The effect of water quality on coarse fish productivity and movement in the Lower River Irwell and Upper Manchester Ship Canal a watercourse recovering from historical pollution

This is the Effect of water quality on coarse fish productivity and movement in the Lower River Irwell and Upper Manchester Ship Canal: a watercourse recovering from historical pollution report produced by the Environment Agency in 2003. The aim of this study was to investigate the impact of water quality upon coarse fish population dynamics in a lowland, urban watercourse. All of the research carried was undertaken in the lower River Irwell and upper Manchester Ship Canal, between February 1998 and December 2001. Of particular interest was the natural sustainability of the urban fishery given recent concern raised in the angling community over an apparent decline in coarse fish populations in lowland rivers. The research described in this report has concentrated upon the role of water quality in determining coarse fish population dynamics, and in particular: The impact of water quality upon fish growth and productivity; The impact of poor water quality and low dissolved oxygen concentrations upon fish distribution and movement; The impact of water quality upon the sexual development of fish.

River habitat survey and geomorphological evaluation of the Glaze Brook Catchment

This is the River habitat survey and geomorphological evaluation of the Glaze Brook Catchment report produced by the Environmental Research and Consultancy of the University of Liverpool in 2002. The major aims of the project were to provide baseline information on river habitats in the Glaze catchment using standard River Habitat Survey (RHS) methods (sampling 25% of the catchment length) and, through the geomorphological audit, to assess the distribution and intensity of geomorphological processes, notably sediment transfer, sources and sinks. This information was then used to develop informed management recommendations. The Glaze catchment is a heavily modified watercourse of generally poor habitat quality. The most important factors contributing to the low quality of the sites are poor bank and channel features; low diversity/absence of channel vegetation; paucity of bankside trees and, to a lesser extent, a lack of channel substrate diversity. The high degree of modification relates principally to extensively resectioned banks and channels plus extensive culverting in the urban parts of the catchment.

Benthic habitats of Fish Bay, Coral Bay and the St. Thomas East End Reserve

NOAA’s National Centers for Coastal Ocean Science Biogeography Branch has mapped and characterized large portions of the coral reef ecosystems inside the U.S. coastal and territorial waters, including the U.S. Caribbean. The complementary protocols used in these efforts have enabled scientists and managers to quantitatively and qualitatively compare marine ecosystems in tropical U.S. waters. The Biogeography Branch used similar protocols to generate new benthic habitat maps for Fish Bay, Coral Bay and the St. Thomas East End Reserve (STEER). While this mapping effort marks the third time that some of these shallow-water habitats (≤40 m) have been mapped, it is the first time that nearly 100% of the seafloor has been characterized in each of these areas. It is also the first time that high resolution imagery describing seafloor depth has been collected in each of these areas. Consequently, these datasets provide new information describing the distribution of coral reef ecosystems and serve as a spatial baseline for monitoring change in the Fish Bay, Coral Bay and the STEER. Benthic habitat maps were developed for approximately 64.3 square kilometers of seafloor in and around Fish Bay, Coral Bay and the STEER. Twenty seven percent (17.5 square kilometers) of these habitat maps describe the seafloor inside the boundaries of the STEER, the Virgin Islands National Park and the Virgin Islands Coral Reef National Monument. The remaining 73% (46.8 square kilometers) describe the seafloor outside of these MPA boundaries. These habitat maps were developed using a combination of semi-automated and manual classification methods. Habitats were interpreted from aerial photographs and LiDAR (Light Detection and Ranging) imagery. In total, 155 distinct combinations of habitat classes describing the geology and biology of the seafloor were identified from the source imagery.

A guide to the freshwater fauna of Ceylon

Freshwater animals are of importance in the economy of most countries. In recent years the scientific cultivation of freshwater fish for food has been spreading throughout South-East Asia and the Far-East. New and useful species of fish have been introduced into many countries including Ceylon where the older system of trapping any variety of fish that is available is being replaced by scientifically planned management with a view to increasing the production of good quality fish. Considerable quantities of food mainly in the form of fish are being taken from our freshwaters, providing a cheap source of much needed protein in the diet of the villager. More recently large quantities of freshwater fish are being consumed by the urban population.

The time-resolved flow within an unsteady ejector

The flow field within an unsteady ejector has been investigated using experimental and computational techniques. The experimental results show a peak thrust augmentation of 1.4; numerical simulation gives a value of 1.37. It is shown that the vortex ring dominates the flow field. At optimal thrust augmentation the vortex ring acts like a fluid piston accelerating the fluid inside the ejector. A model is proposed for the operation of unsteady ejectors, based on the vortex ring acting like a fluid piston. Control volume analysis is presented showing that mass entrainment is responsible for thrust augmentation. It is proposed that the spacing of successive vortex rings determines the mass entrainment and therefore thrust augmentation. The efficiency of unsteady ejectors was found to vary between 28% and 32% depending on the L/D ratio of the unsteady jet source. Copyright © 2008 by J H Heffer.

Distribution of rDNA in the nucleus of Giardia lamblia - Detection by Ag-I silver stain

OBJECTIVE: To determine whether rDNA of Giardia lamblia forms a nucleolus organizer region (NOR)-like structure and is in a very primitive state. STUDY DESIGN: G lamblia was used as the experimental animal, with Euglena gracilis as the control. The distribution was demonstrated indirectly by the modified Ag-I silver technique, which can specifically indicate the NOR under both light and electron microscopes. RESULTS: In the ultrathin sections of silver-stained Euglena cells, all the silver grains were concentrated in the fibrosa of the nucleolus, while no grains found in the cytoplasm, nucleoplasm, condensed chromosomes or pars granulosa of the nucleus. In the silver-stained Giardia cells, no nucleolus was found; a few silver grains were scattered in the nucleus but were not concentrated in any specific region. CONCLUSION: The distribution of silver grains in G lamblia showed that the transcription of rDNA occurs inside the nucleus, though no nucleolus is present. It is possible that chromosomes are in a very primitive state in diplomonad cells; as each chromosome has few prRNA genes, the transcription is independent of a nucleolus. These results imply that the rDNA of Giardia does not form a NOR-like structure and seems to represent a very primitive state in the evolution of the nucleolus.

Investigation of the effect of combustor cooling geometry on acoustic energy absorption

To control combustion instabilities occurring in LPP gas turbine combustors, several active and passive systems have been developed in recent years. The combustion chamber cooling geometry has the potential to influence instability feedback loops by absorbing acoustical energy inside the combustor. The design of the cooling liner and the geometry of the cooling plenum and the cooling air flow rate have a significant influence on the absorption characteristics of the system. This paper presents the results of a cold flow study which was carried out in the course of a comprehensive study on the influence of the cooling geometry on combustor thermoacoustics. Absorption characteristics of three different cooling liner geometries and non-perforated plates were determined over a frequency range from 50 Hz to 600 Hz for different cooling flow rates and different cooling plenum volumes. The experimental results compared well with results from a low order thermoacoustic network model. The acoustic energy absorption spectrum of a cooling liner with 90°-hole configuration was found to be strongly dependent on cooling flow rate and cooling plenum volume, whereas the absorption spectrum of cooling liners with 25°-holes were found to be strongly dependent on the cooling plenum volume, but less dependent on the cooling air flow rate. All cooling liner setups with perforations were capable of increased acoustic absorption over a broad band of frequencies compared to the case of non-perforated combustor walls. © 2010 by Johannes Schmidt.

The effect of salinity on some endocommensalic ciliates from shipworms

The ciliates, Nucleocorbula adherens, Boveria teredinidi, Trichodina balakrishnia, Thingmozoon fencheli and Nyctothereus marina, live inside the mantle cavity of the shipworms in the estuaries and backwaters of the south-west coast of India. Seasonal incidence and relative abundance of these ciliates showed that they were more abundant during the low saline than the high saline periods. Even though these ciliates can endure higher salinities through gradual acclimatization of their habitat it was found that they prefer low salinity for active growth and healthy existence.

Improving productivity - Opening the black box

Hourly productivity levels in the UK still remain behind those in some competitor countries. The government devotes much policy attention to enhancing productivity and continues to emphasise its five drivers - investment, innovation, skills, enterprise, and competition. This article argues that it is investment broadly defined that is the key to sustained productivity improvement. The emphasis should be on improving productivity simultaneously with improving the quality of production. Only thus will the gains be widely shared. In achieving these aims there are two prerequisites for policy-makers. The first is to ensure better coordination of policy than appears to be currently achieved by the present departmental structures in Whitehall. The second is to recognize fully the long and complex chain of causation that can be triggered by pulling on one policy lever. Such complexity can only be fully understood by more research on what actually goes on inside the black box of the organization. © 2006 Oxford University Press.

Interactions between building integrated photovoltaics and microclimate in urban environments

BIPV (building integrated photovoltaics) has progressed in the past years and become an element to be considered in city planning. BIPV has significant influence on microclimate in urban environments and the performance of BIPV is also affected by urban climate. The thermal model and electrical performance model of ventilated BIPV are combined to predict PV temperature and PV power output in Tianjin, China. Then, by using dynamic building energy model, the building cooling load for installing BIPV is calculated. A multi-layer model AUSSSM of urban canopy layer is used to assess the effect of BIPV on the Urban Heat Island (UHI). The simulation results show that in comparison with the conventional roof, the total building cooling load with ventilation PV roof may be decreased by 10%. The UHI effect after using BIPV relies on the surface absorptivity of original building. In this case, the daily total PV electricity output in urban areas may be reduced by 13% compared with the suburban areas due to UHI and solar radiation attenuation because of urban air pollution. The calculation results reveal that it is necessary to pay attention to and further analyze interactions between BIPV and microdimate in urban environments to decrease urban pollution, improve BIPV performance and reduce cooling load. Copyright © 2006 by ASME.

Effect of building integrated photovoltaics on microclimate of urban canopy layer

Building integrated photovoltaics (BIPV) has potential of becoming the mainstream of renewable energy in the urban environment. BIPV has significant influence on the thermal performance of building envelope and changes radiation energy balance by adding or replacing conventional building elements in urban areas. PTEBU model was developed to evaluate the effect of photovoltaic (PV) system on the microclimate of urban canopy layer. PTEBU model consists of four sub-models: PV thermal model, PV electrical performance model, building energy consumption model, and urban canyon energy budget model. PTEBU model is forced with temperature, wind speed, and solar radiation above the roof level and incorporates detailed data of PV system and urban canyon in Tianjin, China. The simulation results show that PV roof and PV façade with ventilated air gap significantly change the building surface temperature and sensible heat flux density, but the air temperature of urban canyon with PV module varies little compared with the urban canyon of no PV. The PV module also changes the magnitude and pattern of diurnal variation of the storage heat flux and the net radiation for the urban canyon with PV increase slightly. The increase in the PV conversion efficiency not only improves the PV power output, but also reduces the urban canyon air temperature. © 2006.

Effect of urban climate on building integrated photovoltaics performance

It is generally recognized that BIPV (building integrated photovoltaics) has the potential to become a major source of renewable energy in the urban environment. The actual output of a PV module in the field is a function of orientation, total irradiance, spectral irradiance, wind speed, air temperature, soiling and various system-related losses. In urban areas, the attenuation of solar radiation due to air pollution is obvious, and the solar spectral content subsequently changes. The urban air temperature is higher than that in the surrounding countryside, and the wind speed in urban areas is usually less than that in rural areas. Three different models of PV power are used to investigate the effect of urban climate on PV performance. The results show that the dimming of solar radiation in the urban environment is the main reason for the decrease of PV module output using the climatic data of urban and rural sites in Mexico City for year 2003. The urban PV conversion efficiency is higher than that of the rural PV system because the PV module temperature in the urban areas is slightly lower than that in the rural areas in the case. The DC power output of PV seems to be underestimated if the spectral response of PV in the urban environment is not taken into account based on the urban hourly meteorological data of Sao Paulo for year 2004. © 2006 Elsevier Ltd. All rights reserved.

Studies on distribution, diversity and production of macrobenthic fauna in the Chahbahar Bay

The population density, distribution, diversity and secondry production of macrobenthic fauna of the inner Chahbahar Bay were studied through bi-monthly sampling from April 1995 to March 1996. Samples were collected from water near the bottom and sediment at 14 stations inside the Bay and one reference station located outside at the entrance to the Bay. The environmental parameters Such as temperature, water depth, salinity, pH and dissolved oxygen as well as percentage silt-clay and total organic matter of the sediment were measured. The faunal population density and their distribution is discussed in relation to the environmental changes. results obtained indicated both spatial and temporal heterogeneity in faunal distribution of the Chahbahar Bay. The total of 18 groups of macrofauna were identified in all samples. Amphipods formed the dominant group (21%) followed by polychaetes (19%), gastropods (15.7%) bivalves (10.6%) and all other groups (33.7%). Seasonal changes in faunal density is shown in relation to Indian Ocean southwest monsoon,the result of which indicated lower population density during monsoon (June to September) than that of the premonsoon (February to May) and post monsoon (October to January) periods. The numerical abundance of macrobenthos varied from 10260.m2 before monsoon to 5190 m2 during monsoon season. Three dominant groups of macrofauna including polychaetes, gastropods, and bivalves were identified in all collected samples. Indices of diversity, richness and evenness were calculated for these three dominant groups. The Shannon-Weaver information index was used to describe the spatially and temporally variation in diversity of these three major faunal groups. The results exhibited lower faunal diversity during monsoon period. The annual production of two dominant macrofauna species including a species of bivalve, Nuculana acuta and a species of Cephalochordata, Branchiostoma lanceolatum were measured by using age group determination. Furthermore the mean biomass and total annual production of macrobenthic fauna were estimated for the whole studied area. The potential yield of demersal fishery resources (fish and crustacean) then estimated and worked out to be 15360 tons/year asuming 10% ecological efficiency of hypothetical pyramid from 3rd to 4th marine trophic level. Accordingly the annual exploitable demersal fishery resources for the entire Chahbahar Bay was estimated to be 7600 to 8500 tons/year by taking 50 to 55% of the total estimated potential in to account.

The internal structure of igniting turbulent sprays as revealed by complex chemistry DNS

A parametric study of spark ignition in a uniform monodisperse turbulent spray is performed with complex chemistry three-dimensional Direct Numerical Simulations in order to improve the understanding of the structure of the ignition kernel. The heat produced by the kernel increases with the amount of fuel evaporated inside the spark volume. Moreover, the heat sink by evaporation is initially higher than the heat release and can have a negative effect on ignition. With the sprays investigated, heat release occurs over a large range of mixture fractions, being high within the nominal flammability limits and finite but low below the lean flammability limit. The burning of very lean regions is attributed to the diffusion of heat and species from regions of high heat release, and from the spark, to lean regions. Two modes of spray ignition are reported. With a relatively dilute spray, nominally flammable material exists only near the droplets. Reaction zones are created locally near the droplets and have a non-premixed character. They spread from droplet to droplet through a very lean interdroplet spacing. With a dense spray, the hot spark region is rich due to substantial evaporation but the cold region remains lean. In between, a large surface of flammable material is generated by evaporation. Ignition occurs there and a large reaction zone propagates from the rich burned region to the cold lean region. This flame is wrinkled due to the stratified mixture fraction field and evaporative cooling. In the dilute spray, the reaction front curvature pdf contains high values associated with single droplet combustion, while in the dense spray, the curvature is lower and closer to the curvature associated with gaseous fuel ignition kernels. © 2011 The Combustion Institute.

A new apparatus for modelling excavations

Underground space is commonly exploited both to maximise the utility of costly land in urban development and to reduce the vertical load acting on the ground. Deep excavations are carried out to construct various types of underground infrastructure such as deep basements, subways and service tunnels. Although the soil response to excavation is known in principle, designers lack practical calculation methods for predicting both short- and long-term ground movements. As the understanding of how soil behaves around an excavation in both the short and long term is insufficient and usually empirical, the judgements used in design are also empirical and serious accidents are common. To gain a better understanding of the mechanisms involved in soil excavation, a new apparatus for the centrifuge model testing of deep excavations in soft clay has been developed. This apparatus simulates the field construction sequence of a multi-propped retaining wall during centrifuge flight. A comparison is given between the new technique and the previously used method of draining heavy fluid to simulate excavation in a centrifuge model. The new system has the benefit of giving the correct initial ground conditions before excavation and the proper earth pressure distribution on the retaining structures during excavation, whereas heavy fluid only gives an earth pressure coefficient of unity and is unable to capture any changes in the earth pressure coefficient of soil inside the zone of excavation, for example owing to wall movements. Settlements of the ground surface, changes in pore water pressure, variations in earth pressure, prop forces and bending moments in the retaining wall are all monitored during excavation. Furthermore, digital images taken of a cross-section during the test are analysed using particle image velocimetry to illustrate ground deformation and soil-structure interaction mechanisms. The significance of these observations is discussed.