Svalbard 2010 mesocosm experiment: Protistan diversity

Hierarchical clustering. Taxonomic assignment of reads was performed using a preexisting database of SSU rDNA sequences from including XXX reference sequences generated by Sanger sequencing. Experimental amplicons (reads), sorted by abundance, were then concatenated with the reference extracted sequences sorted by decreasing length. All sequences, experimental and referential, were then clustered to 85% identity using the global alignment clustering option of the uclust module from the usearch v4.0 software (Edgar, 2010). Each 85% cluster was then reclustered at a higher stringency level (86%) and so on (87%, 88%,.) in a hierarchical manner up to 100% similarity. Each experimental sequence was then identified by the list of clusters to which it belonged at 85% to 100% levels. This information can be viewed as a matrix with the lines corresponding to different sequences and the columns corresponding to the cluster membership at each clustering level. Taxonomic assignment for a given read was performed by first looking if reference sequences clustered with the experimental sequence at the 100% clustering level. If this was the case, the last common taxonomic name of the reference sequence(s) within the cluster was used to assign the environmental read. If not, the same procedure was applied to clusters from 99% to 85% similarity if necessary, until a cluster was found containing both the experimental read and reference sequence(s), in which case sequences were taxonomically assigned as described above.

Morphometry and microphotographs of devonian stromatoporoids from southern Poland

Famennian Stromatoporoidea from the Quasiendothyra communis Foraminiferal Zone and slightly younger strata from the Debnik anticline, southern Poland, form a succession of three consecutive assemblages. Assemblages 1 and 3 consist of representatives of the order Clathrodictyida, while assemblage 2 is dominated by the order Labechiida. The clathrodictyids are represented by the genus Gerronostroma, and labechiids are represented by the genus Stylostroma. Species assigned here to the genus Gerronostroma show a network of amalgamated pillars in the central part of the columns, a feature regarded by previous authors as typical of the genus Clavidictyon. Two new species, Stylostroma multiformis sp. nov. and Gerronostroma raclaviense sp. nov., are described. Stromatoporoids from southern Poland differ from the Famennian fauna of western Europe, showing affinity to eastern European and Siberian Stromatoporoidea.

Concentrations of As and other chemical elements in bottom sediments of the Baltic Sea

As is less toxic than Hg, Cd, Pb, Se, Zn, and Cu. The As clarke for clays and shales is 10 ppm. Our samples of bottom sediments from Kurshskii Bay were determined to contain from 15 to 26 ppm As and up to 34 ppm As in the vicinity of the Neman River mouth. Elevated As concentrations (50-114 ppm) were detected in four columns of subsurface bottom sediments (at depths of 10-65 cm) from the Vistula Lagoon. Elevated As concentrations (50-180 ppm) were also found in a few surface samples of sand from the Gdansk Deep near oil platform D-6. These sediments are either partly contaminated with anthropogenic As or contain Fe sulfides and glauconite, which can concentrate As and contain its elevated concentrations. The As concentration in columns of bottom sediments from the Gulf of Finland were at the natural background level (throughout the columns) typical of the area (9-34 ppm). We repeatedly detected very high As concentrations (up to 227 ppm As) in politic ooze from Bornholm Deep, in the vicinity of the sunken vessel with chemical weapons. The sources of elevated As concentrations in the Baltic Sea are the following: (1) chemical weapon (CW) material buried in the floor of the Baltic Sea; (2) As-bearing pesticides, agricultural mineral fertilizers, and burned coal and other fuels; (3) kerogen-bearing Ordovician rocks exposed on the bottom; and (4) As-rich Fe sulfides brought to the area together with construction sand and gravel. This mixture was used in paper production and for the construction of hydraulic engineering facilities in the Vistula Lagoon in the early 20th century and later caused the so-called lagoon disease.

Jelly biomass sinking speed reveals a fast carbon export mechanism

Sinking of gelatinous zooplankton biomass is an important component of the biological pump removing carbon from the upper ocean. The export efficiency, e.g., how much biomass reaches the ocean interior sequestering carbon, is poorly known because of the absence of reliable sinking speed data. We measured sinking rates of gelatinous particulate organic matter (jelly-POM) from different species of scyphozoans, ctenophores, thaliaceans, and pteropods, both in the field and in the laboratory in vertical columns filled with seawater using high-quality video. Using these data, we determined taxon-specific jelly-POM export efficiencies using equations that integrate biomass decay rate, seawater temperature, and sinking speed. Two depth scenarios in several environments were considered, with jelly-POM sinking from 200 and 600 m in temperate, tropical, and polar regions. Jelly-POM sank on average between 850 and 1500 m/d (salps: 800-1200 m/d; ctenophores: 1200-1500 m/d; scyphozoans: 1000-1100 m d; pyrosomes: 1300 m/d). High latitudes represent a fast-sinking and low-remineralization corridor, regardless of species. In tropical and temperate regions, significant decomposition takes place above 1500 m unless jelly-POM sinks below the permanent thermocline. Sinking jelly-POM sequesters carbon to the deep ocean faster than anticipated, and should be incorporated into biogeochemical and modeling studies to provide more realistic quantification of export via the biological carbon pump worldwide.

Population genetic and dispersal modeling data for Bathymodiolus mussels from the Mid-Atlantic Ridge

The zip folder comprises a text file and a gzipped tar archive. 1) The text file contains individual genotype data for 90 SNPs, 9 microsatellites and the mitochondrial ND4 gene that were determined in deep-sea hydrothermal vent mussels from the Mid-Atlantic Ridge (genus Bathymodiolus). Mussel specimens are grouped according to the population (pop)/location from which they have been sampled (first column). The remaining columns contain the respective allele/haplotype codes for the different genetic loci (names in the header line). The data file is in CONVERT format and can be directly transformed into different input files for population genetic statistics. 2) The tar archive contains NetCDF files with larval dispersal probabilities for simulated annual larval releases between 1998 and 2007. For each simulated vent location (Menez Gwen, Lucky Strike, Rainbow, Vent 1-10) two NetCDF files are given, one for an assumed pelagic larval duration of 1 year and the other one for an assumed pelagic larval duration of 6 months (6m).

(Table 2) Chemical composition of basalts from the DSDP Leg 74 Walvis Ridge transect

Five sites were drilled along a transect of the Walvis Ridge. The basement rocks range in age from 69 to 71 m.y., and the deeper sites are slightly younger, in agreement with the sea-floor-spreading magnetic lineations. Geophysical and petrological evidence indicates that the Walvis Ridge was formed at a mid-ocean ridge at anomalously shallow elevations. The basement complex, associated with the relatively smooth acoustic basement in the area, consists of pillowed basalt and massive flows alternating with nannofossil chalk and limestone that contain a significant volcanogenic component. Basalts are quartz tholeiites at the ridge crest and olivine tholeiites downslope. The sediment sections are dominated by carbonate oozes and chalks with volcanogenic material common in the lower parts of the sediment columns. The volcanogenic sediments probably were derived from sources on the Walvis Ridge. Paleodepth estimates based on the benthic fauna are consistent with a normal crustal-cooling rate of subsidence of the Walvis Ridge. The shoalest site in the transect sank below sea level in the late Paleocene, and benthic fauna suggest a rapid sea-level lowering in the mid-Oligocene. Average accumulation rates during the Cenozoic indicate three peaks in the rate of supply of carbonate to the sea floor, that is, early Pliocene, late middle Miocene, and late Paleocene to early Eocene. Carbonate accumulation rates for the rest of the Cenozoic averaged 1 g/cm**2/kyr. Dissolution had a marked effect on sediment accumulation in the deeper sites, particularly during the late Miocene, Oligocene, and middle to late Eocene. Changes in the rates of accumulation as a function of depth demonstrate that the upper part of the water column had a greater degree of undersaturation with respect to carbonate during times of high productivity. Even when the calcium carbonate compensation depth (CCD) was below 4400 m, a significant amount of carbonate was dissolved at the shallower sites. The flora and fauna of the Walvis Ridge are temperate in nature. Warmer-water faunas are found in the uppermost Maastrichtian and lower Eocene sediments, with cooler-water faunas present in the lower Paleocene, Oligocene, and middle Miocene. The boreal elements of the lower Pliocene are replaced by more temperate forms in the middle Pliocene. The Cretaceous-Tertiary boundary was recovered in four sites drilled, with the sediments containing well-preserved nannofossils but poorly preserved foraminifera.

Nonparametric Message Passing Methods for Cooperative Localization and Tracking

The objective of this thesis is the development of cooperative localization and tracking algorithms using nonparametric message passing techniques. In contrast to the most well-known techniques, the goal is to estimate the posterior probability density function (PDF) of the position of each sensor. This problem can be solved using Bayesian approach, but it is intractable in general case. Nevertheless, the particle-based approximation (via nonparametric representation), and an appropriate factorization of the joint PDFs (using message passing methods), make Bayesian approach acceptable for inference in sensor networks. The well-known method for this problem, nonparametric belief propagation (NBP), can lead to inaccurate beliefs and possible non-convergence in loopy networks. Therefore, we propose four novel algorithms which alleviate these problems: nonparametric generalized belief propagation (NGBP) based on junction tree (NGBP-JT), NGBP based on pseudo-junction tree (NGBP-PJT), NBP based on spanning trees (NBP-ST), and uniformly-reweighted NBP (URW-NBP). We also extend NBP for cooperative localization in mobile networks. In contrast to the previous methods, we use an optional smoothing, provide a novel communication protocol, and increase the efficiency of the sampling techniques. Moreover, we propose novel algorithms for distributed tracking, in which the goal is to track the passive object which cannot locate itself. In particular, we develop distributed particle filtering (DPF) based on three asynchronous belief consensus (BC) algorithms: standard belief consensus (SBC), broadcast gossip (BG), and belief propagation (BP). Finally, the last part of this thesis includes the experimental analysis of some of the proposed algorithms, in which we found that the results based on real measurements are very similar with the results based on theoretical models.

Análisis teórico-experimental de pilares y vigas de hormigón armado reforzados con fibra de carbono

El presente trabajo se refiere al estudio teórico-experimental del comportamiento de pilares y vigas de hormigón armado reforzados con fibra de carbono o CFRP. El análisis se realiza considerando que los pilares se refuerzan mediante la técnica de adhesión de tejidos de fibra de carbono, generando un efecto de confinamiento. Las vigas se refuerzan mediante la incorporación de barras del mismo material, con refuerzos a cortante. El objetivo es poder comparar el estudio analítico de este tipo de refuerzos con resultados experimentales obtenidos con anterioridad a la realización de este documento, y así poder obtener conclusiones de las posibles diferencias. Hay que señalar que los modelos experimentales no forman parte de este estudio. Los ensayos en pilares fueron realizados en sección cuadrada y circular evaluando la rotura a compresión de las piezas, habiendo sido éstas escaladas con un factor de reducción de 2,3. Los ensayos correspondientes a vigas se realizaron en sección rectangular, centrándose en la evaluación de la rotura a flexión y habiendo sido escaladas igualmente, pero con un factor de reducción de 1:2. El documento se estructura en cuatro capítulos, cuyo contenido se expone de forma concisa a continuación. En el capítulo uno o marco teórico se exponen los principios de comportamiento y tipologías de los pilares y vigas de hormigón armado, las bases teóricas de su refuerzo y confinamiento, así como las diversas técnicas de refuerzo existentes. Se detalla la técnica con FRP, comparando y analizando sus ventajas e inconvenientes. En el capítulo dos se expone el proceso de fabricación, refuerzo y resultados de los modelos experimentales realizados para ambos elementos estructurales. La obtención de los modelos teóricos forma parte del capítulo tres, comparándose con los resultados experimentales en el cuarto capítulo. Finalmente, en el último capítulo se presentan las conclusiones obtenidas al realizar esta comparativa en el refuerzo de vigas y pilares con fibra de carbono. This work refers to the theoretical and experimental study of the behavior of CFRP reinforced concrete columns and beams. The analysis was done considering that the pillars are reinforced by CFRP wrapping technique, resulting in a confinement effect. The beams are reinforced by the addition of bars of the same material, with shear reinforcements. The objective is to compare the analytical study of this type of reinforcement with experimental results obtained prior to the performance of this document, and draw conclusions for any differences. Notice that experimental models are not part of this study. The tests were performed on circular and square section pillars, evaluating compression fracture of the pieces, having been scaled down with a factor of 2.3. The tests were performed on rectangular section beams, focusing on evaluation of the bending fracture and being scaled down equally, but with a factor of 1:2. The document is divided into four chapters, whose content is set out concisely below. The chapter one or theoretical framework sets out the principles of behavior and types of columns and beams of reinforced concrete, the theoretical basis of its reinforcement and confinement, as well as various existing reinforcement techniques. CFRP technique it’s detailed, comparing and analyzing their advantages and disadvantages. Chapter two describes the process of manufacture, reinforcement and results of experimental models made for both structural elements. Chapter three shows the obtaining of the theoretical models, comparing them with the experimental results in the fourth chapter. Finally, the last chapter presents the conclusions to make this comparison in the strengthening of beams and columns with carbon fiber.

Critical aspects of substrate nanopatterning for the ordered growth of GaN nanocolumns.

Precise and reproducible surface nanopatterning is the key for a successful ordered growth of GaN nanocolumns. In this work, we point out the main technological issues related to the patterning process, mainly surface roughness and cleaning, and mask adhesion to the substrate. We found that each of these factors, process-related, has a dramatic impact on the subsequent selective growth of the columns inside the patterned holes. We compare the performance of e-beam lithography, colloidal lithography, and focused ion beam in the fabrication of hole-patterned masks for ordered columnar growth. These results are applicable to the ordered growth of nanocolumns of different materials.

Floating liquid zones

The aim of our experiment on the Spacelab Dl Mission was to study the stability of long liquid columns under microgravity. Nominal configuration was a cylindrical liquid bridge anchored at the edges of two equal solid discs, 35 mm in diameter. Mechanical stimuli were applied through the discs and the liquid outer shape recorded for analysis. Nominal experiment procedures [1] were similar to those proposed for Spacelab-1 (1983), where by wetting problems allowed only partial success [2]. The same Fluid Physics Module, but with corrected end discs and a manually operated syringe for liquid injection, was used.

Afectación de los agrosistemas de la zona del Caño San Miguel por la salinización de los suelos

La degradación por salinización de los suelos regados con aguas salobres viene aumentando a escala mundial. El problema de la concentración de sales más solubles que el yeso depende principalmente del agua de riego, la aridez climática y la ausencia de drenaje. Estas condiciones se dan en el aluvium del río Limón, que es un tributario del lago Maracaibo, sito en el estado de Zulia de Venezuela. La regulación del río Limón mediante el cierre de los embalses de Manuelote y Tulé ha disminuido los aportes de aguas y sedimentos de las avenidas de inundación, que tienen carácter diluyente. Por otro lado, el balance de sales solubles en el suelo ha registrado una acumulación neta en los años de extrema aridez anteriores al año 2006, dado que la mayor dilución de las aguas ombrogénicas embalsadas procedentes de las lluvias no ha sido suficiente para compensar la concentración por evapotranspiración “in situ” de las aguas retenidas en la cuenca baja, sobre todo en ausencia de desagüe superficial y drenaje profundo. Las inundaciones posteriores a 2006 fueron suficientes para disminuir la salinidad superficial hasta los valores encontrados en 2010. El estudio experimental de esta problemática en el sector del caño San Miguel ha sido abordado mediante el establecimiento del perfil de salinidad acoplado con el perfil hipotético de humedad usado en la taxonomía de suelos. Este perfil define la disponibilidad del agua del suelo para la vegetación en función de tres potenciales: 1) el potencial físico-químico o matricial, que depende de la energía de adsorción a la superficie de las partículas; 2) el potencial gravitatorio, que depende de la profundidad; y 3) el potencial osmótico, que depende de la concentración de la solución del suelo; lo que supone un avance respecto a tener en cuenta sólo el perfil de humedad, que solamente considera el potencial gravi-químico integrado por el matricial y el gravitatorio. El perfil normalizado de 200 mm de de agua útil, retenida entre 33 y 1500 kPa de succión, incluye ocho fases gravi-químicas de 25 mm. La presente investigación incluye el potencial osmótico estimado por la conductividad eléctrica del extracto de pasta saturada. Los experimentos de lavado de sales en columnas de suelo, simulando la distribución de las lluvias en cinco años representativos de los cuartiles estadísticos de la serie disponible de 38 años completos, han determinado el comportamiento de las sales solubles en un suelo sometido a drenaje. Los resultados han evidenciado que el balance de sales unido al balance de agua controla la degradación de los agrosistemas por salinización. La alternativa frutícola puede ser aumentada en estas condiciones, porque el balance de sales favorece el establecimiento de cultivos permanentes a costa de otros usos del suelo de menor interés económico, como el cultivo de forrajes en regadío y el aprovechamiento de los pastizales en secano durante el barbecho de desalinización, cuya caracterización se ha completado con el estudio de la vegetación indicadora del grado de salinidad. ABSTRACT Saline degradation of soils irrigated with brackish water is increasing worldwide. The problem of salts concentration more soluble than gypsum depends on irrigation water quality, climatic aridity, and drainage limitations. These conditions meet in Limón River alluvium, which is tributary to Maracaibo´s Lake in Zulia State, Venezuela. Limón River regulation by closing Manuelote and Tulé reservoirs has diminished the input of water and sediments from inundations, which exerted dilutive effects. On the other hand, the soil balance of soluble salts has registered a net accumulation during those extremely dry years before 2006 because the greater dilution of ombrogenic dammed water coming from rain has not been enough to compensate salt concentration by “in situ” evapotranspiration in middle basin water, mainly in the absence of superficial runoff and deep drainage. Floods after 2006 were enough to reduce the high superficial salinity figures to those addressed in 2010. The experimental study of this trouble in San Miguel´s pipe area has been addressed through of the establishment of its salinity profile together to the hypothetic moisture profile typically used in soil taxonomy. This salinity profile describes soil water availability for vegetation according to three potentials: 1) physico-chemical or matrix potential, which depends on the adsorption energy of the soil solution to the surface of soil particles; 2) gravitational potential, which depends on soil depth; and 3) osmotic potential, which depends on the concentration of the soil solution. This represents an advance from just using moisture regime, which only considers the matrix and gravitational components of a gravi-chemical potential. The standardized moisture profile of 200 mm useful water being retained between 33 and 1500 kPa includes eight gravi-chemical stages of 25 mm. This research also includes the osmotic component, which is estimated by the electric conductivity of the saturated paste extract. Salts leaching trials in soil columns simulating rain distribution along five model years, representing the statistical quartiles of the available series of 38 complete years, have determined the behaviour of soluble salts in a soil being subjected to drainage. Results have evidenced that salt and water balances considered together are able to control the agrosystem’s degradation by salinization. The fruit production alternative could be improved under these conditions because the salts balance favours the establishment of permanent crops to the detriment of other soil uses of lower economical interest such as irrigated forage and non-irrigated pasture during desalinization fallow, which characterization has been completed through assessing the presence of salinity-indicator vegetation.

Bio recuperación de suelos salinos con el uso de materiales orgánicos.

El suelo es un importante recurso natural que necesita ser preservado y mejorado para permitirle mantener su calidad y capacidad productiva, para ello se deben proponer y aplicar prácticas sostenibles que permitan recuperar aquellos suelos degradados por un mal manejo del hombre, como por ejemplo la salinización. El objetivo planteado fue evaluar la biorecuperación de un suelo con problemas salino-sódico con la aplicación de dos proporciones (1,5 y 3% (p/p)) de tres enmiendas orgánicas: compost, vermicompost sólido y Lemna mesclados o no con el 100% de los requerimientos de fosfoyeso, generándose 15 tratamientos (incluyendo tres controles). La evaluación se realizó a través de tres ensayos: 1. Columnas simuladas de suelo. 2. Evolución de CO2 y 3. Crecimiento de plántulas de tomate. El suelo objeto de estudio está clasificado my como Fluventic Haplustepts, y fue tomado de una zona de la Hacienda Alto Viento, con una latitud de 10° 2' 15 N y una longitud de 72 ° 34' 15 W, en el estado de Zulia – Venezuela. Se tomó una muestra compuesta por 20 submuestras de 20 cm de profundidad del área problema, se secó al aire (2,3% de humedad), se tamizó y homogenizó. El suelo y las enmiendas orgánicas fueron caracterizadas. Los materiales orgánicos; compost y vermicompost fueron procesados en la misma Hacienda con el uso de estiércol de ganado bovino; la Lemna fue recolectada de orillas del Lago de Maracaibo en la ciudad de Maracaibo. El suelo se mezcló a las proporciones indicadas se le midió respiración basal y el efecto sobre la germinación de semillas de tomate y se empaquetó en un tubo de polietileno de 7,1 cm de diámetro y 70 a 90 cm de longitud, según la altura de la mezcla del suelo con la enmienda. El fondo de cada columna fue rellenado con 40 cm de arena lavada para facilitar el drenaje. En cada columna se utilizó la misma cantidad de suelo (1055 mg), la altura que ocupó dentro de las columnas dependió del tipo de enmienda orgánica y su proporción, la cual modificó la Da del suelo (1,328±0,05 g•cm-3). La altura dentro de la columna varió desde 20 cm para el suelo sin enmienda hasta 38,33±0,8 cm para el suelo enmendado con Lemna al 3,0%. Transcurrido el periodo de tres meses tiempo en el cual el suelo enmendado y colocado en las columnas fue lavado con una cantidad de agua que equivalente a la tasa de infiltración, la cual se calculó a partir de la precipitación anual de la zona y las perdidas por evaporación y escorrentía; se fraccionó en tres secciones de 7, 7 y 6 cm de longitud, y el suelo de cada fracción se secó al aire y se tamizó, y se le midió CEextr, pH, cationes en solución y cationes extraíbles para calcular el RAS y el PSI. Se tomó una cantidad equivalente de cada sección para conformar una muestra de 50 g de suelos a los cuales se le midió respiración basal e igualmente se tomó suelo para evaluar la germinación y crecimiento de plántulas de tomate. Se detectaron diferencias significativa (p<0,05) entre tratamientos, según la prueba de Tukey, para la variables evaluadas, aunque no hubo diferencias entre las proporciones ni entre la utilización del fosfoyeso mezclado con las enmiendas orgánicas. La enmienda que mostró menos potencial en la bio remediación fue la Lemna por sus altos contenidos de Na+. La metodología de las columnas simuladas del suelo, bajo las condiciones de estudio, no fue del todo adecuada para evaluar la bio remediación debido que en el suelo control por efecto de la aplicación de agua también hubo recuperación del mismo por su disminución en el la CE, RAS y PSI y en algunas variables su recuperación fue mayor que en aquellos enmendados con Lemna. Tomando en la respuesta del cultivo la mejor enmienda fue el vermicompost Abstract The soil is an important natural resource that needs to be preserved and improved to maintain its quality and production potential. Therefore, it is necessary to propose and apply sustainable practices that permit the recovery of soils that have been degraded by inadequate management, among these saline soils. The objective of this study was to evaluate the bioremediation of a saline-sodic soil through the application of two proportions (1,5 and 3% (p/p) of three organic amendments: compost, vermicompost and Lemna, mixed or not with gypsum phosphate, resulting in 15 treatments (including 3 controls). The evaluation was conducted through three tests: 1. Simulated soil columns. 2. Evolution of CO2 and 3. Growth of tomato seedlings The soil under evaluation was classified as Fluventic Haplustepts and was collected from the Alto Viento farm located at 10° 2' 15 North Latitude and 72° 34' 15 West longitude, in Zulia State, Venezuela. A composite soil sample, integrated of 20 subsamples taken to a depth of 20 cm collected in the problem area, was air dried (2.3 % moisture), sieved and homogenized. Soil and organic amendments were characterized. Organic material for the compost and vermicompost were obtained on the farm using cattle manure, whereas the Lemna was collected from the shores of Lake Maracaibo outside Maracaibo city. The soil was mixed in the above-mentioned proportions and its baseline respiration rate and effect on the germination of tomato seeds were recorded. Soil was packed in a PVC pipe (7,1 cm diameter and 70-90 cm length) to simulate a soil column. The bottom of each column was filled out with 40 cm of washed sand to facilitate drainage. The same amount of soil was used in each column (1,055 mg), but the height of the column varied according to the organic amendment and its proportion, which modified the apparent density of the soil (1,328±0,05 g•cm-3). The height of each column varied from 20 cm for the soil without amendment to 38,33±0,8 cm for the soil with 3% Lemna. After three months, the soil was treated with water (using the equivalent of the problem area infiltration rate), and was divided into three sections (7, 7 and 6 cm length). The soil from each section was air dried, sieved and its cationic exchange capacity, pH, cation solutions and extractable cations were measured to estimate RAS and PSI. An equivalent portion of each section was collected to compose a 50 g soil sample, and baseline respiration rate and tomato seedlings growth were recorded. Statistical differences (p<0,05) were observed among treatments for the variables under evaluation. Tukey test showed no differences among the proportions of organic amendments nor with the addition of gypsum phosphate to the organic amendments. The amendment which showed the lowest bioremediation potential was the Lemna, as a result of its high Na+ concentration. Under the conditions of this study, the soil column methodology used showed limitations to evaluate bioremediation because the control soil column, after being rinsed with water, also showed improvements as CE, RAS and PSI values were reduced. For some variables, the improvement noted in the control soil column surpassed those obtained with the soil amended with Lemna. Based on the best crop response amendment was vermicompost 3%.

Column Generation Algorithms for Nonlinear Optimization II: Numerical Investigations

García et al. present a class of column generation (CG) algorithms for nonlinear programs. Its main motivation from a theoretical viewpoint is that under some circumstances, finite convergence can be achieved, in much the same way as for the classic simplicial decomposition method; the main practical motivation is that within the class there are certain nonlinear column generation problems that can accelerate the convergence of a solution approach which generates a sequence of feasible points. This algorithm can, for example, accelerate simplicial decomposition schemes by making the subproblems nonlinear. This paper complements the theoretical study on the asymptotic and finite convergence of these methods given in [1] with an experimental study focused on their computational efficiency. Three types of numerical experiments are conducted. The first group of test problems has been designed to study the parameters involved in these methods. The second group has been designed to investigate the role and the computation of the prolongation of the generated columns to the relative boundary. The last one has been designed to carry out a more complete investigation of the difference in computational efficiency between linear and nonlinear column generation approaches. In order to carry out this investigation, we consider two types of test problems: the first one is the nonlinear, capacitated single-commodity network flow problem of which several large-scale instances with varied degrees of nonlinearity and total capacity are constructed and investigated, and the second one is a combined traffic assignment model