987 resultados para Left-handed material
Resumo:
Adiabatic shear localization is a mode of failure that occurs in dynamic loading. It is characterized by thermal softening occurring over a very narrow region of a material and is usually a precursor to ductile fracture and catastrophic failure. This reference source is the first detailed study of the mechanics and modes of adiabatic shear localization in solids, and provides a systematic description of a number of aspects of adiabatic shear banding. The inclusion of the appendices which provide a quick reference section and a comprehensive collection of thermomechanical data allows rapid access and understanding of the subject and its phenomena. The concepts and techniques described in this work can usefully be applied to solve a multitude of problems encountered by those investigating fracture and damage in materials, impact dynamics, metal working and other areas. This reference book has come about in response to the pressing demand of mechanical and metallurgical engineers for a high quality summary of the knowledge gained over the last twenty years. While fulfilling this requirement, the book is also of great interest to academics and researchers into materials performance.Table of Contents
| 1 | Introduction | 1 |
| 1.1 | What is an Adiabatic Shear Band? | 1 |
| 1.2 | The Importance of Adiabatic Shear Bands | 6 |
| 1.3 | Where Adiabatic Shear Bands Occur | 10 |
| 1.4 | Historical Aspects of Shear Bands | 11 |
| 1.5 | Adiabatic Shear Bands and Fracture Maps | 14 |
| 1.6 | Scope of the Book | 20 |
| 2 | Characteristic Aspects of Adiabatic Shear Bands | 24 |
| 2.1 | General Features | 24 |
| 2.2 | Deformed Bands | 27 |
| 2.3 | Transformed Bands | 28 |
| 2.4 | Variables Relevant to Adiabatic Shear Banding | 35 |
| 2.5 | Adiabatic Shear Bands in Non-Metals | 44 |
| 3 | Fracture and Damage Related to Adiabatic Shear Bands | 54 |
| 3.1 | Adiabatic Shear Band Induced Fracture | 54 |
| 3.2 | Microscopic Damage in Adiabatic Shear Bands | 57 |
| 3.3 | Metallurgical Implications | 69 |
| 3.4 | Effects of Stress State | 73 |
| 4 | Testing Methods | 76 |
| 4.1 | General Requirements and Remarks | 76 |
| 4.2 | Dynamic Torsion Tests | 80 |
| 4.3 | Dynamic Compression Tests | 91 |
| 4.4 | Contained Cylinder Tests | 95 |
| 4.5 | Transient Measurements | 98 |
| 5 | Constitutive Equations | 104 |
| 5.1 | Effect of Strain Rate on Stress-Strain Behaviour | 104 |
| 5.2 | Strain-Rate History Effects | 110 |
| 5.3 | Effect of Temperature on Stress-Strain Behaviour | 114 |
| 5.4 | Constitutive Equations for Non-Metals | 124 |
| 6 | Occurrence of Adiabatic Shear Bands | 125 |
| 6.1 | Empirical Criteria | 125 |
| 6.2 | One-Dimensional Equations and Linear Instability Analysis | 134 |
| 6.3 | Localization Analysis | 140 |
| 6.4 | Experimental Verification | 146 |
| 7 | Formation and Evolution of Shear Bands | 155 |
| 7.1 | Post-Instability Phenomena | 156 |
| 7.2 | Scaling and Approximations | 162 |
| 7.3 | Wave Trapping and Viscous Dissipation | 167 |
| 7.4 | The Intermediate Stage and the Formation of Adiabatic Shear Bands | 171 |
| 7.5 | Late Stage Behaviour and Post-Mortem Morphology | 179 |
| 7.6 | Adiabatic Shear Bands in Multi-Dimensional Stress States | 187 |
| 8 | Numerical Studies of Adiabatic Shear Bands | 194 |
| 8.1 | Objects, Problems and Techniques Involved in Numerical Simulations | 194 |
| 8.2 | One-Dimensional Simulation of Adiabatic Shear Banding | 199 |
| 8.3 | Simulation with Adaptive Finite Element Methods | 213 |
| 8.4 | Adiabatic Shear Bands in the Plane Strain Stress State | 218 |
| 9 | Selected Topics in Impact Dynamics | 229 |
| 9.1 | Planar Impact | 230 |
| 9.2 | Fragmentation | 237 |
| 9.3 | Penetration | 244 |
| 9.4 | Erosion | 255 |
| 9.5 | Ignition of Explosives | 261 |
| 9.6 | Explosive Welding | 268 |
| 10 | Selected Topics in Metalworking | 273 |
| 10.1 | Classification of Processes | 273 |
| 10.2 | Upsetting | 276 |
| 10.3 | Metalcutting | 286 |
| 10.4 | Blanking | 293 |
| Appendices | 297 | |
| A | Quick Reference | 298 |
| B | Specific Heat and Thermal Conductivity | 301 |
| C | Thermal Softening and Related Temperature Dependence | 312 |
| D | Materials Showing Adiabatic Shear Bands | 335 |
| E | Specification of Selected Materials Showing Adiabatic Shear Bands | 341 |
| F | Conversion Factors | 357 |
| References | 358 | |
| Author Index | 369 | |
| Subject Index | 375 |
Resumo:
This report is the final product of a two-year study conducted for the Office, Chief of Engineers, by the Moss Landing Marine Laboratories, Moss Landing, California, under Contract No. DACW39-74-C-OI51 with the Environmental Effects Laboratory (EEL), U. S. Army Engineer Waterways Experiment Station (WES), Yicksburg, Mississippi. (PDF contains 192 pages)
Resumo:
目前国际上占主导地位的纳米压痕技术是由Oliver与Pharr提出并发展,目前的纳米压痕可以给出整个加、卸载过程的载荷—位移曲线以及硬度与弹性模量随压痕深度变化的曲线,从而提供了丰富的、比较精确的信息,为利用它探索材料比较完整的力学特性提供了可能.为达到该目的,就必须对压痕实验的加、卸过程进行较为深入的研究.作为主要的研究工具,有限元方法模拟微压痕过程在探讨通过实验数据得到更多、更准确的材料表层力学性能参数以及解释实验现象等方面发挥着重要作用.基于计算机速度与容量的原因,较早进行微压痕过程有限元模拟的BhattacharyaandNix、LaursenandSino都使用圆锥压头模拟维氏显微硬度标准正四棱锥Vicker压头与纳米压痕仪标准正三棱锥Berkovich压头,因为圆锥压头具有旋转对称性,可用二维旋转对称单元(二维实体单元)进行计算从而降低计算规模.即便如此,以当时大型计算机的水平,对规模为400~2000个四节点矩形单元的有限元模型进行一次完整的加、卸载过程也需要1~2天.到目前为止,微尺度压痕实验的数值模拟沿用二维模型.事实上,由于加工工艺的限制,微尺度压痕仪的压头如Berkovich与Vicker压头均不个旋转对称性;就微观尺度而言,实际的表层材料都是非均匀的.这些特征均不能由二维模拟体现,所以该文首先建立三维有限元模型,模拟带滑动接触的微尺度压痕加、卸载过程.在此基础上重点讨论了压头几何效应的问题,如二维模拟与三维模拟的关系、显微硬度与纳米的压痕硬度的关系、不同压头下材料的应力应变场、压痕间距与压痕边界的效应等,最后针对微尺度压痕实验中出现的压痕硬度随压痕深度减小而升高的现象,讨论了影响不同压痕深度硬度值的因素.
Resumo:
Este trabajo se basa en los muestreos sobre las percas (Percichthys sp) realizado entre los años 1955 a 1957 por María Luisa Fuster de Plaza y Enrique E. Boschi, ambos investigadores se desempañaban en el Departamento de Investigaciones Pesqueras de la Dirección Nacional de Pesca, dependiente del Ministerio de Agricultura y Ganadería de la Nación de entonces. Las tareas se llevaron a cabo principalmente en varios cuerpos de agua léntica y lóticas de la región de la Patagonia Norte (Provincias de Río Negro, Neuquen y Chubut), y en la provincia de Mendoza. Consisten en datos morfométricos, desarrollo gonadal, fecundidad, contenidos alimenticios, planillas, dibujos, etc. de 80 ejemplares de percas. La autora tuvo a su cargo el análisis de los datos de esos muestreos y las comparaciones con estudios de material más reciente, correspondiente al lago Pellegrini, a partir de 1981.
Resumo:
286 p. : il. col.
Resumo:
In this paper, a new definition of SE and CE, which is based on the hexahedron mesh and simpler than Chang's original CE/SE method (the space-time Conservation Element and Solution Element method), is proposed and an improved CE/SE scheme is constructed. Furthermore, the improved CE/SE scheme is extended in order to solve the elastic-plastic flow problems. The hybrid particle level set method is used for tracing the interfaces of materials. Proper boundary conditions are presented in interface tracking. Two high-velocity impact problems are simulated numerically and the computational results are carefully compared with the experimental data, as well as the results from other literature and LS-DYNA software. The comparisons show that the computational scheme developed currently is clear in physical concept, easy to be implemented and high accurate and efficient for the problems considered. (C) 2008 Elsevier Ltd. All rights reserved.
Resumo:
Distribution of the genus Anodontites (Mollusca: Bivalvia: Mycetopodidae) in Uruguay. Seven species of the freshwater mussel genus Anodontites were recorded from Uruguay. The populations of these bivalves suffer the negative effects of invasive bivalves, damming, industrial and urban discharges, and agrotoxic runoff. The distribution of these species is generally characterized at the level of basin or politic divisions, and precise geographic records are scarce. In order to detail the distribution of those species, the most representative collections of Uruguay were examined, the material of Anodontites was identified (612 records) and geographic coordenates were assigned at each locality (213 localities), using Geographic Information System (GIS) to obtain a distribution map for each species. Most of the localities with Anodontites were located in the left margin of Uruguay River and southwest of Uruguay, mainly in Soriano, Artigas, Salto and Colonia departments. The Salto Grande basin presented the highest species richness. The species with a highest number of records was A. patagonicus, which was also recorded in all basins. A. trapesialis and A. tenebricosus had a wide distribution and a high number of records. A. lucidus and A. ferrarisii, had a wide distribution (more than 6 basins) but comparatively lower number of records. Finally A. trapezeus and A. trigonus showed a limited distribution. There is a critical lack of samples in Merín Lagoon, Atlantic and Upper Negro River basins. It is necessary to carry out new sampling considering many variables in order to evaluate the current distribution and the ecologic preferences for each species.
Resumo:
To meet the demand of modern acoustic absorbing material for which acoustic absorbing frequency region can be readily tailored, we introduced woodpile structure into locally resonant phononic crystal (LRPC) and fabricated an underwater acoustic absorbing material, which is called locally resonant phononic woodpile (LRPW). Experimental results show that LRPW has a strong capability of absorbing sound in a wide frequency range. Further theoretical research revealed that LRPC units and woodpile structure in LRPW play an important role in realization of wide band underwater strong acoustic absorption.
Resumo:
105 p. : il. - Ilustraciones de Oscar Mardones Ruiz
