Age and growth of leaping grey mullet (Liza saliens (Risso, 1810)) in Minorca (Balearic Islands)

A population of leaping grey mullet (Liza saliens (Risso, 1810) was studied in order to measure seasonal and annual growth rates. The annual growth rates were similar to those reported for other populations from the central Western Mediterranean and intermediate between those living in northern and southern areas. As usual, the growth rate of adult males was slower than that of females. Males reached adulthood in their third summer. Females of the same age showed a moderate gonadal development, but did not ripen until the next summer. Mullets of all ages gained weight only when the water temperature was higher than 20°C. However adults and immature fish showed reduced growth in mid-summer, when that of the juveniles peaked. This difference is not a consequence of the reproductive cost, because the growth rate of immatures was greatly reduced although they did not spawn.

Habitat selection by grey mullets (Osteichthyes: Mugilidae) in Mediterranean estuaries: the role of salinity.

A stratified study of microhabitat use by grey mullet on the island of Minorca (Balearic archipelago, western Mediterranean) showed that the distribution of all the species was dramatically affected by salinity. Sites with a salinity level under 15 were positively selected in spring and summer by those species whose growth performance was the best in oligomesohaline water (Liza ramado and Mugil cephalus) but also by a species whose growth was not affected by salinity (Chelon labrosus). Liza aurata concentrated in polyhaline and euhaline sites, where growth was improved, a pattern also exhibited by Liza saliens. Both species avoided fresh water sites all year round. As a consequence, community structure was correlated with salinity. The above reported electivity patterns often disappeared in autumn, when most grey mullets migrate off-shore.

Effects of recreational fishing on three fish species from the Posidonia oceanica meadows off Minorca (Balearic archipelago, western Mediterranean)

Experimental fishing and visual censuses were conducted at nine Posidonia oceanica sites off Minorca exposed to different levels of fishing intensity to assess the effects of recreational fishing on the species that dominate the catch. Total catch per unit effort (CPUE) was highly seasonal and a statistically significant interaction term existed between the season and the level of fishing intensity. CPUE decreased everywhere at the end of the fishing season (autumn), but such a reduction was more intense at those sites exposed to the highest level of fishing. Visual censuses confirmed that there was a lower abundance of vulnerable fish in autumn. Differences vanished in spring probably because fish reshuffled between the considered sites throughout the winter, when the level of fishing intensity was extremely low. Although the average total lengths of Serranus scriba and Diplodus annularis were unaffected by the level of fishing intensity, the average total length of Coris julis was smaller at the most heavily fished sites. In conclusion, recreational fishing has a relevant impact on most of the exploited species and some of the seasonality reported for the Posidonia oceanica fish assemblages might be caused by the seasonality of the fishery.

Phenotypic plasticity in the Caribbean sponge Callyspongia vaginalis (Porifera: Haplosclerida)

Sponge morphological plasticity has been a long-standing source of taxonomic difficulty. In the Caribbean, several morphotypes of the sponge Callyspongia vaginalis have been observed. To determine the taxonomic status of three of these morphotypes and their relationship with the congeneric species C. plicifera and C. fallax, we compared the spicule composition, spongin fiber skeleton and sequenced fragments of the mitochondrial genes 16S and COI and nuclear genes 28S and 18S ribosomal RNA. Phylogenetic analyses with ribosomal markers 18S and 28S rRNA confirmed the position of our sequences within the Callyspongiidae. None of the genetic markers provided evidence for consistent differentiation among the three morphotypes of C. vaginalis and C. fallax, and only C. plicifera stood as a distinct species. The 16S mtDNA gene was the most variable molecular marker for this group, presenting a nucleotide variability (π = 0.024) higher than that reported for COI. Unlike recent studies for other sponge genera, our results indicate that species in the genus Callyspongia maintain a high degree of phenotypic plasticity, and that morphological characteristics may not reflect reproductive boundaries in C. vaginalis.

Resultados preliminares obtenidos a partir de una trampa Malaise situada en una zona mediterránea pirenaica

En este estudio se da cuenta de los distintos órdenes de artrópodos capturados mediante una trampa Malaise en Santa Coloma (Andorra) después de un año de muestreo. Han sido colectados 141.522 ejemplares pertenecientes a 20 órdenes distintos. El 99,5% corresponden a insectos, entre los cuales los dípteros (con el 74,1%), juntamente con los himenópteros (15,2%) y los homópteros (5,8%) constituyen más del 95% de las capturas realizadas. Se discute la fenología anual de los distintos grupos en el área de estudio y su relación con las circunstancias meteorológicas del año 1993. En general, las mayores abundancias de los principales grupos se registran entre la segunda mitad de la primavera y la primera mitad del verano debido a las condiciones xerotérmicas de dicha localidad.

Ultrastructural data on the life cycle of the parasite, Perkinsus atlanticus (Apicomplexa), on the clam, Ruditapes phillipinarum, in the Mediterranean

An Apicomplexan Perkinsus species has been found parasitizing the clam Ruditapes philippinarum (= Tapes semidecussatus) collected on the Mediterranean coast in the region of the Ebro Delta (Tarragona, Spain). Light and transmission electron microscopy were used to study different stages of this parasite during zoosporulation induced by incubation in thioglycollate medium and seawater. During incubation the trophozoites began zoosporulation, which originated prezoosporangia and zoosporangia at different developmental stages. Successive cytokinesis and nucleokinesis gave rise to prezoospores, which became elongate and differentiated in biflagellated zoospores. The latter presented large mitochondria and an apical complex formed by a conoid, polar ring, micronemes, rhophtries and subpellicular microtubules. The zoosporangium wall showed some typical lamosomes and a discharge tube developed in early phases of incubation. Ultrastructural data were compared with the only four species of the genus Perkinsus previously described. The morphological data, the host and the geographic proximity suggest that the species located on the Mediterranean coast was Perkinsus atlanticus.

Ultrastructural studies of oogenesis in Bolinus brandaris(Gastropoda: Muricidae).

Ultrastructural studies of oogenesis in Bolinus brandaris are described. Although the initial phase of oogenesis is common to most animal species, vitellogenesis can be considered a species-specific characteristic. In the vitellogenesis of B.brandaris, mitochondria and endoplasmic reticula play a relevant role in the formation of myelinised membranous systems. Nuclear envelope, Golgi body and the oocyte plasma membrane invaginations are three possible origins for annulate lamellae. The latter can be considered membranous reservoirs. There are two sources for the vitellum: exogenous (from follicular cells) and endogenous (from the endoplasmic reticulum of the same oocyte).

Metaestabilidad estructural a traves de proyeccion termica

Recientes investigaciones en el campo de los materiales cerámicos han dado cuenta de la importancia de la metaestabilidad para obtener estructuras con características singulares. Durante la consolidación del material las fases mestaestables se transforman en una estructura donde se produce la inhibición del crecimiento de grano. Este efecto es una consecuencia directa de la inmiscibilidad de dos fases en estado sólido. Los nanocomposites conseguidos, gracias a su pequeño tamaño de grano y a su estructura uniforme, exhiben unas interesantes propiedades como elevada dureza y tenacidad. Estas fases metaestables pueden ser producidas por diversas técnicas entre las que se encuentra la proyección térmica. En concreto en este trabajo se ha empleado la Proyección por plasma (APS). Las fases de partida inmiscibles, son fundidas y homogeneizadas durante su corta estancia en la zona caliente del plasma. Seguidamente, las partículas fundidas y aceleradas por el plasma, se someten a un enfriamiento rápido o temple (quenching) en un medio líquido, como el agua o en un substrato enfriado con nitrógeno líquido, formándose a través de este proceso las fases metaestables. El principal objetivo de este trabajo ha sido la obtención de polvos cerámicos metastables a través de la aplicación de APS y el establecimiento de un proceso de temple conducente a la formación de fases metastables así como la caracterización estructural de éstas. Como última etapa del trabajo se han estudiado los materiales nanoestructurados conseguidos tras realizar tratamientos térmicos.

Precipitacion de plata en efluentes electroliticos

La recuperación de plata contenida en efluentes electrolíticos es atractiva por su alto valor económico. Estos efluentes son catalogados como residuos tóxicos y no pueden ser evacuados a cauces públicos sin un tratamiento previo de detoxificación. Una de las vías propuestas para recuperar plata de este tipo de efluentes es la precipitación química utilizando ditionito de sodio, borohidruro de sodio o monohidrato de hidracina. En este trabajo, se discuten los aspectos más signifícativos de la utilización de estos reactivos para el citado objetivo. Se presentan resultados de la precipitación de plata con ditionito de sodio en efluentes base tiosulfato, sin eliminación de otras especies presentes. Se pone de maniflesto la capacidad de este reactivo de cumplir los objetivos de alcanzar una precipitación, prácticamente total, de la plata, dejando el metal en el efluente a niveles de menos de 1 ppm, sin introducir substancias extrañas al sistema.

Variacion del modulo de 'Young' con el tratamiento termico en aceros al carbono hipoeutectoides

En trabajos anteriores se ha constatado que varios aceros al carbono hipoeutectoides, en estado de temple, presentan valores del módulo de Young inferiores a los correspondientes en estado de revenido. En todos los casos la determinación se ha realizado mediante ultrasonidos. En concreto, para el acero C22E (EN 10083), el módulo se incrementa ligeramente desde 209 GPa (material templado) hasta 211 GPa (revenido a 650 °C), para el acero C45E el módulo aumenta desde 199 GPa hasta 211 GPa (revenido a 500 °C) y para el acero C55E el módulo varía desde 202 GPa hasta 209 GPa para el acero revenido a 650 °C. El presente trabajo se centra en la caracterización estructural de los tres aceros mencionados a los distintos estados de tratamiento térmico, utilizando las técnicas de microscopía óptica de reflexión y microscopía electrónica de barrido, y se propone una explicación de la variación del módulo a partir del comportamiento de las dislocaciones y su interacción con átomos de soluto y con otras dislocaciones.

Genesis of self-organized zebra textures in burial dolomites: Displacive veins, induced stress, and dolomitization

The dolomite veins making up rhythmites common in burial dolomites are not cement infillings of supposed cavities, as in the prevailing view, but are instead displacive veins, veins that pushed aside the host dolostone as they grew. Evidence that the veins are displacive includes a) small transform-fault-like displacements that could not have taken place if the veins were passive cements, and b) stylolites in host rock that formed as the veins grew in order to compensate for the volume added by the veins. Each zebra vein consists of crystals that grow inward from both sides, and displaces its walls via the local induced stress generated by the crystal growth itself. The petrographic criterion used in recent literature to interpret zebra veins in dolomites as cements - namely, that euhedral crystals can grow only in a prior void - disregards evidence to the contrary. The idea that flat voids did form in dolostones is incompatible with the observed optical continuity between the saddle dolomite euhedra of a vein and the replacive dolomite crystals of the host. The induced stress is also the key to the self-organization of zebra veins: In a set of many incipient, randomly-spaced, parallel veins just starting to grow in a host dolostone, each vein¿s induced stress prevents too-close neighbor veins from nucleating, or redissolves them by pressure-solution. The veins that survive this triage are those just outside their neighbors¿s induced stress haloes, now forming a set of equidistant veins, as observed.

La composicion isotopica del azufre y del plomo en las mineralizaciones de Zn-Pb del Valle de Aran (Pirineo Central) y su significado metalogenetico

La composición isotópica del azufre en sulfuros (834S) de las mineralizaciones tipo sedimentario-exhalativo del Ordovícico superior del valle de Arán (Pirineos Centrales) varía entre +3,5 y +15,1 %0 en los encajados en carbonatos y entre -2,7 y +5,5 %0 en los encajados en materiales detríticos. Estos valores sugieren que dichos depósitos se formaron a partir de dos fuentes de azufre distintas: una originada por reducción de sulfato de origen marino y otra por lixiviación de materiales detríticos y/o volcánicos de edad cambro-ordovícica.

Role of fluid mixing in deep dissolution of carbonates

The presence of cavities filled with new minerals in carbonate rocks is a common feature in oil reservoirs and lead-zinc deposits. Since groundwater equilibrates rapidly with carbonates, the presence of dissolution cavities in deep carbonate host rocks is a paradox. Two alternative geochemical processes have been proposed to dissolve carbonates at depth: hydrogen sulfide oxidation to sulfuric acid, and metal sulfide precipitation. With the aid of geochemical modeling we show that mixing two warm solutions saturated with carbonate results in a new solution that dissolves limestone. Variations in the proportion of the end-member fluids can also form a supersaturated mixture and fill the cavity with a new generation of carbonate. Mixing is in general more effective in dissolving carbonates than the aforementioned processes. Moreover, mixing is consistent with the wide set of textures and mineral proportions observed in cavity infillings.