Acts and joint resolutions of the General Assembly of the Commonwealth of Virginia.

Includes extra sessions.

Acts of the General Assembly of the State of Virginia, passed in 1866-67, in the ninety-first year of the Commonwealth.

Index for the Acts of 1865-66, 1866-67, and of the Extra session, 1867, at end of volume, with title: General index. Sessions 1865-6 and 1866-7.

Acts of the State of Ohio.

Includes extraordinary and special sessions.

Frequency, Form, and Distribution of Illocutionary Speech Acts in Swedish Parent-Child Interaction

In this study, young children’s development of speech acts was examined. Interaction between six Swedish-speaking parents and their children was observed. The frequency, form and distribution of speech acts in the output from the parents were compared with the frequency, form and distribution of the children’s speech acts. The frequency was measured by occurrences per analysed session. The aim of the analysis was to examine if the parent’s behaviour could be treated as a baseline for the child’s development. Both the parents’ and the children’s illocutionary speech acts were classified. Each parent-child dyad was observed at four different occasions, when the children were 1;0, 1;6, 2;0, and 2;6 years of age. Similar studies have previously shown that parents keep a consistent frequency of speech acts within a given time span of interaction, though the distribution of different types of speech acts may shift, depending on contextual factors. The form, in terms of Mean Length of Speech Act in Words (MLSAw), were correlated with the longitudinal result of the children’s MLSAw. The distribution of the parents’ speech acts showed extensive individual differences. The result showed that the children’s MLSAw move significantly closer the MLSAw of their parents. Since the parent’s MLSAw showed a wide distribution, these results indicate that the parent’s speech acts can be treated as a baseline for certain aspects of the children’s development, though further studies are needed.

Generative acts: Family and community involvement of older Australians

The article adopts a developmental approach to successful human aging by exploring the concept of generativity in relation to a study of older Australians' lived experiences of involvement in the family and community. Qualitative data, collected through focus group interviews, were analyzed interpretively using recent developments in Erikson's theory of generativity as a framework. As a result, the present study contributes an in-depth understanding of the role of generative acts to the lives of older people. The data provide illustrative support for Erikson's contention of a generativity/stagnation crisis in later life. Involvement in the family and community is seen as a productive and generative activity, which promotes a positive experience of aging. Two further emergent themes are also explored. First, the experiences of study participants illustrate the reciprocal and cyclical nature of grand-generativity, and the importance of intergenerational relationships. Finally, the data contribute to our knowledge of cultural generativity, and in particular the passing on of cultural knowledge through narratives and modeling.

Cutting management of multipurpose tree legumes: effects on green herbage production, leaf retention and water-use-efficiency during the dry season in Timor, Indonesia

Edible herbage production and water-use-efficiency of three tree legumes (Leucaena leucocephala cv. Tarramba, L. pallida x L. leucocephala (KX2) and Gliricidia sepium), cut at different times of the year (February, April, June and uncut) were compared in a semi-arid area of Timor Island, Indonesia. Cutting in the early and mid dry-season (April and June) resulted in higher total leaf production (P< 0.05) and water-use-efficiency (P< 0.05), than cutting late in the wet-season (February) or being left uncut. For the leucaena treatments removing leaf in the early to mid dry-season reduced transpiration, saving soil water for subsequent regrowth as evidenced by the higher relative water contents of leaves from these treatments. This cutting strategy can be applied to local farming conditions to increase the supply of feed for livestock during the dry season.

A comparative assessment of performance and productivity of health centres in Seychelles

Purpose - The purpose of this paper is to measure the technical and scale efficiency of health centres; to evaluate changes in productivity; and to highlight possible policy implications of the results for policy makers. Design/methodology/approach - Data envelopment analysis (DEA) is employed to assess the technical and scale efficiency, and productivity change over a four-year period among 17 public health centres. Findings - During the period of study, the results suggest that the public health centres in Seychelles have exhibited mean overall or technical efficiency of above 93 per cent. It was also found that the overall productivity increased by 2.4 per cent over 2001-2004. Research limitations/implications - Further research can be undertaken to gather data on the prices of the various inputs to facilitate an estimation of the allocative efficiency of clinics. If such an exercise were to be undertaken, researchers may also consider collecting data on quantities and prices of paramedical, administrative and support staff to ensure that the analysis is more comprehensive than the study reported in this paper. Institutionalization of efficiency monitoring would help to enhance further the already good health sector stewardship and governance. Originality/value - This paper provides new empirical evidence on a four-year trend in the efficiency and productivity of health centres in Seychelles. © Emerald Group Publishing Limited.

Impact of liberalization on efficiency and productivity of sugar industry in Kenya

Purpose – The data used in this study is for the period 1980-2000. Almost midway through this period (in 1992), the Kenyan government liberalized the sugar industry and the role of the market increased, while the government's role with respect to control of prices, imports and other aspects in the sector declined. This exposed the local sugar manufacturers to external competition from other sugar producers, especially from the COMESA region. This study aims to find whether there were any changes in efficiency of production between the two periods (pre and post-liberalization). Design/methodology/approach – The study utilized two methodologies to efficiency estimation: data envelopment analysis (DEA) and the stochastic frontier. DEA uses mathematical programming techniques and does not impose any functional form on the data. However, it attributes all deviation from the mean function to inefficiencies. The stochastic frontier utilizes econometric techniques. Findings – The test for structural differences in the two periods does not show any statistically significant differences between the two periods. However, both methodologies show a decline in efficiency levels from 1992, with the lowest period experienced in 1998. From then on, efficiency levels began to increase. Originality/value – To the best of the authors' knowledge, this is the first paper to use both methodologies in the sugar industry in Kenya. It is shown that in industries where the noise (error) term is minimal (such as manufacturing), the DEA and stochastic frontier give similar results.

Evaluation of research in efficiency and productivity:a survey and analysis of the first 30 years of scholarly literature in DEA

Since the original Data Envelopment Analysis (DEA) study by Charnes et al. [Measuring the efficiency of decision-making units. European Journal of Operational Research 1978;2(6):429–44], there has been rapid and continuous growth in the field. As a result, a considerable amount of published research has appeared, with a significant portion focused on DEA applications of efficiency and productivity in both public and private sector activities. While several bibliographic collections have been reported, a comprehensive listing and analysis of DEA research covering its first 30 years of history is not available. This paper thus presents an extensive, if not nearly complete, listing of DEA research covering theoretical developments as well as “real-world” applications from inception to the year 2007. A listing of the most utilized/relevant journals, a keyword analysis, and selected statistics are presented.

Technical efficiency:efficiency, change, technical progress and productivity growth in the national health systems of continental African countries

In May 2006, the Ministers of Health of all the countries on the African continent, at a special session of the African Union, undertook to institutionalise efficiency monitoring within their respective national health information management systems. The specific objectives of this study were: (i) to assess the technical efficiency of National Health Systems (NHSs) of African countries for measuring male and female life expectancies, and (ii) to assess changes in health productivity over time with a view to analysing changes in efficiency and changes in technology. The analysis was based on a five-year panel data (1999-2003) from all the 53 countries of continental Africa. Data Envelopment Analysis (DEA) - a non-parametric linear programming approach - was employed to assess the technical efficiency. Malmquist Total Factor Productivity (MTFP) was used to analyse efficiency and productivity change over time among the 53 countries' national health systems. The data consisted of two outputs (male and female life expectancies) and two inputs (per capital total health expenditure and adult literacy). The DEA revealed that 49 (92.5%) countries' NHSs were run inefficiently in 1999 and 2000; 50 (94.3%), 48 (90.6%) and 47 (88.7%) operated inefficiently in 2001, 2002, and 2003 respectively. All the 53 countries' national health systems registered improvements in total factor productivity attributable mainly to technical progress. Fifty-two countries did not experience any change in scale efficiency, while thirty (56.6%) countries' national health systems had a Pure Efficiency Change (PEFFCH) index of less than one, signifying that those countries' NHSs pure efficiency contributed negatively to productivity change. All the 53 countries' national health systems registered improvements in total factor productivity, attributable mainly to technical progress. Over half of the countries' national health systems had a pure efficiency index of less than one, signifying that those countries' NHSs pure efficiency contributed negatively to productivity change. African countries may need to critically evaluate the utility of institutionalising Malmquist TFP type of analyses to monitor changes in health systems economic efficiency and productivity over time. African national health systems, per capita total health expenditure, technical efficiency, scale efficiency, Malmquist indices of productivity change, DEA

Programmatic efficiency comparisons between unequally sized groups of DMUs in DEA

Data envelopment analysis (DEA) is a popular non-parametric technique for determining the efficiency of a homogeneous set of decision-making units (DMUs). In many practical cases, there is some doubt if the all the DMUs form a single group with a common efficiency distribution. The Mann-Whitney rank statistic has been used in DEA both to test if two groups of DMUs come from a common efficiency distribution and also to test if the two groups have a common frontier, each of which are likely to have important but different policy implications for the management of the groups. In this paper it is demonstrated that where the Mann-Whitney rank statistic is used for the second of these it is likely to overestimate programmatic inefficiency, particularly of the smaller group. A new non-parametric statistic is proposed for the case of comparing the efficient frontiers of two groups, which overcomes the problems we identify in the use of the Mann-Whitney rank statistic for this purpose. © 2005 Operational Research Society Ltd. All rights reserved.

Developing a decomposable measure of profit efficiency using DEA

In for-profit organizations efficiency measurement with reference to the potential for profit augmentation is particularly important as is its decomposition into technical, and allocative components. Different profit efficiency approaches can be found in the literature to measure and decompose overall profit efficiency. In this paper, we highlight some problems within existing approaches and propose a new measure of profit efficiency based on a geometric mean of input/output adjustments needed for maximizing profits. Overall profit efficiency is calculated through this efficiency measure and is decomposed into its technical and allocative components. Technical efficiency is calculated based on a non-oriented geometric distance function (GDF) that is able to incorporate all the sources of inefficiency, while allocative efficiency is retrieved residually. We also define a measure of profitability efficiency which complements profit efficiency in that it makes it possible to retrieve the scale efficiency of a unit as a component of its profitability efficiency. In addition, the measure of profitability efficiency allows for a dual profitability interpretation of the GDF measure of technical efficiency. The concepts introduced in the paper are illustrated using a numerical example.

Has DRG payment influenced the technical efficiency and productivity of diagnostic technologies in Portuguese public hospitals? An empirical analysis using parametric and non‐parametric methods

The use of Diagnosis Related Groups (DRG) as a mechanism for hospital financing is a currently debated topic in Portugal. The DRG system was scheduled to be initiated by the Health Ministry of Portugal on January 1, 1990 as an instrument for the allocation of public hospital budgets funded by the National Health Service (NHS), and as a method of payment for other third party payers (e.g., Public Employees (ADSE), private insurers, etc.). Based on experience from other countries such as the United States, it was expected that implementation of this system would result in more efficient hospital resource utilisation and a more equitable distribution of hospital budgets. However, in order to minimise the potentially adverse financial impact on hospitals, the Portuguese Health Ministry decided to gradually phase in the use of the DRG system for budget allocation by using blended hospitalspecific and national DRG casemix rates. Since implementation in 1990, the percentage of each hospitals budget based on hospital specific costs was to decrease, while the percentage based on DRG casemix was to increase. This was scheduled to continue until 1995 when the plan called for allocating yearly budgets on a 50% national and 50% hospitalspecific cost basis. While all other nonNHS third party payers are currently paying based on DRGs, the adoption of DRG casemix as a National Health Service budget setting tool has been slower than anticipated. There is now some argument in both the political and academic communities as to the appropriateness of DRGs as a budget setting criterion as well as to their impact on hospital efficiency in Portugal. This paper uses a twostage procedure to assess the impact of actual DRG payment on the productivity (through its components, i.e., technological change and technical efficiency change) of diagnostic technology in Portuguese hospitals during the years 1992–1994, using both parametric and nonparametric frontier models. We find evidence that the DRG payment system does appear to have had a positive impact on productivity and technical efficiency of some commonly employed diagnostic technologies in Portugal during this time span.

The synthesis of a ferromagnetic polymer

The aim of this study was to prepare a ferromagnetic polymer using the design elements of molecular magnets. This involved the preparation of co-polyradicals of phenylacetylenes bearing nitronyl nitroxides and nitro/cyano groups. The magnetic properties of the materials were determined using a SQUID magnetometer. A novel rhodium catalyst, Rh(NBD)(NH3)Cl, was prepared in order to obtain good yields of polymerisation. A wide range of substituted phenylacetylenes were first homopolymerised in order to assess the efficiency of the catalyst. Yields were generally high, between 75% and 98%, and the time of polymerisation was short (one hour). SEC analysis revealed that the Mw of the polymers were in the range of 200,000 and 250,000. The discovery that phenylboronic acid acts a co-catalyst for the polymerisation served to increase the yields by 10% to 20% but the Mw of the polymers was reduced to approximately 100,000. Co-polyradicals were prepared in good to excellent yield using the new catalyst. The magnetic properties in the temperature range of 300K to 1.8K were investigated by SQUID, which revealed a spin glass system, antiferromagnets and possible dipolar magnets. Short-range ferromagnetic interactions between 300K and 100K were found in a co-polyradical containing nitronyl nitroxide and cyano substituted monomers. The magnetic properties were dependent upon both the type of monomers utilised and the ratio between them. The effects of ring substituents on the terminal alkyne have been studied by carbon-13 NMR. There was no correlation however, between the chemical shift of terminal alkyne and the polymerisability of the monomer.

The ecology of percolating filters containing a plastic filter medium in relation to their efficiency in The treatment of domestic sewage

The suitability of a new plastic supporting medium for biofiltration was tested over a three year period. Tests were carried out on the stability, surface properties, mechanical strength, and dimensions of the medium. There was no evidence to suggest that the medium was deficient in any of these respects. The specific surface (320m2m-3) and the voidage (94%) of the new medium are unlike any other used in bio-filtration and a pilot plant containing two filters was built to observe its effects on ecology and performance. Performance was estimated by chemical analysis and ecology studied by film examination and fauna counts. A system of removable sampling baskets was designed to enable samples to be obtained from two intermediate depths of filter. One of the major operating problems of percolating filters is excessive accumulation of film. The amount of film is influenced by hydraulic and organic load and each filter was run at a different loading. One was operated at 1.2m3m-3day-1 (DOD load 0.24kgm-3day-1) judged at the time to be the lowest filtration rate to offer advantages over conventional media. The other filter was operated at more than twice this loading (2.4m3m-3day-lBOD load 0.55kgm-3day-1) giving a roughly 2.5x and 6x the conventional loadings recommended for a Royal Commission effluent. The amount of film in each filter was normally low (0.05-3kgm(3 as volatile solids) and did not affect efficiency. The evidence collected during the study indicated that the ecology of the filters was normal when compared with the data obtained from the literature relating to filters with mineral media. There were indications that full ecological stability was yet to be reached and this was affecting the efficiency of the filters. The lower rate filter produced an average 87% BOD removal giving a consistent Royal Commission effluent during the summer months. The higher rate filter produced a mean 83% BOD removal but at no stage a consistent Royal Commission effluent. From the data on ecology and performance the filters resembled conventional filters rather than high rate filters.