Thermal stability and thermal decomposition of sucralose

Several papers have been described on the thermal stability of the sweetener, C12H19Cl3O8 (Sucralose). Nevertheless no study using thermoanalytical techniques was found in the literature. Simultaneous thermogravimetry and differential thermal analysis (TG-DTA), differential scanning calorimetry (DSC) and infrared spectroscopy, have been used to study the thermal stability and thermal decomposition of sweetener.

Synthesis, characterization and thermal behaviour of solid 2-methoxycinnamylidenepyruvate of some bivalent metal ions in CO2 and N2 atmospheres

Solid State M-2-MeO-CP compounds, where M stands for bivalent metals (Mn, Fe, Co, Ni, Cu and Zn) and 2-MeO-CP is 2-methoxycinnamylidenepyruvate, were synthesized. Simultaneous thermogravimetry and differential thermal analysis (TG-DTA), differential scanning calorimetry (DSC), elemental analysis and complexometry were used to establish the stoichiometry and to study the thermal behaviour of these compounds in CO2 and N2 atmospheres. The results were consistent with the general formula: M(L)2∙H2O. In both atmospheres (CO2, N2) the thermal decomposition occurs in consecutive steps which are characteristic of each compound. For CO2 atmosphere the final residues were: Mn3O4, Fe3O4, Co3O4, NiO, Cu2O and ZnO, while under N2 atmosphere the thermal decomposition is still observed at 1000 º C.

Synthesis, characterization and thermal behaviour of heavy trivalent lanthanide malonates

Solid-state Ln-L compounds, where Ln stands for heavy trivalent lanthanides (Tb-Lu) and L is malonate, have been synthesized. Simultaneous thermogravimetry and differential thermal analysis (TG-DTA), differential scanning calorimetry (DSC), X-ray powder diffractometry, infrared spectroscopy, TG-FTIR system, elemental analysis and complexometry were used to characterize and to study the thermal behaviour of these compounds. The dehydration of the compounds begins at 303 K and the anhydrous compounds are stable up to 548 K. The results also provided information concerning the ligand's denticity, thermal behaviour and identification of some gaseous products evolved during the thermal decomposition of these compounds.

Kielikylpydidaktiikkaa kehittämässä : 3-6-vuotiaiden kielikylpylasten kielellinen kehitys ja kielikylpydidaktiikan kehittäminen päiväkodissa

The goal of this study is to determine the naming ability in Finnish and Swedish of nursery school-aged children participating in a language immersion programme, as well as their command of both languages. The study also aims to describe factors reflecting language immersion teaching in nursery schools based on action research and a literature survey. The longitudinal study, conducted in 2003–2005, comprised 133 native Finnish three- to six-year-old children in language immersion programmes. A total of four measurements were carried out over two and a half years. In each measurement, four separate tests were given to each child (totally 1134 measurements). Research material was collected using survey tools that measured the children’s naming ability and command of language. The tools had been translated into both Finnish and Swedish. The material also includes taped responses related to the tool for naming ability. Didactic approaches were developed on the basis of material from action research and the literature survey. The material was examined using methodological triangulation, and a quantitative analysis was made of each survey tool. Furthermore, a content analysis of the children’s taped responses gave further depth to the description of language development. The theoretical framework of the study is mainly based on modern sociocultural theories of second language development and acquisition. Thus, the approach is both linguistic and pedagogic, with emphasis lying on the latter. The socioculturally-oriented framework of this study is mainly influenced by the theorists Vygotski, Spolsky, van Lier and Cummins. According to the results, the language skills of children in language immersion programmes develop as expected from age three to six in the fields studied. In the field of language command, the children acquired excellent skills in listening comprehension. Their naming ability was not as good. In each test, the children showed weaker skills in Swedish than in Finnish. However, based on the assumption that the two languages have a shared cognitive field, the skills in Swedish catch up with the skills in Finnish at an annual rate of 6–7 per cent. The study indicates that children meet a language development threshold one year earlier in their native language than they do in the immersion language. As for the naming ability in Swedish, problems arose from the fact that the deviation in results increases with age. Children showed creativity in their use of naming strategies. Judging by the research results, children begin to use the immersion language as a tool for thought at a very early phase. The research results, action research and literature survey were also used to create a general educational model for language immersion.

Wood consumption rates of forest species by subterranean termites (Isoptera) under field conditions

Termites are well -known for their capacity to damage and destroy wood and wood products of all kinds in the tropics and subtropics. A field test was undertaken to evaluate variations in wood consumption of Pinus sp. and three species of Eucalyptus by subterranean termites. The test consisted of wooden stakes of each species being initially submitted to water immersion for 0, 24, 48 and 72 h, and buried in the ground to natural infestation by subterranean termites for an exposure period of 30, 45 and 60 days. Three species of subterranean termites were identified: Heterotermes longiceps (Snyder), Coptotermes gestroi (Wasmann) (Isoptera: Rhinotermitidae), and Nasutitermes jaraguae (Holmgren) (Isoptera: Termitidae). This is the first record of occurrence of H. longiceps in the state of Rio de Janeiro. Although the wood-consumption rates were not correlated significantly with their wood densities, there was a tendency of the softwoods (E. robusta and Pinus sp.) to be more consumed by subterranean termites than the woods of intermediate hardness (E. pellita and E. urophylla). Among the eucalyptus, E. robusta showed to be more susceptible to attack by subterranean termites than E. pellita and E. urophylla

Wood as a model material for medical biomaterials. In vivo and in vitro studies with bone and Betula pubescens Ehrh

Novel biomaterials are needed to fill the demand of tailored bone substitutes required by an ever‐expanding array of surgical procedures and techniques. Wood, a natural fiber composite, modified with heat treatment to alter its composition, may provide a novel approach to the further development of hierarchically structured biomaterials. The suitability of wood as a model biomaterial as well as the effects of heat treatment on the osteoconductivity of wood was studied by placing untreated and heat‐treated (at 220 C , 200 degrees and 140 degrees for 2 h) birch implants (size 4 x 7mm) into drill cavities in the distal femur of rabbits. The follow‐up period was 4, 8 and 20 weeks in all in vivo experiments. The flexural properties of wood as well as dimensional changes and hydroxyl apatite formation on the surface of wood (untreated, 140 degrees C and 200 degrees C heat‐treated wood) were tested using 3‐point bending and compression tests and immersion in simulated body fluid. The effect of premeasurement grinding and the effect of heat treatment on the surface roughness and contour of wood were tested with contact stylus and non‐contact profilometry. The effects of heat treatment of wood on its interactions with biological fluids was assessed using two different test media and real human blood in liquid penetration tests. The results of the in vivo experiments showed implanted wood to be well tolerated, with no implants rejected due to foreign body reactions. Heat treatment had significant effects on the biocompatibility of wood, allowing host bone to grow into tight contact with the implant, with occasional bone ingrowth into the channels of the wood implant. The results of the liquid immersion experiments showed hydroxyl apatite formation only in the most extensively heat‐treated wood specimens, which supported the results of the in vivo experiments. Parallel conclusions could be drawn based on the results of the liquid penetration test where human blood had the most favorable interaction with the most extensively heat‐treated wood of the compared materials (untreated, 140 degrees C and 200 degrees C heat‐treated wood). The increasing biocompatibility was inferred to result mainly from changes in the chemical composition of wood induced by the heat treatment, namely the altered arrangement and concentrations of functional chemical groups. However, the influence of microscopic changes in the cell walls, surface roughness and contour cannot be totally excluded. The heat treatment was hypothesized to produce a functional change in the liquid distribution within wood, which could have biological relevance. It was concluded that the highly evolved hierarchical anatomy of wood could yield information for the future development of bulk bone substitutes according to the ideology of bioinspiration. Furthermore, the results of the biomechanical tests established that heat treatment alters various biologically relevant mechanical properties of wood, thus expanding the possibilities of wood as a model material, which could include e.g. scaffold applications, bulk bone applications and serving as a tool for both mechanical testing and for further development of synthetic fiber reinforced composites.

Performance during post-harvest storage of banana cv. 'prata', 'maçã' and 'nanica' exposed to physical and chemical treatments

Banana is the most consumed fruit in the world and Brazil is the second largest producer. Despite its global position, Brazil has an average of 40% losses during the post-harvest period. So, this experiment aimed at evaluating the efficiency of post-harvest treatments to improve the storage of banana cultivars cv. 'Prata', 'Maçã' and 'Nanica'. The fruits were acquired at CEASA with green peel, and were submitted to six different treatments: T- immersion in drinking water for 3 minutes (control), H3 - hot water (50 °C for 3 minutes), H8 - hot water (50 °C for 8 minutes), HP - immersion in hypochlorite 0.2% for 3 minutes, OS - immersion in soybean oil 10% for 3 minutes, and OM - immersion in mineral oil 10% for 3 minutes. The fruits were stored at room temperature at about 21 °C for 14 days and evaluated in three periods (1, 7 and 14 days) comparing peel color, flesh/peel ratio, titratable acidity (TA), soluble solids (SS), SS/TA ratio, and pH. The fruits of cv. 'Prata' and 'Maçã' submitted to the treatments H3, H8 and HP ripened at the same time as the control for peel color, which showed increased soluble solids, flesh/peel ratio, acidity and a decrease in pH. On the other hand, the cv. 'Nanica' did not respond significantly different when compared to the applied treatments and the control. The fruits treated with OM and OS were kept green for a longer time for the cultivars 'Prata' and 'Nanica', but there were some changes on peel color due dark spots in 'Prata' banana and a softening aspect in 'Nanica', indicating some level of toxicity of these treatments. Fruits of the 'Maçã' cultivar continued green with the application of mineral oil, without toxicity symptoms. In conclusion, the treatments applied did not show any advantage for storage of these fruits.

Mathematical simulation parameters for drying of cassava starch pellets

Based on experimental tests, it was obtained the equations for drying, equilibrium moisture content, latent heat of vaporization of water contained in the product and the equation of specific heat of cassava starch pellets, essential parameters for realizing modeling and mathematical simulation of mechanical drying of cassava starch for a new technique proposed, consisting of preformed by pelleting and subsequent artificial drying of starch pellets. Drying tests were conducted in an experimental chamber by varying the air temperature, relative humidity, air velocity and product load. The specific heat of starch was determined by differential scanning calorimetry. The generated equations were validated through regression analysis, finding an appropriate correlation of the data, which indicates that by using these equations, can accurately model and simulate the drying process of cassava starch pellets.

Otantamittauksen kehittäminen osana sellutehtaan puunsyöttöä

Työn tavoitteena on selvittää, kuinka kuitupuun otantamittausprosessia voidaan tehostaa osana sellutehtaan puunkäsittelyä toimitusketjun johtamisen keinoin Stora Enson Enocellin tehtaalla. Työssä syvennytään kuitupuun mittauksen perusteisiin ja menetelmiin sekä selvitetään mittausprosessin keskeisimmät ongelmakohdat kohdeympäristössä. Ongelmakohtien ratkaisemiseksi tutustutaan toimitusketjun johtamisen teorioihin, joiden avulla muodostetaan kuvaus parhaasta mahdollisesta vaihtoehdosta uudeksi otantamittausmenetelmäksi. Ensimmäisessä vaiheessa kohdeympäristöksi rajataan Enocellin tehdas, mutta uuden menetelmän laajemman soveltuvuuden selvittämiseksi tarkastellaan työn lopuksi myös muita määrättyjä Stora Enson tehtaita. Työn tuloksena on perusteltu päätelmä siitä, mikä otantamittausmenetelmä on sekä Stora Enson että tutkimuksen teettäjänä toimivan logistiikkapalveluita ja materiaalinkäsittelykoneita tuottavan Mantsinen Group Ltd Oy:n intresseihin parhaiten sopiva. Työn lopuksi annetaan suositukset parhaaksi valitun menetelmän käyttöönoton aikatauluksi ja toimiksi.

Hematological and immunological responses of Nile tilapia after polyvalent vaccine administration by different routes

The efficacy of a polyvalent bacterin vaccine against Aeromonas hydrophila, Pseudomonas aeroginosa and Enterococcus durans administered by different routes in Nile tilapia was assessed by analyzing hematological and immunological parameters 7 and 21 days after vaccination. Treatments consisted of: non-vaccinated tilapia; tilapia vaccinated by intraperitoneal injection with 2x10(8) formalin-inactivated bacteria·mL-1; tilapia vaccinated orally with 2x10(7) formalin-inactivated bacteria·g-1, feed for 5 days; tilapia vaccinated by immersion bath in 2x10(7) formalin-inactivated bacteria·mL-1, for 20 minutes. Vaccinated fish groups presented higher hematocrit, number of erythrocytes and leukocytes than the non-vaccinated group. Serum agglutination titer of intraperitoneally vaccinated fish was higher on both evaluation periods for the three bacteria strains. Only on day 21 post-vaccination fish from the oral and immersion vaccination groups presented higher serum agglutination titer than the non-vaccinated fish for A. hidrophyla and E. durans. Serum antimicrobial activity in vaccinated fish was higher for P. aeroginosa and E. coli than in non-vaccinated fish on both evaluation periods. The different vaccine administration routes stimulated hematological and immunological responses in Nile tilapia 21 days post-vaccination, but intraperitoneal vaccination presented higher total number of leukocytes, lymphocytes and serum agglutination titer.

Tooth-Coil Permanent Magnet Synchronous Machine Design for Special Applications

This doctoral thesis presents a study on the design of tooth-coil permanent magnet synchronous machines. The electromagnetic properties of concentrated non-overlapping winding permanent magnet synchronous machines, or simply tooth-coil permanent magnet synchronous machines (TC-PMSMs), are studied in details. It is shown that current linkage harmonics play the deterministic role in the behavior of this type of machines. Important contributions are presented as regards of calculation of parameters of TC-PMSMs,particularly the estimation of inductances. The current linkage harmonics essentially define the air-gap harmonic leakage inductance, rotor losses and localized temporal inductance variation. It is proven by FEM analysis that inductance variation caused by the local temporal harmonic saturation results in considerable torque ripple, and can influence on sensorless control capabilities. Example case studies an integrated application of TC-IPMSMs in hybrid off-highway working vehicles. A methodology for increasing the efficiency of working vehicles is introduced. It comprises several approaches – hybridization, working operations optimization, component optimization and integration. As a result of component optimization and integration, a novel integrated electro-hydraulic energy converter (IEHEC) for off-highway working vehicles is designed. The IEHEC can considerably increase the operational efficiency of a hybrid working vehicle. The energy converter consists of an axial-piston hydraulic machine and an integrated TCIPMSM being built on the same shaft. The compact assembly of the electrical and hydraulic machines enhances the ability to find applications for such a device in the mobile environment of working vehicles.Usage of hydraulic fluid, typically used in working actuators, enables direct-immersion oil cooling of designed electrical machine, and further increases the torque- and power- densities of the whole device.

Motoneuronitautiin liittyvä hengitysvajaus: hengitystoiminnan ja energia-aineenvaihdunnan mittaaminen

Tavoitteet: Tämän tutkimussarjan tavoitteena oli tutkia hengitystoiminnan sekä energia-aineen¬vaihdunnan muutoksia motoneuronitautia (amyotrofinen lateraaliskleroosi, ALS) sairastavilla potilailla. Erityisenä mielenkiinnon kohteena olivat kotihoitoon soveltuvan hengityslaitteen vai¬kutus elinajan ennusteeseen sekä hengitysvajauksen etenemistä kuvaavien keuhkotoimintakokei¬den arviointi ALS-potilailla, epäsuoran kalorimetrian mittaustarkkuus ja perusaineenvaihdunnan (PAV) suuruus kajoavaa hengityslaitetta käyttävillä ALS-potilailla. Aineisto ja menetelmät: Kajoamattoman hengityslaitteen käytön ja iän vaikutusta elinajan en¬nusteeseen arvioitiin 84:llä ja hengitystoiminnan muutoksia 42 ALS-potilaalla. Epäsuoran kalo¬rimetrian mittaustarkkuutta kajoamatonta hengityslaitetta käytettäessä arvioitiin hereillä olevilla 12 vapaaehtoisella mieshenkilöllä. PAV:n suuruutta arvioitiin viidellä kajoavaa hengityslaitetta käyttävällä ALS-potilaalla. Osatöistä kaksi ensimmäistä olivat luonteeltaan havainnoivia (retros¬pektiivisiä) ja kaksi viimeistä seurantatutkimuksia (prospektiivisia). Tulokset: Alle 65-vuotiailla ALS-potilailla ei havaittu eroa elinajan ennusteessa kajoamaton¬ta hengityslaitetta käyttävien ja käyttämättömien potilaiden välillä. Sen sijaan yli 65-vuotiail¬la ALS-potilailla elinajan ennuste piteni merkittävästi kajoamatonta hengityslaitetta käyttävillä potilailla (elinaika diagnoosin jälkeen 22 vs. 8 kk, Hazard Ratio = 0.25, 95 % luottamusväli 0.11 – 0.55, p <0.001). ALS-potilailla, joilla kajoamaton hengityslaite katsottiin tarpeelliseksi kuuden kuukauden kuluessa diagnoosihetkestä, hengitystiheys osoittautui diagnoosihetkellä mer-kittävästi kiihtyneeksi (21/min) ja rintakehän liike merkittävästi alentuneeksi (2.9 cm) verrattuna ALS-potilaisiin, joille kajoamaton hengityslaite katsottiin tarpeelliseksi myöhemmin (16/min ja 4.0 cm). Kajoamattoman hengityslaitehoidon aikana keskimääräinen mitattu PAV vapaaehtoisilla miehillä oli 1858 kcal/vrk kun PAV ilman hengityslaitetta oli 1852 kcal/vrk, p = 0.8. Kajoavaa hengityslaitehoitoa käyttävien viiden ALS-potilaan keskimääräinen PAV vastaavalla mittausase¬telmalla mitattaessa oli 1130 kcal/vrk, kun vastaava PAV laskettuna viidellä eri laskentakaavalla oli 1700 kcal/vrk, p < 0.001. Johtopäätökset: Yli 65-vuotiailla ALS-potilailla, jotka eivät sopeutuneet kajoamattomaan hen¬gityslaitehoitoon, oli nelinkertainen riski menehtyä aiemmin kuin kajoamattomaan hengityslai¬tehoitoon sopeutuneilla ALS-potilailla. Hengitystiheys osoittautui merkittävästi kiihtyneeksi ja rintakehän liike alentuneeksi ALS-potilailla, joille kajoamaton hengityslaitehoito katsottiin ai¬heelliseksi kuuden kuukauden kuluessa diagnoosihetkestä. Kajoamattoman hengityslaitehoidon aikana mitattu PAV ei poikennut mitatusta PAV:sta itsenäisen hengityksen aikana. Näin ollen epäsuoraa kalorimetriamenetelmää voidaan käyttää luotettavasti PAV:n määrittämiseen käytet¬täessä samanaikaisesti kotihoitoon soveltuvaa hengityslaitehoitoa. Elämää ylläpitävää kajoavaa hengityslaitehoitoa käyttävien ALS-potilaiden PAV oli merkittävästi hidastunut laskennallisella menetelmällä arvioituun PAV verrattuna.

Liquid cooling solutions for rotating permanent magnet synchronous machines

In the design of electrical machines, efficiency improvements have become very important. However, there are at least two significant cases in which the compactness of electrical machines is critical and the tolerance of extremely high losses is valued: vehicle traction, where very high torque density is desired at least temporarily; and direct-drive wind turbine generators, whose mass should be acceptably low. As ever higher torque density and ever more compact electrical machines are developed for these purposes, thermal issues, i.e. avoidance of over-temperatures and damage in conditions of high heat losses, are becoming of utmost importance. The excessive temperatures of critical machine components, such as insulation and permanent magnets, easily cause failures of the whole electrical equipment. In electrical machines with excitation systems based on permanent magnets, special attention must be paid to the rotor temperature because of the temperature-sensitive properties of permanent magnets. The allowable temperature of NdFeB magnets is usually significantly less than 150 ˚C. The practical problem is that the part of the machine where the permanent magnets are located should stay cooler than the copper windings, which can easily tolerate temperatures of 155 ˚C or 180 ˚C. Therefore, new cooling solutions should be developed in order to cool permanent magnet electrical machines with high torque density and because of it with high concentrated losses in stators. In this doctoral dissertation, direct and indirect liquid cooling techniques for permanent magnet synchronous electrical machines (PMSM) with high torque density are presented and discussed. The aim of this research is to analyse thermal behaviours of the machines using the most applicable and accurate thermal analysis methods and to propose new, practical machine designs based on these analyses. The Computational Fluid Dynamics (CFD) thermal simulations of the heat transfer inside the machines and lumped parameter thermal network (LPTN) simulations both presented herein are used for the analyses. Detailed descriptions of the simulated thermal models are also presented. Most of the theoretical considerations and simulations have been verified via experimental measurements on a copper tooth-coil (motorette) and on various prototypes of electrical machines. The indirect liquid cooling systems of a 100 kW axial flux (AF) PMSM and a 110 kW radial flux (RF) PMSM are analysed here by means of simplified 3D CFD conjugate thermal models of the parts of both machines. In terms of results, a significant temperature drop of 40 ̊C in the stator winding and 28 ̊C in the rotor of the AF PMSM was achieved with the addition of highly thermally conductive materials into the machine: copper bars inserted in the teeth, and potting material around the end windings. In the RF PMSM, the potting material resulted in a temperature decrease of 6 ̊C in the stator winding, and in a decrease of 10 ̊C in the rotor embedded-permanentmagnets. Two types of unique direct liquid cooling systems for low power machines are analysed herein to demonstrate the effectiveness of the cooling systems in conditions of highly concentrated heat losses. LPTN analysis and CFD thermal analysis (the latter being particularly useful for unique design) were applied to simulate the temperature distribution within the machine models. Oil-immersion cooling provided good cooling capability for a 26.6 kW PMSM of a hybrid vehicle. A direct liquid cooling system for the copper winding with inner stainless steel tubes was designed for an 8 MW directdrive PM synchronous generator. The design principles of this cooling solution are described in detail in this thesis. The thermal analyses demonstrate that the stator winding and the rotor magnet temperatures are kept significantly below their critical temperatures with demineralized water flow. A comparison study of the coolant agents indicates that propylene glycol is more effective than ethylene glycol in arctic conditions.

Antinociceptive effects of Cremophor EL orally administered to mice

Surfactants are frequently used to improve solubilization of lipophilic drugs. Cremophor EL (CrEL) is a polyoxyethylated castor oil surfactant used to solubilize water-insoluble drugs such as anesthetic, antineoplastic, immunosuppressive and analgesic drugs, vitamins and new synthetic compounds, including potential analgesics. The antinociceptive effect of CrEL (3.2, 6.4 and 10.6 g/kg, in 10 ml/kg body weight, by gavage) on the abdominal writhing response induced by intraperitoneal administration of acetic acid (0.8%, 10 ml/kg body weight) and on the tail immersion test was investigated in mice. Control animals received castor oil (10 ml/kg body weight) or saline (0.9% NaCl, 10 ml/kg body weight). CrEL reduced nociception in a dose-dependent manner in both tests. At 10.6 g/kg, CrEL caused antinociception similar to that induced by dipyrone (300 mg/kg, by gavage) in the abdominal writhing test, and antinociception similar to that induced by morphine (20 mg/kg, by gavage) in the tail immersion test. The effect of castor oil was similar to that of saline in both assays. These data indicate that the appropriate controls should be used when evaluating the effects of potential antinociceptive agents dissolved in CrEL.

Comparison of the homeostasis model assessment and quantitative insulin sensitivity check index with data from forearm metabolic studies for the in vivo assessment of insulin sensitivity

The present study was designed to compare the homeostasis model assessment (HOMA) and quantitative insulin sensitivity check index (QUICKI) with data from forearm metabolic studies of healthy individuals and of subjects in various pathological states. Fifty-five healthy individuals and 112 patients in various pathological states, including type 2 diabetes mellitus, essential hypertension and others, were studied after an overnight fast and for 3 h after ingestion of 75 g of glucose, by HOMA, QUICKI and the forearm technique to estimate muscle uptake of glucose combined with indirect calorimetry (oxidative and non-oxidative glucose metabolism). The patients showed increased HOMA (1.88 ± 0.14 vs 1.13 ± 0.10 pmol/l x mmol/l) and insulin/glucose (I/G) index (1.058.9 ± 340.9 vs 518.6 ± 70.7 pmol/l x (mg/100 ml forearm)-1), and decreased QUICKI (0.36 ± 0.004 vs 0.39 ± 0.006 (µU/ml + mg/dl)-1) compared with the healthy individuals. Analysis of the data for the group as a whole (patients and healthy individuals) showed that the estimate of insulin resistance by HOMA was correlated with data obtained in the forearm metabolic studies (glucose uptake: r = -0.16, P = 0.04; non-oxidative glucose metabolism: r = -0.20. P = 0.01, and I/G index: r = 0.17, P = 0.03). The comparison of QUICKI with data of the forearm metabolic studies showed significant correlation between QUICKI and non-oxidative glucose metabolism (r = 0.17, P = 0.03) or I/G index (r = -0.37, P < 0.0001). The HOMA and QUICKI are good estimates of insulin sensitivity as data derived from forearm metabolic studies involving direct measurements of insulin action on muscle glucose metabolism.