Atomic force microscopy assisted with electron and ion beam microscopy for the direct measurement of biostructures and DNA samples

Dissertation to obtain a Master degree in Biotechnology

Improvements on the KNN classifier

Dissertação para obtenção do Grau de Mestre em Engenharia Informática

Interactive acquisition of spatial information from images for multimedia applications

Dissertação para obtenção do Grau de Doutor em Informática

Things we see: Portuguese anthropology on material culture

Part of the objects that anthropologists can now find in Lisbon result from the existence of networks with rather diverse historical, social and cultural origins, linking Angola, Mozambique, Cape Verde, Guinea-Bissau, Brazil and Portugal, as well as the countries which have attracted all these countries’ diasporas. The publishing of papers by Portuguese and Brazilian anthropologists in this dossier dedicated to consumption might come to generate a productive collaboration between researchers from both countries, which for over five centuries have seen arriving from the other side of the Atlantic strange objects that, in turn, have taken the routes of the diasporas mentioned above, from luxurious and whimsical items as the indigenous leaders’ feathers and the carriages of the Portuguese royalty, to common and irreplaceable goods as the havaianas.

Video interaction using pen-based technology

Dissertação para obtenção do Grau de Doutor em Informática

Um antropólogo fazedor de objectos

Texto publicado nas versões portuguesa e inglesa do catálogo da exposição retrospectiva - série don't look back - da obra de Fernando Brízio, realizada no quadro da bienal de 2011 da experimentadesign.

The influence of off-screen landmarks on user orientation

Dissertation submitted in partial fulfillment of the requirements for the Degree of Master of Science in Geospatial Technologies.

Haptic robot-environment interaction for self-supervised learning in ground mobility

Dissertação para obtenção do Grau de Mestre em Engenharia Eletrotécnica e de Computadores

Amorphous silicon e 3D sensors applied to object detection

Nowadays, existing 3D scanning cameras and microscopes in the market use digital or discrete sensors, such as CCDs or CMOS for object detection applications. However, these combined systems are not fast enough for some application scenarios since they require large data processing resources and can be cumbersome. Thereby, there is a clear interest in exploring the possibilities and performances of analogue sensors such as arrays of position sensitive detectors with the final goal of integrating them in 3D scanning cameras or microscopes for object detection purposes. The work performed in this thesis deals with the implementation of prototype systems in order to explore the application of object detection using amorphous silicon position sensors of 32 and 128 lines which were produced in the clean room at CENIMAT-CEMOP. During the first phase of this work, the fabrication and the study of the static and dynamic specifications of the sensors as well as their conditioning in relation to the existing scientific and technological knowledge became a starting point. Subsequently, relevant data acquisition and suitable signal processing electronics were assembled. Various prototypes were developed for the 32 and 128 array PSD sensors. Appropriate optical solutions were integrated to work together with the constructed prototypes, allowing the required experiments to be carried out and allowing the achievement of the results presented in this thesis. All control, data acquisition and 3D rendering platform software was implemented for the existing systems. All these components were combined together to form several integrated systems for the 32 and 128 line PSD 3D sensors. The performance of the 32 PSD array sensor and system was evaluated for machine vision applications such as for example 3D object rendering as well as for microscopy applications such as for example micro object movement detection. Trials were also performed involving the 128 array PSD sensor systems. Sensor channel non-linearities of approximately 4 to 7% were obtained. Overall results obtained show the possibility of using a linear array of 32/128 1D line sensors based on the amorphous silicon technology to render 3D profiles of objects. The system and setup presented allows 3D rendering at high speeds and at high frame rates. The minimum detail or gap that can be detected by the sensor system is approximately 350 μm when using this current setup. It is also possible to render an object in 3D within a scanning angle range of 15º to 85º and identify its real height as a function of the scanning angle and the image displacement distance on the sensor. Simple and not so simple objects, such as a rubber and a plastic fork, can be rendered in 3D properly and accurately also at high resolution, using this sensor and system platform. The nip structure sensor system can detect primary and even derived colors of objects by a proper adjustment of the integration time of the system and by combining white, red, green and blue (RGB) light sources. A mean colorimetric error of 25.7 was obtained. It is also possible to detect the movement of micrometer objects using the 32 PSD sensor system. This kind of setup offers the possibility to detect if a micro object is moving, what are its dimensions and what is its position in two dimensions, even at high speeds. Results show a non-linearity of about 3% and a spatial resolution of < 2µm.

Heritages, Identities, and Policy in the Metropolitan Area of Lisbon

In a world that has moved away from narratives based on the idea of progress, the past has established itself as a place of reference: confirming to ourselves that what we were is indispensible for sustaining what we think we are. The recovery of the past is thus one of the most common symbolic instruments used in negotiating identities. The cultural practices that have recourse to representation mechanisms that call on the past in order to consider the present always end up translating themselves, insofar as they fragment, reorganize and interpret it in their transformation, or, to use a formula that has become unavoidable, in their “invention”. Patrimonialization is one such practice. It associates the notion of heritage – which is not a given fact, but rather a socially constructed classification, and therefore one that is constantly being negotiated – with specific objects that come to serve as cultural representations of the groups who consider themselves to be their rightful owners. In the Lisbon Metropolitan Area, as in other ethnographic contexts, patrimonialization encompasses things as diverse as landscapes, monuments, popular architecture, handicrafts, local feast days/processions/pilgrimages and people; all things that can, once transformed into material representations of the past, serve as arguments for the identity fictions of the people who inhabit them.

From Consciousness to Knowledge – The Explanatory Power of Revelation

Epistemology in philosophy of mind is a difficult endeavor. Those who believe that our phenomenal life is different from other domains suggest that self-knowledge about phenomenal properties is certain and therefore privileged. Usually, this so called privileged access is explained by the idea that we have direct access to our phenomenal life. This means, in contrast to perceptual knowledge, self-knowledge is non-inferential. It is widely believed that, this kind of directness involves two different senses: an epistemic sense and a metaphysical sense. Proponents of this view often claim that this is due to the fact that we are acquainted with our current experiences. The acquaintance thesis, therefore, is the backbone in justifying privileged access. Unfortunately the whole approach has a profound flaw. For the thesis to work, acquaintance has to be a genuine explanation. Since it is usually assumed that any knowledge relation between judgments and the corresponding objects are merely causal and contingent (e.g. in perception), the proponent of the privileged access view needs to show that acquaintance can do the job. In this thesis, however, I claim that the latter cannot be done. Based on considerations introduced by Levine, I conclude that this approach involves either the introduction of ontologically independent properties or a rather obscure knowledge relation. A proper explanation, however, cannot employ either of the two options. The acquaintance thesis is, therefore, bound to fail. Since the privileged access intuition seems to be vital to epistemology within the philosophy of mind, I will explore alternative justifications. After discussing a number of options, I will focus on the so called revelation thesis. This approach states that by simply having an experience with phenomenal properties, one is in the position to know the essence of those phenomenal properties. I will argue that, after finding a solution for the controversial essence claim, this thesis is a successful replacement explanation which maintains all the virtues of the acquaintance account without necessarily introducing ontologically independent properties or an obscure knowledge relation. The overall solution consists in qualifying the essence claim in the relevant sense, leaving us with an appropriate ontology for phenomenal properties. On the one hand, this avoids employing mysterious independent properties, since this ontological view is physicalist in nature. On the other hand, this approach has the right kind of structure to explain privileged self-knowledge of our phenomenal life. My final conclusion consists in the claim that the privileged access intuition is in fact veridical. It cannot, however, be justified by the popular acquaintance approach, but rather, is explainable by the controversial revelation thesis.

Cellulose nanorods in liquid crystalline elastomers for improved actuators

Nanotechnology plays a central role in ‘tailoring’ materials’ properties and thus improving its performances for a wide range of applications. Coupling nature nano-objects with nanotechnology results in materials with enhanced functionalities. The main objective of this master thesis was the synthesis of nanocrystalline cellulose (NCCs) and its further incorporation in a cellulosic matrix, in order to produce a stimuli-responsive material to moisture. The induced behaviour (bending/unbending) of the samples was deeply investigated, in order to determine relationships between structure/properties. Using microcrystalline cellulose as a starting material, acid hydrolysis was performed and the NCC was obtained. Anisotropic aqueous solutions of HPC and NCC were prepared and films with thicknesses ranging from 22μm to 61μm were achieved, by using a shear casting technique. Microscopic and spectroscopic techniques as well as mechanical and rheological essays were used to characterize the transparent and flexible films produced. Upon the application of a stimulus (moisture), the bending/unbending response times were measured. The use of NCC allowed obtaining films with response times in the order of 6 seconds for the bending and 5 seconds for the unbending, improving the results previously reported. These promising results open new horizons for building up improved soft steam engines.

Fisioterapia e ganhos em Saúde numa Unidade de Cuidados Continuados

RESUMO: Atualmente, toda a envolvência do envelhecimento, desencadeada por um aumento crescente do número de pessoas idosas, incapazes de satisfazer as exigências do autocuidado e de viver autonomamente na comunidade, torna relevante o papel da fisioterapia no suporte ao idoso. O objetivo geral deste trabalho é caracterizar a evolução do nível de independência nas atividades da vida diária (AVD’s), dos indivíduos que realizam fisioterapia numa unidade de cuidados continuados integrados (UCCI). Trata-se de uma abordagem quantitativa, observacional, longitudinal e descritiva. A população do estudo incide nos indivíduos admitidos na UCCI do Hospital do Mar (HM). Da presente população é retirada uma amostra por conveniência, num período de quatro meses, de acordo com critérios de inclusão e exclusão. Os instrumentos utilizados para a recolha de informação foram: um inquérito por questionário para o levantamento das características sócio-demográficas, de saúde e hábitos de vida; o Método de Avaliação Biopsicossocial (MAB - Classificação) para a avaliação do nível de independência nas AVD’s; e o Timed Up and Go (TUG) para a avaliação da mobilidade funcional. Os principais resultados mostraram, segundo o MAB - Classificação, diferenças significativas, entre os dois momentos de avaliação (antes da fisioterapia e no momento da alta da fisioterapia), resultando num maior nível de independência funcional nas AVD’s no momento da alta da fisioterapia. Em relação ao TUG, a média da duração do teste diminuiu no momento da alta da fisioterapia, em relação ao momento antes da fisioterapia, traduzindo-se num aumento da mobilidade funcional. Concluindo, conseguiu-se evidenciar que os indivíduos submetidos a tratamentos de fisioterapia numa UCCI, obtêm um nível de independência funcional mais elevada no momento da alta da fisioterapia, do que antes de serem objetos desta intervenção; o mesmo sucedendo, em relação à mobilidade funcional.---------------ABSTRACT: Currently, the issue aging, triggered by an increasing number of elderly people, unable to meet the demands of self-care and live independently in the community, makes relevant the role of physiotherapy in support to the elderly. The aim of this work is to characterize the evolution of the level of independence in activities of daily living (ADLs), of individuals who perform physiotherapy in long term care hospital. This is a quantitative, observational, longitudinal and descriptive approach.The population of the study focuses on individuals admitted in long-term care in Hospital do Mar. Of this population is withdrawn a convenience sample within a period of four months, according to the inclusion and exclusion criteria. The instruments used for collecting data were a questionnaire to survey the socio-demographic, health and lifestyle characteristics; Método de Avaliação Biopsicossocial (MAB - Classificação) to assess the level of independence in activities of daily living (ADLs); and the Timed Up and Go (TUG) to assess functional mobility. The main results showed, according to the MAB - Classificação, significant differences between the two time points (before physiotherapy and at discharge from physiotherapy), resulting in a higher level of functional independence in ADLs at discharge from physiotherapy. Regarding the TUG, the average duration of the test decreased at discharge from physiotherapy, relative to the time before physiotherapy, translating into an increase of functional mobility. In conclusion, we were able to show that individuals undergoing physiotherapy treatments in long-term care hospital, obtaining a higher level of functional independence at discharge from physiotherapy than before objects of this intervention; the same applies with respect to functional mobility.

Archaeometallurgical study of the Proto-historic collection of Moinhos de Golas (North Portugal): a forecast for technological changes?

This work presents the archaeometallurgical study of a group of metallic artefacts found in Moinhos de Golas site, Vila Real (North of Portugal), that can generically be attributed to Proto-history (1st millennium BC, Late Bronze Age and Iron Age). The collection is composed by 35 objects: weapons, ornaments and tools, and others of difficult classification, as rings, bars and one small thin bent sheet. Some of the objects can typologically be attributed to Late Bronze Age, others are of more difficult specific attribution. The archaeometallurgical study involved x-ray digital radiography, elemental analysis by micro-energy dispersive X-ray fluorescence spectrometry and scanning electron microscopy with energy dispersive spectroscopy, microstructural observations by optical microscopy and scanning electron microscopy. The radiographic images revealed structural heterogeneities frequently related with the degradation of some artefacts and the elemental analysis showed that the majority of the artefacts was produced in a binary bronze alloy (Cu-Sn) (73%), being others produced in copper (15%) and three artefacts in brass (Cu-Zn(-Sn-Pb)). Among each type of alloy there’s certain variability in the composition and in the type of inclusions. The microstructural observations revealed that the majority of the artefacts suffered cycles of thermo-mechanical processing after casting. The diversity of metals/alloys identified was a discovery of great interest, specifically due to the presence of brasses. Their presence can be interpreted as importations related to the circulation of exogenous products during the Proto-history and/or to the deposition of materials during different moments at the site, from the transition of Late Bronze Age/Early Iron Age (Orientalizing period) onwards, as during the Roman period.

Popular music exhibitions in Portugal: practices of representation from 2007 to 2013

This thesis focuses on the representation of Popular Music in museums by mapping, analyzing, and characterizing its practices in Portugal at the beginning of the 21st century. Now that museums' ability to shape public discourse is acknowledged, the examination of popular music's discourses in museums is of the utmost importance for Ethnomusicology and Popular Music Studies as well as for Museum Studies. The concept of 'heritage' is at the heart of this processes. The study was designed with the aim of moving the exhibiting of popular music in museums forward through a qualitative inquiry of case studies. Data collection involved surveying pop-rock music exhibitions as a qualitative sampling of popular music exhibitions in Portugal from 2007 to 2013. Two of these exhibitions were selected as case studies: No Tempo do Gira-Discos: Um Percurso pela Produção Fonográfica Portuguesa at the Museu da Música in Lisbon in 2007 (also Faculdade de Letras, 2009), and A Magia do Vinil, a Música que Mudou a Sociedade at the Oficina da Cultura in Almada in 2008 (and several other venues, from 2009 to 2013). Two specific domains were observed: popular music exhibitions as instances of museum practice and museum professionals. The first domain encompasses analyzing the types of objects selected for exhibition; the interactive museum practices fostered by the exhibitions; the concepts and narratives used to address popular music discursively, as well as the interpretative practices they allow. The second domain, focuses museum professionals and curators of popular music exhibitions as members of a group, namely their goals, motivations and perspectives. The theoretical frameworks adopted were drawn from the fields of ethnomusicology, popular music studies, and museum studies. The written materials of the exhibitions were subjected of methods of discourse analysis methods. Semi-structured interviews with curators and museum professional were also conducted and analysed. From the museum studies perspective, the study research suggests that the practice adopted by popular music museums largely matches that of conventional museums. From the ethnomusicological and popular music studies stand point, the two case studies reveal two distinct conceptual worlds: the first exhibition, curated by an academic and an independent researcher, points to a mental configuration where popular music is explained through a framework of genres supported by different musical practices. Moreover, it is industry actors such as decision makers and gatekeepers that govern popular music, which implies that the visitors' romantic conception of the musician is to some extent dismantled; the second exhibition, curated by a record collector and specialist, is based on a more conventional process of the everyday historical speech that encodes a mismatch between “good” and “bad music”. Data generated by a survey shows that only one curator, in fact that of my first case study, has an academic background. The backgrounds of all the others are in some way similar to the curator of the second case study. Therefore, I conclude that the second case study best conveys the current practice of exhibiting Popular Music in Portugal.