LASER-TESTING RIG : Measurement System for evaluation of Shape of concentrating reflector for solar collector Absolicon X10

This Thesis project is a part of the all-round automation of production of concentrating solar PV/T systems Absolicon X10. ABSOLICON Solar Concentrator AB has been invented and started production of the prospective solar concentrated system Absolicon X10. The aims of this Thesis project are designing, assembling, calibrating and putting in operation the automatic measurement system intended to evaluate the shape of concentrating parabolic reflectors.On the basis of the requirements of the company administration and needs of real production process the operation conditions for the Laser testing rig were formulated. The basic concept to use laser radiation was defined.At the first step, the complex design of the whole system was made and division on the parts was defined. After the preliminary conducted simulations the function and operation conditions of the all parts were formulated.At the next steps, the detailed design of all the parts was conducted. Most components were ordered from respective companies. Some of the mechanical components were made in the workshop of the company. All parts of the Laser-testing rig were assembled and tested. Software part, which controls the Laser-testing rig work, was created on the LabVIEW basis. To tune and test software part the special simulator was designed and assembled.When all parts were assembled in the complete system, the Laser-testing rig was tested, calibrated and tuned.In the workshop of Absolicon AB, the trial measurements were conducted and Laser-testing rig was installed in the production line at the plant in Soleftea.

Using Multi-Objective Optimization To Maximize Multiple Benefits For Sustainable Drainage Design

For many years, drainage design was mainly about providing sufficient network capacity. This traditional approach had been successful with the aid of computer software and technical guidance. However, the drainage design criteria had been evolving due to rapid population growth, urbanisation, climate change and increasing sustainability awareness. Sustainable drainage systems that bring benefits in addition to water management have been recommended as better alternatives to conventional pipes and storages. Although the concepts and good practice guidance had already been communicated to decision makers and public for years, network capacity still remains a key design focus in many circumstances while the additional benefits are generally considered secondary only. Yet, the picture is changing. The industry begins to realise that delivering multiple benefits should be given the top priority while the drainage service can be considered a secondary benefit instead. The shift in focus means the industry has to adapt to new design challenges. New guidance and computer software are needed to assist decision makers. For this purpose, we developed a new decision support system. The system consists of two main components – a multi-criteria evaluation framework for drainage systems and a multi-objective optimisation tool. Users can systematically quantify the performance, life-cycle costs and benefits of different drainage systems using the evaluation framework. The optimisation tool can assist users to determine combinations of design parameters such as the sizes, order and type of drainage components that maximise multiple benefits. In this paper, we will focus on the optimisation component of the decision support framework. The optimisation problem formation, parameters and general configuration will be discussed. We will also look at the sensitivity of individual variables and the benchmark results obtained using common multi-objective optimisation algorithms. The work described here is the output of an EngD project funded by EPSRC and XP Solutions.

Mastocitose na infância : estudo anátomo-patológico e imuno-histoquímico

Introdução A mastocitose abrange um grupo heterogêneo de condições crônicas caracterizado pela proliferação excessiva de mastócitos nos tecidos. Os sinais e sintomas clínicos são decorrentes da distribuição anatômica dos mastócitos e do efeito funcional dos mediadores produzidos e liberados por estas células. Na infância, a doença é considerada uma condição benigna na maioria dos casos, cujo comprometimento característico é o cutâneo. As mais freqüentes manifestações na pele são os mastocitomas e a urticária pigmentosa. Lesões cutâneas bolhosas podem manifestar-se e acompanhar todas as formas de mastocitose e quando esta apresentação é a predominante, é denominada de mastocitose bolhosa. O diagnóstico de mastocitose é suspeitado clinicamente e confirmado pela histologia. A demonstração do aumento do número de mastócitos nas lesões cutâneas características se constitui no principal critério diagnóstico. Contudo, este método tem dificuldades técnicas que impedem a adequada reprodutibilidade dos achados, dificultando a elucidação de casos duvidosos e retardando seu tratamento. Considerando as propriedades imunológicas e a importância clínica dos mastócitos reveste-se de maior importância compreender o papel destas células nas doenças, sendo indispensável identificá-las e enumerá-las com acurácia nos tecidos. Objetivos Quantificar o número de mastócitos marcados com anticorpo monoclonal antitriptase, através de técnica imuno-histoquímica e análise de imagem, em biópsias cutâneas de crianças, com diagnóstico clínico de mastocitose. Descrever os achados histológicos; quantificar o número de mastócitos marcados com o anticorpo antitriptase entre as diferentes expressões clínicas da mastocitose cutânea; comparar o número de mastócitos entre os casos de mastocitose cutânea e mastocitose associada à sintomas sistêmicos e correlacionar as contagens de mastócitos entre os dois diferentes métodos (coloração por Giemsa com contagem manual e marcação com anticorpo antitriptase e análise digital). Material e Método Foram incluídas no estudo biópsias cutâneas de crianças de 0 a 14 anos, com diagnóstico clínico e histológico de mastocitose. Os casos foram classificados de acordo com a apresentação clínica cutânea em mastocitoma, urticária pigmentosa ou mastocitose bolhosa e assinalada a presença de sintomas sistêmicos associados. Os fragmentos de pele fixados em formalina e emblocados em parafina foram cortados e utilizados para diagnóstico histopatológico convencional, corados com hematoxilina-eosina e Giemsa, e para análise imuno-histoquímica com estreptavidina peroxidase marcados com anticorpo antitriptase. A densidade de mastócitos (número de células por área) foi realizada por um único observador na técnica histológica e através de um sistema de análise de imagem de vídeo no método imuno-histoquímico. Resultados Foram avaliados 33 casos de mastocitose, sendo 21 do sexo masculino. Dez casos (30,3%) apresentavam mastocitoma, 21 (63,6%) urticária pigmentosa e 2 (6,1%) mastocitose bolhosa. Todos os casos da amostra foram classificados como tendo mastocitose incipiente e em 6 (18,8%) pacientes pôde ser identificada a associação com sintomas sistêmicos. Prurido foi o sintoma mais freqüente, sendo relatado em 21 casos. Em 21 dos 33 casos foi identificada a infiltração de mastócitos na derme havendo predominância pela região perivascular (p=0,001, teste exato de Fisher). Não houve diferenças significativas entre a presença de infiltrado mastocitário e as várias formas cutâneas de mastocitose ou a mastocitose sistêmica. A presença de eosinófilos foi identificada em 15 casos (45,5%) e em 10 casos associadamente ao infiltrado perivascular de mastócitos. A densidade de mastócitos na técnica histológica, incluindo-se todos os casos, foi 50,00 células/mm2. Não houve diferença significativa das contagens entre os pacientes com mastocitoma e aqueles com urticária pigmentosa, assim como entre os pacientes com e sem sintomas sistêmicos associados aos cutâneos. A densidade de mastócitos encontrada com a técnica imuno-histoquímica e contagem por análise de imagem foi 158,85 células/mm2. Não houve diferença significativa das contagens entre os pacientes com mastocitoma e aqueles com urticária pigmentosa, assim como entre aqueles com e sem sintomas sistêmicos. Comparando-se a contagem dos mastócitos por área (densidade) entre a histologia e a imuno-histoquímica houve uma diferença significativa (p=0,0001 teste não-paramétrico de Wilcoxon). A média da diferença entre as contagens foi 199,98 células/mm2 (±365,31 DP). Também não houve semelhança, entre os dois métodos, nos grupos mastocitoma e urticária pigmentosa (p=0,005 e p=0,01, respectivamente, teste não-paramétrico de Wilcoxon). Puderam ser identificados 518% a mais de mastócitos com a técnica imunohistoquímica quando comparada com a histológica. Conclusões O presente estudo permite concluir que: 1) a localização preferencial da infiltração de mastócitos é dérmica e perivascular, não sendo possível identificar diferenças histológicas entre casos de urticária pigmentosa e mastocitoma; 2) o número de mastócitos marcados com o anticorpo monoclonal antitriptase e contados com análise digital de imagem, em biópsia de pele de crianças com diagnóstico clínico de mastocitose, foi 159 células por milímetro quadrado; 3) a densidade de mastócitos, foi semelhante entre os casos de urticária pigmentosa e mastocitoma e entre os casos com e sem sintomas sistêmicos associados nas duas diferentes técnicas empregadas; 4) o número de mastócitos por milímetro quadrado com a técnica imuno-histoquímica e a contagem através de análise de imagem foi significativamente maior quando comparada com a coloração através de Giemsa e a contagem manual, com uma diferença média entre os dois métodos de 200 células por milímetro quadrado; 5) a densidade de mastócitos com a técnica imunohistoquímica foi significativamente maior tanto nos casos com urticária pigmentosa quanto nos com mastocitoma, quando comparada com a técnica empregada rotineiramente e 6) com a técnica imuno-histoquímica e a contagem através de análise de imagem foi possível identificar 518% a mais de mastócitos quando comparada com a técnica histológica.

Aspectos do mercado eleitoral brasileiro: análise econométrica do impacto dos gastos de campanha nas eleições para a Câmara e o Senado de 2002

Esta dissertação de mestrado em economia foi motivada por uma questão complexa bastante estudada na literatura de economia política nos dias de hoje: as formas como campanhas políticas afetam votação em uma eleição. estudo procura modelar mercado eleitoral brasileiro para deputados federais senadores. Através de um modelo linear, conclui-se que os gastos em campanha eleitoral são fatores decisivos para eleição de um candidato deputado federal. Após reconhecer que variável que mede os gastos em campanha possui erro de medida (devido ao famoso "caixa dois", por exemplo), além de ser endógena uma vez que candidatos com maiores possibilidades de conseguir votos conseguem mais fontes de financiamento -, modelo foi estimado por variáveis instrumentais. Para senadores, utilizando modelos lineares modelos com variável resposta binaria, verifica-se também importância, ainda que em menor escala, da campanha eleitoral, sendo que um fator mais importante para corrida ao senado parece ser uma percepção priori da qualidade do candidato.

A Framework supporting collaboration on the distributed design of integrated systems

The work described in this thesis aims to support the distributed design of integrated systems and considers specifically the need for collaborative interaction among designers. Particular emphasis was given to issues which were only marginally considered in previous approaches, such as the abstraction of the distribution of design automation resources over the network, the possibility of both synchronous and asynchronous interaction among designers and the support for extensible design data models. Such issues demand a rather complex software infrastructure, as possible solutions must encompass a wide range of software modules: from user interfaces to middleware to databases. To build such structure, several engineering techniques were employed and some original solutions were devised. The core of the proposed solution is based in the joint application of two homonymic technologies: CAD Frameworks and object-oriented frameworks. The former concept was coined in the late 80's within the electronic design automation community and comprehends a layered software environment which aims to support CAD tool developers, CAD administrators/integrators and designers. The latter, developed during the last decade by the software engineering community, is a software architecture model to build extensible and reusable object-oriented software subsystems. In this work, we proposed to create an object-oriented framework which includes extensible sets of design data primitives and design tool building blocks. Such object-oriented framework is included within a CAD Framework, where it plays important roles on typical CAD Framework services such as design data representation and management, versioning, user interfaces, design management and tool integration. The implemented CAD Framework - named Cave2 - followed the classical layered architecture presented by Barnes, Harrison, Newton and Spickelmier, but the possibilities granted by the use of the object-oriented framework foundations allowed a series of improvements which were not available in previous approaches: - object-oriented frameworks are extensible by design, thus this should be also true regarding the implemented sets of design data primitives and design tool building blocks. This means that both the design representation model and the software modules dealing with it can be upgraded or adapted to a particular design methodology, and that such extensions and adaptations will still inherit the architectural and functional aspects implemented in the object-oriented framework foundation; - the design semantics and the design visualization are both part of the object-oriented framework, but in clearly separated models. This allows for different visualization strategies for a given design data set, which gives collaborating parties the flexibility to choose individual visualization settings; - the control of the consistency between semantics and visualization - a particularly important issue in a design environment with multiple views of a single design - is also included in the foundations of the object-oriented framework. Such mechanism is generic enough to be also used by further extensions of the design data model, as it is based on the inversion of control between view and semantics. The view receives the user input and propagates such event to the semantic model, which evaluates if a state change is possible. If positive, it triggers the change of state of both semantics and view. Our approach took advantage of such inversion of control and included an layer between semantics and view to take into account the possibility of multi-view consistency; - to optimize the consistency control mechanism between views and semantics, we propose an event-based approach that captures each discrete interaction of a designer with his/her respective design views. The information about each interaction is encapsulated inside an event object, which may be propagated to the design semantics - and thus to other possible views - according to the consistency policy which is being used. Furthermore, the use of event pools allows for a late synchronization between view and semantics in case of unavailability of a network connection between them; - the use of proxy objects raised significantly the abstraction of the integration of design automation resources, as either remote or local tools and services are accessed through method calls in a local object. The connection to remote tools and services using a look-up protocol also abstracted completely the network location of such resources, allowing for resource addition and removal during runtime; - the implemented CAD Framework is completely based on Java technology, so it relies on the Java Virtual Machine as the layer which grants the independence between the CAD Framework and the operating system. All such improvements contributed to a higher abstraction on the distribution of design automation resources and also introduced a new paradigm for the remote interaction between designers. The resulting CAD Framework is able to support fine-grained collaboration based on events, so every single design update performed by a designer can be propagated to the rest of the design team regardless of their location in the distributed environment. This can increase the group awareness and allow a richer transfer of experiences among them, improving significantly the collaboration potential when compared to previously proposed file-based or record-based approaches. Three different case studies were conducted to validate the proposed approach, each one focusing one a subset of the contributions of this thesis. The first one uses the proxy-based resource distribution architecture to implement a prototyping platform using reconfigurable hardware modules. The second one extends the foundations of the implemented object-oriented framework to support interface-based design. Such extensions - design representation primitives and tool blocks - are used to implement a design entry tool named IBlaDe, which allows the collaborative creation of functional and structural models of integrated systems. The third case study regards the possibility of integration of multimedia metadata to the design data model. Such possibility is explored in the frame of an online educational and training platform.

A evidenciação e as companhias transnacionais: estudo de casos

O objetivo fundamental deste trabalho foi verificar se as informações contábeis fornecidas pelas Organizações Trasnacionais atendem adequadamente às necessidades mínimas de informação, estabelecidas pelo órgão encarregado de tentar uma harmonização dos assuntos relativos ao disclosure das informações, a nível internacional. Assim, procedeu-se a uma revisão dos principais conceitos teóricos sobre a evidenciação das informações, destacando-se suas principais características. Abordou-se o campo das Companhias Multinacionais, bem como a atuação dos organismos internacionais preocupados com a necessidade de estabelecer normas e práticas relativas à contabilidade e ao disclosure em nível mundial, especialmente o trabalho realizado pela Organização das Nações Unidas, através do "Grupo de Trabalho Intergovernamental de Especialistas em Padrões Internacionais de Contabilidade e Informação". A partir dos pronunciamentos emitidos por esse Grupo, organizou-se um quadro de referência que fundamentou a pesquisa. Em virtude do propósito descritivo do trabalho, optou-se pelo método do estudo de casos. Com base em dados colhidos diretamente nos arquivos da Comissão de Valores Mobiliários, descreveu-se as características e, principalmente, as informações evidenciadas pelas empresas estudadas. Os resultados obtidos permitiram comparar o nível de disclosure praticado por essas empresas em relação ao quadro de referência previamente levantado e, ainda, possibilitaram que se chegasse a importantes conclusões.

Facebook3d

INTRODUCTION With the advent of Web 2.0, social networking websites like Facebook, MySpace and LinkedIn have become hugely popular. According to (Nilsen, 2009), social networking websites have global1 figures of almost 250 millions unique users among the top five2, with the time people spend on those networks increasing 63% between 2007 and 2008. Facebook alone saw a massive growth of 566% in number of minutes in the same period of time. Furthermore their appeal is clear, they enable users to easily form persistent networks of friends with whom they can interact and share content. Users then use those networks to keep in touch with their current friends and to reconnect with old friends. However, online social network services have rapidly evolved into highly complex systems which contain a large amount of personally salient information derived from large networks of friends. Since that information varies from simple links to music, photos and videos, users not only have to deal with the huge amount of data generated by them and their friends but also with the fact that it‟s composed of many different media forms. Users are presented with increasing challenges, especially as the number of friends on Facebook rises. An example of a problem is when a user performs a simple task like finding a specific friend in a group of 100 or more friends. In that case he would most likely have to go through several pages and make several clicks till he finds the one he is looking for. Another example is a user with more than 100 friends in which his friends make a status update or another action per day, resulting in 10 updates per hour to keep up. That is plausible, especially since the change in direction of Facebook to rival with Twitter, by encouraging users to update their status as they do on Twitter. As a result, to better present the web of information connected to a user the use of better visualizations is essential. The visualizations used nowadays on social networking sites haven‟t gone through major changes during their lifetimes. They have added more functionality and gave more tools to their users, but still the core of their visualization hasn‟t changed. The information is still presented in a flat way in lists/groups of text and images which can‟t show the extra connections pieces of information. Those extra connections can give new meaning and insights to the user, allowing him to more easily see if that content is important to him and the information related to it. However showing extra connections of information but still allowing the user to easily navigate through it and get the needed information with a quick glance is difficult. The use of color coding, clusters and shapes becomes then essential to attain that objective. But taking into consideration the advances in computer hardware in the last decade and the software platforms available today, there is the opportunity to take advantage of 3D. That opportunity comes in because we are at a phase were the hardware and the software available is ready for the use of 3D in the web. With the use of the extra dimension brought by 3D, visualizations can be constructed to show the content and its related information to the user at the same screen and in a clear way. Also it would allow a great deal of interactivity. Another opportunity to create better information‟s visualization presents itself in the form of the open APIs, specifically the ones made available by the social networking sites. Those APIs allow any developers to create their own applications or sites taking advantage of the huge amount of information there is on those networks. Specifically to this case, they open the door for the creation of new social network visualizations. Nevertheless, the third dimension is by itself not enough to create a better interface for a social networking website, there are some challenges to overcome. One of those challenges is to make the user understand what the system is doing during the interaction with the user. Even though that is important in 2D visualizations, it becomes essential in 3D due to the extra dimension. To overcome that challenge it‟s necessary the use of the principles of animations defined by the artists at Walt Disney Studios (Johnston, et al., 1995). By applying those principles in the development of the interface, the actions of the system in response to the user inputs became clear and understandable. Furthermore, a user study needs to be performed so the users‟ main goals and motivations, while navigating the social network, are revealed. Their goals and motivations are important in the construction of an interface that reflects the user expectations for the interface, but also helps in the development of appropriate metaphors. Those metaphors have an important role in the interface, because if correctly chosen they help the user understand the elements of the interface instead of making him memorize it. The last challenge is the use of 3D visualization on the web, since there have been several attempts to bring 3D into it, mainly with the various versions of VRML which were destined to failure due to the hardware limitations at the time. However, in the last couple of years there has been a movement to make the necessary tools to finally allow developers to use 3D in a useful way, using X3D or OpenGL but especially flash. This thesis argues that there is a need for a better social network visualization that shows all the dimensions of the information connected to the user and that allows him to move through it. But there are several characteristics the new visualization has to possess in order for it to present a real gain in usability to Facebook‟s users. The first quality is to have the friends at the core of its design, and the second to make use of the metaphor of circles of friends to separate users in groups taking into consideration the order of friendship. To achieve that several methods have to be used, from the use of 3D to get an extra dimension for presenting relevant information, to the use of direct manipulation to make the interface comprehensible, predictable and controllable. Moreover animation has to be use to make all the action on the screen perceptible to the user. Additionally, with the opportunity given by the 3D enabled hardware, the flash platform, through the use of the flash engine Papervision3D and the Facebook platform, all is in place to make the visualization possible. But even though it‟s all in place, there are challenges to overcome like making the system actions in 3D understandable to the user and creating correct metaphors that would allow the user to understand the information and options available to him. This thesis document is divided in six chapters, with Chapter 2 reviewing the literature relevant to the work described in this thesis. In Chapter 3 the design stage that resulted in the application presented in this thesis is described. In Chapter 4, the development stage, describing the architecture and the components that compose the application. In Chapter 5 the usability test process is explained and the results obtained through it are presented and analyzed. To finish, Chapter 6 presents the conclusions that were arrived in this thesis.

Análise da modelagem experimental da perda de injetividade

Injectivity decline, which can be caused by particle retention, generally occurs during water injection or reinjection in oil fields. Several mechanisms, including straining, are responsible for particle retention and pore blocking causing formation damage and injectivity decline. Predicting formation damage and injectivity decline is essential in waterflooding projects. The Classic Model (CM), which incorporates filtration coefficients and formation damage functions, has been widely used to predict injectivity decline. However, various authors have reported significant discrepancies between Classical Model and experimental results, motivating the development of deep bed filtration models considering multiple particle retention mechanisms (Santos & Barros, 2010; SBM). In this dissertation, inverse problem solution was studied and a software for experimental data treatment was developed. Finally, experimental data were fitted using both the CM and SBM. The results showed that, depending on the formation damage function, the predictions for injectivity decline using CM and SBM models can be significantly different

Quatro vezes Lula-lá A imagem pública de Lula no horário eleitoral nas quatro campanhas presidenciais

Descreve-se aqui a formação da Imagem Pública de Luis Inácio Lula da Silva através do Horário Gratuito de Propaganda Eleitoral, nas quatro eleições presidenciais que marcaram o período de democratização do País: 1989, 1994, 1998 e 2002. O fato de um candidato contrário às elites, três vezes derrotado em eleições anteriores, conseguir convencer através da mídia a elegê-lo eleitores que votavam antes em seus adversários, demonstra que a democracia representativa brasileira é institucionalmente compatível com regime de informação imposto pelos meios de comunicação de massa na sociedade atual? Além de comprovar a preponderância da Imagem Pública em processos eleitorais em que o Cenário de Representação da Política se caracteriza pela imprevisibilidade, a pesquisa constatou ainda que a atual luta política, mais que uma luta meramente pela visibilidade imposta pela TV e pelos meios de comunicação em geral ainda é uma disputa política. E que a mídia enquadra a política, mas também é por ela agendada, principalmente em momentos de grande incerteza política e/ou pouca previsibilidade eleitoral

Correlação da atividade de lactato desidrogenase e concentração de lactato com a classificação de efusões em cães

As efusões são problemas clínicos frequentes e que ocorrem em consequência de uma enfermidade que culmine com diminuição da pressão coloidosmótica intravascular, elevação da pressão hidrostática local, aumento da permeabilidade vascular e/ou comprometimento da drenagem realizada pelos vasos linfáticos. Dessa maneira, a avaliação laboratorial desse fluido torna-se relevante para que, em conjunto com os sinais clínicos apresentados pelo paciente, possa ser firmado um possível diagnóstico e instituída ação terapêutica adequada. Assim sendo, a classificação de uma efusão em transudato ou exsudato torna-se um dos pontos críticos para a elucidação do diagnóstico e condução do caso clínico. em Medicina Veterinária, o método tradicional de classificação de uma efusão é baseado na contagem celular e na concentração de proteínas do fluido. Contudo, diversos estudos evidenciam que tais parâmetros não são suficientes para a correta classificação de todas as efusões. Assim, o presente estudo foi conduzido com o objetivo de verificar a correlação de outros parâmetros bioquímicos com a diferenciação das efusões transudativas e exsudativas e, para tal, foram avaliadas as atividades de lacatato desidrogenase (LDH) das efusões, a relação de sua atividade fluido/soro, concentração de lactato das efusões, o gradiente de concentração de lactato do soro para o fluido e a concentração de proteínas das efusões. Os resultados obtidos permitiram observar que a atividade de LDH, a relação LDH efusão/soro, a concentração de lactato e o gradiente de concentração de lactato soro/efusão apresentam diferença estatisticamente significativa (P<0,05), bem como alta correlação com a classificação de uma efusão exsudativa.

Morfologia e quantificação da microbiota intestinal do curimbatá (Prochilodus lineatus) e do cascudo cinza (Pterygoplichthys anisitsi) cultivados em cativeiro

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Épocas de colheita e tratamento pré-germinativos para superação da dormência de sementes Mimosa caesalpiniifolia Benth.

Este trabalho teve por objetivo avaliar a influência da época de colheita e de tratamentos pré-germinativos na germinação e vigor de sementes de Mimosa caesalpiniifolia Benth. (sabiá). Para tanto, realizou-se um experimento no Laboratório de Análise de Sementes do CCA-UFPB, em Areia, PB, em delineamento inteiramente ao acaso, com os tratamentos distribuídos em esquema fatorial 2 x 2 x 14, com os fatores ano de colheita (2002 e 2003), sementes dentro ou fora do craspédio e tratamentos pré-germinativos, com quatro repetições de 50 sementes. Os tratamentos pré-germinativos consistiram na imersão em água, à temperatura ambiente, por 12, 24, 36, 48 e 60 h; imersão em água quente, à temperatura de 70, 80, 90 e 100 ºC, por 1 min; imersão em água quente, à temperatura de 70, 80, 90 e 100 ºC, até o resfriamento total; e testemunha (sementes intactas). As características analisadas foram: porcentagem, primeira contagem e índice de velocidade de emergência das plântulas. Os tratamentos de imersão em água quente (80 ºC) até o resfriamento total, nas sementes de 2002, seguido do mesmo tratamento a 90 ºC, em sementes que foram semeadas fora do craspédio, mostraram-se mais adequados para condução dos testes de germinação e vigor em sementes de M. caesalpiniifolia. As sementes semeadas fora do craspédio foram as mais apropriadas para avaliação da qualidade fisiológica, apresentando também maior homogeneidade do processo germinativo, independentemente do ano avaliado.

Potencial fisiológico de sementes de mutambo (Guazuma ulmifolia Lam.) em diferentes procedências

The work had as objective to evaluate the provenances of seeds to verify the efficiency of different tests of vigor for identification of the physiological potential in four lots of seeds of mutamba (Guazuma ulmifolia Lam.). The study it was developed in the Laboratory of Analysis of Seeds and in the Experimental Fishery of Ornamental and Forest Plants - UNESP, Jaboticabal, SP. Four lots of seeds proceeding from three São Paulo localities had been used: lots I and II, collected in the city of Jaboticabal in 2000 and 2001, respectively, lot III: collected in Saint Rita do Passo Quatro and it crowds IV: collected in Luiz Antonio, both in 2001. The seeds used in all the tests had been escarificadas with sulfuric acid during 50 minutes, and washed in current water during 15 minutes. They had been evaluated: seed moisture, test of germination, test of first counting, index of germination speed, emergency in fishery, index of emergency speed. The seeds moisture of the seeds in the different lots had presented small variations (9,2 10.0%). Statistical differences for the germination percentage, emergency in fishery and index of speed of emergency in the different studied lots had not been verified. The tests of first counting and index of germination speed had revealed adequate for evaluation of the physiological potential of the lots. The seeds of lot III proceeding from the city of Santa Rita do Passo Quatro, had presented superior physiological potential to the too much studied lots.

Aplicação de indicadores webométricos nos programas de Pós-Graduação das engenharias recomendados pela CAPES

This study aims to identify, through the application of webometric indicators, which Post-Graduate Courses in Engineering recommended by the Coordination of Improvement of Higher Personnel Education (CAPES) in Brazil stand out in the web space, in relation to the communication process and dissemination of scientific information in the academic environment. For this, we analyzed the structures content of the sites, the use, through the conduct of investigations and searches, the quality of information available, as well as the structure of existent hypertexts in the sites of this universe of search. The tools and methodologies adopted for this study are: search engines (Google, Yahoo), Mapper software (Xenu Link Sleuth) and analysis software and visualization of networks (and Ucinet6 NetDraw). Webometric indicators are also used, such as size of the web sites, visibility, web impact factor, brightness and density of the network. These instruments provide a brief analysis and evaluation for this webometric study. Therefore, from the incursion of the literature used, it appears that there are many advantages of using this type of metric study in the so called Information Society. The obtained results could identify which postgraduate courses in engineering has a better availability of their information on the Web, as well to define which of these courses stands out in relation to the use of their information, which has been outstanding in respect to its impact factor and which offers a greater number of links that serve as a source of information for its users, contributing, in its turn, with the navigability of the same network. In summary, it is asserted that the webometric study presents promising results, which are able to achieve the proposed objectives, as well as identify the factors that contribute significantly to the good visualization of these sites in the network, thus helping the spread of information and scientific communication through the use of the Web.

Supervisório Inteligente de Processos na Idústria do Petróleo e Gás :Aplicação em uma Coluna de Destilação Simulada Integrada a Instrumentação Real

The need to implement a software architecture that promotes the development of a SCADA supervisory system for monitoring industrial processes simulated with the flexibility of adding intelligent modules and devices such as CLP, according to the specifications of the problem, it was the motivation for this work. In the present study, we developed an intelligent supervisory system on a simulation of a distillation column modeled with Unisim. Furthermore, OLE Automation was used as communication between the supervisory and simulation software, which, with the use of the database, promoted an architecture both scalable and easy to maintain. Moreover, intelligent modules have been developed for preprocessing, data characteristics extraction, and variables inference. These modules were fundamentally based on the Encog software