Impact of stocking density on growth and survival rate of mud crab (Scylla serrata Froskal)

A 10-weeks culture trial of mud crab, Scylla serrata in brackish water earthen pond was conducted in different stocking densities. The aim of the experiment was to identify a suitable stocking density for optimum production. There were three treatment as 5000 crab lings/ha, 10000 crab lings/ha and 15000 crab lings/ha of each with three replications. The initial mean weight of crab lings were same (5.5 ± 0.13 g). The experimental month was June '95 to August '95. The size of each pond was 500 m². To maintain good water quality water was exchanged in every spring tide. The salinity during the experiment were 2-18ppt. Prepared feed of about 32% protein consisting fish meal, MOC rice bran and wheat flour was used at 5% of their body weight. In terms of production, survival rate, growth and carapace width, the stocking density having 10000/ha showed the best (P

Effect of chloral hydrate on metabolic rate of Labeo rohita (Ham) and Poecilia reticulata (Peters)

Comparative impact of chloral hydrate anaesthesia on the metabolic rate of Indian major carp Labeo rohita and larvivorous fish Poecilia reticulata was assessed. Observation on the Oxygen Consumption Rate (OCR) revealed that in common guppies OCR was substantially low (1.105 and 1.097 mg/g/hr) at 0.1 and 0.25 g/l concentrations of chloral hydrate as against OCR of 1.487 mg/g/hr in the control. Fry of L. rohita in group showed lower metabolic rates in the control as well as treated conditions as compared to the individuals of this fish. This may be due to sympathetic psychophysiological reflex of grouped fish. Higher dose of chloral hydrate (0.25 g/l) also caused higher OCR probably due to distress. Application of chloral hydrate also favoured lesser release of metabolic wastes (ammonia and carbon dioxide). There was significant positive correlation between time and oxygen consumption, whereas, for time and OCR this relationship was negative. Regression of chloral hydrate doses for OCR and time has also been calculated.

Comparative account of growth rate of body parts with total length in adult Puntius sarana (Ham.)

The present study on growth rate of different body parts in relation to total length, in the male and female Puntius sarana (Ham.) did not show any significant heterogeneity except in snout length (p.01). The growth rate of snout length was found to be higher in females (b=0.0377) than in males (b=0.0266). Since the growth rate of most of the body parts was found to be homogeneous in both the sexes, the common regression co-efficient "b" was calculated on pooled data to represent the growth rate of different body parts against total length, the linearity of regression lines indicated isometric growth.

Comparative account of growth rate of body parts with total length in Rita pavimentata (Gunther)

The paper deals with sex-wise growth rate of different body parts in relation to total length in Rita paviinentata (Gunther). Growth rates calculated on pooled data by using the common regression coefficient 'b' reveals isometric and homogeneous nature in sexes.

Solid particle erosion of boronized steels

Boronizing is a thermochemical diffusion-based process for producing iron boride layers in the surface of steel components. The boride layer is wear resistant and is very hard. Large residual stresses are found to exist in the surface layers, which are a function of substrate steel composition and heat treatment. By slow cooling from the boronizing temperature (900°C), a large compressive stress is developed in the boride layer. Hardening the steel by rapid cooling, either directly from the boronizing treatment or after subsequent austenitizing, develops tension in the coating which causes it to fracture. Tempering of the martensite produces compression in the coating, closing but not welding the cracks. The results of solid particle erosion experiments using silicon carbide, quartz, and glass bead erodents on boronized steels are presented.

Transitions in the erosive wear behavior of a glass-ceramic

The mechanisms of material removal were investigated during the erosive wear of a glass-ceramic. The effects of erodent particle shape, velocity and angle were studied. Single impacts and incremental erosion tests were performed, to study the development of surface features and to elucidate the mechanisms of material removal. It was found that transitions in mechanism occurred which depended on the particle shape, impact velocity and impact angle. The mechanisms of material removal, for erosion by silica sand, changed from fine scale fracture and plastic processes below a transition point to large-scale cracking of the surface above. Spherical glass beads caused wear dominated by fatigue, with a very strong dependence of wear rate on the impact conditions. This work indicates that laboratory erosion testing of glass-ceramic and other brittle materials should reflect the conditions present in practice, and that account must be taken of possible changes in wear mechanisms.

The effect of feeding rate on the growth, food conversion and protein efficiency of silver dollar, Metynnis schreitmulleri (AHL), fry

A 30-day experiment was conducted to determine the effects of varying feeding rates on the growth of fry of silver dollar, Metynnis schreitmulleri (Ahl). Silver dollar fry with an average initial body weight of 1.100 ± 0.029 g were collected from a local fish breeder and fed a diet (35% protein and 6% fat) at the rate of 3, 6 and 9% of body weight per day in two equal meals. Per cent weight gain increased from 54.54 to 118.18 with increased feeding rates, which were significantly different (p<0.05) from each other. The highest specific growth rate was obtained in the fry fed at 9% body weight per day. In another study for 30 days, the effects of feeding frequency on growth, feed conversion and protein efficiency of silver dollar fry were evaluated. Groups of silver dollar fry with an initial individual weight of 0.700 ± 0.019 g were offered feed continuously for 24 hours during the day or night at different time intervals with varying meal sizes. The night time feeding with two meals gave the lowest weight and length gains (0.985 g and 0.30 cm). The growth rates of fish fed during day with three equal-sized meals are significantly (p<0.05) higher (4.66%) than the other treatments.

Recent progress in high-bit-rate applications of four-wave-mixing in SOAs

Non-linearities in semiconductor optical amplifiers have been used to demonstrate a wide range of functions applicable to future optical networks such as wavelength conversion and optical switching. Four-wave-mixing effects in SOAs have been studied extensively in many laboratories with respect to the underlying physical processes and system applications. At BT Labs an optimization of SOAs for FWM has been achieved by altering the device active layer composition and by increasing the device length. We will review recent progress at BT Labs in dispersion compensation, wavelength conversion and demultiplexing at bit-rates of 40 Gbit/s using these devices.

Method for determining erosion resistance of fibre-insulating materials

A method was developed for the estimation of the erosive wear of fiber-insulating materials. The wear increases with increasing impact velocity of the particles, increasing impact angle, particle size and the thermal ageing of the fibre elements. Through CFD simulation of the particle-containing gas flow, the erosion depth can be predicted.

Recent progress in high-bit-rate applications of four-wave-mixing in SOAs

Non-linearities in semiconductor optical amplifiers have been used to demonstrate a wide range of functions applicable to future optical networks such as wavelength conversion and optical switching. Four-wave-mixing effects in SOAs have been studied extensively in many laboratories with respect to the underlying physical processes and system applications. At BT Labs an optimisation of SOAs for FWM has been achieved by altering the device active layer composition and by increasing the device length. We will review recent progress at BT Labs in dispersion compensation, wavelength conversion and demultiplexing at bit-rates of 40Gbit/s using these devices.

Studies on the preparation of fish silage. 2. Rate of liquefaction in different parts of silver belly

An experiment was undertaken to determine from which part of silver belly (Leiognathus splendens) carcasses originate the autolytic enzymes responsible for liquefaction of silage. Findings show that it is important to leave head and viscera present in order to get a satisfactory liquefaction in silage prepared from silver belly using 3.5% formic acid. The storage life of silage produced from various parts of the fish carcasses is also discussed.

Growth performance, recovery rate and fish yield of GIFT strain at various water depths under rice-fish culture systems

Effect of water depth on recovery rate, growth performance and fish yield of GIFT in the rice-fish production systems was studies in experimental plots of 123 m2 with a pond refuge of I meter deep which covered 10% of the total land area. Mortality rate of fish was very low ranging from 0.81-1.63%. However, at harvest, recovery rate ranged from 76.69-82.93% with the highest recovery at 11-15 em of water depth. Significantly the highest absolute growth (99.97) and specific growth rate (2.42%) were found at 21-25 cm water depth. The same treatment also produced significantly higher fish yield (909.76 kg/ha) although statistically similar to the fish yield (862.60 kg/ha) obtained at ll-15 em of water depth. Results also suggested that higher water depth can produce bigger fish but no significant effects of water depth was found on fish yield in the treatments 11-15 cm and 21-25 cm water depths of this experiment.

Diel feeding patterns, rate of gastric evacuation and foods of Indian sandwhiting, Sillago sihama in Mulki estuary, west coast of India

Diel feeding chronology of sandwhiting, Sillago sihama was examined from stomach collections taken during the months of April, July and December'99 in Mulki estuary along Dakshina Kannada coast, India. Significant differences in mean stomach content weight were found between several consecutive 3 hour periods with peak fullness occurring in early morning and evening hours. The rate of gastric evacuation of natural food (crustacea, polychaetes and fish) was measured in the field was best described by an exponential model, with an estimated evacuation time of 8.0 h at a temperature of 28.5 ± 1.2°C. Stomach content analysis indicated that this species is a carnivore on a wide range of benthic, epibenthic and planktonic prey. The principal food items of S. sihama were crustaceans, polychaetes and fish. Fishes less than 100 mm TL preferred mainly crustaceans while larger ones depends on polychaetes, crustaceans and fish. The feeding activity of S. sihama was influenced by tidal cycle.