Direct Write Fabrication of Waveguides and Interconnects for Optical Printed Wiring Boards

Current copper based circuit technology is becoming a limiting factor in high speed data transfer applications as processors are improving at a faster rate than are developments to increase on board data transfer. One solution is to utilize optical waveguide technology to overcome these bandwidth and loss restrictions. The use of this technology virtually eliminates the heat and cross-talk loss seen in copper circuitry, while also operating at a higher bandwidth. Transitioning current fabrication techniques from small scale laboratory environments to large scale manufacturing presents significant challenges. Optical-to-electrical connections and out-of-plane coupling are significant hurdles in the advancement of optical interconnects. The main goals of this research are the development of direct write material deposition and patterning tools for the fabrication of waveguide systems on large substrates, and the development of out-of-plane coupler components compatible with standard fiber optic cabling. Combining these elements with standard printed circuit boards allows for the fabrication of fully functional optical-electrical-printed-wiring-boards (OEPWBs). A direct dispense tool was designed, assembled, and characterized for the repeatable dispensing of blanket waveguide layers over a range of thicknesses (25-225 µm), eliminating waste material and affording the ability to utilize large substrates. This tool was used to directly dispense multimode waveguide cores which required no UV definition or development. These cores had circular cross sections and were comparable in optical performance to lithographically fabricated square waveguides. Laser direct writing is a non-contact process that allows for the dynamic UV patterning of waveguide material on large substrates, eliminating the need for high resolution masks. A laser direct write tool was designed, assembled, and characterized for direct write patterning waveguides that were comparable in quality to those produced using standard lithographic practices (0.047 dB/cm loss for laser written waveguides compared to 0.043 dB/cm for lithographic waveguides). Straight waveguides, and waveguide turns were patterned at multimode and single mode sizes, and the process was characterized and documented. Support structures such as angled reflectors and vertical posts were produced, showing the versatility of the laser direct write tool. Commercially available components were implanted into the optical layer for out-of-plane routing of the optical signals. These devices featured spherical lenses on the input and output sides of a total internal reflection (TIR) mirror, as well as alignment pins compatible with standard MT design. Fully functional OEPWBs were fabricated featuring input and output out-of-plane optical signal routing with total optical losses not exceeding 10 dB. These prototypes survived thermal cycling (-40°C to 85°C) and humidity exposure (95±4% humidity), showing minimal degradation in optical performance. Operational failure occurred after environmental aging life testing at 110°C for 216 hours.

Effects of the Use of the Educreations Application in the Reading Comprehension of an Adolescent with Autism and Speech Delay

This paper is the final proposal that accompanies the poster presentation of the action research "Effects of the Use of the Educreations Application in the Reading Comprehension of an Adolescent with Autism and Speech Delay" in the 2015 South Florida Research Education Conference.

Multi-kilowatt peak power nanosecond Er-doped fiber laser

We report a two-stage diode-pumped Er-doped fiber amplifier operating at the wavelength of 1550 nm at the repetition rate of 10-100 kHz with an average output power of up to 10 W. The first stage comprising Er-doped fiber was core-pumped at the wavelength of 1480 nm, whereas the second stage comprising double-clad Er/Yb-doped fiber was clad-pumped at the wavelength of 975 nm. The estimated peak power for the 0.4-nm full-width at half-maximum laser emission at the wavelength of 1550 nm exceeded 4-kW level. The initial 100-ns seed diode laser pulse was compressed to 3.5 ns as a result of the 34-dB total amplification. The observed 30-fold efficient pulse compression reveals a promising new nonlinear optical technique for the generation of high power short pulses for applications in eye-safe ranging and micromachining.

Derecho de petición N° 1-0000028641 ¿El uso del correo electrónico es obligatorio o no para recibir notificaciones?

Servicios registrales

Revisión sistemática utilidad de asa y calcio con o sin vitamina d en la prevención de cáncer colorrectal y la recurrencia de pólipos adenomatosos en paciente con riesgo de padecer esta patología

Introducción: El cáncer colorrectal es una patología con alto impacto en la salud pública, debido a su prevalencia, incidencia, severidad, costo e impacto en la salud mental y física del individuo y la familia. Ensayos clínicos realizados en pacientes con antecedente de infarto al miocardio que consumían ácido acetil salicílico (asa), calcio con y sin vitamina D, mostraron asociación entre el consumo de estos medicamentos y disminución en la incidencia en cáncer colorrectal y pólipos adenomatosos. Objetivo: Evaluar la literatura sobre el uso de asa, calcio con y sin vitamina D con relación a su impacto en la prevención del cáncer colorrectal y pólipos adenomatosos. Métodos: Se realizó revisión sistemática buscando ensayos clínicos realizados en pacientes con factores de riesgo para cáncer colorrectal y pólipos adenomatosos que usaron asa, calcio con y sin vitamina D fueron incluidos. Resultados: se escogieron 105 para la revisión sistemática. Conclusiones: Es necesario desarrollar más estudios que lleven a evaluar el efecto protector de la aspirina, calcio y vitamina D. En los artículos revisados la aspirina a dosis de 81 a 325 mg día se correlaciona con reducción de riesgo de aparición de CRC aunque la dosis ideal, el tiempo de inicio y la duración de la ingesta continua no son claros. Hacen falta estudios que comparen poblaciones con ingesta de asa a diferentes dosis.

Dream Builder

Dream Builder es una aplicación que te ayudará de manera cotidiana a materializar tus metas financieras a través del ahorro. Todo al alcance de un "touch"

Knightly Masculinity, Court Games and Material Culture in Late Medieval Portugal: The case of Constable Afonso (c. 1480–1504)

This article explores the ways in which gender was used in order to transform an exiled and uneducated illegitimate child into a prince. Our study revolves around a member of the royal family, Afonso (c.1480–1504), who was brought up in hiding by peasants and who later, as a teenager, was reincorporated into the court. We argue that the keys to this process of rehabilitation were, on one hand, family politics centred around different configurations and on the other, his introduction into a court environment marked by the ideals of chivalry. Within this dynamic, material culture played a key role, because it gave the prince all the visual attributes of his new status, as well as allowing him the means to create a new self. We shall briefly introduce Afonso and his family context in order to give an insight into his life within changing political and dynastic contexts. Then, we will analyse the expression of manhood in the Portuguese court, using the spectacles at the court as a basis for observation, thus relating gender to material culture in a courtly environment.

Proyecto: educación en línea

This is a presentation of a proposal for authentic application of the basic criteria and elements to create projects related to on line education in Centers of Superior Education. It provides a guide in a useful summary format, which explains the main aspects in the creation of the project from the planning stage to the final stage supervision. It is supported by a range of specialists who were involved in the process including experts in knowledge, graphic design, system programmers, and organizational leaders.

Trofobiose: uma revolução no uso de agrotóxicos.

1989