Damage propagation in composite Materials meso-mechanical models

Composite materials have a complex behavior, which is difficult to predict under different types of loads. In the course of this dissertation a methodology was developed to predict failure and damage propagation of composite material specimens. This methodology uses finite element numerical models created with Ansys and Matlab softwares. The methodology is able to perform an incremental-iterative analysis, which increases, gradually, the load applied to the specimen. Several structural failure phenomena are considered, such as fiber and/or matrix failure, delamination or shear plasticity. Failure criteria based on element stresses were implemented and a procedure to reduce the stiffness of the failed elements was prepared. The material used in this dissertation consist of a spread tow carbon fabric with a 0°/90° arrangement and the main numerical model analyzed is a 26-plies specimen under compression loads. Numerical results were compared with the results of specimens tested experimentally, whose mechanical properties are unknown, knowing only the geometry of the specimen. The material properties of the numerical model were adjusted in the course of this dissertation, in order to find the lowest difference between the numerical and experimental results with an error lower than 5% (it was performed the numerical model identification based on the experimental results).

Understanding multi-asset factor models: Factor exposure interpretation

Field lab: Business project

Orthogonal models, structure crossing, nesting and inference

We intend to study the algebraic structure of the simple orthogonal models to use them, through binary operations as building blocks in the construction of more complex orthogonal models. We start by presenting some matrix results considering Commutative Jordan Algebras of symmetric matrices, CJAs. Next, we use these results to study the algebraic structure of orthogonal models, obtained by crossing and nesting simpler ones. Then, we study the normal models with OBS, which can also be orthogonal models. We intend to study normal models with OBS (Orthogonal Block Structure), NOBS (Normal Orthogonal Block Structure), obtaining condition for having complete and suffcient statistics, having UMVUE, is unbiased estimators with minimal covariance matrices whatever the variance components. Lastly, see ([Pereira et al. (2014)]), we study the algebraic structure of orthogonal models, mixed models whose variance covariance matrices are all positive semi definite, linear combinations of known orthogonal pairwise orthogonal projection matrices, OPOPM, and whose least square estimators, LSE, of estimable vectors are best linear unbiased estimator, BLUE, whatever the variance components, so they are uniformly BLUE, UBLUE. From the results of the algebraic structure we will get explicit expressions for the LSE of these models.

Ajustamento pelo risco : da conceptualização à operacionalização

RESUMO - As organizações de saúde, em geral, e os hospitais, em particular, são frequentemente reconhecidos por terem particularidades e especificidades que conferem uma especial complexidade ao seu processo produtivo e à sua gestão (Jacobs, 1974; Butler, 1995). Neste sentido, na literatura hospitalar emergem alguns temas como prioritários tanto na investigação como na avaliação do seu funcionamento, nomeadamente os relacionados com a produção, com o financiamento, com a qualidade, com a eficiência e com a avaliação do seu desempenho. O estado da arte da avaliação do desempenho das organizações de saúde parece seguir a trilogia definida por Donabedian (1985) — Estrutura, Processo e Resultados. Existem diversas perspectivas para a avaliação do desempenho na óptica dos Resultados — efectividade, eficiência ou desempenho financeiro. No entanto, qualquer que seja a utilizada, o ajustamento pelo risco é necessário para se avaliar a actividade das organizações de saúde, como forma de medir as características dos doentes que podem influenciar os resultados de saúde. Como possíveis indicadores de resultados, existem a mortalidade (resultados finais), as complicações e as readmissões (resultados intermédios). Com excepção dos estudos realizados por Thomas (1996) e Thomas e Hofer (1998 e 1999), praticamente ninguém contesta a relação entre estes indicadores e a efectividade dos cuidados. Chamando, no entanto, a atenção para a necessidade de se definirem modelos de ajustamento pelo risco e ainda para algumas dificuldades conceptuais e operacionais para se atingir este objectivo. Em relação à eficiência técnica dos hospitais, os indicadores tradicionalmente mais utilizados para a sua avaliação são os custos médios e a demora média. Também neste domínio, a grande maioria dos estudos aponta para que a gravidade aumenta o poder justificativo do consumo de recursos e que o ajustamento pelo risco é útil para avaliar a eficiência dos hospitais. Em relação aos sistemas usados para medir a severidade e, consequentemente, ajustar pelo risco, o seu desenvolvimento apresenta, na generalidade, dois tipos de preocupações: a definição dos suportes de recolha da informação e a definição dos momentos de medição. Em última instância, o dilema que se coloca reside na definição de prioridades e daquilo que se pretende sacrificar. Quando se entende que os aspectos financeiros são determinantes, então será natural que se privilegie o recurso quase exclusivo a elementos dos resumos de alta como suporte de recolha da informação. Quando se defende que a validade de construção e de conteúdo é um aspecto a preservar, então o recurso aos elementos dos processos clínicos é inevitável. A definição dos momentos de medição dos dados tem repercussões em dois níveis de análise: na neutralidade económica do sistema e na prospectividade do sistema. O impacto destas questões na avaliação da efectividade e da eficiência dos hospitais não é uma questão pacífica, visto que existem autores que defendem a utilização de modelos baseados nos resumos de alta, enquanto outros defendem a supremacia dos modelos baseados nos dados dos processos clínicos, para finalmente outros argumentarem que a utilização de uns ou outros é indiferente, pelo que o processo de escolha deve obedecer a critérios mais pragmáticos, como a sua exequibilidade e os respectivos custos de implementação e de exploração. Em relação às possibilidades que neste momento se colocam em Portugal para a utilização e aplicação de sistemas de ajustamento pelo risco, verifica-se que é praticamente impossível a curto prazo aplicar modelos com base em dados clínicos. Esta opção não deve impedir que a médio prazo se altere o sistema de informação dos hospitais, de forma a considerar a eventualidade de se utilizarem estes modelos. Existem diversos problemas quando se pretendem aplicar sistemas de ajustamento de risco a populações diferentes ou a subgrupos distintos das populações donde o sistema foi originalmente construído, existindo a necessidade de verificar o ajustamento do modelo à população em questão, em função da sua calibração e discriminação.

Cultural journalism in a digital environment : new models, practices and possibilities

Both culture coverage and digital journalism are contemporary phenomena that have undergone several transformations within a short period of time. Whenever the media enters a period of uncertainty such as the present one, there is an attempt to innovate in order to seek sustainability, skip the crisis or find a new public. This indicates that there are new trends to be understood and explored, i.e., how are media innovating in a digital environment? Not only does the professional debate about the future of journalism justify the need to explore the issue, but so do the academic approaches to cultural journalism. However, none of the studies so far have considered innovation as a motto or driver and tried to explain how the media are covering culture, achieving sustainability and engaging with the readers in a digital environment. This research examines how European media which specialize in culture or have an important cultural section are innovating in a digital environment. Specifically, we see how these innovation strategies are being taken in relation to the approach to culture and dominant cultural areas, editorial models, the use of digital tools for telling stories, overall brand positioning and extensions, engagement with the public and business models. We conducted a mixed methods study combining case studies of four media projects, which integrates qualitative web features and content analysis, with quantitative web content analysis. Two major general-interest journalistic brands which started as physical newspapers – The Guardian (London, UK) and Público (Lisbon, Portugal) – a magazine specialized in international affairs, culture and design – Monocle (London, UK) – and a native digital media project that was launched by a cultural organization – Notodo, by La Fábrica – were the four case studies chosen. Findings suggest, on one hand, that we are witnessing a paradigm shift in culture coverage in a digital environment, challenging traditional boundaries related to cultural themes and scope, angles, genres, content format and delivery, engagement and business models. Innovation in the four case studies lies especially along the product dimensions (format and content), brand positioning and process (business model and ways to engage with users). On the other hand, there are still perennial values that are crucial to innovation and sustainability, such as commitment to journalism, consistency (to the reader, to brand extensions and to the advertiser), intelligent differentiation and the capability of knowing what innovation means and how it can be applied, since this thesis also confirms that one formula doesn´t suit all. Changing minds, exceeding cultural inertia and optimizing the memory of the websites, looking at them as living, organic bodies, which continuously interact with the readers in many different ways, and not as a closed collection of articles, are still the main challenges for some media.

The characteristics of social entrepreneurship business models in Portugal

This work project is based on the MIES (Map of Innovation and Social Entrepreneurship in Portugal) database and it aims to understand the characteristics of social business models in the context of the portuguese market, by determining whether they follow the proposed characteristics by John Elkington and Pamela Hartigan, and then adding to their matrix. Furthermore, it tries to determine success patterns by comparing a group of successful social ventures with a group of less successful ones, with the objective of increasing the knowledge of social entrepreneurship as it applies to Portugal and provide a framework for future study.

Definition, implementation and management of m.commerce apps and services

This report aims to analyse the Definition, Implementation and Management of Vodafone Portugal’s Apps and Services, so that possible ways of improvement can be suggested. To do so, Vodafone’s strategy regarding the development/ implementation of specific Apps and Services, as well as the strategy of its competitors are going to be analysed. This analysis is going to be complemented with insights from some key-persons of Vodafone’s Consumer Business Unit team in Portugal. Findings suggest that Vodafone is ahead of its competitors when it comes to developing the most innovative Apps and Services, but there is always room for improvements, especially when it comes to communication.

As peculiaridades da democratização da região do Cáucaso do Sul no contexto da Política Europeia de Vizinhança

O período após o colapso da União Soviética foi o tempo da procura de novas identidades na nova realidade e de escolha de novos parceiros e aliados, o tempo da construção de novos estados e de formulação das regras e normas nacionais. Após o desmoronamento da ideologia soviética - um facto reconhecido oficialmente durante o período da Perestroika –, as pessoas sentiram uma necessidade de preencher o vácuo ideológico e desenvolver uma nova identidade. Foi proclamada a rejeição da estrutura política administrativa herdada da União Soviética e do sistema de economia planificada, e desenvolvida a tendência para a construção do estado democrático fundado numa economia de mercado. As expectativas relativas às transformações no período pós-soviético estavam relacionadas com o Ocidente (EUA e UE), e a construção do estado soberano foi fundada em modelos ocidentais de estado de direito, ‘boa governança’ e a economia de mercado. A UE desempenhou um papel importante na democratização dos estados da região do Sul do Cáucaso através de vários projetos e programas bilaterais e multilaterais no âmbito da Política Europeia de Vizinhança e da Parceria Oriental. Embora as reformas democráticas tenham sido realizadas com vista ao estabelecimento de uma Constituição democrática, à implementação de eleições democráticas e ao desenvolvimento da sociedade civil, fortaleceram, também, ainda mais, a natureza autoritária do poder, impediram a criação de um estado de direito, reforçaram violação dos direitos e das liberdades humanas. (NODIYA, 2003: 30; BAKHMAN, 2003: 17; BADALOV, 2003: 20). Deste modo, o processo da promoção da democracia através das reformas nos três estados do Sul do Cáucaso conduziu à criação de estados de “conteúdo autocrático misto, mas de forma democrática” (CHETERYAN, 2003: 41). Embora seja possível identificar as semelhanças entre os três estados da região do Sul do Cáucaso nas reformas do processo de desenvolvimento, os métodos e meios de implementação de reformas nas realidades dos estados regionais pela administração nacional foram bastante diferentes, por razões associadas às especificidades de cada um (DELCOUR e WOLCZUK, 2013: 3). Cada país é caracterizado pelas suas peculiaridades ao nível da situação geopolítica e diversidade do potencial económico – fatores que definem a trajetória política e económica do estado no período pós-soviético e, em certa medida, influenciam o modo como se desenvolvem as relações com a UE e, portanto, o processo de adoção das reformas e a sua introdução a nível nacional.

Implementation of a probabilistic based framework for safety assessment of existing timber elements

The assessment of existing timber structures is often limited to information obtained from non or semi destructive testing, as mechanical testing is in many cases not possible due to its destructive nature. Therefore, the available data provides only an indirect measurement of the reference mechanical properties of timber elements, often obtained through empirical based correlations. Moreover, the data must result from the combination of different tests, as to provide a reliable source of information for a structural analysis. Even if general guidelines are available for each typology of testing, there is still a need for a global methodology allowing to combine information from different sources and infer upon that information in a decision process. In this scope, the present work presents the implementation of a probabilistic based framework for safety assessment of existing timber elements. This methodology combines information gathered in different scales and follows a probabilistic framework allowing for the structural assessment of existing timber elements with possibility of inference and updating of its mechanical properties, through Bayesian methods. The probabilistic based framework is based in four main steps: (i) scale of information; (ii) measurement data; (iii) probability assignment; and (iv) structural analysis. In this work, the proposed methodology is implemented in a case study. Data was obtained through a multi-scale experimental campaign made to old chestnut timber beams accounting correlations of non and semi-destructive tests with mechanical properties. Finally, different inference scenarios are discussed aiming at the characterization of the safety level of the elements.

Integration of geometric consistency contributory factors in three-leg junctions collision prediction models of Portuguese two-lane national highways

This paper aims at developing a collision prediction model for three-leg junctions located in national roads (NR) in Northern Portugal. The focus is to identify factors that contribute for collision type crashes in those locations, mainly factors related to road geometric consistency, since literature is scarce on those, and to research the impact of three modeling methods: generalized estimating equations, random-effects negative binomial models and random-parameters negative binomial models, on the factors of those models. The database used included data published between 2008 and 2010 of 177 three-leg junctions. It was split in three groups of contributing factors which were tested sequentially for each of the adopted models: at first only traffic, then, traffic and the geometric characteristics of the junctions within their area of influence; and, lastly, factors which show the difference between the geometric characteristics of the segments boarding the junctionsâ area of influence and the segment included in that area were added. The choice of the best modeling technique was supported by the result of a cross validation made to ascertain the best model for the three sets of researched contributing factors. The models fitted with random-parameters negative binomial models had the best performance in the process. In the best models obtained for every modeling technique, the characteristics of the road environment, including proxy measures for the geometric consistency, along with traffic volume, contribute significantly to the number of collisions. Both the variables concerning junctions and the various national highway segments in their area of influence, as well as variations from those characteristics concerning roadway segments which border the already mentioned area of influence have proven their relevance and, therefore, there is a rightful need to incorporate the effect of geometric consistency in the three-leg junctions safety studies.

Generic system for human-computer gesture interaction: applications on sign language recognition and robotic soccer refereeing

Hand gestures are a powerful way for human communication, with lots of potential applications in the area of human computer interaction. Vision-based hand gesture recognition techniques have many proven advantages compared with traditional devices, giving users a simpler and more natural way to communicate with electronic devices. This work proposes a generic system architecture based in computer vision and machine learning, able to be used with any interface for human-computer interaction. The proposed solution is mainly composed of three modules: a pre-processing and hand segmentation module, a static gesture interface module and a dynamic gesture interface module. The experiments showed that the core of visionbased interaction systems could be the same for all applications and thus facilitate the implementation. For hand posture recognition, a SVM (Support Vector Machine) model was trained and used, able to achieve a final accuracy of 99.4%. For dynamic gestures, an HMM (Hidden Markov Model) model was trained for each gesture that the system could recognize with a final average accuracy of 93.7%. The proposed solution as the advantage of being generic enough with the trained models able to work in real-time, allowing its application in a wide range of human-machine applications. To validate the proposed framework two applications were implemented. The first one is a real-time system able to interpret the Portuguese Sign Language. The second one is an online system able to help a robotic soccer game referee judge a game in real time.

Generic system for human-computer gesture interaction

Hand gestures are a powerful way for human communication, with lots of potential applications in the area of human computer interaction. Vision-based hand gesture recognition techniques have many proven advantages compared with traditional devices, giving users a simpler and more natural way to communicate with electronic devices. This work proposes a generic system architecture based in computer vision and machine learning, able to be used with any interface for humancomputer interaction. The proposed solution is mainly composed of three modules: a pre-processing and hand segmentation module, a static gesture interface module and a dynamic gesture interface module. The experiments showed that the core of vision-based interaction systems can be the same for all applications and thus facilitate the implementation. In order to test the proposed solutions, three prototypes were implemented. For hand posture recognition, a SVM model was trained and used, able to achieve a final accuracy of 99.4%. For dynamic gestures, an HMM model was trained for each gesture that the system could recognize with a final average accuracy of 93.7%. The proposed solution as the advantage of being generic enough with the trained models able to work in real-time, allowing its application in a wide range of human-machine applications.

Assessing student individual performance within PBL teams: findings from the implementation of a new mechanism

This paper reports on the experience of the implementation of a new mechanism to assess individual student contribution within project work, where students work in teams to solve a large-scale open-ended interdisciplinary project. The study takes place at the University of Minho, with first year engineering students, enrolled in the Industrial Management and Engineering (Integrated Masters) degree. The aim of this paper is to describe the main principles and procedures underlying the assessment mechanism created and also provide some feedback from its first implementation, based on the students, lecturers and tutors perceptions. For data collection, a survey was sent to all course lecturers and tutors involved in the assessment process. Students also contributed with suggestions, both on a workshop held at the end of the project and also by answering a survey on the overall satisfaction with PBL experience. Findings show a positive level of acceptance of the new mechanism by the students and also by the lecturers and tutors. The study identified the need to clarify the criteria used by the lecturers and the exact role of the tutor, as well as the need for further improvement of its features and procedures. Some recommendations are also issued regarding technical aspects related to some of the steps of the procedures, as well as the need for greater support on the adjustment and final setting of the individual grades.

Implementation of a lean six sigma project in a production line

Companies from the motorcycles components branch are dealing with a dynamic environment, resulting from the introduction of new products and the increase of market demand. This dynamic environment requires frequent changes in production lines and requires flexibility in the processes, which can cause reductions in the level of quality and productivity. This paper presents a Lean Six Sigma improvement project performed in a production line of the company's machining sector, in order to eliminate losses that cause low productivity, affecting the fulfillment of the production plan and customer satisfaction. The use of Lean methodology following the DMAIC stages allowed analyzing the factors that influence the line productivity loss. The major problems and causes that contribute to a reduction on productivity and that were identified in this study are the lack of standardization in the setup activities and the excessive stoppages for adjustment of the processes that caused an increase of defects. Control charts, Pareto analysis and cause-and-effect diagrams were used to analyze the problem. On the improvement stage, the changes were based on the reconfiguration of the line layout as well as the modernization of the process. Overall, the project justified an investment in new equipment, the defective product units were reduced by 84% and an increase of 29% of line capacity was noticed.

Implementation and comparison of different switching techniques for shunt active power filters

This paper presents a comparison between three switching techniques that can be used in three-phase four-wire Shunt Active Power Filters (SAPFs). The implemented switching techniques are: Periodic-Sampling (PS), Triangular Carrier Pulse-Width Modulation (TC-PWM) and Space Vector PWM (SVPWM). The comparison between them is made in terms of the compensated currents THD%, implementation complexity, necessary CPU time and SAPF efficiency. To perform this comparison are presented and analyzed several experimental results, obtained with a 20 kVA Shunt Active Power Filter prototype, specially developed for this purpose. The control system of the developed SAPF is based in the p-q Theory with a grid synchronization algorithm p-PLL.