Use of Two-Part Regression Calibration Model to Correct for Measurement Error in Episodically Consumed Foods in a Single-Replicate Study Design: EPIC Case Study.

In epidemiologic studies, measurement error in dietary variables often attenuates association between dietary intake and disease occurrence. To adjust for the attenuation caused by error in dietary intake, regression calibration is commonly used. To apply regression calibration, unbiased reference measurements are required. Short-term reference measurements for foods that are not consumed daily contain excess zeroes that pose challenges in the calibration model. We adapted two-part regression calibration model, initially developed for multiple replicates of reference measurements per individual to a single-replicate setting. We showed how to handle excess zero reference measurements by two-step modeling approach, how to explore heteroscedasticity in the consumed amount with variance-mean graph, how to explore nonlinearity with the generalized additive modeling (GAM) and the empirical logit approaches, and how to select covariates in the calibration model. The performance of two-part calibration model was compared with the one-part counterpart. We used vegetable intake and mortality data from European Prospective Investigation on Cancer and Nutrition (EPIC) study. In the EPIC, reference measurements were taken with 24-hour recalls. For each of the three vegetable subgroups assessed separately, correcting for error with an appropriately specified two-part calibration model resulted in about three fold increase in the strength of association with all-cause mortality, as measured by the log hazard ratio. Further found is that the standard way of including covariates in the calibration model can lead to over fitting the two-part calibration model. Moreover, the extent of adjusting for error is influenced by the number and forms of covariates in the calibration model. For episodically consumed foods, we advise researchers to pay special attention to response distribution, nonlinearity, and covariate inclusion in specifying the calibration model.

Ecological correlations between food availability and mortality: more than you can eat?

Introduction: There is little information regarding the impact of diet on disease incidence and mortality in Switzerland. Objectives: We aimed at assessing the associations between food availability and disease using ecological correlations. Methods: Time-trend ecologic study for period 1970 to 2009. Food availability was measured through the FAO food balance sheets. Standardized mortality rates (SMRs) were obtained from the Swiss Federal Office of Statistics. Cancer incidence data was obtained from the WHO Health for all database and the Vaud cancer registry. Association between food availability and mortality/incidence was assessed at lags 0, 5, 10 and 15 years by Spearman correlation. Results: Alcoholic beverages and fruit availability were positively associated with SMRs from all types of cardiovascular disease, while fish availability was negatively associated. Animal products, meat and animal fats were positively associated with SMR from ischemic heart disease only. For cancers, opposite results were found whether the association used SMRs or incidence rates. For all cancers, alcoholic beverages and fruits were positively associated with SMRs but negatively associated with incidence rates. Similar findings were obtained for all other foods, with the exception of vegetables, which were weakly and negatively associated with SMRs and incidence rates. Finally, a 15 years lag time reversed the association for animal and vegetal products, weakened the association for alcohol and fruits and strengthened the association for fish. Conclusion: Ecologic associations between food availability and disease vary considerably whether mortality or incidence rates are used. Great care should be taken when interpreting the results.

Ideas, Possibilities and Limitations of Sustainable Economic Policy – the Example of Ecological Economics

A mesura que el suport del creixement econòmic constitueix un objectiu fonamental de la formulació de polítiques econòmiques, cal assenyalar que aquest tipus de creixement està limitat naturalment per un planeta finit. Aquest article argumenta que, des del punt de vista de la justícia intergeneracional, la realització d'un concepte de desmaterialització i, com a efecte, d'una economia que no creix (en el sentit de dissociació absoluta del creixement econòmic i consum d'energia i materials) es pot justificar. Per tant, el creixement pot ser també entesa com la millora de la qualitat de vida sobretot en comptes d'ampliar quantitats escarpats de sortida. Per tant, una dràstica reducció del cabal de material es necessita, sobretot en els països d'alts ingressos. Després de presentar alguns crítica de les propostes, en el focus d'aquest article es dibuixen en els arguments de per què la política econòmica en el futur han de ser etiquetats com "ecològic" i, a continuació, les opcions de posar en acció les idees del teòric presentat marc en tasques manejables polítiques seran discutides. En aquest cas, s'argumentarà que l'enfocament clàssic de internalització d'efectes externs sovint seguides de decisions de política econòmica ortodoxa no és completament capaç de reflectir canvis ecològics en les estructures de preus dels mercats. Per tant, formal (industrial i l'establiment de la política de consum) i institucions informals (llars) representen punts clau de la política econòmica sostenible, assenyalant l'individu com així com la responsabilitat col · lectiva per omplir aquest buit substancial.

Computational drug design strategies applied to the modelling of human immunodeficiency virus-1 reverse transcriptase inhibitors

Reverse transcriptase (RT) is a multifunctional enzyme in the human immunodeficiency virus (HIV)-1 life cycle and represents a primary target for drug discovery efforts against HIV-1 infection. Two classes of RT inhibitors, the nucleoside RT inhibitors (NRTIs) and the nonnucleoside transcriptase inhibitors are prominently used in the highly active antiretroviral therapy in combination with other anti-HIV drugs. However, the rapid emergence of drug-resistant viral strains has limited the successful rate of the anti-HIV agents. Computational methods are a significant part of the drug design process and indispensable to study drug resistance. In this review, recent advances in computer-aided drug design for the rational design of new compounds against HIV-1 RT using methods such as molecular docking, molecular dynamics, free energy calculations, quantitative structure-activity relationships, pharmacophore modelling and absorption, distribution, metabolism, excretion and toxicity prediction are discussed. Successful applications of these methodologies are also highlighted.

Let's talk: how communication affects contract design

We study experimentally how the ability to communicate affects the frequency and effectiveness of flexible and inflexible contracts in a bilateral trade context where sellers can adjust trade quality after observing a post-contractual cost shock and a discretionary buyer transfer. In the absence of communication, we find that rigid contracts are more frequent and lead to higher earnings for both buyer and seller. By contrast, in the presence of communication, flexible contracts are much more frequent and considerably more productive, both for buyers and sellers. Also, both buyer and seller earn considerably more from flexible with communication than rigid without communication. Our results show quite strongly that communication, a normal feature in contracting, can remove the potential cost of flexibility (disagreements caused by conflicting perceptions). We offer an explanation based on social norms.

El proyecto EMECAM: Estudio Multicéntrico Español sobre la Relación entre la Contaminación Atmosférica y la Mortalidad. Antecedentes, participantes, objetivos y métodología.

In recent years, a growing number of studies suggests that increases in air pollution levels may have short-term impact on human health, even at pollution levels similar to or lower than those which have been considered to be safe to date. The different methodological approaches and the varying analysis techniques employed have made it difficult to make a direct comparison among all of the findings, preventing any clear conclusions from being drawn. This has led to multicenter projects such as the APHEA (Short-Term Impact of Air Pollution on Health. A European Approach) within a European Scope. The EMECAM Project falls within the context of the aforesaid multicenter studies and has a wide-ranging projection nationwide within Spain. Fourteen (14) cities throughout Spain were included in this Project (Barcelona, Metropolitan Area of Bilbao, Cartagena, Castellón, Gijón, Huelva, Madrid, Pamplona, Seville, Oviedo, Valencia, Vigo, Vitoria and Saragossa) representing different sociodemographic, climate and environmental situations, adding up to a total of nearly nine million inhabitants. The objective of the EMECAM project is that to asses the short-term impact of air pollution throughout all of the participating cities on the mortality for all causes, on the population and on individuals over age 70, for respiratory and cardiovascular design causes. For this purpose, with an ecological, the time series data analyzed taking the daily deaths, pollutants, temperature data and other factors taken from records kept by public institutions. The period of time throughout which this study was conducted, although not exactly the same for all of the cities involved, runs in all cases from 1990 to 1996. The degree of relationship measured by means of an autoregressive Poisson regression. In the future, the results of each city will be combined by means of a meta-analysis.

Possible solution of some essential zero problems in compositional data analysis

One of the tantalising remaining problems in compositional data analysis lies in how to deal with data sets in which there are components which are essential zeros. By anessential zero we mean a component which is truly zero, not something recorded as zero simply because the experimental design or the measuring instrument has not been sufficiently sensitive to detect a trace of the part. Such essential zeros occur inmany compositional situations, such as household budget patterns, time budgets,palaeontological zonation studies, ecological abundance studies. Devices such as nonzero replacement and amalgamation are almost invariably ad hoc and unsuccessful insuch situations. From consideration of such examples it seems sensible to build up amodel in two stages, the first determining where the zeros will occur and the secondhow the unit available is distributed among the non-zero parts. In this paper we suggest two such models, an independent binomial conditional logistic normal model and a hierarchical dependent binomial conditional logistic normal model. The compositional data in such modelling consist of an incidence matrix and a conditional compositional matrix. Interesting statistical problems arise, such as the question of estimability of parameters, the nature of the computational process for the estimation of both the incidence and compositional parameters caused by the complexity of the subcompositional structure, the formation of meaningful hypotheses, and the devising of suitable testing methodology within a lattice of such essential zero-compositional hypotheses. The methodology is illustrated by application to both simulated and real compositional data

Enterprise Architecture Management Design: Towards Understanding Organizational Contingencies, Design Principles and Effectiveness

Despite the increasing popularity of enterprise architecture management (EAM) in practice, many EAM initiatives either do not fully meet the expected targets or fail. Several frameworks have been suggested as guidelines to EA implementation, but companies seldom follow prescriptive frameworks. Instead, they follow very diverse implementation approaches that depend on their organizational contingencies and the way of adopting and evolving EAM over time. This research strives for a broader understanding of EAM by exploring context-dependent EAM adoption approaches as well as identifying the main EA principles that affect EA effectiveness. Based on two studies, this dissertation aims to address two main questions: (1) EAM design: Which approaches do companies follow when adopting EAM? (2) EA principles and their impact: What impact does EA principles have on EA effectiveness/quality? By utilizing both qualitative and quantitative research methods, this research contributes to exploring different EAM designs in different organizational contingencies as well as using EA principles as an effective means to achieve principle-based EAM design. My research can help companies identify a suitable EAM design that fits their organizational settings and shape their EA through a set of principles.

A Tool for optimum design of Waste Water Treatment Plants under uncertainty

L’objectiu principal és presentar un nou prototipus d’eina per al disseny de les plantes de tractament d’aigües residuals utilitzant models mecànics dinàmics quantificant la incertesa

RTM mould design and construction for a DN 50 PN 16 flansch

The objective of this project consists of designing and constructing a RTM mould for a loose flange of glass fibre reinforced plastic (GRP). The design phase has the mission to realise a quality and simple design of the RTM mould, with the objective to obtain an easy and economic phase of construction and the more possible great characteristics of the loose flange. In fact this RTM mould will be a mould prototype, which will be developed in the future to obtain an RTM mould able to support a loose flange production. Therefore when more steps are developed in this project, then the future objective will be near

SwissBioisostere: a database of molecular replacements for ligand design.

The SwissBioisostere database (http://www.swissbioisostere.ch) contains information on molecular replacements and their performance in biochemical assays. It is meant to provide researchers in drug discovery projects with ideas for bioisosteric modifications of their current lead molecule, as well as to give interested scientists access to the details on particular molecular replacements. As of August 2012, the database contains 21 293 355 datapoints corresponding to 5 586 462 unique replacements that have been measured in 35 039 assays against 1948 molecular targets representing 30 target classes. The accessible data were created through detection of matched molecular pairs and mining bioactivity data in the ChEMBL database. The SwissBioisostere database is hosted by the Swiss Institute of Bioinformatics and available via a web-based interface.

Analysis and Design of a secure WLAN solution for Cobre Las Cruces

Cobre Las Cruces is a renowned copper mining company located in Sevilla, with unexpected problems in wireless communications that have a direct affectation in production. Therefore, the main goals are to improve the WiFi infrastructure, to secure it and to detect and prevent from attacks and from the installation of rogue (and non-authorized) APs. All of that integrated with the current ICT infrastructure.This project has been divided into four phases, although only two of them have been included into the TFC; they are the analysis of the current situation and the design of a WLAN solution.Once the analysis part was finished, some weaknesses were detected. Subjects such as lack of connectivity and control, ignorance about installed WiFi devices and their localization and state and, by and large, the use of weak security mechanisms were some of the problems found. Additionally, due to the fact that the working area became larger and new WiFi infrastructures were added, the first phase took more time than expected.As a result of the detailed analysis, some goals were defined to solve and it was designed a centralized approach able to cope with them. A solution based on 802.11i and 802.1x protocols, digital certificates, a probe system running as IDS/IPS and ligthweight APs in conjunction with a Wireless LAN Controller are the main features.

Design of potent inhibitors of human RAD51 recombinase based on BRC motifs of BRCA2 protein: modeling and experimental validation of a chimera peptide.

We have previously shown that a 28-amino acid peptide derived from the BRC4 motif of BRCA2 tumor suppressor inhibits selectively human RAD51 recombinase (HsRad51). With the aim of designing better inhibitors for cancer treatment, we combined an in silico docking approach with in vitro biochemical testing to construct a highly efficient chimera peptide from eight existing human BRC motifs. We built a molecular model of all BRC motifs complexed with HsRad51 based on the crystal structure of the BRC4 motif-HsRad51 complex, computed the interaction energy of each residue in each BRC motif, and selected the best amino acid residue at each binding position. This analysis enabled us to propose four amino acid substitutions in the BRC4 motif. Three of these increased the inhibitory effect in vitro, and this effect was found to be additive. We thus obtained a peptide that is about 10 times more efficient in inhibiting HsRad51-ssDNA complex formation than the original peptide.

An alternative socio-ecological strategy? International Trade Unions' engagement with climate change

In the context of a global ecological crisis, it is an important move when trade unions turn to environmentalism. Yet, the form that this environmentalism takes is often overlooked. This is especially the case with international trade unions. Based on an empirical study of international trade unions' engagement with the climate change issue, this article argues that international trade unions follow three different (and partially conflicting) strategies. I label these strategies as 'deliberative', 'collaborative growth' and 'socialist', and I examine each in turn. I argue that such analysis is important if we want to identify the potential for transforming the social relations of production that are at the root of the current climate crisis, and for identifying an alternative socio-ecological strategy.

The building blocks of international ecological footprint inequality: a regression-based decomposition

This paper performs an empirical Decomposition of International Inequality in Ecological Footprint in order to quantify to what extent explanatory variables such as a country’s affluence, economic structure, demographic characteristics, climate and technology contributed to international differences in terms of natural resource consumption during the period 1993-2007. We use a Regression-Based Inequality Decomposition approach. As a result, the methodology extends qualitatively the results obtained in standard environmental impact regressions as it comprehends further social dimensions of the Sustainable Development concept, i.e. equity within generations. The results obtained point to prioritizing policies that take into account both future and present generations.