Medaka vasa is required for migration but not survival of primordial germ cells

Vasa is essential for germline development. However, the precise processes in which vasa involves vary considerably in diverse animal phyla. Here we show that vasa is required for primordial germ cell (PGC) migration in the medakafish. vasa knockdown by two morpholinos led to the PGC migration defect that was rescued by coinjection of Vasa RNA. Interestingly, Vasa knockdown did not alter the PGC number, identity, proliferation and motility even at ectopic locations. We established a cell culture system for tracing PGCs at the single cell level in vitro. In this culture system, control and morpholino-injected gastrulae produced the same PGC number and the same time course of PGC survival. importantly, vasa-depleted PGCs in culture had similar motility and locomotion to normal PGCs. Expression patterns of wt1a, sdf1b and cxcT4b in migratory tissues remained unchanged by Vasa knockdown. By chimera formation we show that PGCs from vasa-depleted blastulae failed to migrate properly in the normal environment, whereas control PGCs migrated normally in vasa-disrupted embryos. Furthermore, ectopic PGCs in vasa-depleted embryos also retained all the PGC properties examined. Taken together, medaka vasa is cell-autonomously required for PGC migration, but dispensable to PGC proliferation, motility, identity and survival. (C) 2009 Elsevier Ireland Ltd. All rights reserved.

Identification and characterization of a novel gene differentially expressed in zebrafish cross-subfamily cloned embryos

m Background: Cross-species nuclear transfer has been shown to be a potent approach to retain the genetic viability of a certain species near extinction. However, most embryos produced by cross-species nuclear transfer were compromised because that they were unable to develop to later stages. Gene expression analysis of cross-species cloned embryos will yield new insights into the regulatory mechanisms involved in cross-species nuclear transfer and embryonic development. Results: A novel gene, K31, was identified as an up-regulated gene in fish cross-subfamily cloned embryos using SSH approach and RACE method. K31 complete cDNA sequence is 1106 base pairs (bp) in length, with a 342 bp open reading frame (ORF) encoding a putative protein of 113 amino acids (aa). Comparative analysis revealed no homologous known gene in zebrafish and other species database. K31 protein contains a putative transmembrane helix and five putative phosphorylation sites but without a signal peptide. Expression pattern analysis by real time RT-PCR and whole-mount in situ hybridization (WISH) shows that it has the characteristics of constitutively expressed gene. Sub-cellular localization assay shows that K31 protein can not penetrate the nuclei. Interestingly, over-expression of K31 gene can cause lethality in the epithelioma papulosum cyprinid (EPC) cells in cell culture, which gave hint to the inefficient reprogramming events occurred in cloned embryos. Conclusion: Taken together, our findings indicated that K31 gene is a novel gene differentially expressed in fish cross-subfamily cloned embryos and over-expression of K31 gene can cause lethality of cultured fish cells. To our knowledge, this is the first report on the determination of novel genes involved in nucleo-cytoplasmic interaction of fish cross-subfamily cloned embryos.

A new fluorescent quantitative PCR-based in vitro neutralization assay for white spot syndrome virus

A fluorescent quantitative PCR (FQ-PCR) assay utilizing SYBR green I dye is described for quantitation of white spot syndrome virus (WSSV) particles isolated from infected crayfish, Cambarus clarkii. For this assay, a primer set was designed which amplifies, with high efficiency and specificity, a 129 bp target sequence within ORF167 of the WSSV genome. Conveniently, WSSV particles can be added into the FQ-PCR assay with a simple and convenient method to release its DNA. To establish the basis for an in vitro neutralization test, primary cultures of shrimp cells were challenged with WSSV that had been incubated with a polyclonal anti-WSSV serum or with control proteins. The number of WSSV particles released from the cells after these treatments were assayed by FQ-PCR. This test may serve as a method to screen monoclonal antibody pools or recombinant antibody pools for neutralizing activity prior to in vivo animal experiments. (c) 2007 Elsevier B.V. All rights reserved.

Characterization and application of monoclonal antibodies against turbot (Scophthalmus maximus) rhabdovirus

Five monoclonal antibodies (mAbs), 1G8, 1H9, 2D2, 2D3, and 2F5, against Scophthalmus maximus rhabdovirus (SMRV) were prepared. Characterization of the mAbs included indirect enzyme-linked immunosorbent assay, isotyping, viral inhibition assay, immunofluorescence staining of virus-infected cell cultures, and Western blot analysis. Isotyping revealed that 1G8 and 1H9 were of the IgG2b subclass and that the other three were IgM. 2D2, 2D3, and 2F5 partially inhibited SMRV infection in epithelioma. papulosum cyprinid (EPC) cell culture. Western blotting showed that all five mAbs could react with two SMRV proteins with molecular masses of approximately 30 kDa (P) and 26 kDa (M). These two proteins were localized within the cytoplasm of SMRV-infected EPC cells by immunofluorescence assay. Also, progressive foci of viral replication in cell cultures were monitored from 6 to 24 h, using mAb 2D3 as the primary antibody. A flow cytometry procedure was used to detect and quantify SMRV-infected (0.01 PFU/cell) EPC cells with mAb 2D3, and 10.8% of cells could be distinguished as infected 36 h postinfection. Moreover, mAb 2D3 was successfully applied for the detection of viral antigen in cryosections from flounder tissues by immunohistochemistry tests.

Cultured gill epithelial cells from tilapia (Oreochromis niloticus): a new in vitro assay for toxicants

A culture gill epithelium from seawater-adapted tilapia (Oreochromis niloticus) was developed for testing PAHs and dioxin-like contaminants in seawater. The epithelia consists two to three layers of epithelial cells incorporating both pavement cells and mitochondria-rich cells (MRCs). Polarity and a stable transepithelial resistance (TER) were maintained. and closely resembled those in fish gills in vivo. The tightness (integrity) of the epithelia remained unchanged upon exposure to benzo[a]pyrene (B[a]P). 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) and 3,3',4,4',5-pentachlorobiphenyl (PCB#126), while a concentration-dependent response of EROD activity in the epithelia was induced within 18-24 h when the apical side was exposed to these toxicants. The 24 h EC50 of EROD activity was 2.77 x 10(-7) M for PCB#126, 1.85 x 10(-7) M for B[a]P and 7.38 x 10(-10) M for TCDD. showing: that the preparation was not only sensitive to PAHs and dioxin-like compounds, but also able to produce inductive potency of AhR agonists that generally agreed with those derived from other established in vitro and in vivo systems. The results suggest, that the cultured gill epithelia from seawater-adapted tilapia may serve as a simple. rapid and cost-effective tool for assessing exposure and potential effects of toxicants in marine waters. (C) 2004 Elsevier B.V. All rights reserved.

A detection method for grass carp hemorrhagic virus (GCHV) based on a reverse transcription polymerase chain reaction

A rapid, sensitive and highly specific detection method for grass carp hemorrhagic virus (GCHV) based on a reverse transcription-polymerase chain reaction (RT-PCR) has been developed. Two pairs of PCR primers were synthesized according to the cloned cDNA sequences of the GCHV-861 strain. For each primer combination, only one specific major product was obtained when amplification was performed by using the genomic dsRNA of GCHV-861 strain. The lengths of their expected products were 320 and 223 bp, respectively. No products were obtained when nucleic acids other than GCHV-861 genomic RNA were used as RT-PCR templates. To assess the sensitivity of the method, dilutions of purified GCHV-861 dsRNA total genome (0.01 pg up to 1000 pg) were amplified and quantities of as little as 0.1 pg of purified dsRNA were detectable when the amplification product was analyzed by 1.5% agarose gel electrophoresis. This technique could detect GCHV-861 not only in infected cell culture fluids, but also in infected grass carp Ctenopharyngodon idellus and rare minnow Gobiocypris rarus with or without hemorrhagic symptoms. The results show that the RT-PCR amplification method is useful for the direct detection of GCHV.

绞股蓝离体培养中影响皂甙产量的几个因素研究

绞股蓝(Gynostemma pentaphyllum)系葫芦科绞股蓝属植物，药用价值广泛，但其野生资源日趋减少，绞股蓝主要药效成分为绞股 蓝皂甙。利用组织和细胞培养生产绞股蓝皂甙是合理开发利用和保护绞股蓝资源的可能途径之一。本文对绞股蓝组织培养中培养基 的蔗糖和激素的组成以及各种胁迫条件：渗透压、重金属离子、真菌诱导物等对皂苷产量的影响进行了初步研究。其中，渗透压、 重金属离子、真菌诱导物对绞股蓝愈伤组织皂甙产量的影响尚未见报道。1. 蔗糖对绞股蓝愈伤组织之生长影响显著，2,4-D对绞股 蓝愈伤组织皂甙含量、产量影响显著。增加蔗糖用量，减少2，4-D的用量可提高皂甙产量。2. Mn++ 用量的提高抑制绞股蓝愈伤组 织的生长，但可促进皂甙含量、产量的提高。Mn++用量提高至MS培养基的20-30倍时可使皂甙产量增加近一倍，而提高Cu++浓度的 作用不明显。3. 甘露醇用量增加抑制绞股蓝愈伤组织的生长，但可使皂甙含量、产量提高。0.680mol·l-1甘露醇可使皂甙产量提 高83%，而Nacl较大抑制愈伤组织的生长并使皂甙产量降低。4. 米曲霉粗提物对绞股蓝愈伤组织生长先略微促进，然后抑制，而根 霉粗提物则使愈伤组织生长受抑制；两者对皂甙含量、产量的作用相似：在较低浓度范围内升高，然后下降。米曲霉粗提物可提高 产量一倍，根霉粗提物可提高42%。这些结果为高产细胞系的筛选和生长、生产培养条件的优化积累了资料。在综述部分，对植物 细胞培养中组织和器官分化、细胞结构变化、生化水平的变化与次生物合成和积累的关系作了讨论。Gynostemma pentaphyllum blongs to Gynostemma, Cucurbitaccae. It has a wide medical use, but its wild resource is threatened by people's excessive use. Its effective medical components are gypenosides. For reasonable use and protect its resource, it is a possible way to product gypenosides by plant tissue and cell culture. This paper has a primary study on the components of sucrose and hormones and a variety of stress conditions: osmostic pressure, heavy metal ion, fungal elicitors in the medium for the calli culture. The effects of osmostic pressure, heavy metal ion and fungal elicitors on the calli of Gynostemma pentaphyllum have not been reported. 1. Sucrose had a significant effect on the growth of the calli, 2,4 D had notable effects on the gypenosides content and production of the calli. Increased the concentration of sucrose and decreased the concentration of 2,4 D improved the production of gypenosides. 2. Increased the concentration of Mn++ inhibited the growth of the calli, but improved the content and production of gypenosides. The optimum concentration was 20-30 times as MS medium which improved the production 100%. Increased the concentration of Cu++ had not a notable effect. 3. Increased the concentration of mannitol inhibited the growth of the calli, but improved the content and production of gypenosides. The optimum concentration was 0.680mol·l-1 which improved the production 83%. Nacl apparently inhibited the growth of the calli and decreased the production of gypenosides. 4. The crude preparation of Aspergillus oryzae inhibited the growth of the calli that in low concentration. The crude praparation of Rhizopus formosensis inhibited the growth of the calli throughout. Their effects on the content and production of gypenosides are alike, but the former is higher than the latter. On the optimum concentration, each crude preparation improved the production 100% (Aspergillus oryzae), 42%(Rhizopus formosensis). These results has accumulated some informantion on the select of high yield cell strains and choose the best culture conditons for the growth and gypenosides product of the calli. In the review, it is discussed that the differentiation on tissue-organal, cellular and biochemical levels related to the synthesis and accumulation of secondary metabolites in plant culuture.

A new potential radiosensitizer- multi-walled carbon nanotubes modified by ammonium persulfate

Here we prepare carbon nanotubes modified with ammonium persulfate, very short carbon nanotubes with 50-100 nanometer length was obtained, and the higher P potential of 52 mV was detected, these supporting the successful modification. HeLa cells were irradiated with P rays via adding or absent above functionalized carbon nanotubes (f- WCNTs) into cell culture medium with different concentration and radiation dosage. Confocal microscopy images and fluorescence-labeled DNA detection verified the successfully pure multi-walled carbon nanotubes (p-WCNTs) and f-WCNTs penetrated into cells. Compared with pure radiation, by MTT test, f-WCNTs induced cell death markedly with about 8.7 times higher than former one under little dose of radiation; meanwhile, no obvious toxicity was observed both in p-WCNTs and f-WCNTs without of radiation exposure. We hypothesized that large amount of hydroxyl and carbonyl organs on the surface of very short f-WCNTs changed into free radicals result from radiations led cell damage. These implied that f-WCNTs could be regarded as a new radiosensitizer.

Composites of poly(lactide-co-glycolide) and the surface modified carbonated hydroxyapatite nanoparticles

To improve the mechanical properties of the composites of poly(lactide-co-glycolide) (PLGA, LA/GA = 80/20) and the carbonate hydroxyapatite (CHAP) particles, the rice-form or claviform CHAP particles with 30-40 nm in diameter and 100-200 nm in length were prepared by precipitation method. The uncalcined CHAP particles have a coarse surface with a lot of global protuberances, which could be in favor of the interaction of the matrix polymer to the CHAP particles. The nanocomposites of PLGA and surface grafted CHAP particles (g-CHAP) were prepared by solution mixing method. The structure and properties of the composites were subsequently investigated by the emission scanning electron microscopy, the tensile strength testing, and the cell culture. When the contents of g-CHAP were in the range of 2-15 wt %, the PLGA/g-CHAP nanocomposites exhibited an improved elongation at break and tensile strength. At the 2 wt % content of g-CHAP, the fracture strain was increased to 20%) from 4-5% for neat PLGA samples. Especially at g-CHAP content of 15 wt %, the tensile strength of PLGA/g-CHAP composite was about 20% higher than that of neat PLGA materials. The tensile moduli of composites were increased with the increasing of filler contents, so that the g-CHAP particles had both reinforcing and toughening effects on the PLGA composites. The results of biocompatibility test showed that the higher g-CHAP contents in PLGA composite facilitated the adhesion and proliferation properties of osteoblasts on the PLGA/g-CHAP composite film.

Two thymosin-repeated molecules with structural and functional diversity coexist in Chinese mitten crab Eriocheir sinensis

Recently, beta-thymosin-like proteins with multiple thymosin domains (defined as thymosin-repeated proteins) have been identified from invertebrate. In the present study, the cDNAs of two thymosin-repeated proteins (designated EsTRP1 and EsTRP2) were cloned from Chinese mitten crab by expressed sequence tags (EST) techniques. BLAST analysis presented three and two thymosin domains in EsTRP1 and EsTRP2, respectively, with the identities amongst the five domains varying from 47% to 100%. Both EsTRP1 and EsTRP2 shared high similarities with previously identified vertebrate beta-thynnosins and invertebrate thymosin-repeated proteins (TRPs) with the identities ranging from 43% to 78%, indicating that EsTRPs were new members of the beta-thymosin family. Real-time RT-PCR assay was adopted to determine the tissue distribution of EsTRPs and their temporal expression profile in hemocytes after pathogen stimulation and injury challenge. The expression of EsTRP1 transcript was predominantly detectable in the tissues of hemocytes, hepatopancreas and gonad with the highest expression in hemocytes, while the highest expression level of EsTRP2 was found in heart. EsTRP1 mRNA expression in hemocytes significantly increased at 3 and 48 h after Listonella anguillarum challenge, but there was no significant variation in EsTRP2 temporal expression profile. The injury challenge reduced the mRNA expression of EsTRPs, with the down-regulation of EsTRP2 expression occurred earlier than that of EsTRP1. The cDNA fragments encoding their mature peptides of EsTRP1 and EsTRP2 were recombined and expressed in Escherichia coli. The activities of recombinant proteins (rEsTRP1 and rEsTRP2) were examined by MTT (3-(4,5-dimethylthiazol-2-yl)-2, 5-diphenyltetrazoliumbromide) and lysoplate assay. rEsTRP2 could significantly accelerate the growth of human hepatocellular carcinoma cell line, but there was no significant effect of rEsTRP1 on the tumor cell proliferation. Both rEsTRP1 and rEsTRP2 did not possess the ability of killing Micrococcus luteus and L. anguillarum. The differences in the tissue distribution of mRNA transcripts, the response to pathogen stimulation and injury challenge, and the effect of recombinant proteins on human cell proliferation, indicated that there were functional diversity between the two structurally different molecules, EsTRP1 and EsTRP2. (C) 2009 Elsevier Ltd. All rights reserved.

Functional biosynthesis of an allophycocyan beta subunit in Escherichia coli

Allophycocyanin is a phycobiliprotein with various biological and pharmacological properties. An expression vector was constructed using CpeS as the bilin lyase for the allophycocyanin beta subunit, resulting in overexpression of a fluorescent allophycocyanin beta-subunit in Escherichia coli. A high-density cell culture was developed using a continuous feeding strategy. After 16 h of culture, the dry cell density reached 21.4 g 1(-1), the expression of the allophycocyanin beta-subunit was 0.86 g l(-1) broth, and the relative chromoprotein yield was 81.4%. The recombinant protein showed spectral features similar to native allophycocyanin, which provide an efficient methodology for large-scale production of this valuable fluorescent protein. (C) 2008, The Society for Biotechnology, Japan. All rights reserved.

Molecular cloning, characterization and expression analysis of a putative C-type lectin (Fclectin) gene in Chinese shrimp Fenneropenaeus chinensis

Lectin is regarded as a potential molecule involved in immune recognition and phagocytosis through opsonization in crustacean. Knowledge on lectin at molecular level would help us to understand its regulation mechanism in crustacean immune system. A novel C-type lectin gene (Fclectin) was cloned from hemocytes of Chinese shrimp Fenneropenaeus chinensis by 3' and 5' rapid amplification of cDNA ends (RACE) PCR. The full-length cDNA consists of 1482 bp with an 861 bp open reading frame, encoding 287 amino acids. The deduced amino acid sequence contains a putative signal peptide of 19 amino acids. It also contains two carbohydrate recognition domains/C-type lectin-like domains (CRD1 and CRD2), which share 78% identity with each other. CRD1 and CRD2 showed 34% and 30% identity with that of mannose-binding lectin from Japanese lamprey (Lethenteron japonicum), respectively. Both CRD1 and CRD2 of Fclectin have I I amino acids residues, which are relatively invariant in animals' C-type lectin CRDs. Five residues at Ca2+ binding site I are conserved in Fclectin. The potential Ca2+/carbohydrate-binding (site 2) motif QPD, E, NP (Gln-Pro-Asp, Glu, Asn-Pro) presented in the two CRDs of Fclectin may support its ability to bind galactose-type sugars. It could be deduced that Fclectin is a member of C-type lectin superfamily. Transcripts of Fclectin were found only in hemocytes by Northern blotting and RNA in situ hybridization. The variation of mRNA transcription level in hemocytes during artificial infection with bacteria and white spot syndrome virus (WSSV) was quantitated by capillary electrophoresis after RT-PCR. An exploration of mRNA expression variation after LPS stimulation was carried out in primarily cultured hemocytes in vitro. Expression profiles of Fclectin gene were greatly modified after bacteria, LPS or WSSV challenge. The above-stated data can provide us clues to understand the probable role of C-type lectin in innate immunity of shrimp and would be helpful to shrimp disease control. (c) 2006 Elsevier Ltd. All rights reserved.

Instability of anthocyanin accumulation in Vitis vinifera L. var. Gamay Freaux suspension cultures

The inherent instability of metabolite production in plant cell culture-based bioprocessing is a major problem hindering its commercialization. To understand the extent and causes of this instability, this study was aimed at understanding the variability of anthocyanin accumulation during long-term subcultures, as well as within subculture batches, in Vitis vinifera cell cultures. Therefore, four cell line suspensions of Vitis vinitera L. var. Gamay Freaux, A, B, C and D, originated from the same callus by cell-aggregate cloning, were established with starting anthocyanin contents of 2.73 +/- 0.15, 1.45 +/- 0.04, 0.77 +/- 0.024 and 0.27 +/- 0.04 CV (Color Value)/g-FCW (fresh cell weight), respectively. During weekly subculturing of 33 batches over 8 months, the anthocyanin biosynthetic capacity was gradually lost at various rates, for all four cell lines, regardless of the significant difference in the starting anthocyanin content. Contrary to this general trend, a significant fluctuation in the anthocyanin content was observed, but with an irregular cyclic pattern. The variabilities in the anthocyanin content between the subcultures for the 33 batches, as represented by the variation coefficient (VC), were 58, 57, 54, and 84% for V vinifera cell lines A, B, C and D, respectively. Within one subculture, the VCs from 12 replicate flasks for each of 12 independent subcultures were averaged, and found to be 9.7%, ranging from 4 to 17%. High- and low-producing cell lines, VV05 and VV06, with 1.8-fold differences in their basal anthocyanin contents, exhibited different inducibilities to L-phenylalanine feeding, methyl jasmonate and light irradiation. The low-producing cell line, showed greater potential in enhanced the anthocyanin production.

Investigation of micro-devices for neurobiological applications

The aim of this project is to integrate neuronal cell culture with commercial or in-house built micro-electrode arrays and MEMS devices. The resulting device is intended to support neuronal cell culture on its surface, expose specific portions of a neuronal population to different environments using microfluidic gradients and stimulate/record neuronal electrical activity using micro-electrode arrays. Additionally, through integration of chemical surface patterning, such device can be used to build neuronal cell networks of specific size, conformation and composition. The design of this device takes inspiration from the nervous system because its development and regeneration are heavily influenced by surface chemistry and fluidic gradients. Hence, this device is intended to be a step forward in neuroscience research because it utilizes similar concepts to those found in nature. The large part of this research revolved around solving technical issues associated with integration of biology, surface chemistry, electrophysiology and microfluidics. Commercially available microelectrode arrays (MEAs) are mechanically and chemically brittle making them unsuitable for certain surface modification and micro-fluidic integration techniques described in the literature. In order to successfully integrate all the aspects into one device, some techniques were heavily modified to ensure that their effects on MEA were minimal. In terms of experimental work, this thesis consists of 3 parts. The first part dealt with characterization and optimization of surface patterning and micro-fluidic perfusion. Through extensive image analysis, the optimal conditions required for micro-contact printing and micro-fluidic perfusion were determined. The second part used a number of optimized techniques and successfully applied these to culturing patterned neural cells on a range of substrates including: Pyrex, cyclo-olefin and SiN coated Pyrex. The second part also described culturing neurons on MEAs and recording electrophysiological activity. The third part of the thesis described integration of MEAs with patterned neuronal culture and microfluidic devices. Although integration of all methodologies proved difficult, a large amount of data relating to biocompatibility, neuronal patterning, electrophysiology and integration was collected. Original solutions were successfully applied to solve a number of issues relating to consistency of micro printing and microfluidic integration leading to successful integration of techniques and device components.

Micro and nanostructured impedance sensors for biological and biomedical applications

This thesis work covered the fabrication and characterisation of impedance sensors for biological applications aiming in particular to the cytotoxicity monitoring of cultured cells exposed to different kind of chemical compounds and drugs and to the identification of different types of biological tissue (fat, muscles, nerves) using a sensor fabricated on the tip of a commercially available needle during peripheral nerve block procedures. Gold impedance electrodes have been successfully fabricated for impedance measurement on cells cultured on the electrode surface which was modified with the fabrication of gold nanopillars. These nanostructures have a height of 60nm or 100nm and they have highly ordered layout as they are fabricated through the e-beam technique. The fabrication of the threedimensional structures on the interdigitated electrodes was supposed to improve the sensitivity of the ECIS (electric cell-substrate impedance sensing) measurement while monitoring the cytotoxicity effects of two different drugs (Antrodia Camphorata extract and Nicotine) on three different cell lines (HeLa, A549 and BALBc 3T3) cultured on the impedance devices and change the morphology of the cells growing on the nanostructured electrodes. The fabrication of the nanostructures was achieved combining techniques like UV lithography, metal lift-off, evaporation and e-beam lithography techniques. The electrodes were packaged using a pressure sensitive, medical grade adhesive double-sided tape. The electrodes were then characterised with the aid of AFM and SEM imaging which confirmed the success of the fabrication processes showing the nanopillars fabricated with the right layout and dimensions figures. The introduction of nanopillars on the impedance electrodes, however, did not improve much the sensitivity of the assay with the exception of tests carried out with Nicotine. HeLa and A549 cells appeared to grow in a different way on the two surfaces, while no differences where noticed on the BALBc 3T3 cells. Impedance measurements obtained with the dead cells on the negative control electrodes or the test electrodes with the drugs can be compared to those done on the electrodes containing just media in the tested volume (as no cells are attached and cover the electrode surface). The impedance figures recorded using these electrodes were between 1.5kΩ and 2.5 kΩ, while the figures recorded on confluent cell layers range between 4kΩ and 5.5kΩ with peaks of almost 7 kΩ if there was more than one layer of cells growing on each other. There was then a very clear separation between the values of living cell compared to the dead ones which was almost 2.5 - 3kΩ. In this way it was very easy to determine whether the drugs affected the cells normal life cycle on not. However, little or no differences were noticed in the impedance analysis carried out on the two different kinds of electrodes using cultured cells. An increase of sensitivity was noticed only in a couple of experiments carried out on A549 cells growing on the nanostructured electrodes and exposed to different concentration of a solution containing Nicotine. More experiments to achieve a higher number of statistical evidences will be needed to prove these findings with an absolute confidence. The smart needle project aimed to reduce the limitations of the Electrical Nerve Stimulation (ENS) and the Ultra Sound Guided peripheral nerve block techniques giving the clinicians an additional tool for performing correctly the peripheral nerve block. Bioimpedance, as measured at the needle tip, provides additional information on needle tip location, thereby facilitating detection of intraneural needle placement. Using the needle as a precision instrument and guidance tool may provide additional information as to needle tip location and enhance safety in regional anaesthesia. In the time analysis, with the frequency fixed at 10kHz and the samples kept at 12°C, the approximate range for muscle bioimpedance was 203 – 616 Ω, the approximate bioimpedance range for fat was 5.02 - 17.8 kΩ and the approximate range for connective tissue was 790 Ω – 1.55 kΩ. While when the samples were heated at 37°C and measured again at 10kHz, the approximate bioimpedance range for muscle was 100-175Ω. The approximate bioimpedance range of fat was 627 Ω - 3.2 kΩ and the range for connective tissue was 221-540Ω. In the experiments done on the fresh slaughtered lamb carcass, replicating a scenario close to the real application, the impedance values recorded for fat were around 17 kΩ, for muscle and lean tissue around 1.3 kΩ while the nervous structures had an impedance value of 2.9 kΩ. With the data collected during this research, it was possible to conclude that measurements of bioimpedance at the needle tip location can give valuable information to the clinicians performing a peripheral nerve block procedure as the separation (in terms of impedance figures) was very marked between the different type of tissues. It is then feasible to use an impedance electrode fabricated on the needle tip to differentiate several tissues from the nerve tissue. Currently, several different methods are being studied to fabricate an impedance electrode on the surface of a commercially available needle used for the peripheral nerve block procedure.