A snapshot of Australian nurse practitioners’ extended practice activities

Introduction The Australian Nurse Practitioner Project (AUSPRAC) was initiated to examine the introduction of nurse practitioners into the Australian health service environment. The nurse practitioner concept was introduced to Australia over two decades ago and has been evolving since. Today, however, the scope of practice, role and educational preparation of nurse practitioners is well defined (Gardner et al, 2006). Amendments to specific pre-existing legislation at a State level have permitted nurse practitioners to perform additional activities including some once in the domain of the medical profession. In the Australian Capital Territory, for example 13 diverse Acts and Regulations required amendments and three new Acts were established (ACT Health, 2006). Nurse practitioners are now legally authorized to diagnose, treat, refer and prescribe medications in all Australian states and territories. These extended practices differentiate nurse practitioners from other advanced practice roles in nursing (Gardner, Chang & Duffield, 2007). There are, however, obstacles for nurse practitioners wishing to use these extended practices. Restrictive access to Medicare funding via the Medicare Benefit Scheme (MBS) and the Pharmaceutical Benefit Scheme (PBS) limit the scope of nurse practitioner service in the private health sector and community settings. A recent survey of Australian nurse practitioners (n=202) found that two-thirds of respondents (66%) stated that lack of legislative support limited their practice. Specifically, 78% stated that lack of a Medicare provider number was ‘extremely limiting’ to their practice and 71% stated that no access to the PBS was ‘extremely limiting’ to their practice (Gardner et al, in press). Changes to Commonwealth legislation is needed to enable nurse practitioners to prescribe medication so that patients have access to PBS subsidies where they exist; currently patients with scripts which originated from nurse practitioners must pay in full for these prescriptions filled outside public hospitals. This report presents findings from a sub-study of Phase Two of AUSPRAC. Phase Two was designed to enable investigation of the process and activities of nurse practitioner service. Process measurements of nurse practitioner services are valuable to healthcare organisations and service providers (Middleton, 2007). Processes of practice can be evaluated through clinical audit, however as Middleton cautions, no direct relationship between these processes and patient outcomes can be assumed.

Community engagement and groundwater investigation in a rural/peri urban basaltic aquifier system, Tamborine Mountain, South East Queensland

The Tamborine Mt area is a popular residential and tourist area in the Gold Coast hinterland, SE Qld. The 15km2 area occurs on elevated remnant Tertiary Basalts of the Beechmont Group, which comprise a number of mappable flow units originally derived from the Tweed volcanic centre to the south. The older Albert Basalt (Tertiary), which underlies the Beechmont Basalt at the southern end of the investigation area, is thought to be derived from the Focal Peak volcanic centre to the south west. The Basalts contain a locally significant ‘un-declared’ groundwater resource, which is utilised by the Tamborine Mt community for: • domestic purposes to supplement rainwater tank supplies, • commercial scale horticulture and • commercial export off-Mountain for bottled water. There is no reticulated water supply, and all waste water is treated on-site through domestic scale WTPs. Rainforest and other riparian ecosystems that attract residents and tourist dollars to the area, are also reliant on the groundwater that discharges to springs and surface streams on and around the plateau. Issues regarding a lack of compiled groundwater information, groundwater contamination, and groundwater sustainability are being investigated by QUT, utilising funding provided by the Federal Government’s ‘Caring for our Country’ programme through SEQ Catchments Ltd. The objectives of the two year project, which started in April 2009, are to: • Characterise the nature and condition of groundwater / surface water systems in the Tamborine Mountain area in terms of the issues being raised; • Engage and build capacity within the community to source local knowledge, encourage participation, raise awareness and improve understanding of the impacts of land and water use; • Develop a stand-alone 3D Visualisation model for dissemination into the community and use as a communication tool.

Multicultural education, global studies and studies of Asia

Like other nations, Australia has experienced significant change in the past few decades as its society has become increasingly diverse. The new cultures and traditions that result from ethnic and religious diversity have both enriched Australian society and presented it with some challenges. Other challenges have resulted from increased globalisation. For example, the economic fallout from the recent global financial crisis indicates that global issues can impact across a range of levels, from multinational corporations and nation-states to local sites and individual livelihoods. Some suggest that Australia fared better than other nations during this economic crisis because of its export trade with China. Although this is disputed by economists, it highlights another facet of change that is impacting on Australian society and this relates to Australia’s growing engagement with the nations of Asia. There is increasing awareness in education systems that if young people are to achieve their potential as future citizens they need to be able to negotiate the cultural, social, political and economic ties that connect them to the global and regional community through work, leisure and citizenship. Multicultural education, global studies and studies of Asia play a particular part in helping young people to: • appreciate cultural diversity within and beyond their own nation • imagine with some accuracy how others view their world • participate in shaping a better future. This chapter explores the origins, distinctions and common features of each approach.

Advertising and Celebrity Endorsement in Burma

Burma (or Myanmar) is not a place that people normally associate with the glamour of film stars, or the fun and frivolity of celebrities, unlike in neighbouring India or Thailand. But each year the very matter-of-factly named ‘Myanmar Economics Import/Export VCD’ company produces a disk of the year’s most memorable television ads, showcasing some of the many Burmese celebrities on television at the moment. As a testament to the catchiness of the ads, disks have become so popular that they can be bought on street corners in Yangon for about 1000 Kyats (US$1). Though advertising in Burma is highly vetted for political content, much like film and print media, the samples featured show a surprising array of entertaining themes and ideas. Much of television advertising, in some way or another, draws upon the profiles of versatile Burmese celebrities to engage and build brand value.

Geometric and force relationships for the development of a scaled model hydraulic excavator

Hydraulic excavators in the mining industry are widely used owing to the large payload capabilities these machines can achieve. However, there are very few optimisation studies for producing efficient hydraulic excavator backets. An efficient bucket can avoid unnecessary weight; greatly influence the payload and optimise the efficiency of hydraulic mining excavators. This paper presents a framework for the development of a scaled hydraulic excavator by examining the geometry and force relationships. A small hydraulic excavator was purchased and fitted with a broom scaled to a factor. Geometric and force relationships of the model were derived to assist computer instrumentation to retrieve necessary variable input for bucket design.

Reverse engineering and finite element analysis of a 3-wheeler automotive structure

Auto rickshaws (3-wheelers) are the most sought after transport among the urban and rural poor in India. The assembly of the vehicle involves assemblies of several major components. The L-angle is the component that connects the front panel with the vehicle floor. Current L-angle part has been observed to experience permanent deformation failure over period of time. This paper studies the effect of the addition of stiffeners on the L-angle to increase the strength of the component. A physical model of the L-angle was reversed engineered and modelled in CAD before static loading analysis were carried out on the model using finite element analysis. The modified L-angle fitted with stiffeners was shown to be able to withstand more load compare to previous design.

Diffusion of business improvement processes in manufacturing companies in India

Manufacturing organisations spend more on Business Process Improvement initiatives to make them more competitive in growing global market. This paper presents a Rapid Improvement Workshop (RIW) framework which companies can used to identify the critical factors regulating the diffusion of business process improvement in their company. The framework can then be used address how process improvement can be efficiently implemented. We use the results from case studies at Caterpillar India. The paper identifies the critical factors that contribute to the successful implementation of process improvement programs in manufacturing organisations. We further identify certain technological and cultural barriers to the implementation of process improvement programs and how Indian manufacturing companies can overcome these barriers to attain competitive advantage in the global markets.

Measuring the performance of Customs Information Systems (CIS) in Malaysia

In the scope of this study, ‘performance measurement’ includes the collection and presentation of relevant information that reflects progress in achieving organisational strategic aims and meeting the needs of stakeholders such as merchants, importers, exporters and other clients. Evidence shows that utilising information technology (IT) in customs matters supports import and export practices and ensures that supply chain management flows seamlessly. This paper briefly reviews some practical techniques for measuring performance. Its aim is to recommend a model for measuring the performance of information systems (IS): in this case, the Customs Information System (CIS) used by the Royal Malaysian Customs Department (RMCD).The study evaluates the effectiveness of CIS implementation measures in Malaysia from an IT perspective. A model based on IS theories will be used to assess the impact of CIS. The findings of this study recommend measures for evaluating the performance of CIS and its organisational impacts in Malaysia. It is also hoped that the results of the study will assist other Customs administrations evaluate the performance of their information systems.

Exporting educational services : an Australian university’s experience in delivering offshore project management programs

Increasingly, Australian universities are facing the challenges of global education. While overseas students studying in Australia provide the primary source of export earnings for educational institutions, a number of institutions, including QUT, are also involved in international trade in educational services by providing services offshore. This paper discusses driving forces behind moves by Australian universities to enter the international education market. It then briefly describes Queensland University of Technology’s internationalisation strategy. The paper concludes with a case study describing how the School of Construction Management has pioneered the development of offshore courses at QUT. The introduction of the Master of Project Management and Graduate Diploma of Project Management programs in Singapore in November 1993 represented QUT’s first experience in this area. With the experience of 18 months of operation, the School now has the opportunity to reflect on the outcomes of this venture and consider future options.

Strategic technology management : case study development in innovative building products

National and international competition demands that Australian organisations become more competent at making the strategic technological decisions that impact their future in the international business economy. A new subject unit, Management of Technology is now offered in the popular Master of Project Management and Master of Business Administration programs at the Queensland University of Technology. This cross-disciplinary subject provides students with a theoretical foundation and practical tools to improve the efficiency and competitiveness of technically-oriented organisations. Applied case studies—shown to be the most appropriate mode of learning for mature-age students—form an integral component of the teaching program. In the first offerings of this subject during 1995 and 1996, American case studies were used. QUT has now supported the development of Australian case study packages for technology management through its Teaching and Learning Grants Scheme. The first case developed—Inland Oil Refiners’ Microstill Project—was completed in early 1996. A newly developed case—Automated Door Opening System for Wheelchair Access—is currently being completed. This case (comprising case study documentation and video presentation) tracks a cross-disciplinary product development driven by legislative and community pressures. It also reinforces the importance of personal relationships in the technology and business development that has taken this young Brisbane-based company from its embryonic beginnings on the Queensland Cultural Centre in 1994 to a national and export-focussed organisation in 1997. This paper reviews the need to develop Australian case material in Management of Technology, discusses the case study documentation and supporting video developed, and application of the case study approach in this teaching initiative in QUT’s Master of Project Management and Master of Business Administration programs.

Regulating for Sustainability : Property Issues

All Australian governments recognize the need to ensure that land and natural resources are used sustainably. In this context, ‘resources’ includes natural resources found on land such as trees and other vegetation, fauna, soil and minerals, and cultural resources found on land such as archaeological sites and artefacts. Regulators use a wide range of techniques to promote sustainability. To achieve their objectives, they may, for example, create economic incentives through bounties, grants and subsidies, encourage the development of self-regulatory codes, or enter into agreements with landowners specifying how the land is to be managed. A common way of regulating is by making administrative orders, determinations or decisions under powers given to regulators by Acts of Parliament (statutes) or by regulations (delegated legislation). Generally the legislation provides for specified rights or duties, and authorises a regulator to make an order or decision to apply the legislative provisions to particular land or cases. For example, legislation might empower a regulator to make an order that requires the owner of a contaminated site to remediate it. When the regulator exercises the power by making an order in relation to particular land, the owner is placed under a statutory duty to remediate. When regulators exercise their statutory powers to manage the use of private land or natural or cultural resources on private land, property law issues can arise. The owner of land has a private property right that the law will enforce against anybody else who interferes with the enjoyment of the right, without legal authority to do so. The law dealing with the enforcement of private property rights forms part of private law. This report focuses on the relationship between the law of private property and the regulation of land and resources by legislation and by administrative decisions made under powers given by legislation (statutory powers).

Parent decisions regarding paid work and care of the child

Australia has witnessed a continual increase in maternal employment over the past two decades, which has placed focus on child care- its effects on the child and on early childhood education and care policy and provision. The engagement of women in the paid workforce contributes to national economic development, and is recognised in government policy incentives such as cash subsidies and tax relief for child care fees. These incentives are targeted towards mothers, to encourage them to engage in paid work. Making a contribution to the family’s economy and to a mother’s economic self sufficiency are two key drivers for women’s engagement in satisfying paid work. Many women also seek to maintain a personal investment in the development of their career, simultaneously ensuring that the child is experiencing suitable care. Policies that support women’s choices for satisfying workforce engagement and care arrangements are prudent for ensuring productivity of the economy as well as for enhancing the wellbeing of parents and children (OECD, 2007). Policies that provide family friendly employment arrangements, paid parental leave, and child care support, directly affect maternal employment decisions. Availability of family friendly employment policies is viewed as one way to not only promote gender equity in employment opportunities but also support the wellbeing of children and families (OECD, 2007). Yet there are not comprehensive and coherent policies on work and family in Australia. Australia is due to implement its first paid parental leave scheme in January, 2011. At the time of the data collection of this research, June 2007 to December 2008, Australia had no statutory provision for paid parental leave. To date, most research has focused on the consequences of paid work and care decisions made by women. Far less is known about the processes of decision-making and reasons underlying women’s choices. Investigation of what is most salient for women as they make decisions regarding engagement in paid work, and care for their child is important in order to inform policy and practices related to parental leave, family friendly employment and care for the child. This prospective longitudinal research was of 124 Australian expectant first-time mothers who completed questionnaires in their third trimester of pregnancy, and again at six and twelve months postpartum. First-time expectant mothers' decisions regarding engaging in paid work and selecting care for their child represent those of a group who are invested in motherhood and have usually had direct experience of engaging in paid work. They therefore provide an important insight into society’s idealised views about motherhood and the emotional and social uncertainty of making personal decisions where the consequences of such decisions are unknown. These decisions reflect public beliefs about the role of women in contributing to the country’s productivity and decisions about providing for the economic and emotional care needs of their family. As so little is known about the reasoning and processes of decision-making of women’s choices regarding paid work and care of the child this research was designed to capture expectant first-time mother’s preferred options for engaging in paid work and the care of their child, and investigate their actual decisions made at six and 12 months postpartum. To capture preferred options, decisions and outcomes of decisions regarding paid work and care of the child a prospective longitudinal research design was utilised. This design had three important components that addressed key limitations in the extant literature. First the research commenced in pregnancy in order to investigate preferences and beliefs about paid work and care and to examine baseline data that may influence decisions made as the women returned to paid work. Second the research involved longitudinal tracking from the antenatal time point to six and 12 months postpartum in order to identify the influences on decisions made. Third the research measured outcomes of the decisions made at each time point. This research examined the intentions, preferences, beliefs, influences, and outcomes of the decisions about engagement in paid work and choice of care. The analyses examined factors predicting return to paid work, the timing of return and extent of engagement in paid work; the care for the child; satisfaction with paid work; satisfaction with care for the child, motherhood and fulfilment; and maternal wellbeing at six and 12 months postpartum. The factors of interest were both rational/economic (availability and extent of paid and unpaid maternity leave; flexible work patterns) and emotional/affective (career satisfaction, investment in motherhood, and concern with quality of care for the child). Results indicated a group preference, and realisation for, return to paid work within the first year after the birth of a child but with reduction in hours to part-time. Most women saw paid work not only as a source of income but also as source of personal satisfaction. There were four key themes arising from this research. First, the women strived to feel emotionally secure when deciding about engaging in paid work and care of the child. To achieve emotional security women made their decisions for paid work and care of the child differently. A woman’s decision for maternal employment is a function of her personal beliefs, preferences and context regarding paid work and care of the child. She adjusts her established work identity with her new identity as a mother. The second key theme from this research is that the women made their decisions for maternal employment in response to their personal context and there were different levels of opportunities between the women’s choices. There is inequity of entitlement regarding work conditions associated with a woman’s education level. This has implications for the woman’s engagement in paid work, and her child’s health and wellbeing. The third key theme is that the quality of the child’s care mattered to the women in the research. They preferred care provided by parents and/or relatives more than any other types of care. The fourth key theme identified that satisfaction and wellbeing outcomes experienced as a result of maternal employment decisions were a complex interaction between multiple factors that change across time with the ongoing development of the mother’s identity, and the development of the child. The implications for policy within Australia are that the employment of mothers in the workforce necessitates that non-parental care becomes a public concern, where there is universal access to good quality affordable care for every child, not just for those who can afford it. This is equitable and represents real choice while supporting the rights of the child (Thorpe, Cloney & Tayler, 2010), protecting and promoting the public interest (Cleveland & Krashinsky, 2010). Children’s health and wellbeing will be supported (Moore & Oberklaid, 2010) while children are in non-parental care, and they will be exposed to environments and experiences that support their learning and development. The significant design of the research enabled the trajectories of first-time expectant women to be tracked from the antenatal point to 12 months postpartum. But there were limitations: the small sample size, the over-representation of the sample being highly educated and the nature of a longitudinal research that is set within the economic, social and political context at that time. These limitations are discussed in relation to suggestions for future research.