Evaluation eines humanisierten Mausmodells der allergischen Atemwegsentzündung

Aus der zunehmenden Prävalenz allergischer Erkrankungen vor allem in den Industrienationen ergibt sich ein erhöhter Bedarf an Grundlagenforschung im Bereich von Allergie und Asthma sowie der Entwicklung innovativer Therapiestrategien. In der vorliegenden Dissertation wurden die immundefizienten Mausstämme NOD-Scid und NOD-Scid gc als vielversprechender translationaler Schritt zwischen dem reinen Tiermodell und der Erprobung neuer Therapieansätze an Probanden in klinischen Studien beleuchtet. Im experimentellen Verlauf der Arbeit wurde ein humanisiertes Mausmodell der allergischen Atemwegsentzündung zunächst in immundefizienten NOD-Scid und darauffolgend in NOD-Scid gc Mäusen etabliert. Diese Mausstämme zeichnen sich durch das Nichtvorhandensein von B- und T-Zellen aus. Im NOD-Scid gc Stamm resultiert aus einer zusätzlichen Mutation des Gens für die gamma-Kette des IL-2 Rezeptors der Verlust von natürlichen Killerzellen (NK-Zellen), was die Immunität in diesem Stamm weiter herabsetzt und eine Humanisierung erleichtert. Die Humanisierung der Mäuse erfolgte durch die intraperitoneale Injektion von mononukleären Zellen des peripheren Blutes (PBMCs), die unter Anwendung der Ficoll-Dichtezentrifugation aus dem Blut von Probanden isoliert wurden. Für die Gewinnung der PBMCs wurden zum einen Asthma-Patienten mit einer hochgradigen Sensibilisierung gegen Birkenpollen herangezogen. Zum anderen wurden in Kontrollexperimenten PBMCs nicht-allergischer Probanden verwendet. Während sich für den NOD-Scid Stamm 80 Millionen PBMCs als angemessene Transferzahl erwiesen, reichten für die Rekonstitution des NOD-Scid gc Stammes 5 Millionen PBMCs aus. Eine Analyse der Tiere erfolgte 24 Tage nach Injektion der humanen Zellen. Der Transfer der PBMCs allergischer Asthmatiker führte besonders nach additiver Applikation des Birkenallergens sowie des humanen rekombinanten Zytokins IL-4 und darauffolgender nasaler allergener Provokation zu einer starken pulmonalen Entzündung in den Mäusen. Die nasale Allergenprovokation an den Tagen 20-22 nach PBMC-Transfer erwies sich für das Aufkommen der Inflammation als unbedingt erforderlich. Die nasale Provokation mit Phosphat-gepufferter Salzlösung (PBS) mündete in einer herabgesetzten Inflammation ohne Ausprägung einer Atemwegsüberempfindlichkeit (AHR), reduzierten Zellzahlen in der bronchoalveolären Lavage (BAL) sowie verminderten Frequenzen humaner Zellen in den Lungen von Versuchstieren, die mit atopischen PBMCs supplementiert mit Birkenallergen und IL-4 rekonstituiert wurden. Die Allergenabhängigkeit des etablierten Modells wurde anhand von Experimenten untermauert, die verdeutlichten, dass ein Transfer von PBMCs nicht-allergischer Probanden trotz Zugabe des Allergens und humanem IL-4 keine Atemwegsinflammation auslöste. Bei den humanen Zellen, die an Tag 24 nach Rekonstitution in den Mäusen detektiert werden konnten, handelte es sich hauptsächlich um T-Zellen. Innerhalb dieser CD3+ T-Zellen konnten CD4+ und CD8+ T-Zellen differenziert werden. Depletionsexperimente, in denen nach Gewinnung der PBMCs aus dem Blut der Probanden verschiedene T-Zellsubpopulationen (CD3+, CD4+, CD8+) eliminiert wurden, führten zu dem Befund, dass die allergische Atemwegsentzündung in dem System von humanen CD4+ T-Zellen abhängig war. Nach der Etablierung des humanisierten Mausmodells der allergischen Atemwegsentzündung wurde das System zur Analyse des suppressionsfördernden Potentials des HIV-1 - Hüllproteins gp120 genutzt. Die Applikation von gp120 führte zu einer Reduktion der Atemwegsinflammation. Dies äußerte sich in einer Aufhebung der AHR, verminderten Zellzahlen in der BAL sowie dem reduzierten Einstrom humaner T-Zellen in die Lungen der rekonstituierten Tiere. Weiterhin konnte gezeigt werden, dass die anti-inflammatorische Wirkung des gp120 strikt von der Anwesenheit regulatorischer T-Zellen (Tregs) innerhalb der für die Humanisierung genutzten PBMCs abhängig war. Eine Depletion der Tregs vor Transfer in die Mäuse führte zum Verlust der anti-inflammatorischen Effekte des gp120. Diese Ergebnisse sprechen für die Modulation regulatorischer T-Zellen als hoffnungsvolle Maßnahme in der Behandlung allergischer Erkrankungen. Die im Rahmen dieser Arbeit gewonnenen Erkenntnisse eröffnen innovative Ansätze zur Analyse neuer Therapiestrategien in einem Testsystem, dass die Erforschung humaner Zellinteraktionen sowie die Wirkung potentieller Arzneistoffe auf humane Zellen unter in vivo Bedingungen erlaubt.

The reconstruction of skeletal movement: the soft tissue artefact issue

In 3D human movement analysis performed using stereophotogrammetric systems and skin markers, bone pose can only be estimated in an indirect fashion. During a movement, soft tissue deformations make the markers move with respect to the underlying bone generating soft tissue artefact (STA). STA has devastating effects on bone pose estimation and its compensation remains an open question. The aim of this PhD thesis was to contribute to the solution of this crucial issue. Modelling STA using measurable trial-specific variables is a fundamental prerequisite for its removal from marker trajectories. Two STA model architectures are proposed. Initially, a thigh marker-level artefact model is presented. STA was modelled as a linear combination of joint angles involved in the movement. This model was calibrated using ex-vivo and in-vivo STA invasive measures. The considerable number of model parameters led to defining STA approximations. Three definitions were proposed to represent STA as a series of modes: individual marker displacements, marker-cluster geometrical transformations (MCGT), and skin envelope shape variations. Modes were selected using two criteria: one based on modal energy and another on the selection of modes chosen a priori. The MCGT allows to select either rigid or non-rigid STA components. It was also empirically demonstrated that only the rigid component affects joint kinematics, regardless of the non-rigid amplitude. Therefore, a model of thigh and shank STA rigid component at cluster-level was then defined. An acceptable trade-off between STA compensation effectiveness and number of parameters can be obtained, improving joint kinematics accuracy. The obtained results lead to two main potential applications: the proposed models can generate realistic STAs for simulation purposes to compare different skeletal kinematics estimators; and, more importantly, focusing only on the STA rigid component, the model attains a satisfactory STA reconstruction with less parameters, facilitating its incorporation in an pose estimator.

Miglioramento delle performance termiche e energetiche degli edifici rurali: valutazione del retrofit di locali per la conservazione del vino su casi studio

Il presente studio si colloca all’interno di una ricerca più ampia volta alla definizione di criteri progettuali finalizzati all’ottimizzazione delle prestazioni energetiche delle cantine di aziende vitivinicole, di dimensioni produttive medio - piccole. Nello specifico la ricerca riguarda la riqualificazione di fabbricati rurali esistenti di modeste dimensioni, da convertire a magazzini per la conservazione del vino in bottiglia. Lo studio si pone come obiettivo la definizione di criteri di analisi per la valutazione di interventi di retrofit di tali fabbricati, volto sia al miglioramento delle prestazioni energetiche dell’involucro edilizio, sia alla riduzione del fabbisogno energetico legato al funzionamento di eventuali impianti di controllo termico. La ricerca è stata condotta mediante l’utilizzo del software di simulazione termica Energy Plus, per ottenere i valori simulati di temperatura interna relativi ai diversi scenari migliorativi ipotizzati, e mediante la successiva definizione di indicatori che esplicitino l’influenza delle principali variabili progettuali sull’andamento delle temperature interne dei locali di conservazione e sul fabbisogno energetico del fabbricato necessario a garantire l’intervallo di temperatura di comfort del vino. Tra tutti gli interventi possibili per il miglioramento della prestazione energetica degli edifici, quelli analizzati in questo studio prevedono l’aggiunta di un isolamento a cappotto delle pareti esterne, l’isolamento della copertura e l’aggiunta di una struttura ombreggiante vegetale esterna. I risultati ottenuti danno una prima indicazione sugli interventi più efficaci in termini di miglioramento energetico e mettono in luce l’utilità del criterio proposto nell’evidenziare le criticità degli interventi migliorativi ipotizzati. Il metodo definito nella presente ricerca risulta quindi un valido strumento di valutazione a supporto della progettazione degli interventi di retrofit dei fabbricati rurali da convertire a magazzini per la conservazione del vino.

Structural verification of the ESEO spacecraft: from launch loads analysis to composite panels verification

The present thesis work was performed in the frame of ESEO (European Student Earth Orbiter) project. The activities that are described in this document were carried out in the Microsatellites and Space Micro systems Lab led by Professor Paolo Tortora and in ALMASpace company facilities. The thesis deals with ESEO structural analysis, at system and unit level, and verification: after determining the design limit loads to be applied to the spacecraft as an envelope of different launchers load profiles, a finite element structural analysis was performed on the model of the satellite in order to ensure the capability to withstand the loads encountered during the launch; all the analyses were performed according to ESA standards and using the software MSC NASTRAN SIMXPERT. Amplification factors were derived and used to determine loads to be considered at unit level. In particular structural analyses were carried out on the GPS unit, the payload developed for ESEO by students of University of Bologna and results were used in the preparation of GPS payload design definition file. As for the verification phase a study on the panels and inserts to be used in the spacecraft was performed: different designs were created exploiting methods to optimize weight and mechanical behavior. The configurations have been analyzed and results compared to select the final design.

Einfluss subviraler Partikel des humanen Cytomegalovirus auf die Induktion der antiviralen Immunantwort

Das humane Cytomegalovirus (HCMV) ist ein opportunistischer Krankheitserreger, der insbesondere bei Patienten mit unreifem oder geschwächtem Immunsystem schwere, teilweise lebensbedrohliche Erkrankungen verursacht. Aufgrund der klinischen Relevanz wird die Entwicklung einer Impfung gegen HCMV mit großem Nachdruck verfolgt. Subvirale Partikel des HCMV, sogenannte Dense Bodies (DB), stellen eine vielversprechende Impfstoff-Grundlage dar. Die innere Struktur der Partikel besteht aus viralen Proteinen, die als dominante Antigene der zellulären Immunantwort gegen HCMV identifiziert wurden. Die äußere Hülle der Partikel entspricht der Virushülle, sie enthält die viralen Oberflächenproteine als Zielantigene der neutralisierenden Antikörper (NTAk)-Antwort in ihrer natürlichen Konformation. Die für ein Totantigen außergewöhnlich hohe Immunogenität der Partikel wurde bereits in Vorarbeiten dokumentiert. Ein Ziel dieser Arbeit war es, den molekularen Hintergrund für die herausragenden, immunogenen Eigenschaften von DB aufzuklären. Im ersten Teil der Arbeit wurde daher die Hypothese geprüft, dass DB geeignet sind, die Ausreifung und Aktivierung von dendritischen Zellen (DC) zu vermitteln und damit deren Fähigkeit zur Antigenpräsentation zu stimulieren. Derart aktivierten DC kommt eine wichtige Rolle beim Priming der T-lymphozytären Immunantwort zu. In der Tat konnte gezeigt werden, dass die Behandlung von unreifen dendritischen Zellen (iDC) mit DB zu verstärkter Expression von solchen Molekülen auf der DC-Oberfläche führt, die mit Ausreifung der Zellen verknüpft sind. Der Nachweis der verstärkten Freisetzung proinflammatorischer Zytokine belegte die Aktivierung der Zellen im Sinne einer entzündlichen Reaktion. Die erfolgreiche Stimulation von CD4 und CD8 T-Lymphozyten durch DB-behandelte DC belegte schließlich die funktionelle Relevanz der Ergebnisse. Zusammengefasst konnten in diesem Abschnitt der Arbeit die molekularen Grundlagen der adjuvanten Wirkung von DB aufgeklärt werden. rnIn einem zweiten Abschnitt wurde die NTAk-Antwort nach DB-Immunisierung näher untersucht. Der humoralen Immunantwort kommt eine entscheidende Bedeutung bei der Prävention der HCMV-Übertragung zu. Hier galt es zu prüfen, welchen Einfluss stammspezifische Unterschiede in der Expression viraler Oberflächenproteine auf die Induktion der NTAk-Antwort nach DB-Immunisierung nehmen. Im Fokus stand dabei die variable Expression des pentameren Proteinkomplexes aus den viralen Proteinen gH/gL/pUL128-UL131A. Dieser Komplex wird nur von kliniknahen HCMV-Stämmen (HCMVKlin) exprimiert und ist für deren breiten Zelltropismus verantwortlich. Der pentamere Komplex fehlte in allen bisherigen Analysen der DB-Immunogenität, die auf der Grundlage von Laborstämmen des HCMV (HCMVLab) durchgeführt worden waren. Ein erster Versuchsansatz zeigte, dass die NTAk-Antwort, die durch DB von HCMVLab (DBLab) induziert wird, auch gegen die Infektion mit HCMVKlin einen gewissen Schutz vermittelt. Dies war ein überraschender Befund, da Antikörpern gegen den pentameren Komplex eine entscheidende Rolle bei der Neutralisation von HCMVKlin zugeschrieben wurde. Die Ergebnisse zeigten jedoch, dass Antikörper gegen andere Zielstrukturen zur Neutralisation von HCMVKlin beitragen. Hieraus resultierte unmittelbar die Frage, inwieweit eine Aufnahme des pentameren Komplexes in einen DB-basierten Impfstoff überhaupt notwendig war. Um dies zu beantworten war es notwendig, DB herzustellen, die den pentameren Komplex enthielten. Hierzu wurde ein HCMVLab durch Mutagenese des 235 kpb Genoms so modifiziert, dass von dem resultierenden Stamm der pentamere Komplex exprimiert wurde. In gereinigten DB dieses Stammes konnten die Komponenten des pentameren Komplexes nachgewiesen werden. Die Seren von Tieren, die mit DB dieses neuen Stammes immunisiert wurden, zeigten in der Tat eine deutlich gesteigerte Kapazität zur Neutralisation von HCMVKlin auf verschiedenen Zielzellen. Diese Ergebnisse unterstreichen schlussendlich, dass die Expression des pentameren Komplexes einen Vorteil bei der Induktion der antiviralen NTAk-Antwort erbringt. Zusammengefasst liefern die Erkenntnisse aus dieser Arbeit einen wichtigen Beitrag zum Verständnis der immunogenen Wirkung von DB. Auf dieser Grundlage war es nunmehr möglich, ein Projekt zur Austestung der DB-Vakzine in einer ersten klinischen Studie zu initiieren.

Implementazione su fpga di un pre-distorsore digitale a banda larga per sistemi a microonde di backhaul

The development of next generation microwave technology for backhauling systems is driven by an increasing capacity demand. In order to provide higher data rates and throughputs over a point-to-point link, a cost-effective performance improvement is enabled by an enhanced energy-efficiency of the transmit power amplification stage, whereas a combination of spectrally efficient modulation formats and wider bandwidths is supported by amplifiers that fulfil strict constraints in terms of linearity. An optimal trade-off between these conflicting requirements can be achieved by resorting to flexible digital signal processing techniques at baseband. In such a scenario, the adaptive digital pre-distortion is a well-known linearization method, that comes up to be a potentially widely-used solution since it can be easily integrated into base stations. Its operation can effectively compensate for the inter-modulation distortion introduced by the power amplifier, keeping up with the frequency-dependent time-varying behaviour of the relative nonlinear characteristic. In particular, the impact of the memory effects become more relevant and their equalisation become more challenging as the input discrete signal feature a wider bandwidth and a faster envelope to pre-distort. This thesis project involves the research, design and simulation a pre-distorter implementation at RTL based on a novel polyphase architecture, which makes it capable of operating over very wideband signals at a sampling rate that complies with the actual available clock speed of current digital devices. The motivation behind this structure is to carry out a feasible pre-distortion for the multi-band spectrally efficient complex signals carrying multiple channels that are going to be transmitted in near future high capacity and reliability microwave backhaul links.

Prediction and measurement of forced response of a composite blade undergoing nonlinear vibration

The main objective of this project is to experimentally demonstrate geometrical nonlinear phenomena due to large displacements during resonant vibration of composite materials and to explain the problem associated with fatigue prediction at resonant conditions. Three different composite blades to be tested were designed and manufactured, being their difference in the composite layup (i.e. unidirectional, cross-ply, and angle-ply layups). Manual envelope bagging technique is explained as applied to the actual manufacturing of the components; problems encountered and their solutions are detailed. Forced response tests of the first flexural, first torsional, and second flexural modes were performed by means of a uniquely contactless excitation system which induced vibration by using a pulsed airflow. Vibration intensity was acquired by means of Polytec LDV system. The first flexural mode is found to be completely linear irrespective of the vibration amplitude. The first torsional mode exhibits a general nonlinear softening behaviour which is interestingly coupled with a hardening behaviour for the unidirectional layup. The second flexural mode has a hardening nonlinear behaviour for either the unidirectional and angle-ply blade, whereas it is slightly softening for the cross-ply layup. By using the same equipment as that used for forced response analyses, free decay tests were performed at different airflow intensities. Discrete Fourier Trasform over the entire decay and Sliding DFT were computed so as to visualise the presence of nonlinear superharmonics in the decay signal and when they were damped out from the vibration over the decay time. Linear modes exhibit an exponential decay, while nonlinearities are associated with a dry-friction damping phenomenon which tends to increase with increasing amplitude. Damping ratio is derived from logarithmic decrement for the exponential branch of the decay.

Orthodontic therapy and gingival recession: a systematic review

To perform a systematic review on the effect of changes in incisor inclination owing to orthodontic treatment and the occurrence of gingival recession. PubMed, EMBASE Excerpta Medica and CENTRAL of the Cochrane Library were searched and a hand search was performed. From 1925 articles identified, 17 articles were finally included: six experimental animal studies and 11 retrospective clinical studies in humans. More proclined teeth compared with less proclined teeth or untreated teeth had in most studies a higher occurrence or severity of gingival recession. Contradictory results were found regarding a possible statistically significant correlation between the extent of gingival recession and the amount of incisor proclination during treatment, width of attached gingiva, hygiene, periodontal condition or thickness of the symphysis. There are no high quality animal or clinical studies on this topic. Movement of the incisors out of the osseous envelope of the alveolar process may be associated with a higher tendency for developing gingival recessions. The amount of recession found in studies with statistically significant differences between proclined and non-proclined incisors is small and the clinical consequence questionable. Because of the low level of evidence of the included studies, the results should be considered with caution. Further randomized clinical studies including clinical examination of hygiene and gingival condition before, during and after treatment are needed to clarify the effect of orthodontic changes in incisor inclination and the occurrence of gingival recession.

Adsorption of Components of the Plasma Kinin-forming System on the Surface of Porphyromonas gingivalis Involves Gingipains as the Major Docking Platforms

Enhanced production of proinflammatory bradykinin-related peptides, the kinins, has been suggested to contribute to the pathogenesis of periodontitis, a common inflammatory disease of human gingival tissues. In this report, we describe a plausible mechanism of activation of the kinin-generating system, also known as the contact system or kininogen-kallikrein-kinin system, by the adsorption of its plasma-derived components such as high-molecular-mass kininogen (HK), prekallikrein (PK), and Hageman factor (FXII) to the cell surface of periodontal pathogen Porphyromonas gingivalis. The adsorption characteristics of mutant strains deficient in selected proteins of the cell envelope suggested that the surface-associated cysteine proteinases, gingipains, bearing hemagglutinin/adhesin domains (RgpA and Kgp) serve as the major platforms for HK and FXII adhesion. These interactions were confirmed by direct binding tests using microplate-immobilized gingipains and biotinylated contact factors. Other bacterial cell surface components such as fimbriae and lipopolysaccharide were also found to contribute to the binding of contact factors, particularly PK. Analysis of kinin release in plasma upon contact with P. gingivalis showed that the bacterial surface-dependent mechanism is complementary to the previously described kinin generation system dependent on HK and PK proteolytic activation by the gingipains. We also found that several P. gingivalis clinical isolates differed in the relative significance of these two mechanisms of kinin production. Taken together, these data show the importance of this specific type of bacterial surface-host homeostatic system interaction in periodontal infections.

Comparison of different methods for thin section EM analysis of Mycobacterium smegmatis

Bacteria are generally difficult specimens to prepare for conventional resin section electron microscopy and mycobacteria, with their thick and complex cell envelope layers being especially prone to artefacts. Here we made a systematic comparison of different methods for preparing Mycobacterium smegmatis for thin section electron microscopy analysis. These methods were: (1) conventional preparation by fixatives and epoxy resins at ambient temperature. (2) Tokuyasu cryo-section of chemically fixed bacteria. (3) rapid freezing followed by freeze substitution and embedding in epoxy resin at room temperature or (4) combined with Lowicryl HM20 embedding and ultraviolet (UV) polymerization at low temperature and (5) CEMOVIS, or cryo electron microscopy of vitreous sections. The best preservation of bacteria was obtained with the cryo electron microscopy of vitreous sections method, as expected, especially with respect to the preservation of the cell envelope and lipid bodies. By comparison with cryo electron microscopy of vitreous sections both the conventional and Tokuyasu methods produced different, undesirable artefacts. The two different types of freeze-substitution protocols showed variable preservation of the cell envelope but gave acceptable preservation of the cytoplasm, but not lipid bodies, and bacterial DNA. In conclusion although cryo electron microscopy of vitreous sections must be considered the 'gold standard' among sectioning methods for electron microscopy, because it avoids solvents and stains, the use of optimally prepared freeze substitution also offers some advantages for ultrastructural analysis of bacteria.

5a-Butyl-1,3,8,10-tetra-chloro-7,13-bis-(4-nitro-benzo-yl)-5a,6a,12a,12b-tetra-hydro-7H,13H-thieno[2,3-b:4,5-b']bis-(1,4-benzoxazine)

The title compound, C(34)H(24)Cl(4)N(4)O(8)S, is a linear penta-cyclic system formed of two substituted benzoxazinyl groups fused to 2-n-butyl-tetra-hydro-thio-phene. The oxazine ring, which is fused to the n-butyl-substituted side of the thio-phene ring, is in a boat conformation. The other fused oxazine ring and the tetra-hydro-thiene ring are each in an envelope conformation. The bridgehead C atom alpha to both the S and N atoms forms the flap of each envelope. This results in a twist of the penta-cyclic system such that the dihedral angle between the terminal dichloro-benzene rings is 82.92 (8)°. In the crystal, inversion-related mol-ecules form a weakly hydrogen-bonded dimer, with two C-H⋯O inter-actions between an H atom on the oxazine ring and an amide O atom. Additionally, C-H⋯O inter-actions occur between an H atom on a screw-related nitro-benzene ring and an O atom on the nitro-benzene ring of one mol-ecule. One of the Cl atoms and the butyl group are disordered over two sets of sites with occupancy ratios of 0.94 (2):0.06 (2) and 0.624 (4):0.376 (4), respectively.

Model Predictive Control for Vehicle Stabilization at the Limits of Handling

Recent developments in vehicle steering systems offer new opportunities to measure the steering torque and reliably estimate the vehicle sideslip and the tire-road friction coefficient. This paper presents an approach to vehicle stabilization that leverages these estimates to define state boundaries that exclude unstable vehicle dynamics and utilizes a model predictive envelope controller to bound the vehicle motion within this stable region of the state space. This approach provides a large operating region accessible by the driver and smooth interventions at the stability boundaries. Experimental results obtained with a steer-by-wire vehicle and a proof of envelope invariance demonstrate the efficacy of the envelope controller in controlling the vehicle at the limits of handling.

Phylogenetic and virulence analysis of tick-borne encephalitis virus field isolates from Switzerland

Tick-borne encephalitis (TBE) is an endemic disease in Switzerland, with about 110-120 reported human cases each year. Endemic areas are found throughout the country. However, the viruses circulating in Switzerland have not been characterized so far. In this study, the complete envelope (E) protein sequences and phylogenetic classification of 72 TBE viruses found in Ixodes ricinus ticks sampled at 39 foci throughout Switzerland were analyzed. All isolates belonged to the European subtype and were highly related (mean pairwise sequence identity of 97.8% at the nucleotide and 99.6% at the amino acid level of the E protein). Sixty-four isolates were characterized in vitro with respect to their plaque phenotype. More than half (57.8%) of isolates produced a mixture of plaques of different sizes, reflecting a heterogeneous population of virus variants. Isolates consistently forming plaques of small size were associated with recently detected endemic foci with no or only sporadic reports of clinical cases. All of six virus isolates investigated in an in vivo mouse model were highly neurovirulent (100% mortality) but exhibited a relatively low level of neuroinvasiveness, with mouse survival rates ranging from 50% to 100%. Therefore, TBE viruses circulating in Switzerland belong to the European subtype and are closely related. In vitro and in vivo surrogates suggest a high proportion of isolates with a relatively low level of virulence, which is in agreement with a hypothesized high proportion of subclinical or mild TBE infections.

Causes and consequences of past and projected Scandinavian summer temperatures, 500-2100 AD

Tree rings dominate millennium-long temperature reconstructions and many records originate from Scandinavia, an area for which the relative roles of external forcing and internal variation on climatic changes are, however, not yet fully understood. Here we compile 1,179 series of maximum latewood density measurements from 25 conifer sites in northern Scandinavia, establish a suite of 36 subset chronologies, and analyse their climate signal. A new reconstruction for the 1483–2006 period correlates at 0.80 with June–August temperatures back to 1860. Summer cooling during the early 17th century and peak warming in the 1930s translate into a decadal amplitude of 2.9°C, which agrees with existing Scandinavian tree-ring proxies. Climate model simulations reveal similar amounts of mid to low frequency variability, suggesting that internal ocean-atmosphere feedbacks likely influenced Scandinavian temperatures more than external forcing. Projected 21st century warming under the SRES A2 scenario would, however, exceed the reconstructed temperature envelope of the past 1,500 years.

Identification of key residues in virulent canine distemper virus hemagglutinin that control CD150/SLAM-binding activity

Morbillivirus cell entry is controlled by hemagglutinin (H), an envelope-anchored viral glycoprotein determining interaction with multiple host cell surface receptors. Subsequent to virus-receptor attachment, H is thought to transduce a signal triggering the viral fusion glycoprotein, which in turn drives virus-cell fusion activity. Cell entry through the universal morbillivirus receptor CD150/SLAM was reported to depend on two nearby microdomains located within the hemagglutinin. Here, we provide evidence that three key residues in the virulent canine distemper virus A75/17 H protein (Y525, D526, and R529), clustering at the rim of a large recessed groove created by beta-propeller blades 4 and 5, control SLAM-binding activity without drastically modulating protein surface expression or SLAM-independent F triggering.