Study of nucleon resonances in a chiral quark model via eta productions

In this report we investigate eta-meson productions oil the proton via electromagnetic and hadron probes in a chiral quark model approach. The observables, such as, differential cross section and beam asymmetry for the two productions are calculated and compared with the experiment. The five known resonances S-11(1535) S-11(1650); P-13(1720) D-13(1520), and F-15(1680) are found to be dominant in the reaction mech-anisms in both channels. Significant, contribution from a new S-11 resonances are deduced. For the so-called "missing resonances", no evidence is found within the investigated reactions. The partial wave amplitudes for pi(-)p -> eta n are also presented.

eta photoproduction on the proton in a chiral constituent quark approach via a one-gluon-exchange model

A formalism based on a chiral quark model (chi QM) approach complemented with a one-gluon-exchange model, to take into account the breakdown of the SU(6)circle times O(3) symmetry, is presented. The configuration mixing of wave functions for nucleon and resonances are derived. With few adjustable parameters, differential cross-section and polarized-beam asymmetry for the gamma p -> eta p process are calculated and successfully compared with the data in the center-of-mass energy range from threshold to 2 GeV. The known resonances S-11(1535), S-11(1650), P-13(1720), D-13(1520), and F-15(1680), as well as two new S-11 and D-15 resonances, are found to be dominant in the reaction mechanism. Moreover, connections among the scattering amplitudes of the chi QM approach and the helicity amplitudes, as well as decay widths of resonances, are established. Possible contributions from the so-called missing resonances are investigated and found to be negligible.

快重离子在聚苯乙烯中的辐照效应研究

本工作用兰州重离子加速器提供的2.1GeV的Kr离子分别在空气和真空条件下辐照了多层堆叠的聚苯乙烯薄膜样品，辐照剂量在5 * 10~(10)到3 * 10~(12)ions/cm~2之间，辐照温度在室温附近。辐照后对样品分别进行了傅立叶变换红外光谱和紫外可见光谱的测量，由此研究了快重离子辐照聚苯乙烯产生的物理和化学改性。实验结果表明，聚苯乙烯经Kr离子辐照后发生了降解，包括苯环在内的大部分官能团遭到破坏，相应特征峰的吸光度随辐照剂量和能损的增加而减小。与此同时，辐照还在1650-1750cm~(-1)之间和3300cm~(-1)处产生了新的吸收峰，其分别对应于C=O双键的分子振动和C≡C-H的C-H伸缩振动，表明辐照在聚苯乙烯中产生了炔基。实验发现产生炔基需要离子有足够高的电子能损值，在聚苯乙烯中该能损阈值约为1.0keV/nm。在材料经辐照发生降解的同时，样品的光吸收边界逐渐红移，并伴有透光率的下降。详细的测量显示，在紫外可见区材料吸光度的增加随剂量近似呈线性关系，随能损呈约二次方的指数关系。通过对2.1GeV的Kr离子和1.4GeV的Ar离子辐照结果的比较还发现，快重离子辐照产生的物理化学改性不仅与离子的能损有关，还与离子的速度有关。在同一能损条件下，速度越小，产生的效应就越大。文中用径向能量沉积密度和有效化学反应半径对上述结果进行分析讨论。

CO_2浓度升高对两种沈阳城市森林树种光合特性的影响

利用开顶式气室,研究了CO2浓度升高条件下城市森林主要树种油松(Pinus tabulaefomis)和银杏(Ginkgo biloba)主要光合特性的变化。结果表明,整个生长季,CO2浓度升高(700μmol.mol-1)条件下2树种叶片的净光合速率、可溶性糖、淀粉和可溶性蛋白含量均接近或高于相应对照(自然CO2浓度)值,但不同树种增加的幅度不同;而2树种的叶绿素含量和Chla/Chlb值对CO2浓度升高反应不一,表现为CO2浓度升高条件下油松的叶绿素含量较对照值高,Chla/Chlb值降低,银杏的叶绿素含量为前期升高,后期降低,Chla/Chlb值变化与之正好相反,说明城市森林组成树种对CO2浓度升高的响应具有复杂性。CO2浓度升高条件下,两树种均未发生光合适应现象。

黄土高原地区土壤可蚀性及其应用研究

通过回顾已有的成果 ,分析评价了我国土壤可蚀性研究的进展及存在的问题 ,提出我国土壤可蚀性研究中的标准小区定义。运用野外观测资料 ,研究计算了黄土高原地区土壤可蚀性指标值。结果表明 ,陕北和晋西北一带黄土可蚀性 K值变化于 0 .3～ 0 .7之间 ,并且有以陕西子洲、绥德一带为最大 ,以此为中心 ,向南、向北和向东都减少的变化趋势。

沈阳福陵油松年轮宽度年表的建立

该文以沈阳福陵的油松为样本建立了油松年轮宽度年表(标准化年表、差值年表和自回归年表).分析表明:年表与冬季(上年11—2月)和初春(4—5月)低温的关系密切,其中与上年11月、1月的低温显著相关;年表与1、2月的降水量显著相关,还与1、9月的水汽压显著相关;上年10月—上年11月9、月、5—6月份的相对湿度对油松的影响突出;蒸发量对油松生长起显著的负效应,其中5月最明显,但1、2月的蒸发量与油松当年的年轮宽度正相关.油松年表的窄轮和窄化突变佐证了公元1650年以来的35次主要的旱灾年.油松年轮宽度年表和过去太阳活动、地磁的活动均存在共同的准周期变化.

物候模式识别在生态动力预报中的应用

以物候资料和数值天气预报模式输出图为基础,应用模式识别和数理逻辑判断的自动化技术,阐述制作生态动力预报的原理、方法和步骤.生态动力预报技术使传统的物候学在气象学和自动化技术支持下,扩展应用到生态预报业务领域,使物候预报从单站预报阶段发展到区域预报阶段,同时促进了农业气象预报方法从定性、统计阶段向动力预报阶段发展.该方法在农作物播种、长势、灌溉与施肥、病虫害防治等方面具有广阔的应用前景.

站在新的历史起点上推进生态文明建设

<正>生态文明的提出是历史的必然人类历史是一部人与自然关系发展的历史,它经历了一个从被动适应到主动适应的过程。在原始社会,即渔猎文明时期,人类只是被动地适应自然,对自然界没有实质性破坏和威胁,并处处受自然界的束缚,形成了原始的文明意识,此间历时百万年。随着农业的诞生,特别是铁器生产工具的出现,人们从被动适应自然过渡到主动适应自然,并出现了农业文明,此间历时万余年。在这一时期,人们为了自身的

湖北省近500年区域干湿序列重建及其比较分析

在历史旱涝记载资料可靠性检验的基础上,重建了湖北省3个区域近500年来的干湿气候变化序列,并比较分析了各区域干湿气候变化的趋势特征、准周期性及跃变现象。结果表明:在3个区域中,鄂东区1570~1770、1890~1950年两个时段偏湿,1470~1520、1790~1830年则偏干;鄂北区偏湿时期主要在1470~1530、1710~1750、1850~1910年三个时段,1470~1530、1770~1830年则偏干;鄂西南区有1550~1610、1650~1710、1830~1890、1930~1990

The synthesis of ionic-liquid-functionalized multiwalled carbon nanotubes decorated with highly dispersed Au nanoparticles and their use in oxygen reduction by electrocatalysis

Multiwalled carbon nanotube (MWCNT)/ionic liquid/gold nanoparticle hybrid materials have been prepared by a chemical route that involves functionalization of MWCNT with amine-terminated ionic liquids followed by deposition of Au. Transmission electron microscopy revealed well-distributed Au with a narrow size distribution centered around 3.3 nm. The identity of the hybrid material was confirmed through Raman and X-ray photoelectron spectroscopy.

Effect of the addition of YAG(Y3Al5O12) nanopowder on the mechanical properties of lanthanum zirconate

La2Zr2O7 (LZ) is a promising thermal barrier coating material for the high-temperature applications, which could be significantly toughened by the YAG nanopowder incorporated into the matrix. The composites of xYAG/(1-x)LZ (Y=10, 15, 20 vol. %, LZ-x-YAG) were densified by means of high-pressure sintering (HPS) under a pressure of 4.5 GPa at 1650 degrees C for 5 min, by which a high-relative density above 93% could be obtained. The morphologies of the fractured surfaces were investigated by the scanning electron microscope, and the fracture toughness and Vicker's-hardness of the composites were evaluated by the microindentation. The grain size of the LZ matrix drops significantly with the addition of YAG nanoparticles and the fracture type changes from the intergranular to a mixture type of the transgranular and intergranular in the nanocomposites. The LZ-20-YAG nanocomposite has a fracture toughness of 1.93 MPa m(1/2), which is obviously higher than that of the pure LZ (1.57 MPa m(1/2)), and the toughening mechanism is discussed in this paper.

Electrogenerated chemiluminescence sensing platform using Ru(bpy)(3)(2+) doped silica nanoparticles and carbon nanotubes

An effective electrogenerated chemiluminescence (ECL) sensor was developed by coimmobilization of the Ru(bpy)(2)(3+)-doped silica (RuDS) nanoparticles and carbon nanotubes (CNTs) on glassy carbon electrode through hydrophobic interaction. The uniform RuDS nanoparticles were prepared by a water-in-oil (W/O) microemulsion method and Ru(bpy)(3)(2+) doped inside could still maintain its high ECL efficiency. With such unique immobilization method, a great deal of Ru(bpy)(3)(2+) was immobilized three-dimensionally on the electrode , which could greatly enhance the ECL response and result in the increased sensitivity. On the other hand, CNTs played dual roles as matrix to immobilize RuDS nanoparticles and promoter to accelerate the electron transfer between Ru(bpy)(3)(2+) and the electrode. The as-prepared ECL sensor displayed good sensitivity and stability.