The effect of the group delay ripple of chirped fiber grating on composite second-order in optical fiber CATV system

The effect of group delay ripple of chirped fiber gratings on composite second-order (CSO) performance in optical fiber CATV system is investigated. We analyze the system CSO performances for different ripple amplitudes, periods and residual dispersion amounts in detail. It is found that the large ripple amplitude and small ripple period will deteriorate the system CSO performance seriously. Additionally, the residual dispersion amount has considerable effect on CSO performance in the case of small ripple amplitude and large ripple period. (c) 2004 Elsevier B.V. All rights reserved.

Composite second-order performance improvement in optical fibre CATV transmission system using chirped fibre grating

Theoretically, we analyse the dispersion compensation characteristics of the chirped fibre grating (CFG) in an optical fibre cable television (CATV) system and obtain the analytic expression of the composite second-order (CSO) distortion using the time-domain form of the field envelope wave equation. The obtained result is in good agreement with the numerical simulation result. Experimentally, we verify the result by making use of the tunable characteristics of CFG to change the dispersion compensation amount and obtain an optimal CSO performance in a 125km fibre transmission link. Both the theoretical and experimental results show that the CSO performance can be improved by properly choosing the dispersion compensation amount for a certain fibre transmission link.

An investigation of the stresses and deflections of swept plates

The problem in this investigation was to determine the stress and deflection patterns of a thick cantilever plate at various angles of sweepback.

The plate was tested at angles of sweepback of zero, twenty, forty, and sixty degrees under uniform shear load at the tip, uniformly distributed load and torsional loading.

For all angles of sweep and for all types of loading the area of critical stress is near the intersection of the root and trailing edge. Stresses near the leading edge at the root decreased rapidly with increase in angle of sweep for all types of loading. In the outer portion of the plate near the trailing edge the stresses due to the uniform shear and the uniformly distributed load did not vary for angles of sweep up to forty degrees. For the uniform shear and the uniformly distributed loads for all angles of sweep the area in which end effect is pronounced extends from the root to approximately three quarters of a chord length outboard of a line perpendicular to the axis of the plate through the trailing edge root. In case of uniform shear and uniformly distributed loads the deflections near the edge at seventy-five per cent semi-span decreased with increase in angle of sweep. Deflections near the trailing edge under the same loading conditions increased with increase in angle of sweep for small angles and then decreased at the higher angles of sweep. The maximum deflection due to torsional loading increased with increase in angle of sweep.

Pure-phase plates for super-Gaussian focal-plane irradiance profile generations of extremely high order

A set of recursive formulas for diffractive optical plates design is described. The pure-phase plates simulated by this method homogeneously concentrate more than 96% of the incident laser energy in the desired focal-plane region. The intensity focal-plane profile fits a lath-order super-Gaussian function and has a nearly perfect flat top. Its fit to the required profile measured in the mean square error is 3.576 x 10(-3). (C) 1996 Optical Society of America

Biogeografia e sistemática dos peixes aulopiformes

Os Aulopiformes são peixes marinhos com amplitude temporal do Eocretáceo ao Recente. Os táxons fósseis são encontrados em depósitos sedimentares das Américas do Sul e do Norte, Europa, Ásia e África. Os representantes viventes podem ser encontrados desde águas rasas costeiras, estuários, até profundidades abissais, excedendo 3.000 m. Os limites do grupo, suas intra e inter-relações são objeto de muitos estudos. O objetivo central desta tese é aplicar métodos de Biogeografia Histórica como Panbiogeografia e a Análise de Parcimônia de Endemismos aos peixes Aulopiformes. Adicionalmente, foi realizada a análise filogenética dos Aulopiformes. Como resultado foram obtidos: 21 traços generalizados de Synodontoidei, 28 de Chlorophthalmoidei, 3 de Giganturoidei e 7 de Enchodontoidei. O clado Synodontoidei apresenta um padrão de distribuição primordialmente em águas tropicais e subtropicais, associado à borda de placas tectônicas e ao tipo de substrato. O clado Chlorophthalmoidei apresenta padrões de distribuição associados a cadeias de montanhas submarinas e corais de profundidade. O clado Giganturoidei possui uma distribuição vicariante com a família Giganturidae ocupando águas mais quentes e Bathysauridae as regiões mais frias. O clado Enchodontoidei foi associado a recifes de coral e zonas de ressurgência pretéritos. Adicionalmente, foi analisada uma matriz de dados com 84 táxons e 105 caracteres morfológicos não ordenados e sem pesagem a priori. Como resultado foram obtidas sete árvores igualmente parcimoniosas com 1214 passos, índice de consistência de 0,1129 e índice de retenção de 0,4970. A ordem Aulopiformes não constituiu um grupo monofilético, com as famílias Chlorophthalmidae, Notosudidae, Synodontidae, Paraulopidae, Pseudotrichonotidae e Ipnopidae mais proximamente relacionados ao Myctophidea que aos Alepisauroidei. Assim a partir da combinação dos resultados alcançados conclui-se que a Biogeografia Histórica funcionou como uma ferramenta na identificação dos problemas taxonômicos dos Aulopiformes e a sua análise filogenética permitiu identificar controvérsias sistemáticas, indicando que são necessários maiores estudos sobre a anatomia dos aulopiformes, a fim de esclarecer suas inter-relações.

The tunable negative refractive index in granular composite

The effective refractive index of a kind of granular composite, which consists of granular metallic and magnetic inclusions with different radius embedded in a host medium, is theoretically investigated. Results show that for certain volume fractions of these two inclusions, the negative permittivity peak shifts to low frequency and the peak value increases with increasing radius ratio of the radius of magnetic granulae to that of metallic granulae. Simultaneously, peak value of permeability decreases with the radius ratio, and value peak shifts to high frequency with increasing volume fraction of magnetic inclusion. Therefore, the radius ratio can affect the effective refractive index considerably, and it is found that by adjusting the radius ratio, the refractive index may change between negative and positive values for certain volume fractions of the two inclusions. (c) 2005 Elsevier B.V. All rights reserved.