Geochemistry of Miocene "blue tuff" samples

Distinctive, massive to stratified, pale blue volcaniclastics, initially referred to as the "blue tuff," were encountered at all four sites drilled during ODP Leg 127 in the Japan Sea. Detailed vertical sequence analysis, plagioclase chemistry, plagioclase 87Sr/86Sr isotopic composition, and 40Ar/39Ar age dating indicate that thick sequences of the blue tuff are not genetically related. Blue tuffs at Hole 794B were apparently deposited by density flows at ambient temperature. Deposition was penecontemporaneous with a large submarine phreatomagmatic eruption at 14.9 Ma in bathyal or deeper water depths. The blue tuffs at this location comprise mostly reworked hydroclastic glass shards and lesser amounts of plagioclase crystals. Pyrogenic plagioclase has an average An mole% of 18±3. Comparison of blue tuff plagioclase compositions with the composition of plagioclase from acoustic basement at Site 794 suggests that these rocks are not genetically related. As such, the extrapolation of sediment accumulation rate data in conjunction with this more precise age for the blue tuff corroborates previous minimum age estimates of 16.2 Ma for acoustic basement at Site 794. Blue tuffs at Hole 796B were probably deposited at ambient temperatures by downslope slumping and density flow of reworked pyrogenic debris. This debris includes abundant bubble wall glass shards and plagioclase crystals, with variable admixture of volcanic lithic and intrabasinal fragments. Pyrogenic fragments were produced by subaerial or shallow submarine, magmatic eruptions dated at 7.6 Ma. Blue tuffs contain a heterogeneous mixture of unrelated fragments including a mixed population of plagioclase crystals. The average An mole% of the predominant, probable comagmatic, plagioclase population is 30±4. The two sequences of blue tuff studied are distinct in age, mineral composition, and the eruptive origin of pyroclastic fragments. Preliminary 87Sr/86Sr isotopic compositions of plagioclase, however, indicates that blue tuffs at both locations are the product of typical, subduction-related island arc magmatism. Based on the results of this study, there is no justification for stratigraphic correlation of widespread, Miocene, blue to blue-gray bentonitic tuff and tuffaceous sandstones nor the interpretation that these strata are indicative of regional, explosive submarine volcanism genetically related to rifting and formation of the Japan Sea. Rather, these reworked pyroclastic strata of intermediate composition were deposited over a protracted 6-8 m.y. period in association with widespread, subduction-related submarine to subaerial volcanism in the Japan Sea backarc basin.

Percentage of cultured cell-populations that stained positively and/or negatively for apoptotic markers cleaved caspase-3 and cleaved PARP, following DNA damage treatments induced by doxorubicin and TNF-alpha co-treatments

The present dataset contains the source data for Figure 2B of Tentner et al. (2012). The data shows the percentage of cultured cell-populations that stained positively and/or negatively for apoptotic markers cleaved caspase-3 and cleaved PARP, following DNA damage treatments induced by various doses of doxorubicin (0, 2 and 10 µmole/L) in the presence (100 ng/mL) or absence (0 ng/mL) of TNF-alpha co-treatment. For the six treatment conditions investigated, cell counts were made by flow cytometry at times 6, 12, 24, and 48 h following treatment; CULTURE DETAILS: U2OS cells were obtained from ATCC were maintained at 21% oxygen and 5% CO2 in Dulbecco's modified Eagle medium supplemented with 10% fetal bovine serum, penicillin, streptomycin, 2mM L-glutamine, and used within 15-20 passages. The first thymidine block was released by washing the plates three times with PBS, and incubating them in fresh thymidine-free media for 12 h. A second thymidine block was then performed by re-addition of thymidine to 2.5 mM followed by incubation for an additional 18 h. Media was aspirated, plates were washed 3 with PBS, and replaced with fresh media in the presence or absence of 10 mM aphidicolin; ANALYSIS DETAILS: See supplementary journal publication; RESULT: The authors of the supplementary journal publication conclude that TNF enhances dose-dependent cell death following doxorubicin-induced DNA damage with minimal affect on dose-dependent cell-cycle arrest.

Petrographic and chemical characteristics of abyssal tholeiites at DSDP Leg 63 Holes

Tholeiitic basalts were obtained from basaltic basement ranging in age from 6 to 17 m.y. on IPOD/DSDP Leg 63. The main rock types encountered at all sites but 473 are basaltic pillow lavas. Although many of these pillow basalts are highly or moderately altered, fresh glass is usually present. At Site 473, we recovered coarse-grained, massive basalts; no clearly defined pillowed forms were observed. Phenocrysts or microphenocrysts present in the Leg 63 basalts are Plagioclase and clinopyroxene at Site 469; olivine, Plagioclase, and spinel at Site 470; and olivine, Plagioclase, and clinopyroxene at Sites 472 and 473. Olivines of the basalts from Holes 470A and 472 (Fo85-88) are generally more magnesian than those of the Hole 473 basalts (Fo77-81). Also, plagioclases of Holes 470A and 472 basalts (An70-85) are generally more calcic than those of Holes 469 and 473 basalts (An66-72). Geochemical study of the Leg 63 basalts indicates that in all cases they are large-ion-lithophile (LIL) element depleted tholeiites like typical abyssal tholeiites. In particular, they are very similar in composition to those described from the eastern Pacific, although the degree of iron enrichment found in the Leg 63 basalts is not as extensive as in basalts from the Galapagos spreading center. Hence, the geochemical evidence of the Leg 63 basalts is compatible with their formation at a spreading center. Compositional variations in Leg 63 basalts from any single drill hole is small. Major and trace element data indicate that the samples from Holes 469 and 473 are more fractionated in chemical composition than are the samples from Holes 470A and 472; this compositional variation may be largely ascribed to differences in the extent of shallow-level fractional crystallization of similar parental magma. The Hole 472 samples, however, show a LIL element character distinct from the other Leg 63 samples.

Geochemistry of tetrapyrrole, tetraterpenoid, and perylene pigments in sediments from the Gulf of California

Results and discussion cover pigment analyses of 36 sediment samples recovered by Deep Sea Drilling Project Leg 64, and six samples from the Leg 64 site-survey cruise in the Guaymas Basin (Scripps Institution of Oceanography, Leg 3). Pigments investigated were tetrapyrroles, tetraterpenoids, and the PAH compound perylene. Traces of mixed nickel and copper ETIO-porphyrins were ubiquitous in all sediment samples, except for the very surface (i.e., <2 m sub-bottom), and their presence is taken as an indication of minor influxes of previously oxidized allochthonous (terrestrial) organic matter. Phorbides and chlorins isolated from Site 479 sediment samples (i.e., the oxygen-minimum locale, northeast of the Guaymas Basin) well represent the reductive diagenesis ("Treibs Scheme"; see Baker and Palmer, 1978; Treibs, 1936) of chlorophyll derivatives. Three forms of pheophytin-a, plus a variety of phorbides, were found to give rise to freebase porphyrins, nickel phylloerythrin, and nickel porphyrins, with increasing depth of burial (increasing temperature). Sediments from Sites 481, 10G, and 18G yielded chlorophyll derivatives characteristic of early oxidative alterations. Included among these pigments are allomerized pheophytin-a, purpurin-18, and chlorin-p6. The high thermal gradient imposed upon the late Quaternary sediments of Site 477 greatly accelerated chlorophyll diagenesis in the adjacent overlying sediments, that is, the production of large quantities of free-base desoxophylloerythroetioporphyrin (DPEP) occurred in a section (477-7-5) presently only 49.8 meters sub-bottom. Present depth and age of these sediments are such that only chlorins and phorbides would be expected. Carotenoid (i.e., tetraterpenoids) concentrations were found to decrease rapidly with increasing sub-bottom depth. Less deeply buried sediments (e.g., 0-30 m) yielded mixtures of carotenes and oxygen-substituted carotenoids. Oxygencontaining (oxy-, oxo-, epoxy-) carotenoids were found to be lost preferentially with increased depth of burial. Early carotenoid diagenesis is suggested as involving interacting reductions and dehydrations whereby dehydro-, didehydro-, and retro-carotenes are generated. Destruction of carotenoids as pigments may involve oxidative cleavage of the isoprenoid chain through epoxy intermediates, akin to changes in the senescent cells of plants. Perylene was found to be a common component of the extractable organic matter from all sediments investigated. The generation of alkyl perylenes was found to parallel increases in the existing thermal regime at all sites. Igneous sills and sill complexes within the sediment profile of Site 481 altered (i.e., scrambled) the otherwise straightforward thermally induced alkylation of perylene. The degree of perylene alkylation is proposed as an indicator of geothermal stress for non-contemporaneous marine sediments.

Carbonate fraction, magnesium and strontium concentration, oxygen and carbon isotopes at DSDP Hole 92-600C

Strontium, magnesium, oxygen, and carbon isotope profiles of the carbonate fraction of Hole 600C sediments support the lithologic and petrographic observations of extensive CaCO3 dissolution and recrystallization in the Pliocene basal section. Convective fluid flow through the sediments during the first 1 to 1.5 m.y. of the sedimentary history of these sediments may explain these observations.

Seawater carbonate chemistry in the future ocean, 2008

Future anthropogenic emissions of CO2 and the resulting ocean acidification may have severe consequences for marine calcifying organisms and ecosystems. Marine calcifiers depositing calcitic hard parts that contain significant concentrations of magnesium, i.e. Mg-calcite, and calcifying organisms living in high latitude and/or cold-water environments are at immediate risk to ocean acidification and decreasing seawater carbonate saturation because they are currently immersed in seawater that is just slightly supersaturated with respect to the carbonate phases they secrete. Under the present rate of CO2 emissions, model calculations show that high latitude ocean waters could reach undersaturation with respect to aragonite in just a few decades. Thus, before this happens these waters will be undersaturated with respect to Mg-calcite minerals of higher solubility than that of aragonite. Similarly, tropical surface seawater could become undersaturated with respect to Mg-calcite minerals containing ?12 mole percent (mol%) MgCO3 during this century. As a result of these changes in surface seawater chemistry and further penetration of anthropogenic CO2 into the ocean interior, we suggest that (1) the magnesium content of calcitic hard parts will decrease in many ocean environments, (2) the relative proportion of calcifiers depositing stable carbonate minerals, such as calcite and low Mg-calcite, will increase and (3) the average magnesium content of carbonate sediments will decrease. Furthermore, the highest latitude and deepest depth at which cold-water corals and other calcifiers currently exist will move towards lower latitudes and shallower depth, respectively. These changes suggest that anthropogenic emissions of CO2 may be currently pushing the oceans towards an episode characteristic of a 'calcite sea.'

Isotopic survey of diagenetic carbonates, at DSDP Leg 63 Holes

Authigenic carbonates, principally calcium-rich dolomites, with extremely variable isotopic compositions were recovered in organic-rich marine sediments during Leg 63 drilling off southern California and Baja California. These carbonates occur as thin layers in fine-grained, diatomaceous sediments and siliceous rocks, mostly deposited during the Neogene. A combination of textural, geochemical, and isotopic evidence indicates these dolomites formed as cements and precipitates in shallow subsurface zones of high alkalinity spawned by abundant CO2 and methane production during progressive microbial decay of organic matter. Depths and approximate temperatures of formation estimated from oxygen isotopes are 87 to 658 meters and 10°C to 50°C, respectively. Within any sedimentary section, dolomites may form simultaneously at several depths or at different times within the same interval. Highly variable carbon isotopes (-30 to +16 per mil) reflect the isotopic reservoir in which the carbonates formed. Oxidation of organic matter through microbial reduction of sulfate at shallow depths favors light-carbon carbonates such as those at Sites 468 and 471; heavy-carbon carbonates at Site 467 most likely formed below this zone where HC**12O3**- is preferentially removed by reduction of CO2 to methane during methanogenesis. An important controlling factor is the sedimentation rate, which dictates both the preservation of organic matter on the sea floor and depth distribution of subsurface zones of organic-matter decay.

Oxygen isotopes and hydrocarbon composition of gas hydrate and hydrate water from ODP Leg 165 sites

Ocean Drilling Program (ODP) Leg 164 recovered a number of large solid gas hydrate from Sites 994, 996, and 997 on the Blake Ridge. Sites 994 and 997 samples, either nodular or thick massive pieces, were subjected to laboratory analysis and measurements to determine the structure, molecular and isotopic composition, thermal conductivity, and equilibrium dissociation conditions. X-ray computed tomography (CT) imagery, X-ray diffraction, nuclear magnetic resonance (NMR), and Raman spectroscopy have revealed that the gas hydrates recovered from the Blake Ridge are nearly 100% methane gas hydrate of Structure I, cubic with a lattice constant of a = 11.95 ± 0.05 angström, and a molar ratio of water to gas (hydration number) of 6.2. The d18O of water is 2.67 per mil to 3.51 per mil SMOW, which is 3.5-4.0 heavier than the ambient interstitial waters. The d13C and dD of methane are -66 per mil to -70 per mil and -201 per mil to -206 per mil, respectively, suggesting that the methane was generated through bacterial CO2 reduction. Thermal conductivity values of the Blake Ridge hydrates range from 0.3 to 0.5 W/(m K). Equilibrium dissociation experiments indicate that the three-phase equilibrium for the specimen is 3.27 MPa at 274.7 K. This is almost identical to that of synthetic pure methane hydrate in freshwater.

Petrographic and chemical characteristics of diabases at DSDP Holes 63-469 and 63-471

Diabasic rocks were recovered at Sites 469 and 471 on IPOD/DSDP Leg 63. The diabasic rocks are composed mainly of Plagioclase, clinopyroxene, and low-temperature alteration products. In addition to these phases, a considerable amount of primary biotite and lesser colorless amphibole are observed in some of the Site 471 diabases. Major and trace element data suggest that these rocks are tholeiitic; however, their highly altered nature obscures their petrologic affinity with the DSDP Leg 63 tholeiitic basalts and others from the nearby Pacific ocean floor. It is likely that the Site 469 and 471 diabasic rocks represent products of off-ridge intrusive activity.

Properties of seawater (partial pressure of carbon dioxide (pCO2)) from a ProOceanus CO2-Pro sensor mounted on the continuous surface water sampling system during the Tara Oceans expedition 2009-2013

The Tara Oceans Expedition (2009-2013) sampled the world oceans on board a 36 m long schooner, collecting environmental data and organisms from viruses to planktonic metazoans for later analyses using modern sequencing and state-of-the-art imaging technologies. Tara Oceans Data are particularly suited to study the genetic, morphological and functional diversity of plankton. The present data set provides continuous measurements of partial pressure of carbon dioxide (pCO2), using a ProOceanus CO2-Pro instrument mounted on the flowthrough system. This automatic sensor is fitted with an equilibrator made of gas permeable silicone membrane and an internal detection loop with a non-dispersive infrared detector of PPSystems SBA-4 CO2 analyzer. A zero-CO2 baseline is provided for the subsequent measurements circulating the internal gas through a CO2 absorption chamber containing soda lime or Ascarite. The frequency of this automatic zero point calibration was set to be 24 hours. All data recorded during zeroing processes were discarded with the 15-minute data after each calibration. The output of CO2-Pro is the mole fraction of CO2 in the measured water and the pCO2 is obtained using the measured total pressure of the internal wet gas. The fugacity of CO2 (fCO2) in the surface seawater, whose difference with the atmospheric CO2 fugacity is proportional to the air-sea CO2 fluxes, is obtained by correcting the pCO2 for non-ideal CO2 gas concentration according to Weiss (1974). The fCO2 computed using CO2-Pro measurements was corrected to the sea surface condition by considering the temperature effect on fCO2 (Takahashi et al., 1993). The surface seawater observations that were initially estimated with a 15 seconds frequency were averaged every 5-min cycle. The performance of CO2-Pro was adjusted by comparing the sensor outputs against the thermodynamic carbonate calculation of pCO2 using the carbonic system constants of Millero et al. (2006) from the determinations of total inorganic carbon (CT ) and total alkalinity (AT ) in discrete samples collected at sea surface. AT was determined using an automated open cell potentiometric titration (Haraldsson et al. 1997). CT was determined with an automated coulometric titration (Johnson et al. 1985; 1987), using the MIDSOMMA system (Mintrop, 2005). fCO2 data are flagged according to the WOCE guidelines following Pierrot et al. (2009) identifying recommended values and questionable measurements giving additional information about the reasons of the questionability.

Optimization of InGaAsN(Sb)/GaAs quantum dots for optical emission at 1.55 µm with low optical degradation

Low optical degradation in GaInAsN(Sb)/GaAs quantum dots (QDs) p–i–n structures emitting up to 1.55 μm is presented in this paper. We obtain emission at different energies by means of varying N content from 1 to 4%. The samples show a low photoluminescence (PL) intensity degradation of only 1 order of magnitude when they are compared with pure InGaAs QD structures, even for an emission wavelength as large as 1.55 μm. The optimization studies of these structures for emission at 1.55 μm are reported in this work. High surface density and homogeneity in the QD layers are achieved for 50% In content by rapid decrease in the growth temperature after the formation of the nanostructures. Besides, the effect of N and Sb incorporation in the redshift and PL intensity of the samples is studied by post-growth rapid thermal annealing treatments. As a general conclusion, we observe that the addition of Sb to QD with low N mole fraction is more efficient to reach 1.55 μm and high PL intensity than using high N incorporation in the QD. Also, the growth temperature is determined to be an important parameter to obtain good emission characteristics. Finally, we report room temperature PL emission of InGaAsN(Sb)/GaAs at 1.4 μm.

Flammability conditions for ultra-lean hydrogen premixed combustion based on flame-ball analyses

It has been reasoned that the structures of strongly cellular flames in very lean mixtures approach an array of flame balls, each burning as if it were isolated, thereby indicating a connection between the critical conditions required for existence of steady flame balls and those necessary for occurrence of self-sustained premixed combustion. This is the starting assumption of the present study, in which structures of near-limit steady sphericosym-metrical flame balls are investigated with the objective of providing analytic expressions for critical combustion conditions in ultra-lean hydrogen-oxygen mixtures diluted with N2 and water vapor. If attention were restricted to planar premixed flames, then the lean-limit mole fraction of H2 would be found to be roughly ten percent, more than twice the observed flammability limits, thereby emphasizing the relevance of the flame-ball phenomena. Numerical integrations using detailed models for chemistry and radiation show that a onestep chemical-kinetic reduced mechanism based on steady-state assumptions for all chemical intermediates, together with a simple, optically thin approximation for water-vapor radiation, can be used to compute near-limit fuel-lean flame balls with excellent accuracy. The previously developed one-step reaction rate includes a crossover temperature that determines in the first approximation a chemical-kinetic lean limit below which combustión cannot occur, with critical conditions achieved when the diffusion-controlled radiation-free peak temperature, computed with account taken of hydrogen Soret diffusion, is equal to the crossover temperature. First-order corrections are found by activation-energy asymptotics in a solution that involves a near-field radiation-free zone surrounding a spherical flame sheet, together with a far-field radiation-conduction balance for the temperature profile. Different scalings are found depending on whether or not the surrounding atmosphere contains wáter vapor, leading to different analytic expressions for the critical conditions for flame-ball existence, which give results in very good agreement with those obtained by detailed numerical computations.

Catàlec bibliogràfic de la prensa valenciana [Texto impreso] : escrita en nostra llengua y publicada en Valencia _ : 1586-1927

Índices

AVALIAÇÃO CEFALOMÉTRICA DAS ALTERAÇÕES SAGITAIS E VERTICAIS EM PACIENTES SUBMETIDOS À EXPANSÃO RÁPIDA DA MAXILA ASSISTIDA CIRURGICAMENTE

O presente estudo teve como objetivos avaliar cefalometricamente as alterações esqueléticas, dentárias e de tecidos moles, no sentido sagital e vertical em pacientes submetidos à expansão rápida da maxila assistida cirurgicamente. A amostra constituiu-se de 51 telerradiografias em norma lateral de 17 pacientes adultos, brasileiros, sendo 6 do sexo masculino e 11 do sexo feminino, com idade média de 24 anos e 1 mês e severa deficiência transversa da maxila. As telerradiografias foram obtidas no início do tratamento (T1), após o procedimento de ERMAC (T2), e após três meses de contenção com o próprio aparelho disjuntor (T3). A partir da análise e discussão dos resultados, observouse rotação da maxila e da mandíbula no sentido horário, havendo, como conseqüência, aumento da AFAI. Após 3 meses de contenção, houve recidiva considerando-se o aumento da AFAI. Houve extrusão dos incisivos superiores, na qual foi mantida no período de contenção. Durante a contenção, houve também retrusão dos incisivos superiores. Considerando-se aos molares superiores, houve extrusão após a expansão, acompanhada de uma recidiva com menor magnitude quando comparada ao efeito da expansão obtida. Não houve alteração dos tecidos moles quanto a espessura nasal e houve retrusão do lábio superior, lábio inferior e pogônio mole, acompanhando a parte esquelética. Houve aumento do ângulo nasolabial.

AVALIAÇÃO CEFALOMÉTRICA DAS ALTERAÇÕES SAGITAIS E VERTICAIS EM PACIENTES SUBMETIDOS À EXPANSÃO RÁPIDA DA MAXILA ASSISTIDA CIRURGICAMENTE

O presente estudo teve como objetivos avaliar cefalometricamente as alterações esqueléticas, dentárias e de tecidos moles, no sentido sagital e vertical em pacientes submetidos à expansão rápida da maxila assistida cirurgicamente. A amostra constituiu-se de 51 telerradiografias em norma lateral de 17 pacientes adultos, brasileiros, sendo 6 do sexo masculino e 11 do sexo feminino, com idade média de 24 anos e 1 mês e severa deficiência transversa da maxila. As telerradiografias foram obtidas no início do tratamento (T1), após o procedimento de ERMAC (T2), e após três meses de contenção com o próprio aparelho disjuntor (T3). A partir da análise e discussão dos resultados, observouse rotação da maxila e da mandíbula no sentido horário, havendo, como conseqüência, aumento da AFAI. Após 3 meses de contenção, houve recidiva considerando-se o aumento da AFAI. Houve extrusão dos incisivos superiores, na qual foi mantida no período de contenção. Durante a contenção, houve também retrusão dos incisivos superiores. Considerando-se aos molares superiores, houve extrusão após a expansão, acompanhada de uma recidiva com menor magnitude quando comparada ao efeito da expansão obtida. Não houve alteração dos tecidos moles quanto a espessura nasal e houve retrusão do lábio superior, lábio inferior e pogônio mole, acompanhando a parte esquelética. Houve aumento do ângulo nasolabial.