Targetless image-based method for measuring displacements and strains on concrete surfaces with a consumer camera

Measurement of concrete strain through non-invasive methods is of great importance in civil engineering and structural analysis. Traditional methods use laser speckle and high quality cameras that may result too expensive for many applications. Here we present a method for measuring concrete deformations with a standard reflex camera and image processing for tracking objects in the concretes surface. Two different approaches are presented here. In the first one, on-purpose objects are drawn on the surface, while on the second one we track small defects on the surface due to air bubbles in the hardening process. The method has been tested on a concrete sample under several loading/unloading cycles. A stop-motion sequence of the process has been captured and analyzed. Results have been successfully compared with the values given by a strain gauge. Accuracy of our methods in tracking objects is below 8 μm, in the order of more expensive commercial devices.

On the behavior of the Pt(1 0 0) and vicinal surfaces in alkaline media

We address in this paper a voltammetric study of the charge transfer processes characteristic of Pt(1 0 0) and vicinal surfaces in alkaline media. The electrochemical behavior of a series of stepped surfaces of the type Pt(S)[n(1 0 0) × (1 1 1)] has been characterized using cyclic voltammetry at different pHs, charge displacement measurements and FTIR experiments for adsorbed CO. The results from these techniques allow assigning the different peaks appearing in the voltammogram to hydrogen and/or OH adsorption on the different sites of these surfaces, namely, terrace and step sites. Additionally, the potential of zero total charge (pztc) of the electrodes was determined. The resulting pztc values shift to more negative values when the step density increases on the surface up to n = 5. FTIR spectroscopy experiments have been used to monitor the adsorption of CO on the different surfaces as well as the consequent CO oxidation, accompanying a positive potential sweep. The oxidation of adsorbed CO on (1 0 0) terraces is catalyzed by the presence of the (1 1 1) steps. The FTIR spectra revealed that CO is mostly bonded in bridge configuration at low potentials interconverting to on-top when the electrode potential is increased.

Optimized CUDA-Based PDE Solver for Reaction Diffusion Systems on Arbitrary Surfaces

Partial differential equation (PDE) solvers are commonly employed to study and characterize the parameter space for reaction-diffusion (RD) systems while investigating biological pattern formation. Increasingly, biologists wish to perform such studies with arbitrary surfaces representing ‘real’ 3D geometries for better insights. In this paper, we present a highly optimized CUDA-based solver for RD equations on triangulated meshes in 3D. We demonstrate our solver using a chemotactic model that can be used to study snakeskin pigmentation, for example. We employ a finite element based approach to perform explicit Euler time integrations. We compare our approach to a naive GPU implementation and provide an in-depth performance analysis, demonstrating the significant speedup afforded by our optimizations. The optimization strategies that we exploit could be generalized to other mesh based processing applications with PDE simulations.

Bifurcation Analysis of Reaction Diffusion Systems on Arbitrary Surfaces

In this article we present a computational framework for isolating spatial patterns arising in the steady states of reaction-diffusion systems. Such systems have been used to model many different phenomena in areas such as developmental and cancer biology, cell motility and material science. Often one is interested in identifying parameters which will lead to a particular pattern. To attempt to answer this, we compute eigenpairs of the Laplacian on a variety of domains and use linear stability analysis to determine parameter values for the system that will lead to spatially inhomogeneous steady states whose patterns correspond to particular eigenfunctions. This method has previously been used on domains and surfaces where the eigenvalues and eigenfunctions are found analytically in closed form. Our contribution to this methodology is that we numerically compute eigenpairs on arbitrary domains and surfaces. Here we present various examples and demonstrate that mode isolation is straightforward especially for low eigenvalues. Additionally we see that if two or more eigenvalues are in a permissible range then the inhomogeneous steady state can be a linear combination of the respective eigenfunctions. Finally we show an example which suggests that pattern formation is robust on similar surfaces in cases that the surface either has or does not have a boundary.

Use of space by domestic chicks housed in complex aviaries.

To improve the understanding of the development of locomotor capacity in layer hens, we measured how female laying hen chicks (n=120) of four different strains (LSL-lite, Hyline Brown, Dekalb White, Lohmann Brown; 3 groups of 10 chicks per line) utilized the ground, the air, elevated horizontal (platforms and perches) and inclined surfaces (ramps and ladders) in an aviary until 9 weeks of age. We used infra-red video recordings to perform all-occurrences sampling of locomotive behavioural and perching events that occurred on the ground—where bedding material, food and water were provided, in the air, and on elevated horizontal and inclined surfaces within weekly 30-min sampling periods. Chicks preferred level ground during the first week of life compared to weeks 5–9 (P<0.0001) and performed 52% of all behavioural events in this section. Elevated surface use began at 2 weeks of age and increased over time (P=0.003), where most behaviour was performed in S2 (45% of all events). Chicks preferred horizontal to inclined surfaces, which were used from weeks 2–5 with maximum use occurring during weeks 2 and 3. Lohmann LSL chicks used the space above the ground most frequently (P=0.05) and performed more aerial ascent/descent behaviour than other lines (P<0.0001). Overall activity levels declined with age (P<0.0001). In summary layer chicks almost exclusively locomoted on the ground but utilized elevated horizontal surfaces (perch, first platform) as early as 2 weeks. These results provide information for improving space use in rearing aviaries by introducing lower perches, platforms and ramps/ladders to accommodate age-dependent locomotor abilities.

(Table 2) Chemical composition of upper and lower surfaces of Fe-Mn nodules from the Eastern Subequatorial Pacific

Materials of polygon exploration during Cruise 41 of R/V Dmitry Mendeleev showed that diagenetic and sedimentary-diagenetic nodules close in morphology, texture, and composition vary greatly in size and productivity. Local variations in productivity of this nodule type in pelagic areas of the Pacific Ocean are closely connected with thickness of underlying clayey-radiolarian oozes.

An evaluation of detectable warning surfaces for sidewalk curb ramps. Final report.

Virginia Department of Transportation, Richmond

Detectable warning surfaces: color, contrast, and reflectance.

Federal Transit Administration, Washington, D.C.

Effects of dissolved gas evolution at the surfaces of heated vertical cylinders /

Originally presented as the author's thesis at Columbia University.

Physical chemistry of virus adsorption and degradation on inorganic surfaces: its relation to wastewater treatment /

Mode of access: Internet.