Large-Size AlGaN/GaN HEMT Large-Signal Electrothermal Characterization and Modeling for Wireless Digital Communications

The rapid growth in high data rate communication systems has introduced new high spectral efficient modulation techniques and standards such as LTE-A (long term evolution-advanced) for 4G (4th generation) systems. These techniques have provided a broader bandwidth but introduced high peak-to-average power ratio (PAR) problem at the high power amplifier (HPA) level of the communication system base transceiver station (BTS). To avoid spectral spreading due to high PAR, stringent requirement on linearity is needed which brings the HPA to operate at large back-off power at the expense of power efficiency. Consequently, high power devices are fundamental in HPAs for high linearity and efficiency. Recent development in wide bandgap power devices, in particular AlGaN/GaN HEMT, has offered higher power level with superior linearity-efficiency trade-off in microwaves communication. For cost-effective HPA design to production cycle, rigorous computer aided design (CAD) AlGaN/GaN HEMT models are essential to reflect real response with increasing power level and channel temperature. Therefore, large-size AlGaN/GaN HEMT large-signal electrothermal modeling procedure is proposed. The HEMT structure analysis, characterization, data processing, model extraction and model implementation phases have been covered in this thesis including trapping and self-heating dispersion accounting for nonlinear drain current collapse. The small-signal model is extracted using the 22-element modeling procedure developed in our department. The intrinsic large-signal model is deeply investigated in conjunction with linearity prediction. The accuracy of the nonlinear drain current has been enhanced through several issues such as trapping and self-heating characterization. Also, the HEMT structure thermal profile has been investigated and corresponding thermal resistance has been extracted through thermal simulation and chuck-controlled temperature pulsed I(V) and static DC measurements. Higher-order equivalent thermal model is extracted and implemented in the HEMT large-signal model to accurately estimate instantaneous channel temperature. Moreover, trapping and self-heating transients has been characterized through transient measurements. The obtained time constants are represented by equivalent sub-circuits and integrated in the nonlinear drain current implementation to account for complex communication signals dynamic prediction. The obtained verification of this table-based large-size large-signal electrothermal model implementation has illustrated high accuracy in terms of output power, gain, efficiency and nonlinearity prediction with respect to standard large-signal test signals.

Resource use pattern and agroecosystem functioning in Rawanganga micro-watershed in Garhwal Himalaya, India

Agro-ecological resource use pattern in a traditional hill agricultural watershed in Garhwal Himalaya was analysed along an altitudinal transect. Thirty one food crops were found, although only 0.5% agriculture land is under irrigation in the area. Fifteen different tree species within agroforestry systems were located and their density varied from 30-90 trees/ha. Grain yield, fodder from agroforest trees and crop residue were observed to be highest between 1200 and 1600 m a.s.l. Also the annual energy input- output ratio per hectare was highest between 1200 and 1600 m a.s.l. (1.46). This higher input- output ratio between 1200-1600 m a.s.l. was attributed to the fact that green fodder, obtained from agroforestry trees, was considered as farm produce. The energy budget across altitudinal zones revealed 95% contribution of the farmyard manure and the maximum output was in terms of either crop residue (35%) or fodder (55%) from the agroforestry component. Presently on average 23%, 29% and 41% cattle were dependent on stall feeding in villages located at higher, lower and middle altitudes respectively. Similarly, fuel wood consumption was greatly influenced by altitude and family size. The efficiency and sustainability of the hill agroecosystem can be restored by strengthening of the agroforestry component. The approach will be appreciated by the local communities and will readily find their acceptance and can ensure their effective participation in the programme.

Alternative plant protein sources for pigs and chickens in the tropics – nutritional value and constraints: a review

In the tropics, a large number of smallholder farms contribute significantly to food security by raising pigs and poultry for domestic consumption and for sale on local markets. The high cost and, sometimes, the lack of availability of commercial protein supplements is one of the main limitations to efficient animal production by smallholders. Locally-grown forages and grain legumes offer ecological benefits such as nitrogen fixation, soil improvement, and erosion control which contribute to improve cropping efficiency. Besides these agronomical assets, they can be used as animal feeds in mixed farming systems. In this paper we review options to include locally-grown forages and grain legumes as alternative protein sources in the diets of pigs and poultry in order to reduce farmers’ dependence on externally-purchased protein concentrates. The potential nutritive value of a wide range of forages and grain legumes is presented and discussed. The influence of dietary fibre and plant secondary metabolites contents and their antinutritive consequences on feed intake, digestive processes and animal performances are considered according to the varying composition in those compounds of the different plant species and cultivars covered in this review. Finally, methods to overcome the antinutritive attributes of the plant secondary metabolites using heat, chemical or biological treatment are reviewed regarding their efficiency and their suitability in low input farming systems.

Wastewater usage in urban and peri-urban agricultural production systems: scenarios from India

The role urban and peri-urban agriculture (UPA) plays in reducing urban poverty and ensuring environmental sustainability was recognized by the Millennium Development Goals (MGDs). India is the world’s largest democratic nation with a population of 1.2 billion. The rapid urbanization and high proportion of people below the poverty line along with higher migration to urban areas make India vulnerable to food crisis and urbanization of poverty. Ensuring jobs and food security among urban poor is a major challenge in India. The role of UPA can be well explained and understood in this context. This paper focuses on the current situation of UPA production in India with special attention to wastewater irrigation. This question is being posed about the various human health risks from wastewater irrigation which are faced by farmers and labourers, and, secondly by consumers. The possible health hazards involve microbial pathogens as well as helminth (intestinal parasites). Based on primary and secondary data, this paper attempts to confirm that UPA is one of the best options to address increasing urban food demand and can serve to complement rural supply chains and reduce ecological food prints in India. “Good practice urban and peri-urban agriculture” necessitates an integrated approach with suitable risk reduction mechanisms to improve the efficiency and safety of UPA production.

Nitrogen and carbon dynamics in grassland soils and plants after application of digestate

A better understanding of effects after digestate application on plant community, soil microbial community as well as nutrient and carbon dynamics is crucial for a sustainable grassland management and the prevention of species and functional diversity loss. The specific research objectives of the thesis were: (i) to investigate effects after digestate application on grass species and soil microbial community, especially focussing on nitrogen dynamic in the plant-soil system and to examine the suitability of the digestate from the “integrated generation of solid fuel and biogas from biomass” (IFBB) system as fertilizer (Chapter 3). (ii) to investigate the relationship between plant community and functionality of soil microbial community of extensively managed meadows, taking into account temporal variations during the vegetation period and abiotic soil conditions (Chapter 4). (iii) to investigate the suitability of IFBB-concept implementation as grassland conservation measure for meadows and possible associated effects of IFBB digestate application on plant and soil microbial community as well as soil microbial substrate utilization and catabolic evenness (Chapter 5). Taken together the results indicate that the digestate generated during the IFBB process stands out from digestates of conventional whole crop digestion on the basis of higher nitrogen use efficiency and that it is useful for increasing harvestable biomass and the nitrogen content of the biomass, especially of L. perenne, which is a common species of intensively used grasslands. Further, a medium application rate of IFBB digestate (50% of nitrogen removed with harvested biomass, corresponding to 30 50 kg N ha-1 a-1) may be a possibility for conservation management of different meadows without changing the functional above- and belowground characteristic of the grasslands, thereby offering an ecologically worthwhile alternative to mulching. Overall, the soil microbial biomass and catabolic performance under planted soil was marginally affected by digestate application but rather by soil properties and partly by grassland species and legume occurrence. The investigated extensively managed meadows revealed a high soil catabolic evenness, which was resilient to medium IFBB application rate after a three-year period of application.

Temperature and moist-stability effects on midlatitude orographic precipitation

Idealized, convection-resolving simulations of moist orographic flows are conducted to investigate the influence of temperature and moist stability on the drying ratio (DR), defined as the fraction of the impinging water mass removed as orographic precipitation. In flow past a long ridge, where most of the air rises over the barrier rather than detouring around it, DR decreases as the surface temperature (Ts) increases, even as the orographic cap cloud becomes statically unstable at higher Ts and develops embedded convection. This behaviour is explained by a few physical principles: (1) the Clausius–Clapeyron equation dictates that the normalized condensation rate decreases as the flow gets warmer, (2) the replacement of ice-phase precipitation growth with warm-rain processes decreases the efficiency by which condensate is converted to precipitation, thereby lowering precipitation efficiency, and (3) embedded convection acts more to vertically redistribute moisture than to enhance precipitation. Over an isolated mountain, the effects of (1) and (2) are counteracted by moisture deflection around the barrier, which is stronger in the colder, more stable flows.

Examining the technical efficiency of rice producers in Bangladesh

Despite record national output in the early years of this decade there is widespread concern that rice yields in Bangladesh are below those attainable, and that given future population growth this may constrain achievement of food security and poverty reduction objectives. A frequent response to this problem is that farmers could close the gap between actual farm yields and potential yields identified in field trials if farmers who are technically inefficient could improve their current farming practices. This paper estimates and explains technical efficiency for a sample of rice farmers in Bangladesh employing Bayesian methods. The results provide insights into the distribution of technical efficiency and identify important influences on rice growing.

Heterotic and seed rate effects on nitrogen efficiencies in wheat

Four field experiments over 2 years investigated whether wheat hybrids had higher nitrogen-use efficiency (NUE) than their parents over a range of seed rates and different N regimes. There was little heterosis for total N in the above-ground biomass (NYt), but there was high-parent heterosis for grain N yields (NYg) in two of the hybrids, Hyno Esta and Hyno Rista, associated with greater nitrogen harvest index (NHI). Overall, the hybrids did not significantly increase the total dry matter produced per unit N in the above-ground crop (NUtE(t)), but did increase the grain dry matter per unit N in the above ground crop (NUtE(g)). The improvement in NUtE(g) was at the partial detriment of grain N concentration. Heterosis for grain NYg in Hyno Esta was lower at zero-N, suggesting that it did not achieve higher yields through more efficient capture or utilization of N. The greater NHI in Hyno Esta appeared to be facilitated by both greater N uptake, and remobilization of N from vegetative tissues, after anthesis. The response of N efficiency and uptake to seed rate was dependent on N supply and season. Where N fertilizer was applied, N uptake over time was slower at the lower seed rates, but where N was withheld N capture at the lowest seed rate soon approached the N capture of the higher seed rates. During grain filling, the rate of accumulation of N into the grain increased with seed rate and the duration of N accumulation decreased with seed rate. With N applied, N yields increased to all asymptote with seed rate, when N was withheld there was little response of N yields to seed rate. In 2002, N utilization efficiency (NUtE(t) and NUtE(g)) also increased asymptotically with seed rate, but in 2003 seed rate had little effect on N utilization efficiency. When nitrogen fertilizer had not been applied, NHI consistently decreased with increasing seed rate. The timing of N application made little difference to NUE, NY, or NUtE.

Production and metabolic effects of site of starch digestion in lactating dairy cattle

Milk solids yield in modern dairy cows has increased linearly over the last 50 years, stressing the need for maximal dietary energy intake to allow genetic potential for milk energy yield to be realized with minimal negative effects on health and reproduction. Feeding supplemental starch is a common approach for increasing the energy density of the ration and supplying carbon for meeting the substantial glucose requirement of the higher yielding cow. In this regard, it is a long held belief that feeding starch in forms that increase digestion in the small intestine and glucose absorption will benefit the cow in terms of energetic efficiency and production response, but data supporting this dogma are equivocal. This review will consider the impact of supplemental starch and site of starch digestion on metabolic and production responses of lactating dairy cows, including effects on feed intake, milk yield and composition, nutrient partitioning, the capacity of the small intestine for starch digestion, and nutrient absorption and metabolism by the splanchnic tissues (the portal-drained viscera and liver). Whilst there appears to be considerable capacity for starch digestion and glucose absorption in the lactating dairy cow, numerous strategic studies implementing postruminal starch or glucose infusions have observed increases in milk yield, but decreased milk fat concentration such that there is little effect on milk energy yield, even in early lactation. Measurements of energy balance confirm that the majority of the supplemental energy arising from postruminal starch digestion is used with high efficiency to support body adipose and protein retention, even in early lactation. These responses may be mediated by changes in insulin status, and be beneficial to the cow in terms of reproductive success and well-being. However, shifting starch digestion from the rumen impacts the nitrogen economy of the cow as well by shifting the microbial protein gained from starch digestion from potentially absorbable protein to endogenous faecal loss.

Terrestrial carnivores and human food production: impact and management

1. The production of food for human consumption has led to an historical and global conflict with terrestrial carnivores, which in turn has resulted in the extinction or extirpation of many species, although some have benefited. At present, carnivores affect food production by: (i) killing human producers; killing and/or eating (ii) fish/shellfish; (iii) game/wildfowl; (iv) livestock; (v) damaging crops; (vi) transmitting diseases; and (vii) through trophic interactions with other species in agricultural landscapes. Conversely, carnivores can themselves be a source of dietary protein (bushmeat). 2. Globally, the major areas of conflict are predation on livestock and the transmission of rabies. At a broad scale, livestock predation is a customary problem where predators are present and has been quantified for a broad range of carnivore species, although the veracity of these estimates is equivocal. Typically, but not always, losses are small relative to the numbers held, but can be a significant proportion of total livestock mortality. Losses experienced by producers are often highly variable, indicating that factors such as husbandry practices and predator behaviour may significantly affect the relative vulnerability of properties in the wider landscape. Within livestock herds, juvenile animals are particularly vulnerable. 3. Proactive and reactive culling are widely practised as a means to limit predation on livestock and game. Historic changes in species' distributions and abundance illustrate that culling programmes can be very effective at reducing predator density, although such substantive impacts are generally considered undesirable for native predators. However, despite their prevalence, the effectiveness, efficiency and the benefit:cost ratio of culling programmes have been poorly studied. 4. A wide range of non-lethal methods to limit predation has been studied. However, many of these have their practical limitations and are unlikely to be widely applicable. 5. Lethal approaches are likely to dominate the management of terrestrial carnivores for the foreseeable future, but animal welfare considerations are increasingly likely to influence management strategies. The adoption of non-lethal approaches will depend upon proof of their effectiveness and the willingness of stakeholders to implement them, and, in some cases, appropriate licensing and legislation. 6. Overall, it is apparent that we still understand relatively little about the importance of factors affecting predation on livestock and how to manage this conflict effectively. We consider the following avenues of research to be essential: (i) quantified assessments of the loss of viable livestock; (ii) landscape-level studies of contiguous properties to quantify losses associated with variables such as different husbandry practices; (iii) replicated experimental manipulations to identify the relative benefit of particular management practices, incorporating (iv) techniques to identify individual predators killing stock; and (v) economic analyses of different management approaches to quantify optimal production strategies.

Efficient and cost-effective experimental determination of kinetic constants and data: the success of a Bayesian systematic approach to drug transport, receptor binding, continuous culture and cell transport kinetics

Details about the parameters of kinetic systems are crucial for progress in both medical and industrial research, including drug development, clinical diagnosis and biotechnology applications. Such details must be collected by a series of kinetic experiments and investigations. The correct design of the experiment is essential to collecting data suitable for analysis, modelling and deriving the correct information. We have developed a systematic and iterative Bayesian method and sets of rules for the design of enzyme kinetic experiments. Our method selects the optimum design to collect data suitable for accurate modelling and analysis and minimises the error in the parameters estimated. The rules select features of the design such as the substrate range and the number of measurements. We show here that this method can be directly applied to the study of other important kinetic systems, including drug transport, receptor binding, microbial culture and cell transport kinetics. It is possible to reduce the errors in the estimated parameters and, most importantly, increase the efficiency and cost-effectiveness by reducing the necessary amount of experiments and data points measured. (C) 2003 Federation of European Biochemical Societies. Published by Elsevier B.V. All rights reserved.

Innovation care pathways and the healthcare built environment: An explanatory framework and research agenda

The built environment in which health and social care is delivered can have an impact on the efficiency and outcomes of care processes. The health-care estate is large and growing and is expensive to build, adapt and maintain. The design of these buildings is a complex, difficult and political process. Better use of care pathways as an input to the design and use of the built environment has the potential to deliver significant benefits. A number of variations on the idea of care pathways are already used in designing health-care buildings but this is under-researched. This paper provides a framework for thinking about care pathways and the health-care built environment. The framework distinguishes between five different pathway ‘types’ defined for the purpose of understanding the relationship between pathways and infrastructure. The five types are: ‘care pathways’, ‘integrated care pathways’, ‘patient pathways’, ‘patient journeys’ and ‘patient flows’. The built environment implications of each type are discussed and recommendations made for those involved in either building development or care pathway projects.

Care pathways and designing the healthcare built environment: an explanatory framework

The built environment in which health and social care is delivered can have an impact on the efficiency and outcomes of care processes. The health-care estate is large and growing and is expensive to build, adapt and maintain. The design of these buildings is a complex, difficult and political process. Better use of care pathways as an input to the design and use of the built environment has the potential to deliver significant benefits. A number of variations on the idea of care pathways are already used in designing health-care buildings but this is under-researched. This paper provides a framework for thinking about care pathways and the health-care built environment. The framework distinguishes between five different pathway ‘types’ defined for the purpose of understanding the relationship between pathways and infrastructure. The five types are: ‘care pathways’, ‘integrated care pathways’, ‘patient pathways’, ‘patient journeys’ and ‘patient flows’. The built environment implications of each type are discussed and recommendations made for those involved in either building development or care pathway projects.

Life cycle GHG assessment of fossil fuel power plants with carbon capture and storage

The evaluation of life cycle greenhouse gas emissions from power generation with carbon capture and storage (CCS) is a critical factor in energy and policy analysis. The current paper examines life cycle emissions from three types of fossil-fuel-based power plants, namely supercritical pulverized coal (super-PC), natural gas combined cycle (NGCC) and integrated gasification combined cycle (IGCC), with and without CCS. Results show that, for a 90% CO2 capture efficiency, life cycle GHG emissions are reduced by 75-84% depending on what technology is used. With GHG emissions less than 170 g/kWh, IGCC technology is found to be favorable to NGCC with CCS. Sensitivity analysis reveals that, for coal power plants, varying the CO2 capture efficiency and the coal transport distance has a more pronounced effect on life cycle GHG emissions than changing the length of CO2 transport pipeline. Finally, it is concluded from the current study that while the global warming potential is reduced when MEA-based CO2 capture is employed, the increase in other air pollutants such as NOx and NH3 leads to higher eutrophication and acidification potentials.