Avaliação da potencialidade de incorporação de um lodo de uma indústria de produtos de limpeza como adição mineral em concretos de cimento Portland

The generation of industrial wastes has been increased more and more in recent decades, motivating studies about a correct sustainable allocation and that also represents advantages for their generators. In this context, are included two companies of cleaning products niche, located in São José do Mipibu/RN, that produces industrial sludge at a sewage treatment plant, and that is the main approach of this research. Given this, it was studied the incorporation potentiality of this sludge as a mineral addition in cement matrix for concrete production due it high capacity of wastes immobilization inside this material, which are subsequently used in the company for making precast articles. Were added different sludge concentrations (5, 10, 15 and 20%) in a common trait (1: 2: 3), and evaluated their techniques and microstructural implications via workability test in fresh state and compressive strength, full porosity and scanning electron microscopy (SEM) in the hardened state. The results demonstrated the feasibility of the process both from a technical and environmental view as economical. All concretes produced with residue showed an increase of workability given the nature of the waste that had surfactants substances capable of adsorbing tiny particles of air into the batter. However, for all concentrations were obtained lower compressive resistances than standard concrete, with a reduction of 39% for samples with 20% of sludge. This are attributed mainly to an increase of porosity in the transition zone of these material, resulting from increased formation of ettringite at the detriment to the formation of other compounds, but which still allows the use of these for the manufacture of concrete articles with non-structural nature, such as precast floor. In addition, the water absorption and void ratio increased slightly for all samples, except the concrete with 20% of waste that has a reduction for the last parameter. Given this context, the recommended maximum level is 20%, constituting a significant proportion and able to allocate sustainably all waste generated in the industry.

Estudo da eficiência dos adsorventes de Al2O3 e Fe/Al2O3 para remoção de BTX presente em água contaminada com gasolina

Contamination of groundwater by BTX has been featured in recent decades. This type of contamination is due to small and continuous leaks at gas stations, causing serious problems to public health and the environment. Based on these antecedents, the search for new alternatives for treating contaminated water is shown to be essential. Therefore, this study aimed to evaluate the efficiency of removal of BTX by adsorption processes employing commercial alumina (Al2O3) and alumina supported with iron (Fe/Al2O3) as adsorbents. It was prepared by a in a synthetic gasoline solution and distilled water to simulate an actual sample. Initially, the adsorbents were characterized by techniques XRD, TG / DTG, XRF, FTIR and SEM/EDS, several trials, where he was placed synthetic solution to react in the presence of Al2O3 and Fe/Al2O3 in a closed, mechanical stirring system were performed varying the catalyst concentration 2, 4 and 6 g.L-1 every 0, 10, 30 60, 90 and 120 min, aliquots were taken and brought to analysis by gas chromatography flame ionization with headspace extraction. The results indicated that the absorbent which has higher BTX removal capacity was the Fe/Al2O3 at a concentration of 6 g.L-1, pH = 4 and time of 90 minutes reaction, resulting in an efficiency, resulting in a 86,5% efficiency for benzene removal, for the 95,4% toluene, 90,8% for ɱ,ρ- xylene and 93.7% for the θ-xylenes. Subsequently, we performed a kinetic study of the reactions, the values of experimental adsorption capacity (qe) showed agreement with the values of the theoretical adsorption capacity (qc) to the pseudo-second-order model in the adsorption tests using 2 and 6 gL-1 of Al2O3 and assays using 2, 4 and 6 g.L-1 of Fe/Al2O3. A fact corroborated by the R2 values, thus indicating that the chemical interactions are present in the adsorption mechanisms of BTX.

Eficiência mastigatória e qualidade das próteses totais confeccionadas pelas técnicas tradicionais e simplificada: um ensaio clínico

Traditional methods for dentures fabrication require a wide clinical and laboratory procedures; however, there is no scientific evidence that these methods can produce better results when compared with simplified methods. Aim: To evaluate the effectiveness of a simplified methods for denture fabrication, comparing it to the traditional one through masticatory efficiency and prosthesis quality. Method: A randomized controlled trial was conducted with 50 patients, 25 rehabilitated with prosthesis produced by traditional technique and 25 rehabilitated by a simplified technique. The masticatory efficiency was evaluated by colorimetric method, using chewing capsules. The quality of prosthesis was obtained using a reliable and reproducible instrument. Statistical analysis of the masticatory efficiency and quality of the prosthesis was obtained by the Mann-Whitney test. Results: 39 patients completed the study, 18 on traditional group and 21 on simplified group. There was no difference between groups for the masticatory efficiency (p = 0.835) and the quality of the prosthesis (p = 0672). The evaluation of the overall quality of the prosthesis according to oral conditions, demonstrated significant difference on the height of the mandibular ridges (p = 0.010) and mandibular muscle attachments (p = 0.039). Conclusion: Complete dentures fabricated by simplified method were considered effective from the point of view of masticatory efficiency and quality of prosthetics, with results similar to those made by the traditional method.

Eficiência mastigatória e qualidade das próteses totais confeccionadas pelas técnicas tradicionais e simplificada: um ensaio clínico

Traditional methods for dentures fabrication require a wide clinical and laboratory procedures; however, there is no scientific evidence that these methods can produce better results when compared with simplified methods. Aim: To evaluate the effectiveness of a simplified methods for denture fabrication, comparing it to the traditional one through masticatory efficiency and prosthesis quality. Method: A randomized controlled trial was conducted with 50 patients, 25 rehabilitated with prosthesis produced by traditional technique and 25 rehabilitated by a simplified technique. The masticatory efficiency was evaluated by colorimetric method, using chewing capsules. The quality of prosthesis was obtained using a reliable and reproducible instrument. Statistical analysis of the masticatory efficiency and quality of the prosthesis was obtained by the Mann-Whitney test. Results: 39 patients completed the study, 18 on traditional group and 21 on simplified group. There was no difference between groups for the masticatory efficiency (p = 0.835) and the quality of the prosthesis (p = 0672). The evaluation of the overall quality of the prosthesis according to oral conditions, demonstrated significant difference on the height of the mandibular ridges (p = 0.010) and mandibular muscle attachments (p = 0.039). Conclusion: Complete dentures fabricated by simplified method were considered effective from the point of view of masticatory efficiency and quality of prosthetics, with results similar to those made by the traditional method.

Estratégias de eficiência na cozinha

A transformação de elementos naturais em alimentos foi, é e será um tema central na actividade humana, convocando perícia, recursos, objectos e cultura, construindo em seu redor toda uma sociabilização e estabelecendo a refeição como um cerne civilizacional. Neste cenário, ritualizado na cozinha e na sala, convergem os mais diversos elementos disponibilizados pela sociedade contemporânea para produzir a refeição e dele resultam os mais diversos resíduos. Numa sociedade, em que a consciencialização da finitude dos recursos aliada ao aumento demográfico exponencial, gerou uma atitude ecológica que se tenta difundir e aumentar num panorama multicontraditório, todas as contribuições ganham uma urgência e validade significativa, sendo neste contexto que um trabalho de investigação pelo design, dedicado ao aumento de eficiência na confecção e consumo de refeições, assume a sua contribuição. Desde a utilização da tampa até aos mais recentes electrodomésticos, que a necessidade de uma maior eficiência energética se manifestou, embora de uma maneira difusa e colateral num contexto dominado pela qualidade, diversidade gastronómica e tempo de confecção. Pela análise das práticas, dos objectos e do espaço utilizados, verifica-se que existe um potencial de economia de recursos, que se pode obter pelo design de objectos e processos, relevantes para a refeição, que alarga e complementa as acções já implementadas, constituindo uma investigação em design que aborda várias dimensões desde aspectos históricos à produção de novos objectos e processos. Um olhar renovado e orientado para a eficiência coloca questões que, não pondo em causa aspectos qualitativos e culturais da refeição, poderão modificar e/ou complementar objectos e processos, melhorando práticas, potenciando espaços e relações. A concretização de cinco objectos e as pistas de investigação sugeridas demonstram a pertinência desta proposta e são o culminar deste trabalho.

Otimização energética de sistemas de arejamento e agitação

Este estágio foi desenvolvido na Águas do Oeste, no período compreendido entre outubro de 2013 e julho de 2014, tendo como objetivo a otimização energética dos sistemas de arejamento e agitação. A importância deste tema deve-se ao fato de estes sistemas serem responsáveis por cerca de 70% do consumo de uma ETAR. Identificaram-se possíveis equipamentos a intervencionar e através de pesquisa bibliográfica e consulta de experts possíveis soluções em termos de eficiência energética, sendo apresentado neste relatório um resumo das soluções identificadas. Neste estudo foram avaliados vários casos de estudo em ETAR que servem como base para muitas outras da concessão da Águas do Oeste. Nestas ETAR foram testadas algumas das soluções identificadas. Desta análise conclui-se que tanto a agitação como o arejamento efetuado na maioria das ETAR é inflexível a variações de carga e/ou excessivo existindo assim oportunidades de otimização tanto na diminuição de equipamentos por tanque como no corte de potência de arejamento e de agitação e na limpeza dos difusores, é muito importante para repor a eficiência de transferência dos mesmos em condições muito semelhantes às de origem (deve ser efetuada regularmente num período que dependerá de ETAR para ETAR). A etapa de desidratação na ETAR da Atouguia da Baleia pode com pequenas alterações ser efetuada sem acompanhamento, ou seja em períodos noturnos, podendo-se assim reduzir o tempo de funcionamento do agitador e arejador do tanque de lamas que atualmente funcionam em contínuo. Concluiu-se ainda que a otimização dos sistemas de arejamento e agitação é uma área onde existe um longo caminho a percorrer, onde há muito por testar e aplicar e que muitas vezes também passa por mudança de perceções da realidade e comportamentos.

Estabilidade de paredes duplas de alvenaria ensaios de eficiência do grampeamento

As paredes de alvenaria não-resistentes têm sido, ao longo do tempo, amplamente utilizadas em fachadas, principalmente como material de enchimento. Este tipo de paredes detêm um papel de elevada importância em sistemas complexos como são os edifícios, uma vez que, separam o interior do ambiente exterior desenrolando um papel chave no desempenho dos edifícios, bem como no conforto dos seus utilizadores. Numa tentativa de aumentar a eficiência energética dos edifícios, vários países têm vindo a utilizar paredes duplas de alvenaria, a fim de criar caixas de ar ou espaços para colocar materiais de isolamento. No entanto, se este tipo de construção não for bem aplicado pode conduzir a patologias ou até mesmo ao colapso das paredes para fora do plano, particularmente devido a forças extremas como os sismos. Esta dissertação tem como objetivo apresentar uma campanha experimental que foi desenvolvida, a fim de investigar a influência do grampeamento em paredes duplas de alvenaria quando submetidas a cargas de compressão. Durante o estudo foram construídos diferentes provetes de paredes duplas de alvenaria onde foram aplicados diferentes tipos e quantidades de grampos. Para além disso, os grampos foram colocados em diferentes posições nas paredes, levando a uma quantidade significativa de variáveis. As cargas axiais aplicadas nos provetes, com o uso de um macaco hidráulico, serviram para averiguar e avaliar o número ideal e posição dos grampos contribuindo, portanto, para entender o cuidado necessário na construção de paredes duplas de alvenaria.

Eficiência técnica dos produtores familiares no Projeto de Irrigação do Baixo Açu/RN

SILVA, Jorge Luiz Mariano da. Eficiência técnica dos produtores familiares no projeto de irrigação do Baixo Açu/RN.In: CONGRESSO SA SOCIEDADE BRASILEIRA DE ECONOMIA E SOCIOLOGIA RURAL,42., 2004, Cuiabá - MT. Dinâmcias Setorias e Desevolvimento Regional, 2004.

Eficiência, gestão e meio ambiente na carcinicultura do Rio Grande do Norte

SILVA, J. L. M. da; SAMPAIO, L. M. . Eficiência, Gestão e Meio Ambiente na Carcinicultura do Rio Grande do Norte. In: Congresso da Sociendade Brasileira de Economia, Administração e Sociologia Rural - SOBER, 40., 2007, Londrina. Conhecimentos para a Agricultura do Futuro, 2007.

Análise da eficiência de contratos de serviços de elevada especificidade terceirizados pela petrobras

The definition of the boundaries of the firms is subject that has occupied the organizational theorists long ago, being the seminal work of Coase (1937) indicated as the trigger for one theoretical evolution, with emphasis on governance structures, which led to a modern theory of incomplete contracts. The Transaction Cost Economics (TCE) and Agency Theory arise within this evolution, being widely used in studies related to the theme. Empirically, data envelopment analysis (DEA) has established itself as a suitable tool for analysis of efficiency. Although TCE argues that specific assets must be internalized, recent studies outside the mainstream of theory show that, often, firms may decide, for various reasons, hire them on the market. Researches on transaction costs face with the unavailability of information and methodological difficulties in measuring their critical variables. There`s still the need for further methodological deepening. The theoretical framework includes classic works of TCE and Agency Theory, but also more recent works, outside the mainstream of TCE, which warn about the existence of strategies in use of specific assets that aren`t necessarily aligned with the classical ideas of TCE. The Brazilian oil industry is the focus of this thesis, that aimed to evaluate the efficiency of contracts involving high specificity service outsourced by Petrobras. In order to this, we made the categorization of outsourced services in terms of specificity, as well the description of services with higher specificity. Then, we verified the existence of relationship between the specificity of services and a number of variables, being found divergent results than those that are preached by the mainstream of TCE. Then, we designed a DEA model to analyze the efficiency in the use of onshore drilling rigs, identified among the services of highest specificity. The next step was the application of the model to evaluate the performance of drilling rigs contracts. Finally, we verified the existence of relationship between the efficiency of contracts and a number of variables, being found, again, results not consistent with the theory mainstream. Regarding to analyze of efficiency of drilling rigs contracts, the model developed is compatible with what is found in academic productions in efficiency of drilling rigs. The results on efficiency show a wide range of scores, with efficiencies ranging from 31.79% to 100%, being low the sample efficiency average. There is consonance between the model results and the practices adopted by Petrobras. The results strengthen the DEA as an important tool in studies of efficiency with possibility to use for analysis other types of contracts. In terms of theoretical findings, the results reinforce the arguments that there are situations in which the strategies of the organizations, in terms of use of assets and services of high specificity, do not necessarily follow what is recommended by the mainstream of TCE

Relações interorganizacionais e eficiência coletiva: um estudo de caso no arranjo produtivo local de confecções do Agreste de Pernambuco

This work is a study in the Local Productive Arrangement of confections from Agreste of Pernambuco, as a relevant sector in economic and social aspect. This research has as central aim to understand how the inter-organizational relations influence the collective efficiency of arrangement. The theoretical framework employed highlights the approaches that deal with the benefits of business agglomeration for the develop­ment of firms and regions. It has discussed the approach of small and medium enter­ prises and industrial districts (SCHMITZ, 1997), which introduce the concept of col­ lective efficiency, explaining that only those externalities explained by Marshall (1996) are not sufficient to explain the competitive advantage of enterprises, expand­ing the idea that organizations achieve competitive advantage not acting alone. To examine the influences of relations in the collective efficiency, it has been taken as analytical perspective theory of social networks (GRANOVETTER, 1973, 1985; BURT, 1992; UZZI, 1997) because it has believe that this approach provides subsi­ dies for a structural analysis of social relationships in face the behavior of human ac­tion. By examining the organizations in a social network, you should understand the reason of this establishment of the relationship, their benefits, and as the information flow takes place and density of links between the actors (Powell; SMITH-DOERR, 1994). As for the methods, this study is characterized as a case study, in according to the purposed objectives, in addition to qualitative method. Also, due to recovering of the historical milestones of the arrangement, it is used a sectional approach with longitudinal perspective (VIEIRA, 2004). The primary and secondary data were used in order to understand the evolutionary process of the sector and their inter-actors re­ lationships in the arrangement for the promotion of development, for both, was used the contend and documentary analysis technique, respectively (DELLAGNELO ; SIL­VA, 2005). The approach of social networks has permitted understand that social re­lationships may extend the collective efficiency of the arrangement, and therefore need to develop policies that encourage the legalization of informal companies in ar­rangement, by showing up themselves representative. Thus, the relations estab­ lished in LPA of confections from Agreste of Pernambuco need for more effective mechanisms to broaden the collective efficiency. Therefore, this way as take place has directly benefited only a group of companies that are linked in some way the sup­portive institutions. So we can conclude that the inter-actor relations have limited the collective efficiency of LPA, being stimulated by the institutions in support only to groups of entrepreneurs, even those that produce external relations for all clustered companies

Avaliação da eficiência do sistema de abastecimento de água da APA

A água é um recurso essencial e escasso, como tal, é necessário encontrar medidas que permitam o seu uso de modo sustentável e garantam a proteção do meio ambiente. Devido a esta crescente preocupação assiste-se a um movimento legislativo, nacional e internacional, no sentido de garantir o desenvolvimento sustentável. Surge assim, a Diretiva Quadro da Água e a Lei da Água, que é complementada com legislação diversa. Como elemento constituinte do ciclo urbano da água, os Sistemas de Abastecimento têm sofrido evoluções nem sempre adequadas. É neste contexto que, em Portugal, nascem as diversas ferramentas para a melhoria da gestão dos recursos hídricos. As Entidades Gestoras têm como finalidade a gestão eficiente do bem água, e dispõe de dois importantes instrumentos, o Programa Nacional para o Uso Eficiente da Água e o Guia para o “controlo de perdas de água em sistemas públicos de adução e distribuição”(ERSAR). Esta Gestão passa, não só pela abordagem da problemática das perdas de água, reais e aparentes, como também pela análise do comportamento que origina o desperdício. A APA, enquanto entidade gestora, procura maximizar a eficiência do seu sistema de abastecimento, para tal, foram aplicadas as ferramentas propostas pelo ERSAR. Concluindo-se que este sistema tem um total de perdas de água de 34%, devendo-se estas perdas essencialmente ao envelhecido parque de contadores e perdas nos ramais de distribuição (teórico). As perdas comerciais representam cerca de 69%, o que revela que os volumes de água não faturados (medidos ou não) são muito elevados. Por outro lado, a realização do cálculo do Balanço Hídrico e dos índices de desempenho permitem classificar a performance do sistema de abastecimento e compará-la com os seus objetivos de gestão. Atendendo ao volume de água perdido nos ramais, foram efetuadas medições noturnas, verificando-se que no Porto de Pesca Costeira existe um volume de água escoado não justificado. Neste sentido, elaborou-se um plano de ação para aumentar a eficiência do sistema, ou seja, reduzir as perdas totais de 34% para 15%.

Avaliação da eficiência dos programas de pós-graduação acadêmicos em Administração, Contabilidade e Turismo

The Triennial Evaluation of Coordination for the Improvement of Higher Education Personnel (CAPES) is made according to several indicators, divided into several issues and items, and their weights. In these it is evident the importance of scientific periodicals. This study aims to evaluate the relative efficiency of post-graduate students in Business Administration, Accounting and tourism evaluated by CAPES in Brazil. The methodology used the data envelopment analysis - DEA (Data Envelopment Analysis). The data were obtained from the site and organized by the CAPES Qualis score. The analysis was performed by the DEA variable returns to scale, product-oriented (BCC-O), with data from the three-year periods 2004-2006 and 2007-2009. Among the main results are the average increase significantly the relative efficiency of the programs in the period 2007-2009 compared to 2004-2006 period, the highest average efficiency of programs linked to public institutions in relation to private, doctoral programs with the present average efficiency sharply higher than those only with masters, and senior programs in general were more efficient. There is also moderate and significant correlation between the efficiency scores and concepts CAPES. The Malmquist index analysis showed that more than 85% of programs had increased productivity. It is noteworthy that the main effect that influences the increase of the Malmquist index is the displacement of the border (Frontier-shift)

Eficiência e razão de hedge: uma análise dos mercados futuro brasileiros de boi, café, etanol, milho e soja

This research aims to investigate the Hedge Efficiency and Optimal Hedge Ratio for the future market of cattle, coffee, ethanol, corn and soybean. This paper uses the Optimal Hedge Ratio and Hedge Effectiveness through multivariate GARCH models with error correction, attempting to the possible phenomenon of Optimal Hedge Ratio differential during the crop and intercrop period. The Optimal Hedge Ratio must be bigger in the intercrop period due to the uncertainty related to a possible supply shock (LAZZARINI, 2010). Among the future contracts studied in this research, the coffee, ethanol and soybean contracts were not object of this phenomenon investigation, yet. Furthermore, the corn and ethanol contracts were not object of researches which deal with Dynamic Hedging Strategy. This paper distinguishes itself for including the GARCH model with error correction, which it was never considered when the possible Optimal Hedge Ratio differential during the crop and intercrop period were investigated. The commodities quotation were used as future price in the market future of BM&FBOVESPA and as spot market, the CEPEA index, in the period from May 2010 to June 2013 to cattle, coffee, ethanol and corn, and to August 2012 to soybean, with daily frequency. Similar results were achieved for all the commodities. There is a long term relationship among the spot market and future market, bicausality and the spot market and future market of cattle, coffee, ethanol and corn, and unicausality of the future price of soybean on spot price. The Optimal Hedge Ratio was estimated from three different strategies: linear regression by MQO, BEKK-GARCH diagonal model, and BEKK-GARCH diagonal with intercrop dummy. The MQO regression model, pointed out the Hedge inefficiency, taking into consideration that the Optimal Hedge presented was too low. The second model represents the strategy of dynamic hedge, which collected time variations in the Optimal Hedge. The last Hedge strategy did not detect Optimal Hedge Ratio differential between the crop and intercrop period, therefore, unlikely what they expected, the investor do not need increase his/her investment in the future market during the intercrop

A influência de decisões arquitetônicas na eficiência energética do Campus vol. 1/UFRN

Building design is an effective way to achieve HVAC energy consumption reduction. However, this potentiality is often neglected by architects due to the lack of references to support design decisions. This works intends to propose architectural design guidelines for energy efficiency and thermal performance of Campus/UFRN buildings. These guidelines are based on computer simulations results using the software DesignBuilder. The definition of simulation models has begun with envelope variables, partially done after a field study of thirteen buildings at UFRN/Campus. This field study indicated some basic envelope patterns that were applied in simulation models. Occupation variables were identified with temperature and energy consumption monitoring procedures and a verification of illumination and equipment power, both developed at the Campus/UFRN administration building. Three simulation models were proposed according to different design phases and decisions. The first model represents early design decisions, simulating the combination of different types of geometry with three levels of envelope thermal performance. The second model, still as a part of early design phase, analyses thermal changes between circulation halls lateral and central and office rooms, as well as the heat fluxes and monthly temperatures in each circulation hall. The third model analyses the influence of middle-design and detail design decisions on energy consumption and thermal performance. In this model, different solutions of roofs, shading devices, walls and external colors were simulated. The results of all simulation models suggest a high influence of thermal loads due to the incidence of solar radiation on windows and surfaces, which highlights the importance of window shading devices, office room orientation and absorptance of roof and walls surfaces