Technical criteria for the design of foundation slabs and perimetral wall in difficult terrain in south east Madrid, Spain

This paper explains a procedure for the choice of ballast modules used for the design of direct continuous foundation in karst terrain. The presence of dangerous cavities is introduced in this procedure thereby evaluating risk failure. It also provides pertinent guidelines to direct the geotechnical survey of the terrain.

Impedance-based stability and transient-performance assessment applying maximum peak criteria

The impedance-based stability-assessment method has turned out to be a very effective tool and its usage is rapidly growing in different applications ranging from the conventional interconnected dc/dc systems to the grid-connected renewable energy systems. The results are sometime given as a certain forbidden region in the complex plane out of which the impedance ratio--known as minor-loop gain--shall stay for ensuring robust stability. This letter discusses the circle-like forbidden region occupying minimum area in the complex plane, defined by applying maximum peak criteria, which is well-known theory in control engineering. The investigation shows that the circle-like forbidden region will ensure robust stability only if the impedance-based minor-loop gain is determined at the very input or output of each subsystem within the interconnected system. Experimental evidence is provided based on a small-scale dc/dc distributed system.

Study for the rehabilitation of vernacular architecture with sustainable criteria

This paper assesses rural vernacular heritage established in a warm temperate climate, with dry, hot summer, in São Vicente e Ventosa (SVV), Alentejo, Portugal, and takes part in a larger investigation intending to create rehabilitation guidelines, with sustainable criteria and integration of recent technologies, to improving indoor comfort, and revert the state of deterioration. To further reach this aim, this paper proposes a four phases methodology: data collection, evaluation, simulation and development; a first survey data analysis, including climate data and the adapted comfort climograph and isopleth diagram, allows an understanding of thermal comfort and main constraints in site, as well as suitable bioclimatic strategies for SVV: high thermal inertia for tempering extreme summer conditions and the considerable temperature amplitudes throughout the year, complementarily night ventilation for passive cooling, small-sized window openings and movable shading systems for solar radiation protection. An efficient behaviour in stabilizing indoor temperature swings is revealed.

Explicit Expressions for Solar Panel Equivalent Circuit Parameters Based on Analytical Formulation and the Lambert W-Function

Due to the high dependence of photovoltaic energy efficiency on environmental conditions (temperature, irradiation...), it is quite important to perform some analysis focusing on the characteristics of photovoltaic devices in order to optimize energy production, even for small-scale users. The use of equivalent circuits is the preferred option to analyze solar cells/panels performance. However, the aforementioned small-scale users rarely have the equipment or expertise to perform large testing/calculation campaigns, the only information available for them being the manufacturer datasheet. The solution to this problem is the development of new and simple methods to define equivalent circuits able to reproduce the behavior of the panel for any working condition, from a very small amount of information. In the present work a direct and completely explicit method to extract solar cell parameters from the manufacturer datasheet is presented and tested. This method is based on analytical formulation which includes the use of the Lambert W-function to turn the series resistor equation explicit. The presented method is used to analyze commercial solar panel performance (i.e., the current-voltage–I-V–curve) at different levels of irradiation and temperature. The analysis performed is based only on the information included in the manufacturer’s datasheet.

Explicit expressions for solar panel equivalent circuit parameters based on analytical formulation and the Lambert W - Function

Due to the high dependence of photovoltaic energy efficiency on environmental conditions (temperature, irradiation...), it is quite important to perform some analysis focusing on the characteristics of photovoltaic devices in order to optimize energy production, even for small-scale users. The use of equivalent circuits is the preferred option to analyze solar cells/panels performance. However, the aforementioned small-scale users rarely have the equipment or expertise to perform large testing/calculation campaigns, the only information available for them being the manufacturer datasheet. The solution to this problem is the development of new and simple methods to define equivalent circuits able to reproduce the behavior of the panel for any working condition, from a very small amount of information. In the present work a direct and completely explicit method to extract solar cell parameters from the manufacturer datasheet is presented and tested. This method is based on analytical formulation which includes the use of the Lambert W-function to turn the series resistor equation explicit. The presented method is used to analyze the performance (i.e., the I - V curve) of a commercial solar panel at different levels of irradiation and temperature. The analysis performed is based only on the information included in the manufacturer's datasheet.

La cabaña moderna. Microrrelatos de arquitecturas en busca de sentido

Desde la revolución ilustrada e industrial de finales del s. XVIII se ha venido desarrollando, con fuerza inigualada a lo largo de la historia, algo que es consustancial al hombre y que le ha permitido constituirse como tal frente al resto de animales: la técnica. Como sentencia Ortega, no hay hombre sin técnica. Pero, al mismo tiempo, va quedando cada vez más claro -como también nos señala Ortega- que el sentido y la causa de la técnica están fuera de ella, y que la técnica no es en rigor lo primero, sino que su finalidad le ha de ser prefijada por un deseo original pre-técnico. Si esto no fuera así el hombre perdería su propio sentido, pues el hombre es puro afán, un ente cuyo ser consiste no en lo que ya es, sino en la que aún no es. Sin embargo, el progresivo desencantamiento del mundo como consecuencia del desarrollo de la sociedad industrial vino a sustituir los viejos mitos por una interpretación racional y abstracta que renunciaba a cualquier búsqueda de sentido que trascendiese los hechos brutos. De este modo, la perdida de sentido del hombre frente a la técnica desarrollada por él mismo le dejaba desnortado y convertido en un sujeto pasivo en manos de un malentendido progreso. Frente a esta pérdida de sentido detectada ya a principios del siglo XX y denunciada con más fuerza a partir de la Segunda Guerra Mundial, el postmodernismo del último tramo del pasado siglo pudo no sólo oficializar su desaparición, sino consignar su deslegitimación. Ante a esto, sostenemos la necesaria existencia de sentido en cualquier arquitectura que se desarrolle plenamente y, especialmente, en la arquitectura de la modernidad -y aún de la modernidad tardía o postmodernidad- muchas de las veces no explicitado como tal frente al sobredimensionamiento técnico que ha venido marcando la pauta desde la revolución industrial. Al mismo tiempo, ya no se puede hablar de un único sentido, universalizable, sino de una pluralidad de sentidos que definirán distintas arquitecturas. Partiendo de la petitio principii de que el tema capital de la arquitectura en la modernidad ha sido la vivienda, el objeto arquitectónico que reúne las mejores características para desarrollar esta búsqueda de sentido lo hemos encontrado en la cabaña moderna, donde se cumple el aforismo corbusierano que señala que “quand l’économie est au maximum, l’intensité est au maximum”. Al mismo tiempo “al representar la plenitud a través de su misma negación”, la cabaña moderna se puede entender como una sublimación de la arquitectura a través de pequeños objetos donde han quedado destiladas las distintas esencias de la modernidad. Mediante el análisis de seis pequeñas construcciones situadas en archipiélagos arquitectónicos radicalmente distantes –el campamento de Ocatillo (F. Ll. Wright, 1929); la Caja (R. Erskine, 1942); el Cabanon (Le Corbusier, 1952); la casa cúpula en Carbondale (R. B. Fuller, 1960); el refugio en Oropesa (F. J. Sáenz de Oíza, c.1967-1977) y el pabellón de invitados en Kempsey (G. Murcutt, 1992)- la aparente aporía que supone la cabaña moderna, frente a la más lógica, en principio, cabaña primitiva, cobra sentido. Efectiva mente, el referente mítico de la cabaña primitiva, tal y como fue enunciado por Laugier, se correspondía con el estadio más primitivo de la modernidad, con sus orígenes, precisamente porque la crítica que se hacía en ella de la arquitectura se basaba en criterios exclusivamente técnicos que remitían a los orígenes constructivos de la arquitectura como fórmula para salir del entramado retórico en el que ésta se encontraba perdida. La cabaña moderna trasciende, sin embargo, aquella primitiva fase de la modernidad, de la que la cabaña de Laugier es paradigma, en la medida en que la crítica que se realiza ahora es doble, pues a la crítica de carácter técnico que encontramos en cada una de las cabañas se le añade una crítica de sentido que no se encuentra supeditada, en ninguno de los casos, a la componente técnica, tal y como sin embargo sucedía con Laugier, donde la pretendida regeneración moral de la arquitectura era consecuencia directa de su depuración técnica. En la cabaña moderna, al contrario, encontramos una pluralidad de sentidos que orientan y fuerzan el desarrollo de la techné en direcciones que llegan a ser radicalmente diferentes, construyendo unos relatos que habrán de ser, por tanto, necesariamente parciales, pero de los que la arquitectura, en cualquier caso no podrá prescindir si es que quiere seguir siendo fiel a sí misma, tal y como, efectivamente, lo comprendieron Wright, Erskine, Le Corbusier, Fuller, Sáenz de Oíza y Murcutt, cuando se esforzaron por que estas pequeñas arquitecturas que hemos visitado, tan sólo unas cabañas, fueran unas cabañas con sentido, unas cabañas modernas. ABSTRACT Since the illustrated and industrial revolution of the XVIII century it has been developing, with unequally strength through history, something that is inherent to man and that has allowed him to become himself against the rest of animals: technique. As Ortega says, there is no man without technique. But, at the same time, it is becoming increasingly clear –as Ortega also says- that the sense and the cause of the technique are beyond technique itself, and that technique is not actually the first thing, but that its purpose must be predefined by a pre-technique original desire. If it were not like this, man would lose his own sense, because man is pure desire, an entity whose being is not what already is, but what still doesn’t is. However, the progressive disenchantment of the world as the result of the development of the industrial society came to change the old myths by a rational and abstract interpretation that renounced to any search of meaning that transcended the brute facts. Thereby, the loss of sense of man against the technique developed by man himself let him aimless and converted in a passive object in the hands of a misunderstood progress. Against this loss of sense already detected at the beginning of the XX century and denounced in a stronger way since the Second World War, the postmodernism of the late decades of the last century could not only formalize its disappearance, but also consign its delegitimization. On the contrary, we maintain the necessary existence of sense in any architecture that is fully developed and, specially, in the modern architecture –and even in the late Modernism or Postmodernism- many times not made explicit as such against the technique oversizing that has been setting the pattern since the industrial revolution. At the same time, we can not talk about an only and universal sense, but about a plurality of senses that will define different architectures. On the basis of the petitio principii that dwelling has been the capital issue of modern architecture, the architectonic object that possesses the best features for developing this search of sense has been found in the modern hut, where is fulfil the Corbusieran aphorism that says that “quand l’économie est au maximum, l’intensité est au maximum”. At the same time, “representing plenitude through its own negation” the modern hut can be understood as a sublimation of architecture through small objects where the different essences of modernity have been distilled. Through the analysis of six small buildings located in radically distant architectonic archipelagos –the Ocatillo dessert camp (F. Ll. Wright, 1929); the Box (R. Erskine, 1942); the Cabanon (Le Corbusier, 1952); the dome-home in Carbondale (R. B. Fuller, 1960); the retreat in Oropesa (F. J. Sáenz de Oíza, c. 1967-1977) and the guest house in Kimpsey (G. Murcutt, 1992)- the apparent aporia that represents the modern hut, against the, initially, more logical primitive hut, makes sense. Indeed, the mythical reference of the primitive hut, as it was enunciated by Laugier, belonged to the most primitive state of modernity, with its origins, precisely because the criticism of the architecture that was made there was based in exclusively technique criteria, referring to the constructive origins of architecture as the formula to get out of the rhetoric labyrinth in which architecture was lost at the moment. However, the modern hut transcends that primitive phase of modernity, of which Laugier’s hut is paradigm, since the criticism that is made is double, because to the criticism on the technique that we find in every hut we must add a criticism on the sense that is never subordinated to the technique component, as it was the case in Laugier, where the intended architectonic moral regeneration was a direct consequence of its technical depuration. In the modern hut, on the contrary, we find a plurality of senses that guides and drives the development of techné in radically different directions, building narratives that must be, then, necessarilly partial, but of which architecture could never leave aside if it still wants to be faithful to itself, as Wright, Erskine, Le Corbusier, Fuller, Sáenz de Oíza and Murcutt seemed to understand when they tried hardly to make these small architectures that we have visited, these huts, huts full of sense, modern huts.

Naturaleza, ética, y arquitectura: Autenticidad y criterios éticos que integran el desarrollo de una arquitectura más sostenible = Nature, ethics and architecture: Authenticity and ethics criteria that integrate the development of a more sustainable architecture

La ecología no solamente ha puesto de manifiesto problemas ambientales, sino que ha confirmado la necesidad de una nueva armonía entre los propios seres humanos y de éstos con la naturaleza y con todos los seres que la habitan. Es necesario un nuevo contrato que determine nuestras relaciones con la Naturaleza (Serrs1), y una nueva Ética para nuestras vidas (Guattari2). La ética medioambiental nos ha dado una visión universal y supra-generacional de la gestión de la naturaleza y como consecuencia, una nueva forma de construir nuestra ‘segunda’ Naturaleza, que es la arquitectura. ¿Qué es lo esencial que esta nueva ética exige para la arquitectura? Este es un momento crucial para reconsiderar los objetivos de la arquitectura, porque lo ‘eco’ está produciendo grandes cambios. ¿Implica esta era post-ecológica una particular ética, es decir, referida a sus fines y medios? ¿Porqué, para qué, para quién, cómo debemos hacer la arquitectura de nuestro tiempo? Es momento de afrontar críticamente el discurso de la eco-arquitectura, e incluso de repensar los propios límites de la arquitectura. El desarrollo actual del conocimiento medioambiental es esencialmente técnico y utilitario, pero ¿es el reto solamente técnico?¿Es suficiente la suma de lo medioambiental-social-económico-cultural para definirla? ¿Hay claves que nos puedan dar la dimensión ética de esta aproximación técnica-empírica? ¿Sabemos lo que estamos haciendo cuando aplicamos este conocimiento? Y, sobre todo, ¿cuál es el sentido de lo que estamos haciendo? La tesis que se propone puede resumirse: De acuerdo con el actual conocimiento que tenemos de la Naturaleza, la Arquitectura de nuestro tiempo deber reconsiderar sus fines y medios, puesto que la ética medioambiental está definiendo nuevos objetivos. Para fundamentar y profundizar en esta afirmación la tesis analiza cómo son hoy día las relaciones entre Ética-Naturaleza-Arquitectura (Fig.1), lo que facilitará las claves de cuáles son los criterios éticos (en cuanto a fines y medios) que deben definir la arquitectura del tiempo de la ecología. ABSTRACT Ecology shows us not only environmental problems; it shows that we need a new balance and harmony between individuals, beings, communities and Nature. We need a new contract with Nature according to Serres576, and a new Ethics for our lives according to Guattari577. Environmental ethics have given us a universal and supra-generational vision of the management of our Nature and, as a consequence, a new way to construct our ‘second’ nature, which is architecture. What is essential for this new architecture that the new ethics demand? This is a critical moment to reconsider the object of architecture, because the ‘eco’ is making significant changes in it. Are there any specifically ethical concerns (ends and means) in the post-ecological era? Why, for what, for whom, how should we make architecture in our times? This is the time to approach the eco-architectural discourse critically and to question the current boundaries of architecture itself: Where is eco-architecture going? The current development of environmental knowledge is essentially technical and utilitarian, but it is its technical aspect the only challenge? Is the sum of environmental-social-economic aspects enough to define it? Are there any clues which can give an ethical sense to this technical-empirical approach? Do we know what we are doing when we apply this knowledge? And overall, what is the meaning of what we are doing? Exploring this subject, this thesis makes a statement: In accordance with the actual knowledge of Nature, Architecture of our time must reconsider its ends and means, since the environmental ethics is defining new objectives. To support that, the thesis analyzes what the relationships between Ethics –Nature- Architecture (Fig. 53) are like nowadays, this will provide the clues of which ethical criteria (ends and means) must architecture of an ecological era define.

Desarrollo de una metodología de vigilancia tecnológica para la toma de decisiones : aplicación a las tecnologías multimedia

La aplicación de la vigilancia tecnología se ha mostrado como una de las herramientas más importantes para ganar competitividad y mejorar las actividades de innovación de las empresas. La vigilancia se basa en captar las informaciones, normalmente patentes y publicaciones científicas, más relevantes para un determinado campo tecnológico y valorarlas para influir en la toma de decisiones. Las fases clásicas son: búsqueda, análisis y comunicación de la información. El trabajo se soportará tanto en herramientas comerciales como en otras que deberá desarrollar el estudiante, y tendrá como objetivo fundamental el desarrollar una metodología, basada en la vigilancia, para tomar decisiones sobre tecnologías y en este caso aplicadas a las tecnologías multimedia. El objetivo principal en la propuesta de una metodología genérica de vigilancia tecnológica (VT/IC) para la toma de decisiones con un ejemplo de aplicación en las tecnologías multimedia y que más adelante se explicitó en TV 3D. La necesidad de que el proceso de VT/IC se soporte en una metodología es imprescindible si queremos darle la importancia que debe tener en el ciclo productivo de cualquier tipo de organización y muy especialmente en una organización involucrada en investigación y desarrollo (I+D+i). Esta metodología posibilitará, entre otras cosas, que estos procesos que conforman la VT/IC puedan integrarse en una organización compartiendo los procesos productivos, de administración y de dirección de la organización. Permitirá una medición de su funcionamiento y las posibles modificaciones para obtener un mejor funcionamiento. Proveerá a los posibles elementos involucrados en la VT/IC de la documentación, procesos, herramientas, elementos de medición de un sistema definido, publicado, medido y analizado de trabajo. Finalmente a modo de ejemplo de un proceso de consulta VT/IC utilizaremos el criterio de búsqueda genérico 3D TV propuesto. Estructura del PFC: Para lograr estos objetivos el trabajo ha sido dividido en 6 etapas: 1.- Descripción del PFC: Una presentación del PFC y su desarrollo. 2.- Vigilancia tecnológica: Desarrollo del concepto de VT/IC, los efectos esperados, beneficios y riesgos de la VT/IC, concepto de inteligencia competitiva (IC), concepto aplicado de vigilancia tecnológica e inteligencia competitiva (VT/IC). 3.- Técnicas de análisis empresarial donde la VT/IC es útil: para empezar a entender como debe ser la VT/IC analizamos como una organización utiliza las distintas técnicas de análisis y que información aportan cada una de ellas, finalmente analizamos como la VT/IC ayuda a esas técnicas de análisis. 4.- Gestión de las fuentes de información: análisis de los tipos de fuentes de información y sus herramientas de búsqueda asociadas. 5.- Metodología propuesta de la VT/IC: desarrollo de la metodología de implementación y de funcionamiento de una unidad de VT/IC. 6.- Observatorio: a modo de ejemplo, “3d TV”. ABSTRACT. The application of surveillance technology has proven to be one of the most important to increase competitiveness and improve the innovation activities of enterprises tools. Surveillance is based on capturing the information, usually patents and scientific publications most relevant to a given technological field and assess them to influence decision making. The classical phases are: search, analysis and communication of information. The work will support both commercial and other tools to be developed by the student, and will have as main objective to develop a methodology, based on monitoring to make decisions about technologies and in this case applied to multimedia technologies. The main objective in the proposed generic methodology for technological awareness (VT / IC) for decision making with an example application in multimedia technologies and later made explicit 3D TV. The need for the process of VT / CI support methodology is essential if we give it the importance it should have in the production cycle of any organization and especially in an organization involved in research and development (R + D + i). This methodology will allow, among other things, that these processes that make up the VT / IC can be integrated into an organization sharing production processes, management and direction of the organization. It will allow a measurement of its performance and possible changes for better performance. It will provide the possible elements involved in the VT / IC documentation, processes, tools, measuring elements of a defined system, published, measured and analyzed work. Finally an example of a consultation process VT / IC use generic search criteria proposed 3D TV. Structure of the PFC: To achieve these objectives the work has been divided into 6 stages: 1. PFC Description: A presentation of the PFC and its development. 2. Technology Watch: Concept Development of VT / IC, expected effects, benefits and risks of VT / IC concept of competitive intelligence (CI) concept applied technology watch and competitive intelligence (VT / IC). 3. Business analysis techniques where VT / IC is useful: to begin to understand how it should be the VT / IC analyze how an organization uses different analysis techniques and information provide each finally analyze how the VT / IC helps these analysis techniques. 4. Management information sources: analysis of the types of information sources and their associated search tools. 5. proposed methodology VT / IC: methodology development and operational deployment of a unit of VT / IC. 6. Observatory: by way of example, "3D TV".

Neurite, a finite difference large scale parallel program for the simulation of the electrical signal propagation in neurites under mechanical loading

With the growing body of research on traumatic brain injury and spinal cord injury, computational neuroscience has recently focused its modeling efforts on neuronal functional deficits following mechanical loading. However, in most of these efforts, cell damage is generally only characterized by purely mechanistic criteria, function of quantities such as stress, strain or their corresponding rates. The modeling of functional deficits in neurites as a consequence of macroscopic mechanical insults has been rarely explored. In particular, a quantitative mechanically based model of electrophysiological impairment in neuronal cells has only very recently been proposed (Jerusalem et al., 2013). In this paper, we present the implementation details of Neurite: the finite difference parallel program used in this reference. Following the application of a macroscopic strain at a given strain rate produced by a mechanical insult, Neurite is able to simulate the resulting neuronal electrical signal propagation, and thus the corresponding functional deficits. The simulation of the coupled mechanical and electrophysiological behaviors requires computational expensive calculations that increase in complexity as the network of the simulated cells grows. The solvers implemented in Neurite-explicit and implicit-were therefore parallelized using graphics processing units in order to reduce the burden of the simulation costs of large scale scenarios. Cable Theory and Hodgkin-Huxley models were implemented to account for the electrophysiological passive and active regions of a neurite, respectively, whereas a coupled mechanical model accounting for the neurite mechanical behavior within its surrounding medium was adopted as a link between lectrophysiology and mechanics (Jerusalem et al., 2013). This paper provides the details of the parallel implementation of Neurite, along with three different application examples: a long myelinated axon, a segmented dendritic tree, and a damaged axon. The capabilities of the program to deal with large scale scenarios, segmented neuronal structures, and functional deficits under mechanical loading are specifically highlighted.

La pedagogía del criterio desobediente/Pedagogy of Disobedient Criteria

Artículo de crítica de la arquitectura y la aplicación de ésta a la docencia de proyectos arquitectónicos.

Analytical bearing capacity of strip footing in weightless materials with power-law failure criteria

Sokolovskii’s method of characteristics is extended to provide analytical solutions for the ultimate load at the moment of plastic failure under plane-strain conditions of shallow strip foundations on weightless rigid-plastic media with a noncohesive power-law failure envelope. The formulation is made parametrically in terms of the instantaneous friction angle, and the key idea to obtain the bearing capacity is that information can be transmitted from the free surface (where external loads are known) to the contact plane of the foundation. The methodology can consider foundations adjacent to a slope, external surcharges at the free surface, and inclined loads (both on the slope and on the foundation). Sensitivity analyses illustrate the influence on bearing capacity of changes in the different geometrical parameters involved. An application example is presented and design plots are provided, and model predictions are compared with results of bearing capacity tests under low gravity.

Discrete Multi-Criteria Methods for lands use and conservation planning on La Colacha in Arroyos Menores (Río Cuarto, Province of Córdoba, Argentina)

The study area is La Colacha sub-basins from Arroyos Menores basins, natural areas at West and South of Río Cuarto in Province of Córdoba of Argentina, fertile with loess soils and monsoon temperate climate, but with soil erosions including regressive gullies that degrade them progressively. Cultivated gently since some hundred sixty years, coordinated action planning became necessary to conserve lands while keeping good agro-production. The authors had improved data on soils and on hydrology for the study area, evaluated systems of soil uses and actions to be recommended and applied Decision Support Systems (DSS) tools for that, and were conducted to use discrete multi-criteria models (MCDM) for the more global views about soil conservation and hydraulic management actions and about main types of use of soils. For that they used weighted PROMETHEE, ELECTRE, and AHP methods with a system of criteria grouped as environmental, economic and social, and criteria from their data on effects of criteria. The alternatives resulting offer indication for planning depending somehow on sub basins and on selections of weights, but actions for conservation of soils and water management measures are recommended to conserve the basins conditions, actually sensibly degrading, mainly keeping actual uses of the lands.

Is building renovation truly sustainable? The need for applying a multi-criteria assessment through life cycle approach

The aim of the present research is to characterise the international scene in the field of building refurbishment, by thoroughly reviewing the literature relating to building renovation and systematising the results according to the different aspects considered by the authors. Even though there is certain consensus with respect to the criteria for the selection of energy efficiency measures, the assessment criteria differ broadly and widely. The present work highlights the lack of consensus on the assessment criteria and the need of harmonization. A holistic view is required in order to identify the most sustainable strategies in each particular case, considering social, environmental and economic impacts from a life cycle perspective.

Comparison of implicit and explicit FSI coupling strategies in cardiovascular system = Comparación de las estrategias implícitas y explícitas de acoplamiento FSI en el sistema cardiovascular

Comparación de los esquemas de integración temporal explícito e implícito, en la simulación del flujo sanguíneo y su interacción con la pared arterial. There are two major strategies in FSI coupling techniques: implicit and explicit. The general difference between these methodologies is how many times the data is exchanged between the fluid and solid domains at each FSI time-step. In both coupling strategies, the pressure values coming from fluid domain calculations at each time-step are exported to the solid domain, and consequently, the solid domain is analyzed with these imported forces. In contrast to the explicit coupling, in the implicit approach the fluid and solid domain’s data is exchanged several times until the convergence is achieved. Although this method may boost the numerical stabilization, it increases the computational cost due to the extra data exchanges. In cardiovascular simulations, depending on the analysis objectives, one may choose an explicit or implicit approach. In the current work, the advantage of an explicit coupling strategy is highlighted when simulation of pulsatile blood flow in elastic arteries is desired.

How should the sustainability of the location of dry ports be measured? A proposed methodology using Bayesian networks and multi-criteria decision analysis

The global economic structure, with its decentralized production and the consequent increase in freight traffic all over the world, creates considerable problems and challenges for the freight transport sector. This situation has led shipping to become the most suitable and cheapest way to transport goods. Thus, ports are configured as nodes with critical importance in the logistics supply chain as a link between two transport systems, sea and land. Increase in activity at seaports is producing three undesirable effects: increasing road congestion, lack of open space in port installations and a significant environmental impact on seaports. These adverse effects can be mitigated by moving part of the activity inland. Implementation of dry ports is a possible solution and would also provide an opportunity to strengthen intermodal solutions as part of an integrated and more sustainable transport chain, acting as a link between road and railway networks. In this sense, implementation of dry ports allows the separation of the links of the transport chain, thus facilitating the shortest possible routes for the lowest capacity and most polluting means of transport. Thus, the decision of where to locate a dry port demands a thorough analysis of the whole logistics supply chain, with the objective of transferring the largest volume of goods possible from road to more energy efficient means of transport, like rail or short-sea shipping, that are less harmful to the environment. However, the decision of where to locate a dry port must also ensure the sustainability of the site. Thus, the main goal of this article is to research the variables influencing the sustainability of dry port location and how this sustainability can be evaluated. With this objective, in this paper we present a methodology for assessing the sustainability of locations by the use of Multi-Criteria Decision Analysis (MCDA) and Bayesian Networks (BNs). MCDA is used as a way to establish a scoring, whilst BNs were chosen to eliminate arbitrariness in setting the weightings using a technique that allows us to prioritize each variable according to the relationships established in the set of variables. In order to determine the relationships between all the variables involved in the decision, giving us the importance of each factor and variable, we built a K2 BN algorithm. To obtain the scores of each variable, we used a complete cartography analysed by ArcGIS. Recognising that setting the most appropriate location to place a dry port is a geographical multidisciplinary problem, with significant economic, social and environmental implications, we consider 41 variables (grouped into 17 factors) which respond to this need. As a case of study, the sustainability of all of the 10 existing dry ports in Spain has been evaluated. In this set of logistics platforms, we found that the most important variables for achieving sustainability are those related to environmental protection, so the sustainability of the locations requires a great respect for the natural environment and the urban environment in which they are framed.