The atmospheric stable boundary layer: Data analysis and comparison with similarity theories

The objective of this dissertation is to study the structure and behavior of the Atmospheric Boundary Layer (ABL) in stable conditions. This type of boundary layer is not completely well understood yet, although it is very important for many practical uses, from forecast modeling to atmospheric dispersion of pollutants. We analyzed data from the SABLES98 experiment (Stable Atmospheric Boundary Layer Experiment in Spain, 1998), and compared the behaviour of this data using Monin-Obukhov's similarity functions for wind speed and potential temperature. Analyzing the vertical profiles of various variables, in particular the thermal and momentum fluxes, we identified two main contrasting structures describing two different states of the SBL, a traditional and an upside-down boundary layer. We were able to determine the main features of these two states of the boundary layer in terms of vertical profiles of potential temperature and wind speed, turbulent kinetic energy and fluxes, studying the time series and vertical structure of the atmosphere for two separate nights in the dataset, taken as case studies. We also developed an original classification of the SBL, in order to separate the influence of mesoscale phenomena from turbulent behavior, using as parameters the wind speed and the gradient Richardson number. We then compared these two formulations, using the SABLES98 dataset, verifying their validity for different variables (wind speed and potential temperature, and their difference, at different heights) and with different stability parameters (zita or Rg). Despite these two classifications having completely different physical origins, we were able to find some common behavior, in particular under weak stability conditions.

Automotive diesel engine transient operation: modeling, optimization and control

Traditionally, the study of internal combustion engines operation has focused on the steady-state performance. However, the daily driving schedule of automotive engines is inherently related to unsteady conditions. There are various operating conditions experienced by (diesel) engines that can be classified as transient. Besides the variation of the engine operating point, in terms of engine speed and torque, also the warm up phase can be considered as a transient condition. Chapter 2 has to do with this thermal transient condition; more precisely the main issue is the performance of a Selective Catalytic Reduction (SCR) system during cold start and warm up phases of the engine. The proposal of the underlying work is to investigate and identify optimal exhaust line heating strategies, to provide a fast activation of the catalytic reactions on SCR. Chapters 3 and 4 focus the attention on the dynamic behavior of the engine, when considering typical driving conditions. The common approach to dynamic optimization involves the solution of a single optimal-control problem. However, this approach requires the availability of models that are valid throughout the whole engine operating range and actuator ranges. In addition, the result of the optimization is meaningful only if the model is very accurate. Chapter 3 proposes a methodology to circumvent those demanding requirements: an iteration between transient measurements to refine a purpose-built model and a dynamic optimization which is constrained to the model validity region. Moreover all numerical methods required to implement this procedure are presented. Chapter 4 proposes an approach to derive a transient feedforward control system in an automated way. It relies on optimal control theory to solve a dynamic optimization problem for fast transients. From the optimal solutions, the relevant information is extracted and stored in maps spanned by the engine speed and the torque gradient.

High gradient magnetic separation (HGMS) of erythrocytes infected with plasmodium falciparum

This thesis was undertaken to explore possible applications of high gradient magnetic separation (HGMS) for the separation of RBCs infected with Plasmodium falciparum, with the dual aim of establishing a novel and superior method for isolating late-stage infected cells, and of obtaining synchronized cell cultures.rnThe presented work presents protocols for HGMS of parasitized RBCs that fulfil these aims. Late-stage parasitized cell can be isolated essentially devoid of contamination with non-infected and ring-stage infected cells. Such an easy method for a highly quantitative and qualitative purification has not yet been reported. Synchronous cultures can be obtained both following depletion of late-stage infected cells, and following isolation of the latter. The quality of synchronization cultures matches that of sorbitol lysis, the current standard method for malaria culture synchronization. An advantage of HGMS is the avoidance of osmotic stress for RBCs. The new methods further have the appeal of high reproducibility, cost-effectiveness, and simple protocol.rnIt should be possible to take the methods beyond Plasmodium infected RBCs. Most magnetic separation techniques in the sector of biomedical research employ columns with a hydrophilic polymer-coated matrix. Our procedure employs an optimized buffer system. Polymer coating becomes unnecessary and uncoated columns are available at a fraction of the cost.

Genetic structuring of Eunicella singularis populations along a bathymetric gradient

Phenotypic plasticity refers to the ability of an organism to express different morphologies depending on the abiotic and biotic environment. Depth integrating many variables (e.g. temperature, light and hydrodynamics), may affect population structure and dynamics of the populations, as well as connectivity patterns and genetic diversity. Eunicella singularis is a Mediterranean arborescent gorgonian who plays an important rule as engineer species providing biomass and complexity to coralligenous habitats. It has a wide bathymetric distribution ranging from shallow rocky bottoms to deep sublittoral reefs. The species shows two depth-related morphotypes which taxonomic status is not yet clarified. The aim of the study is to analyses genetic variability and/or structuring along a vertical gradient to test the presence of the two morphotypes. Furthermore, a preliminary analyses of the phylogenetic relationship among species of the genus Eunicella has been done. Six populations of Eunicella singularis were sampled from 10 to 60 m depth in Cap de Creus and individuals belonging to Eunicella cavolinii, E. verrucosa, E. racemosa and E. stricta aphyta were collected. The genetic analyses were carried out using five microsatellite loci and ITS-1 sequence polymorphism. The results showed a reduction of genetic variability along the vertical gradient. A threshold in connectivity was observed across 30 - 40 m depth, confirming the presence of two different Eunicella singularis morphotypes. The two morphological forms could be due to phenotypic plasticity, which allowed populations to suit different environmental conditions, or to a break in gene flow that determined the isolation of the two populations and an accumulation of genetic differences. The molecular markers used were not able to clarify the phylogenetic relationship among Eunicella species and the systematic position of the two morphotypes, conversely they risen the question on the existence of single species of Mediterranean Eunicella.

Dielectrophoresis (dep) and electrowetting (ewod) as an anti-fouling process for antibacterial surfaces

Nowadays the medical field is struggling to decrease bacteria biofilm formation which leads to infection. Biomedical devices sterilization has not changed over a long period of time. This results in high costs for hospitals healthcare managements. The objective of this project is to investigate electric field effects and surface energy manipulation as solutions for preventing bacteria biofilm for future devices. Based on electrokinectic environments 2 different methods were tested: feasibility of electric gradient through mediums (DEP) reinforced by numerical simulations; and EWOD by the fabrication of golden interdigitated electrodes on silicon glass substrates, standard ~480 nm Teflon (PTFE) layer and polymeric gasket to contain the bacteria medium. In the first experiment quantitative analysis was carried out to achieve forces required to reject bacteria without considering dielectric environment limitations as bacteria and medium frequency dependence. In the second experiment applied voltages was characterized by droplets contact angle measurements and put to the live bacteria tests. The project resulted on promising results for DEP application due to its wide range of frequency that can be used to make a “general” bacteria rejecting; but in terms of practicality, EWOD probably have higher potential for success but more experiments are needed to verify if can prevent biofilm adhesion besides the Teflon non-adhesive properties (including limitations as Teflon breakthrough, layer sensitivity) at incubation times larger than 24 hours.

Investigation of the lithium ion mobility in cyclic model compounds and their ion conducting properties

Efficient energy storage and conversion is playing a key role in overcoming the present and future challenges in energy supply. Batteries provide portable, electrochemical storage of green energy sources and potentially allow for a reduction of the dependence on fossil fuels, which is of great importance with respect to the issue of global warming. In view of both, energy density and energy drain, rechargeable lithium ion batteries outperform other present accumulator systems. However, despite great efforts over the last decades, the ideal electrolyte in terms of key characteristics such as capacity, cycle life, and most important reliable safety, has not yet been identified. rnrnSteps ahead in lithium ion battery technology require a fundamental understanding of lithium ion transport, salt association, and ion solvation within the electrolyte. Indeed, well-defined model compounds allow for systematic studies of molecular ion transport. Thus, in the present work, based on the concept of ‘immobilizing’ ion solvents, three main series with a cyclotriphosphazene (CTP), hexaphenylbenzene (HBP), and tetramethylcyclotetrasiloxane (TMS) scaffold were prepared. Lithium ion solvents, among others ethylene carbonate (EC), which has proven to fulfill together with pro-pylene carbonate safety and market concerns in commercial lithium ion batteries, were attached to the different cores via alkyl spacers of variable length.rnrnAll model compounds were fully characterized, pure and thermally stable up to at least 235 °C, covering the requested broad range of glass transition temperatures from -78.1 °C up to +6.2 °C. While the CTP models tend to rearrange at elevated temperatures over time, which questions the general stability of alkoxide related (poly)phosphazenes, both, the HPB and CTP based models show no evidence of core stacking. In particular the CTP derivatives represent good solvents for various lithium salts, exhibiting no significant differences in the ionic conductivity σ_dc and thus indicating comparable salt dissociation and rather independent motion of cations and ions.rnrnIn general, temperature-dependent bulk ionic conductivities investigated via impedance spectroscopy follow a William-Landel-Ferry (WLF) type behavior. Modifications of the alkyl spacer length were shown to influence ionic conductivities only in combination to changes in glass transition temperatures. Though the glass transition temperatures of the blends are low, their conductivities are only in the range of typical polymer electrolytes. The highest σ_dc obtained at ambient temperatures was 6.0 x 10-6 S•cm-1, strongly suggesting a rather tight coordination of the lithium ions to the solvating 2-oxo-1,3-dioxolane moieties, supported by the increased σ_dc values for the oligo(ethylene oxide) based analogues.rnrnFurther insights into the mechanism of lithium ion dynamics were derived from 7Li and 13C Solid- State NMR investigations. While localized ion motion was probed by i.e. 7Li spin-lattice relaxation measurements with apparent activation energies E_a of 20 to 40 kJ/mol, long-range macroscopic transport was monitored by Pulsed-Field Gradient (PFG) NMR, providing an E_a of 61 kJ/mol. The latter is in good agreement with the values determined from bulk conductivity data, indicating the major contribution of ion transport was only detected by PFG NMR. However, the μm-diffusion is rather slow, emphasizing the strong lithium coordination to the carbonyl oxygens, which hampers sufficient ion conductivities and suggests exploring ‘softer’ solvating moieties in future electrolytes.rn

Intra- and interspecific competition in western barbastelle bats (Barbastella barbastellus, SCHREBER 1774)

In the present thesis I examined individual and sex-specific habitat use and site fidelity in the western barbastelle bat, Barbastella barbastellus, using data from a four-year monitoring in a Special Area of Conservation in Rhineland-Palatinate, Germany. The western barbastelle occurs in central and southern Europe from Portugal to the Caucasus, but is considered to be rare in large parts of its range. Up to now, long-term field studies to assess interannual site fidelity and the possible effects of intra- and interspecific competition have not been studied in this species. Nevertheless, such data provide important details to estimate the specific spatial requirements of its populations, which in turn can be incorporated in extended conservation actions. I used radio-telemetry, home range analyses und automated ultrasound detection to assess the relation between landscape elements and western barbastelle bats and their roosts. In addition, I estimated the degree of interspecific niche overlap with two selected forest-dwelling bat species, Bechstein's bat (Myotis bechsteinii) and the brown long-eared bat (Plecotus auritus). Intra- and interannual home range overlap analyses of female B. barbastellus revealed that fidelity to individual foraging grounds, i.e. a traditional use of particular sites, seems to effect the spatial distribution of home ranges more than intraspecific competition among communally roosting females. The results of a joint analysis of annual maternity roost selection and flight activities along commuting corridors highlight the necessity to protect roost complexes in conjunction with commuting corridors. Using radio-tracking data and an Euclidean distance approach I quantified the sex-specific and individual habitat use by female and male western barbastelle bats within their home ranges. My data indicated a partial sexual segregation in summer habitats. Females were found in deciduous forest patches and preferably foraged along linear elements within the forest. Males foraged closer to forest edges and in open habitats. Finally, I examined the resource partitioning between the western barbastelle bat and two syntopic bat species with a potential for interspecific competition due to similarities in foraging strategies, prey selection and roost preferences. Simultaneous radio-tracking of mixed-species pairs revealed a partial spatial separation of the three syntopic bat species along a gradient from the forest to edge habitats and open landscape. Long-eared bats were found close to open habitats which were avoided by the other two species. B. barbastellus preferred linear landscape elements (edge habitats) and forests, M. bechsteinii also preferred forest habitats. Only little overlap in terms of roost structure and tree species selection was found.

Numerical and experimental investigation of turbulent dissipation

Turbulent energy dissipation is presented in the theoretical context of the famous Kolmogorov theory, formulated in 1941. Some remarks and comments about this theory help the reader understand the approach to turbulence study, as well as give some basic insights to the problem. A clear distinction is made amongst dissipation, pseudo-dissipation and dissipation surrogates. Dissipation regulates how turbulent kinetic energy in a flow gets transformed into internal energy, which makes this quantity a fundamental characteristic to investigate in order to enhance our understanding of turbulence. The dissertation focuses on experimental investigation of the pseudo-dissipation. Indeed this quantity is difficult to measure as it requires the knowledge of all the possible derivatives of the three dimensional velocity field. Once considering an hot-wire technique to measure dissipation we need to deal with surrogates of dissipation, since not all the terms can be measured. The analysis of surrogates is the main topic of this work. In particular two flows, the turbulent channel and the turbulent jet, are considered. These canonic flows, introduced in a brief fashion, are often used as a benchmark for CFD solvers and experimental equipment due to their simple structure. Observations made in the canonic flows are often transferable to more complicated and interesting cases, with many industrial applications. The main tools of investigation are DNS simulations and experimental measures. DNS data are used as a benchmark for the experimental results since all the components of dissipation are known within the numerical simulation. The results of some DNS were already available at the start of this thesis, so the main work consisted in reading and processing the data. Experiments were carried out by means of hot-wire anemometry, described in detail on a theoretical and practical level. The study of DNS data of a turbulent channel at Re=298 reveals that the traditional surrogate can be improved Consequently two new surrogates are proposed and analysed, based on terms of the velocity gradient that are easy to measure experimentally. We manage to find a formulation that improves the accuracy of surrogates by an order of magnitude. For the jet flow results from a DNS at Re=1600 of a temporal jet, and results from our experimental facility CAT at Re=70000, are compared to validate the experiment. It is found that the ratio between components of the dissipation differs between DNS and experimental data. Possible errors in both sets of data are discussed, and some ways to improve the data are proposed.

The effect of diffusion gradient direction number on tractography of corticospinal tract in human brain: an along-tract analysis

Nel presente lavoro di tesi ho sviluppato un metodo di analisi di dati di DW-MRI (Diffusion-Weighted Magnetic Resonance Imaging)cerebrale, tramite un algoritmo di trattografia, per la ricostruzione del tratto corticospinale, in un campione di 25 volontari sani. Il diffusion tensor imaging (DTI) sfrutta la capacità del tensore di diffusione D di misurare il processo di diffusione dell’acqua, per stimare quantitativamente l’anisotropia dei tessuti. In particolare, nella sostanza bianca cerebrale la diffusione delle molecole di acqua è direzionata preferenzialmente lungo le fibre, mentre è ostacolata perpendicolarmente ad esse. La trattografia utilizza le informazioni ottenute tramite il DW imaging per fornire una misura della connettività strutturale fra diverse regioni del cervello. Nel lavoro si è concentrata l’attenzione sul fascio corticospinale, che è coinvolto nella motricità volontaria, trasmettendo gli impulsi dalla corteccia motoria ai motoneuroni del midollo spinale. Il lavoro si è articolato in 3 fasi. Nella prima ho sviluppato il pre-processing di immagini DW acquisite con un gradiente di diffusione sia 25 che a 64 direzioni in ognuno dei 25 volontari sani. Si è messo a punto un metodo originale ed innovativo, basato su “Regions of Interest” (ROIs), ottenute attraverso la segmentazione automatizzata della sostanza grigia e ROIs definite manualmente su un template comune a tutti i soggetti in esame. Per ricostruire il fascio si è usato un algoritmo di trattografia probabilistica che stima la direzione più probabile delle fibre e, con un numero elevato di direzioni del gradiente, riesce ad individuare, se presente, più di una direzione dominante (seconda fibra). Nella seconda parte del lavoro, ciascun fascio è stato suddiviso in 100 segmenti (percentili). Sono stati stimati anisotropia frazionaria (FA), diffusività media, probabilità di connettività, volume del fascio e della seconda fibra con un’analisi quantitativa “along-tract”, per ottenere un confronto accurato dei rispettivi percentili dei fasci nei diversi soggetti. Nella terza parte dello studio è stato fatto il confronto dei dati ottenuti a 25 e 64 direzioni del gradiente ed il confronto del fascio fra entrambi i lati. Dall’analisi statistica dei dati inter-subject e intra-subject è emersa un’elevata variabilità tra soggetti, dimostrando l’importanza di parametrizzare il tratto. I risultati ottenuti confermano che il metodo di analisi trattografica del fascio cortico-spinale messo a punto è risultato affidabile e riproducibile. Inoltre, è risultato che un’acquisizione con 25 direzioni di DTI, meglio tollerata dal paziente per la minore durata dello scan, assicura risultati attendibili. La principale applicazione clinica riguarda patologie neurodegenerative con sintomi motori sia acquisite, quali sindromi parkinsoniane sia su base genetica o la valutazione di masse endocraniche, per la definizione del grado di contiguità del fascio. Infine, sono state poste le basi per la standardizzazione dell’analisi quantitativa di altri fasci di interesse in ambito clinico o di studi di ricerca fisiopatogenetica.

Analysis of evening and morning transitions in complex terrain: MATERHORN campaign 2013

A field study of thermal circulation over very gentle slope is described for a specific day characterised by weak synoptic conditions. The emphasis was on morning and evening transitions, but measurements cover the entire day; therefore a brief analysis is performed to represent the general thermal circulation pattern. Both transition periods are characterised by complex dynamic behaviours. During evening transition, the upslope flow has got through a stagnation condition characterised by wind velocity U<0:5 m=s. Only when the stagnating air has become negative buoyant, the flow is allowed to pour downslope like a slab. Some features of front formation has been found during the transition development, such as delay time of downslope flow start up along the slope, and the presence of positive turbulent kinetic energy at the onset of the motion. Eventually the observed evening transition has followed a mixed mechanisms, with features from different models. Therefore the Rayleigh number seems not to be a good criterion by which parametrise evening transition itself. Morning transition is characterised by destruction of nocturnal temperature inversion and the onset of upslope flow. Inversion destruction can be described in terms of CBL growth at surface and inversion decent from the top of the layer. KH has found to be a good indicator of inversion breakup, if used as parameter to study the inversion breakup in terms of temperature reversal. After the inversion breakup, buoyancy and mechanical productions supply the flow with the necessary energy to start the upslope wind. More quantitative analysis are provided by the study of stability parameters and turbulent kinetic energy budgets. Gradient Richardson number has been used in this terms, finding that a mixed SBL-CBL behaviour dominates the most of the observed layers. Tke budget has shown high turbulent behaviour during morning transition while the evening transition has developed entirely in laminar condition, apart from short intermittent turbulent events.

Diagnostic performance and accuracy of 3-D spoiled gradient-dual-echo MRI with water- and fat-signal separation in liver-fat quantification: comparison to liver biopsy

To prospectively evaluate a 3-dimensional spoiled gradient-dual-echo (3D SPGR-DE) magnetic resonance imaging (MRI) sequence for the qualitative and quantitative analysis of liver fat content (LFC) in patients with the suspicion of fatty liver disease using histopathology as the standard of reference.