The application of uncertainty evaluating software for the utilisation of machine tool systems for final inspection

As machine tools continue to become increasingly repeatable and accurate, high-precision manufacturers may be tempted to consider how they might utilise machine tools as measurement systems. In this paper, we have explored this paradigm by attempting to repurpose state-of-the-art coordinate measuring machine Uncertainty Evaluating Software (UES) for a machine tool application. We performed live measurements on all the systems in question. Our findings have highlighted some gaps with UES when applied to machine tools, and we have attempted to identify the sources of variation which have led to discrepancies. Implications of this research include requirements to evolve the algorithms within the UES if it is to be adapted for on-machine measurement, improve the robustness of the input parameters, and most importantly, clarify expectations.

Multiresponse Robust Engineering: Case with Errors in Factor Levels

2000 Mathematics Subject Classification: 62J05, 62J10, 62F35, 62H12, 62P30.

CP-036 evaluation of outpatient clinic letters for medication errors

Background - It is well recognised that errors are more likely to occur during transitions of care, especially medicines errors. Clinic letters are used as a communication tool during a transition from hospital (outpatient clinics) to primary care (general practitioners). Little is known about medicines errors in clinic letters, as previous studies in this area have focused on medicines errors in inpatient or outpatient prescriptions. Published studies concerning clinic letters largely focus on perceptions of patients or general practitioners in respect to overall quality. Purpose - To investigate medicines errors contained in outpatient clinic letters generated by prescribers within the Neurology Department of a specialist paediatric hospital in the UK.Materials and methods - Single site, retrospective, cross-sectional review of 100 clinic letters generated during March–July 2013 in response to an outpatient consultation. Clinic letters were conveniently selected from the most recent visit of each patient. An evaluation tool with a 10-point scale, where 10 was no error and 0 was significant error, was developed and refined throughout the study to facilitate identification and characterisation of medicines errors. The tool was tested for a relationship between scores and number of medicines errors using a regression analysis.Results - Of 315 items related to neurology mentioned within the letters, 212 items were associated with 602 errors. Common missing information was allergy (97%, n = 97), formulation (60.3%, n = 190), strength/concentration (59%, n = 186) and weight (53%, n = 53). Ninety-nine letters were associated with at least one error. Scores were in range of 4–10 with 42% of letters scored as 7. Statistically significant relationships were observed between scores and number of medicines errors (R2 = 0.4168, p < 0.05) as well as between number of medicines and number of drug-related errors (R2 = 0.9719, p < 0.05). Conclusions - Nearly all clinic letters were associated with medicines errors. The 10-point evaluation tool may be a useful device to categorise clinic letter errors.

Első- és másodfajú etikai kudarcok (Type I and type II ethical errors)

A cikkben a szerző a piac és a kormányzat kudarcaiból kiindulva azonosítja a közjó elérését célzó harmadik rendszer, az etikai felelősség kudarcait. Statisztikai analógiát használva elsőfajú kudarcként azonosítja, mikor az etikát nem veszik figyelembe, pedig szükség van rá. Ugyanakkor másodfajú kudarcként kezeli az etika profitnövelést célzó használatát, mely megtéveszti az érintetteteket, így még szélesebb utat enged az opportunista üzleti tevékenységnek. Meglátása szerint a három rendszer egymást nemcsak kiegészíti, de kölcsönösen korrigálja is. Ez az elsőfajú kudarc esetében általánosabb, a másodfajú kudarc megoldásához azonban a gazdasági élet alapvetéseinek átfogalmazására, az önérdek és az egydimenziós teljesítményértékelés helyett egy új, holisztikusabb szemléletű közgazdaságra van szükség. _______ In the article the author identifies the errors of ethical responsibility. That is the third system to attain common good, but have similar failures like the other two: the hands of the market and the government. Using statistical analogy the author identifies Type I error when ethics are not considered but it should be (null hypothesis is rejected however it’s true). She treats the usage of ethics to extend profit as Type II error. This misleads the stakeholders and makes room for opportunistic behaviour in business (null hypothesis is accepted in turn it’s false). In her opinion the three systems: the hand of the market, the government and the ethical management not only amend but interdependently correct each other. In the case of Type I error it is more general. Nevertheless to solve the Type II error we have to redefine the core principles of business. We need a more holistic approach in economics instead of self-interest and one-dimensional interpretation of value.

Hungary and the eurozone crisis: a comedy of errors?

The spill-over of the global fi nancial crisis has uncovered the weaknesses in the governance of the EMU. As one of the most open economies in Europe, Hungary has suff ered from the ups and downs of the global and European crisis and its mismanagement. Domestic policy blunders have complicated the situation. This paper examines how Hungary has withstood the ups and downs of the eurozone crisis. It also addresses the questions of whether the country has converged with or diverged from the EMU membership, whether joining the EMU is still a good idea for Hungary, and whether the measures to ward off the crisis have actually helped to face the challenge of growth.

A method for enhancing digital information displayed to computer users with visual refractive errors via spatial and spectral processing

This research pursued the conceptualization, implementation, and verification of a system that enhances digital information displayed on an LCD panel to users with visual refractive errors. The target user groups for this system are individuals who have moderate to severe visual aberrations for which conventional means of compensation, such as glasses or contact lenses, does not improve their vision. This research is based on a priori knowledge of the user's visual aberration, as measured by a wavefront analyzer. With this information it is possible to generate images that, when displayed to this user, will counteract his/her visual aberration. The method described in this dissertation advances the development of techniques for providing such compensation by integrating spatial information in the image as a means to eliminate some of the shortcomings inherent in using display devices such as monitors or LCD panels. Additionally, physiological considerations are discussed and integrated into the method for providing said compensation. In order to provide a realistic sense of the performance of the methods described, they were tested by mathematical simulation in software, as well as by using a single-lens high resolution CCD camera that models an aberrated eye, and finally with human subjects having various forms of visual aberrations. Experiments were conducted on these systems and the data collected from these experiments was evaluated using statistical analysis. The experimental results revealed that the pre-compensation method resulted in a statistically significant improvement in vision for all of the systems. Although significant, the improvement was not as large as expected for the human subject tests. Further analysis suggest that even under the controlled conditions employed for testing with human subjects, the characterization of the eye may be changing. This would require real-time monitoring of relevant variables (e.g. pupil diameter) and continuous adjustment in the pre-compensation process to yield maximum viewing enhancement.

Inspection of parts with complex geometry and welds with structural health monitoring techniques

Structural Health Monitoring (SHM) systems were developed to evaluate the integrity of a system during operation, and to quickly identify the maintenance problems. They will be used in future aerospace vehicles to improve safety, reduce cost and minimize the maintenance time of a system. Many SHM systems were already developed to evaluate the integrity of plates and used in marine structures. Their implementation in manufacturing processes is still expected. The application of SHM methods for complex geometries and welds are two important challenges in this area of research. This research work started by studying the characteristics of piezoelectric actuators, and a small energy harvester was designed. The output voltages at different frequencies of vibration were acquired to determine the nonlinear characteristics of the piezoelectric stripe actuators. The frequency response was evaluated experimentally. AA battery size energy harvesting devices were developed by using these actuators. When the round and square cross section devices were excited at 50 Hz frequency, they generated 16 V and 25 V respectively. The Surface Response to Excitation (SuRE) and Lamb wave methods were used to estimate the condition of parts with complex geometries. Cutting tools and welded plates were considered. Both approaches used piezoelectric elements that were attached to the surfaces of considered parts. The variation of the magnitude of the frequency response was evaluated when the SuRE method was used. The sum of the square of the differences was calculated. The envelope of the received signal was used for the analysis of wave propagation. Bi-orthogonal wavelet (Binlet) analysis was also used for the evaluation of the data obtained during Lamb wave technique. Both the Lamb wave and SuRE approaches along with the three methods for data analysis worked effectively to detect increasing tool wear. Similarly, they detected defects on the plate, on the weld, and on a separate plate without any sensor as long as it was welded to the test plate.

Test of a smock system on CPR primary emergency measures and medical errors during simulated emergencies

Rates of survival of victims of sudden cardiac arrest (SCA) using cardio pulmonary resuscitation (CPR) have shown little improvement over the past three decades. Since registered nurses (RNs) comprise the largest group of healthcare providers in U.S. hospitals, it is essential that they are competent in performing the four primary measures (compression, ventilation, medication administration, and defibrillation) of CPR in order to improve survival rates of SCA patients. The purpose of this experimental study was to test a color-coded SMOCK system on: 1) time to implement emergency patient care measures 2) technical skills performance 3) number of medical errors, and 4) team performance during simulated CPR exercises. The study sample was 260 RNs (M 40 years, SD=11.6) with work experience as an RN (M 7.25 years, SD=9.42).Nurses were allocated to a control or intervention arm consisting of 20 groups of 5-8 RNs per arm for a total of 130 RNs in each arm. Nurses in each study arm were given clinical scenarios requiring emergency CPR. Nurses in the intervention group wore different color labeled aprons (smocks) indicating their role assignment (medications, ventilation, compression, defibrillation, etc) on the code team during CPR. Findings indicated that the intervention using color-labeled smocks for pre-assigned roles had a significant effect on the time nurses started compressions (t=3.03, p=0.005), ventilations (t=2.86, p=0.004) and defibrillations (t=2.00, p=.05) when compared to the controls using the standard of care. In performing technical skills, nurses in the intervention groups performed compressions and ventilations significantly better than those in the control groups. The control groups made significantly (t=-2.61, p=0.013) more total errors (7.55 SD 1.54) than the intervention group (5.60, SD 1.90). There were no significant differences in team performance measures between the groups. Study findings indicate use of colored labeled smocks during CPR emergencies resulted in: shorter times to start emergency CPR; reduced errors; more technical skills completed successfully; and no differences in team performance.

A method for enhancing digital information displayed to computer users with visual refractive errors via spatial and spectral processing

This research pursued the conceptualization, implementation, and verification of a system that enhances digital information displayed on an LCD panel to users with visual refractive errors. The target user groups for this system are individuals who have moderate to severe visual aberrations for which conventional means of compensation, such as glasses or contact lenses, does not improve their vision. This research is based on a priori knowledge of the user's visual aberration, as measured by a wavefront analyzer. With this information it is possible to generate images that, when displayed to this user, will counteract his/her visual aberration. The method described in this dissertation advances the development of techniques for providing such compensation by integrating spatial information in the image as a means to eliminate some of the shortcomings inherent in using display devices such as monitors or LCD panels. Additionally, physiological considerations are discussed and integrated into the method for providing said compensation. In order to provide a realistic sense of the performance of the methods described, they were tested by mathematical simulation in software, as well as by using a single-lens high resolution CCD camera that models an aberrated eye, and finally with human subjects having various forms of visual aberrations. Experiments were conducted on these systems and the data collected from these experiments was evaluated using statistical analysis. The experimental results revealed that the pre-compensation method resulted in a statistically significant improvement in vision for all of the systems. Although significant, the improvement was not as large as expected for the human subject tests. Further analysis suggest that even under the controlled conditions employed for testing with human subjects, the characterization of the eye may be changing. This would require real-time monitoring of relevant variables (e.g. pupil diameter) and continuous adjustment in the pre-compensation process to yield maximum viewing enhancement.

Last Interglacial synthesis of high-latitude temperature: temperature anomalies and associated errors for 4 time slices

The Last Interglacial (LIG, 129-116 thousand of years BP, ka) represents a test bed for climate model feedbacks in warmer-than-present high latitude regions. However, mainly because aligning different palaeoclimatic archives and from different parts of the world is not trivial, a spatio-temporal picture of LIG temperature changes is difficult to obtain. Here, we have selected 47 polar ice core and sub-polar marine sediment records and developed a strategy to align them onto the recent AICC2012 ice core chronology. We provide the first compilation of high-latitude temperature changes across the LIG associated with a coherent temporal framework built between ice core and marine sediment records. Our new data synthesis highlights non-synchronous maximum temperature changes between the two hemispheres with the Southern Ocean and Antarctica records showing an early warming compared to North Atlantic records. We also observe warmer than present-day conditions that occur for a longer time period in southern high latitudes than in northern high latitudes. Finally, the amplitude of temperature changes at high northern latitudes is larger compared to high southern latitude temperature changes recorded at the onset and the demise of the LIG. We have also compiled four data-based time slices with temperature anomalies (compared to present-day conditions) at 115 ka, 120 ka, 125 ka and 130 ka and quantitatively estimated temperature uncertainties that include relative dating errors. This provides an improved benchmark for performing more robust model-data comparison. The surface temperature simulated by two General Circulation Models (CCSM3 and HadCM3) for 130 ka and 125 ka is compared to the corresponding time slice data synthesis. This comparison shows that the models predict warmer than present conditions earlier than documented in the North Atlantic, while neither model is able to produce the reconstructed early Southern Ocean and Antarctic warming. Our results highlight the importance of producing a sequence of time slices rather than one single time slice averaging the LIG climate conditions.

Far field of binary phase gratings with errors in the height of the strips

Diffraction gratings are not always ideal but, due to the fabrication process, several errors can be produced. In this work we show that when the strips of a binary phase diffraction grating present certain randomness in their height, the intensity of the diffraction orders varies with respect to that obtained with a perfect grating. To show this, we perform an analysis of the mutual coherence function and then, the intensity distribution at the far field is obtained. In addition to the far field diffraction orders, a "halo" that surrounds the diffraction order is found, which is due to the randomness of the strips height.

Error tolerance of topological codes with independent bit-flip and measurement errors

Topological quantum error correction codes are currently among the most promising candidates for efficiently dealing with the decoherence effects inherently present in quantum devices. Numerically, their theoretical error threshold can be calculated by mapping the underlying quantum problem to a related classical statistical-mechanical spin system with quenched disorder. Here, we present results for the general fault-tolerant regime, where we consider both qubit and measurement errors. However, unlike in previous studies, here we vary the strength of the different error sources independently. Our results highlight peculiar differences between toric and color codes. This study complements previous results published in New J. Phys. 13, 083006 (2011).