable saponified coconut oil as surfactant (SME-OCS) was used as green corrosion inhibitors. With this purpose, methanolic extracts of Ixora coccinea Linn (IC) and a polar fraction rich in alkaloids (FA) obtained from Croton cajucara Benth solubilized in the SME-OCS system were examined in the presence of AISI 1020 carbon steel, in saline solution (NaCl 3,5 %). The efficiency of corrosion inhibition of IC and FA were evaluated in the following microemulsions: SME-OCS-IC and SME-OCS-FA. The microemulsion system SME-OCS in the presence and absence of IC and FA was assessed by measurements of weight loss and the electrochemical method of polarization resistance, with variation in the concentration of IC and FA (50 - 400 ppm), showing significant results of corrosion inhibition (83,6 % SME-OCS; 92,2 % SME-OCS-FA; and 95,3 % SME-OCS-IC)

Construção de um aparato experimental para monitoramento in situ da deposição de filmes finos de titânio por magnetron sputtering

The technique of surface coating using magnetron sputtering is one of the most widely used in the surface engineering, for its versatility in obtaining different films as well as in the micro / nanometric thickness control. Among the various process parameters, those related to the active species of the plasma are of the most fundamental importance in the mechanism and kinetics of deposition. In order to identify the active species of the plasma, parameters such as gas flow, pressure and density of electric power were varied during titanium coating on glass substrate. By flowing argon gas of 10, 20, 30, 40 and 50 sccm (cubic centimeters per minute) for each gas flow a sequential scan of the electric current of 0.10, 0.20, 0.30, 0.40 , 0.50 A. The maximum value of 0.50 A was chosen based both on literature data and on limitations of the equipment. The monitoring of plasma species present during the deposition was carried out in situ by the technique of optical emission spectroscopy (OES) through the spectrometer Ocean Optics USB2000 Series. For this purpose, an apparatus was developed to adapt the OES inside the plasma reactor to stay positioned closest to the target. The radiations emitted by the species were detected by an optical fiber placed behind the glass substrate and their intensities as a function of wavelength were, displayed on a monitor screen. The acquisition time for each condition of the plain parameters was related to the minima of spectral lines intensities due to the film formed on the substrate. The intensities of different emission lines of argon and titanium were then analyzed as a function of time, to determine the active species and estimate the thickness of the deposited films. After the deposition, the coated glasses thin films were characterized by optical transmittance through an infrared laser. It was found that the thickness and deposition rate determined by in situ analysis were consistent with the results obtained by laser transmittance

Análise comparativa entre simuladores de linha de fluxo e diferenças finitas para um reservatório de petróleo submetido a injeção de água

Water injection is the most widely used method for supplementary recovery in many oil fields due to various reasons, like the fact that water is an effective displacing agent of low viscosity oils, the water injection projects are relatively simple to establish and the water availability at a relatively low cost. For design of water injection projects is necessary to do reservoir studies in order to define the various parameters needed to increase the effectiveness of the method. For this kind of study can be used several mathematical models classified into two general categories: analytical or numerical. The present work aims to do a comparative analysis between the results presented by flow lines simulator and conventional finite differences simulator; both types of simulators are based on numerical methods designed to model light oil reservoirs subjected to water injection. Therefore, it was defined two reservoir models: the first one was a heterogeneous model whose petrophysical properties vary along the reservoir and the other one was created using average petrophysical properties obtained from the first model. Comparisons were done considering that the results of these two models were always in the same operational conditions. Then some rock and fluid parameters have been changed in both models and again the results were compared. From the factorial design, that was done to study the sensitivity analysis of reservoir parameters, a few cases were chosen to study the role of water injection rate and the vertical position of wells perforations in production forecast. It was observed that the results from the two simulators are quite similar in most of the cases; differences were found only in those cases where there was an increase in gas solubility ratio of the model. Thus, it was concluded that in flow simulation of reservoirs analogous of those now studied, mainly when the gas solubility ratio is low, the conventional finite differences simulator may be replaced by flow lines simulator the production forecast is compatible but the computational processing time is lower.

Contribuição da Geodésia ao monitoramento costeiro do Litoral Setentrional do Rio Grande do Norte, área de influência da indústria petrolífera

The general objective of this thesis has been seasonal monitoring (quarterly time scale) of coastal and estuarine areas of a section of the Northern Coast of Rio Grande do Norte, Brazil, environmentally sensitive and with intense sediment erosion in the oil activities to underpin the implementation of projects for containment of erosion and mitigate the impacts of coastal dynamics. In order to achieve the general objective, the work was done systematically in three stages which consisted the specific objectives. The first stage was the implementation of geodetic reference infrastructure for carrying out the geodetic survey of the study area. This process included the implementation of RGLS (Northern Coast of the RN GPS Network), consisting of stations with geodetic coordinates and orthometric heights of precision; positioning of Benchmarks and evaluation of the gravimetric geoid available, for use in GPS altimetry of precision; and development of software for GPS altimetry of precision. The second stage was the development and improvement of methodologies for collection, processing, representation, integration and analysis of CoastLine (CL) and Digital Elevation Models (DEM) obtained by geodetic positioning techniques. As part of this stage have been made since, the choice of equipment and positioning methods to be used, depending on the required precision and structure implanted, and the definition of the LC indicator and of the geodesic references best suited, to coastal monitoring of precision. The third step was the seasonal geodesic monitoring of the study area. It was defined the execution times of the geodetic surveys by analyzing the pattern of sediment dynamics of the study area; the performing of surveys in order to calculate and locate areas and volumes of erosion and accretion (sandy and volumetric sedimentary balance) occurred on CL and on the beaches and islands surfaces throughout the year, and study of correlations between the measured variations (in area and volume) between each survey and the action of the coastal dynamic agents. The results allowed an integrated study of spatial and temporal interrelationships of the causes and consequences of intensive coastal processes operating in the area, especially to the measurement of variability of erosion, transport, balance and supply sedimentary over the annual cycle of construction and destruction of beaches. In the analysis of the results, it was possible to identify the causes and consequences of severe coastal erosion occurred on beaches exposed, to analyze the recovery of beaches and the accretion occurring in tidal inlets and estuaries. From the optics of seasonal variations in the CL, human interventions to erosion contention have been proposed with the aim of restoring the previous situation of the beaches in the process of erosion.

Monitoramento da morfologia costeira em setores da bacia potiguar sob influência da indústria petrolífera utilizando geodésia de alta precisão e laser escâner terrestre

The objective of this Doctoral Thesis was monitoring, in trimestral scale, the coastal morphology of the Northeastern coast sections of Rio Grande do Norte State, in Brazil, which is an area of Potiguar Basin influenced by the oil industry activities. The studied sections compose coastal areas with intense sedimentary erosion and high environmental sensitivity to the oil spill. In order to achieve the general objective of this study, the work has been systematized in four steps. The first one refers to the evaluation of the geomorphological data acquisition methodologies used on Digital Elevation Model (DEM) of sandy beaches. The data has been obtained from Soledade beach, located on the Northeastern coast of Rio Grande Norte. The second step has been centered on the increasing of the reference geodetic infrastructure to accomplish the geodetic survey of the studied area by implanting a station in Corta Cachorro Barrier Island and by conducting monitoring geodetic surveys to understand the beach system based on the Coastline (CL) and on DEM multitemporal analysis. The third phase has been related to the usage of the methodology developed by Santos; Amaro (2011) and Santos et al. (2012) for the surveying, processing, representation, integration and analysis of Coastlines from sandy coast, which have been obtained through geodetic techniques of positioning, morphological change analysis and sediment transport. The fourth stage represents the innovation of surveys in coastal environment by using the Terrestrial Laser Scanning (TLS), based on Light Detection and Ranging (LiDAR), to evaluate a highly eroded section on Soledade beach where the oil industry structures are located. The evaluation has been achieved through high-precision DEM and accuracy during the modeling of the coast morphology changes. The result analysis of the integrated study about the spatial and temporal interrelations of the intense coastal processes in areas of building cycles and destruction of beaches has allowed identifying the causes and consequences of the intense coastal erosion in exposed beach sections and in barrier islands

Desenvolvimento e caracterização de um sistema microemulsionado contendo anfotericina b para uso oftalmológico

Universidade Federal do Rio Grande do Norte

Avaliação do cuidado na estratégia saúde da família em metrópoles do nordeste brasileiro

Objective: To evaluate the implementation of the Family Health Strategy (FHS) in Brazilian cities of the Northeast, expanding coverage, analyzing the progress, challenges and innovations. Methods: Multicentric Evaluation Research, Studies Baselines in urban centers, using as a case study method. Selected cases of Aracaju, being capital, advanced coverage with extended team, and Fortaleza, capital coverage incipient and minimal staff. In Fortaleza, purposive sample of 11 Units Primary (APS), 03 managers, 53 professionals and 109 users. In Aracaju, 09 units of APS, 02 managers, 36 professionals, and 90 users. Structured interviews for managers, and structured to professionals and users. Descriptive analysis focusing on the political and institutional dimensions, organization and comprehensive care. Results: There was consensus that the ESF is the preferred port users and acts as inducing changes in care. In the case of Fortaleza, the specificities were: care protocols and community activities aimed at chronic conditions (100%) , with greater participation of doctors and nurses (93%) ; conjunction with more complex services, but the teams reported difficulties with the examination center and experts, the long waits and poor access to local services were the main difficulties reported by users., As innovative practice, the therapeutic group of elderly caregivers mentioned by respondents; There was intersectoral initiatives and teams 87 % of users have participated in meetings about health problems. In the case of Aracaju, care protocols were directed to the lines of care and formulated locally, 85 % coverage of the population with FHS counterpart local financing; employees hired by public tender; 70 % of teams with expertise in public health center for continuing education acting; democratization in management; access technologies, welcoming and computerization in different integrated networks, and evaluation matrix. Conclusions: The ESF has promoted access to health care and inclusion of disadvantaged populations. Different perceptions and practices in the organization of care, with distinct trajectories of reorganization. In the case of Fortaleza, predominance of model programs valuing older, with evidence of advances in care practices and teamwork, but restricted to primary care practices and incipient in public policy perspective. In Aracaju, had network integration with technologies related to the family, in which the ESF is consolidated as public policy. It can be argued that the XII APS expanding coverage, exhibited efficacy, despite the challenges inherent to the different degrees of implementation

Padrões de infestação de comunidades de plantas daninhas no agroecossistema de cana-crua

Objetivou-se neste trabalho a obtenção de padrões de infestação de plantas daninhas na cultura de cana-de-açúcar com histórico de colheita mecanizada sem queima prévia da palha. Foram realizadas amostragens em 28 talhões na região de Ribeirão Preto, SP; em cada talhão foram demarcadas unidades de avaliação e coleta, na proporção de duas por hectare, que consistiram de áreas (quatro linhas de 4 metros de comprimento) mantidas sem controle de plantas daninhas e onde foram realizadas as amostragens de plantas emergidas. As amostragens foram realizadas aos 120 dias após o corte, com quadrados vazados (0,5 x 0,5 m) lançados aleatoriamente duas vezes em cada uma das unidades de avaliação e coleta. Com os dados obtidos, calculou-se a importância relativa e o índice de agregação das espécies ou grupo de espécies. Esses índices foram usados no processamento da análise de agrupamento hierárquica, utilizando como medida de semelhança a distância euclidiana e como estratégia de agrupamento o método UPGMA (Unweighted Pair-Group Method using arithmetic Averages). Foi possível distinguir quatro grupos em função da importância relativa e cinco grupos de talhões em função do índice de agregação; dentro de alguns grupos houve formação de subgrupos.

Período anterior à interferência das plantas daninhas para a cultivar de feijoeiro 'Rubi' em função do espaçamento e da densidade de semeadura

Os feijões estão entre os alimentos mais antigos, fazendo parte da alimentação diária da população brasileira. Objetivou-se com este trabalho determinar o período de convivência anterior à interferência das plantas daninhas (PAI) na cultura do feijoeiro em diferentes espaçamentos e densidades de plantas. Os tratamentos foram constituídos de períodos de convivência entre a cultura e as plantas daninhas, sendo zero a dez, zero a 20, zero a 30, zero a 40, zero a 50, zero a 60, zero a 70 e zero a 80 dias e mais uma testemunha sem convívio com as plantas daninhas. Além dos períodos de convivência, realizaram-se ainda estudos com espaçamentos entre linhas de 0,45 e 0,60 m e mais duas densidades de semeadura: dez e 15 plantas m-1. Adotou-se delineamento experimental de blocos casualizados, com quatro repetições. Quando o feijoeiro esteve presente com as plantas daninhas durante o ciclo, a produtividade dos grãos foi reduzida a 63, 50, 42 e 57% para os tratamentos com espaçamento de 0,45 m, densidades de semeadura de dez e 15 plantas m-1, espaçamento de 0,60 m e densidades de semeadura de dez e 15 plantas m-1, respectivamente. Os períodos anteriores à interferência (PAIs) da cultura foram de 23, 27, 13 e 19 dias após emergência, respectivamente.

Períodos de interferência de maria-pretinha sobre tomateiro industrial

Determinou-se os efeitos da convivência com plantas de maria-pretinha sobre a produtividade do tomateiro industrial, híbrido Heinz 9992, em um experimento com dois grupos de tratamentos: no primeiro, o tomate permaneceu livre da competição (60 mil plantas ha-1 de maria-pretinha) do transplantio até 15; 30; 45; 60; 75; 90; 105 e 120 dias (colheita); no segundo, a cultura permaneceu em competição com a maria-pretinha do transplantio até os mesmos períodos citados. Utilizaram-se blocos casualizados, três repetições e parcelas de quatro linhas. Altura, área foliar e massa seca da parte aérea da maria-pretinha foram obtidas a partir de amostras de dez plantas. A área foliar das plantas de maria-pretinha cresceu até 75 dias de convivência com as plantas de tomate (1.588 dm² planta-1), a altura até 60 dias de convivência (85 cm) e a massa seca da parte aérea até 120 dias de convivência (31,7 g planta-1). As produtividades mais alta (108,6 t ha-1 ou 87,6% da produção total de frutos) e mais baixa (14,2 t ha-1; 59,0%) de frutos maduros de tomate foram observadas quando a convivência entre tomate e maria-pretinha ocorreu respectivamente apenas nos 15 primeiros dias e ao longo de todo o ciclo do tomate. Nestes tratamentos, o peso médio de frutos maduros foi de respectivamente 58,7 e 38,0 g. Verificou-se que cada cm² de acréscimo em área foliar das plantas de maria-pretinha causou uma redução de 0,04 t ha-1 na produção de frutos maduros (PFM) (R² = 0,90), cada centímetro em altura da planta daninha reduziu 0,82 t ha-1 na PFM (R² = 0,78) e cada grama de acréscimo em massa seca de caules e folhas da planta daninha causou uma redução de 2,84 t ha-1 PFM (R² = 0,97). O período anterior à interferência, considerando-se a redução na produtividade do tomate em 5%, foi de 27 dias após o transplantio (DAT) da cultura; o período total de prevenção à interferência foi de 46 DAT e, o período crítico de prevenção à interferência, de 27 a 46 DAT.

The Beatles: ensaio sobre a ética do amor

The thesis intends to discuss the ethics by the way of love. So, it uses as a mention the musical work and the set of attitudes of the group that changed the way of thinking across the 20th Century mass-comm, entering a new way of thinking about the World: The Beatles. Analyzing the lyrics and the writing of the songs was searched the comprehension of he intrinsic love message at the Ethics it expresses. At the musical art of The Beatles political messages had been announced in a time that the World sought a Ethic way beyond the several declared war and the Cold War. Taking the Edgar Morin works as a base, O método 6, Ética (2005), it sought to understand the idea who permeates the human relations: the good, the possible, the necessary. Another works used as a cognitive base were Meus demônios (2003), Cultura de massas no Século XX: neurose (2005), Cultura de massas no Século XX (2006), The Beatles Anthology (2000) and Many years from now (2000). Holding the Ethics idea showed by Morin were established imaginary lines that perpass the behavior of the group known in the entire World understood till nowadays as tolerance, comprehension, peace, love and endurance messengers. The Beatles operate during the sixties a musical reborn, which allowed to the people the discussion and the reflexion about the World and the human being new behavior,endurance but acting with tolerance. Permeating the basic study, we find the Beatles way, the group origin, the fast walk till success, the spiritual choice, who guide their behavior and the end of the band. The music used as a masscomp instrument passes by the condition of a simple way of communicating. It deeply action feeds feelings, allows transcendence and is showed as target of human being transformation. The Ethics in music passes by the ideological barriers and becomes to comprehension with a clear synthony for the man, cause the polyphony and the new musical order establish the messages worldwide

Tolerância de cana-de-açúcar a herbicidas avaliada pela diferença dos tratamentos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)