Evaluación de la exposición laboral a material particulado en empresas pertenecientes a diferentes sectores económicos en Colombia, 2014

Introducción El material particulado son partículas sólidas y líquidas emitidas al aire, las cuales pueden generar diferentes alteraciones en la salud, variando desde cuadros respiratorios alérgicos, a episodios asmáticos, dermatitis o inclusive llegar a facilitar la génesis de enfermedades de tipo neoplásico. Estos pueden tener origen natural e industrial, encontrandose en diferentes actividades económicas. Objetivo Evaluar la exposición laboral a material particulado en empresas pertenecientes a diferentes sectores económicos afiliadas a una ARL en Colombia, en el periodo comprendido entre 2011 al 2014 Metodología Es un estudio de corte transversal, analizando una base de datos de 257 empresas con 1108 mediciones de material particulado, recolectados entre 2011 – 2014. Las variables usadas fueron: región, actividad económica, área, oficio, tiempo de exposición y concentración de material particulado. Se realizó distribuciones de frecuencia, medidas de tendencia central y de dispersión. Se evaluaron las diferencias de las distribuciones de los tiempos de exposición y el porcentaje de exposición entre los grupos con y sin riesgo (los que sobrepasaban o no los límites permisibles), con la prueba asintótica no paramétrica de Mann Whitney. Resultados Las principales mediciones ambientales en las empresas fueron en la industria química con un 31%, siendo 2 de cada 3 datos pertenecientes a la región andina, las cuales tienen como principales contaminantes químicos las partículas no fraccionadas con el 70,9%. Respecto a las concentraciones ambientales de material particulado en las empresas participantes, se encontró un promedio de 1,72 mg/m3 ± 3,613, con una mediana de 0,480 mg/m3 y un coeficiente de variación de 210,05%. El 2,9% sobrepasaron los valores límites establecidos por la ACGIH (American Conference of Governmental Industrial Hygienists) y el 92,5% según los límites de la EPA (Agencia de Protección del Ambiente), presentando mayor riesgo en el personal operativo con 93,3% (p= 0,002). Conclusión El riesgo según los límites establecidos por la ACGIH para las mediciones realizadas en Colombia fue bajo, aunque al utilizar los parámetros de la EPA, el riesgo fue alto, por lo cual se requiere hacer un seguimiento específico a estas empresas y fomentar la implementación del sistema de gestión en seguridad y salud en el trabajo.

Reciclaje de residuos sólidos domésticos y conductas pro-ambientales en una comunidad residencial de Bogotá, Colombia

Introducción: La implicación social dentro de la problemática ambiental, establece una relación causal entre hábitos e impacto ambiental; aspectos del comportamiento humano tales como la conveniencia, familiaridad, presión social y actitud, nos permiten realizar un acercamiento acerca de la decisión de reciclar o no en un hogar. Objetivo: identificar los factores ambientales asociados con el manejo de residuos domésticos entre los miembros de una comunidad residencial en la ciudad de Bogotá. Materiales y métodos: Se realizó un estudio transversal realizado a 200 personas de una comunidad residencial. La evaluación de la conducta pro-ambiental se llevó a cabo por medio de la utilización de la Escala del Comportamiento Pro-ambiental desarrollada por Corral-Verdugo unida a la escala de Reciclaje de Sidique. Para el tratamiento estadístico se empleó el análisis de regresión lineal múltiple. Resultados: La mayoría de los encuestados fueron hombres (55%), con una mediana de edad de 37,5 años. Más de la mitad tenía por lo menos formación en pregrado (53%), el 55,5% contaban con un empleo al momento de la entrevista, cerca del 50% de las personas refirieron tener casa propia y la mediana del tamaño de las mismas fue de 80 m2. De los aspectos sociodemográficos, el tipo de vivienda, sexo y edad, estuvieron relacionados con los factores ambientales pro reciclaje. Mientras que las conductas proambientales relacionadas fueron: altruismo, frugalidad, conducta ecológica general, indignación y aprecio por la naturaleza. Conclusiones: Las conductas proambientales Altruismo, Frugalidad, Conducta Ecológica, Indignación y Aprecio por lo natural, están relacionadas con la intención de reciclar. Para futuras investigaciones es necesario constatar la realización del comportamiento proambiental, para aseverar de manera irrebatible que las dimensiones analizadas pueden soportar una acción real y no un auto reporte de una conducta.

Percurso profissional. Destaque para a análise da produção de resíduos urbanos no Alentejo Central - portugal e utilização do modelo DEA na definição da meta da recolha seletiva

Neste trabalho de Projeto efetua-se o desenvolvimento do tema da produção de Resíduos Urbanos (RU) no Alentejo Central, utilizando-se o modelo DEA (Data Envelopment Analysis) para a análise das metas da recolha seletiva estabelecidas para 2020. Genericamente, quanto maior é o grau de desenvolvimento económico de um território, maior é a taxa de urbanização e maior é também a quantidade de resíduos urbanos produzidos por habitante. O rendimento e a urbanização são variáveis altamente correlacionadas, quando aumenta o rendimento disponível e os padrões de vida, aumenta também o consumo de bens e serviços de modo correspondente, o que leva ao aumento da quantidade de resíduos gerados. Assim, tendo em conta os impactos locais que os RU abandonados trazem, e com o objetivo de quebrar o elo entre crescimento económico e os impactos ambientais associados à produção de resíduos, são implementadas, nos países com elevados níveis de desenvolvimento, políticas baseadas em modelos integrados de gestão de RU que permitem a recuperação, reciclagem e valorização dos materiais, reservando-se a eliminação (deposição em aterro) para frações não valorizáveis, o que gera empregos e riqueza. Em Portugal vigora o Plano Estratégico para os Resíduos Urbanos (PERSU 2020) que define objetivos e metas nacionais, nomeadamente a meta da recolha seletiva, estabelecendo para 2020 um quantitativo nacional mínimo a recuperar de 47 kg por habitante por ano. Deste modo, importa caracterizar, para o período de 2002 a 2012, como evoluiu a produção de RU em comparação com a evolução do PIB em Portugal. A análise foca-se então na produção de RU na região do Alentejo em particular no Alentejo Central que evidencia um elevado nível per capita em comparação com o resto do país, situando-se mesmo acima das regiões do grande Porto e Lisboa. São apresentadas possíveis razões para o registo destes elevados níveis de produção de RU não se conseguindo, no entanto, avançar com evidências. Como o modelo DEA é utilizado no PERSU 2020 para fundamentar a projeção das metas da recolha seletiva por sistema de gestão de resíduos urbanos, fez-se a sua reprodução, o que permitiu uma análise mais detalhada dos dados e o ensaio de novos resultados considerando, para além do nível de produção de RU, o numero de equipamentos de deposição de recolha seletiva como input do modelo; Abstract: Title of the report: Professional career. Emphasis on the analysis of urban waste production in Alentejo Central - Portugal and the use of the DEA in defining the separate collection target This professional report presents the theme of the Urban Waste (UW) production in Central Alentejo, using the DEA (Data Envelopment Analysis) to analyse the target set for selective collection in 2020. Generally, the higher the degree of economic development of a region, the greater the rate of urbanization and the greater also the amount of municipal waste produced per capita. The variables income and urbanization are highly correlated, if you have an increase in the disposable income and living standards, the consumption of goods and services will increase accordingly, which leads to the increase of the amount of produced waste. Thus, taking into account the local impact that the abandoned UW brings, and in order to break the link between economic growth and the environmental impacts associated with the production of waste, countries with high levels of development implement policies based on integrated UW management models that allow the recovery, recycling and valorisation of materials, restricting the disposal (landfill) to non-recoverable fractions, which creates jobs and wealth. Portugal established a national strategic plan for Urban Waste (PERSU 2020) which defines the goals and national targets, including the selective collection target stating for 2020 a minimum recover of 47 kg per capita per year. Then it is relevant to characterize and compare the evolution of UW production and GDP in Portugal for the period 2002 to 2012. The analysis then focuses on the production of UW in Alentejo, particularly in Central Alentejo region, which shows a high per capita level compared to the rest of the country, placed just above the Greater Porto and Lisbon region. Then we explore several possible reasons for this high level of UW production in this region, but none is successful in producing strong evidence. As the DEA is used in PERSU 2020 to support the projection of the selective collection targets for the municipal waste management systems, in this report we develop the model, which allowed access to the data and a more detailed analyse. Then we introduce and test a new input, the number of separate collection deposition equipment, which gives new results that are compared with the original ones.

SELECCIÓN DE ÁREAS PROPICIAS PARA LA INSTALACIÓN DE RELLENOS SANITARIOS, PROVINCIA DE HEREDIA

Durante la década de los años 90 Costa Rica tomó conciencia del problema que significa el mal manejo de los desechos sólidos. En la provincia de Heredia durante estos años se formó una comisión interinstitucional e intermunicipal con el objetivo de darle una solución integral provincial a esta problemática. La Universidad Nacional, a través de la Escuela de Ciencias Geográficas (Progra­ma Morfoclimatología Aplicada y Dinámica Exógena, MADE), formó parte de esta comisión, para la cual realizó la primera etapa de un estudio tendiente a identificar los sitios óptimos para la instalación de un relleno sanitario provincial. La metodología utilizada se basó en la que se desarrolló en el Plan Nacional de Manejo de Desechos elaborado por el Gobierno de Costa Rica y la GTZ (Deutsche Gesellschaft für Technische Zusammenarbeit). Se identificaron cinco áreas técnicamente aptas, todas en el sector sur de la provincia, estas, dos presentan las condiciones menos adversas y, por lo tanto, consideran las áreas candidatas, estas se ubican al este de la provincia y son parte del cantón de San Isidro. Se recomienda realizar los estudios de detalle, considerados indispensables. En este sentido, recientemente la Empresa de Servicios Públicos Heredia (ESPH) ha utilizado como base esta investigación para efectuar mencionados estudios. ABSTRACT During the 1990s, Costa Rica began concentrating on the problem of poor  solid waste management. In the province of Heredia during these years, inter-institutional and inter-municipal commission was formed to seek integral solution to this problem at the province level. The Universic Nacional in Costa Rica, through the School of Geographical Sciences (Progr Morfoclimatología Aplicada y Dinámica Exógena, MADE), formed part of this commission and did a preliminary study in order to identify the optimum sites for installing a provincial sanitary refill. The methodology used was based on the one developed in the National Waste Management Plan designed by the government of Costa Rica and German agency GTZ (Deutsche Gesellschaft für Technische Zusammenarbeit ). Five technically suitable áreas were identified, all located in the southern sec of the province. Of these, two present less adverse conditions and therefore considered candidate áreas. These are located in the eastern part of this sector  and are in the cantón of San Isidro. Further detailed studies are recommended and are considered crucial, this sense, the Empresa de Servicios Públicos de Heredia (ESPH) has utilized this research as base study to perform the abo ve mentioned studies.

System innovation and life cycle thinking in packaging value chain: the circularity of plastics.

Compared to other, plastic materials have registered a strong acceleration in production and consumption during the last years. Despite the existence of waste management systems, plastic_based materials are still a pervasive presence in the environment, with negative consequences on marine ecosystem and human health. The recycling is still challenging due to the growing complexity of product design, the so-called overpackaging, the insufficient and inadequate recycling infrastructure, the weak market of recycled plastics and the high cost of waste treatment and disposal. The Circular economy package, the European Strategy for plastics in a circular economy and the recent European Green Deal include very ambitious programmes to rethink the entire plastic value chain. As regards packaging, all plastic packaging will have to be 100% recyclable (or reusable) and 55% recycled by 2030. Regions are consequently called upon to set up a robust plan able to fit the European objectives. It takes on greater importance in Emilia Romagna where the Packaging valley is located. This thesis supports the definition of a strategy aimed to establish an after-use plastics economy in the region. The PhD work has set the basis and the instruments to establish the so-called Circularity Strategy with the aim to turn about 92.000t of plastic waste into profitable secondary resources. System innovation, life cycle thinking and participative backcasting method have allowed to deeply analyse the current system, orientate the problem and explore sustainable solutions through a broad stakeholder participation. A material flow analysis, accompanied by a barrier analysis, has supported the identification of the gaps between the present situation and the 2030 scenario. Eco-design for and from recycling (and a mass _based recycling rate (based on the effective amount of plastic wastes turned into secondary plastics), valorized by a value_based indicator, are the key-points of the action plan.

Purple bacteria for the biotechnological valorisation of agro-industrial streams

Waste management worldwide has received increasing attention from global policies in recent years. In particular, agro-industrial streams represent a global concern due to the huge volumes generated and a high number of residues, which produce an environmental and economic impact on the ecosystem. The use of biotechnological approaches to treat these streams could allow the production of desirable by-products to be reinjected into the production cycle through sustainable processes. Purple phototrophic bacteria (PPB) are targeted as microorganisms capable to reduce the pressure of agro-industrial streams on environmental issues, due to their metabolic versatility (autotrophic and/or heterotrophic growth under different conditions). This Ph.D. research project aims to assess the effectiveness of PPB cultivation for industrial streams valorisation in the applications of biogas desulfurization and microbial protein production. For these purposes, the first part of the present work is dedicated to the cultivation of purple sulfur bacteria (PSB) for biogas streams upgrading, cleaning biogas from sulfur compounds (H2S), and producing elemental sulfur (S0), potentially suitable as a slow-release fertilizer. The second part of the thesis, instead, sees the application of purple non-sulfur bacteria (PNSB) on streams rich in organics, such as molasses, generating biomass with high content of proteins and pigments, useful as supplements in animal feed. The assessment of the main metabolic mechanisms involved in the two processes is evaluated at a laboratory scale using flasks and a photobioreactor, to define the consumption of substrates and the accumulation of products both in the autotrophic (on biogas) and in heterotrophic grow (on molasses). In conclusion, the effectiveness of processes employing PPB for a sustainable valorisation of several agro-industrial streams has been proved promising, using actual residues, and coupling their treatments with the production of added-value by-products.

Analytical pyrolysis to study microplastics and other polymers in the environment

Synthetic polymers constitute a wide class of materials which has enhanced the quality of human life, providing comforts and innovations. Anyway, the increasing production and the incorrect waste management, are leading to the occurrence of polymers in the environment, generating concern. To understand the extent of this issue, analytical investigation holds an essential position. Standardised methods have not established yet, and additional studies are required to improve the present knowledge. The main aim of this thesis was to provide comprehensive information about the potential of pyrolysis coupled with gas-chromatography and mass spectrometry (Py-GC-MS) for polymers investigation, from their characterisation to their identification and quantification in complex matrices. Water-soluble (poly(dimethylsiloxanes), PDMS bearing poly(ethylene glycol), PEG, side chains) and water-insoluble polymers (microplastics, MPs, and bioplastics) were studied. The different studies revealed the possibility to identify heterogeneous classes of polymers, fingerprinting the presence of PDMS copolymers and distinguishing chemically different polyurethanes (PURs). The occurrence of secondary reactions in pyrolysis of polymer mixtures was observed as possible drawback. Pyrolysis products indicative of secondary reactions and their reaction mechanisms were identified. Py-GC-MS also revealed its fundamental role for the identification of polymers composing commercial bioplastics items based. The results aided to identify chemicals that have the potential to migrate in sea waters. Investigations of environmental samples demonstrated the capability of Py-GC-MS to provide reliable, reproducible and comparable results about polymers in complex matrices (PEG-PDMS in sewage sludges and PURs and other MPs in road dusts and spider webs). Criticisms were especially found in quantitation, such as the retrieval reference materials, the construction of reliable calibration protocols and the occurrence of bias due to interferences between pyrolysis products. This thesis pursues the greater purpose to develop harmonised and standardised methods for environmental investigations of polymers, that is fundamental to assess the real state of the environment.

Sustainability and environmental impact of the Italian ceramic tile industry

The increasing consumption rates among citizens and the uncontrolled exploitation of natural resources have made environmental pollution and management of waste the main problems facing humanity in its upcoming future. Together with generation of energy and transport, industrial production certainly plays a key role in the genesis of these problems. It is for this reason that the concepts of environmental, social and economic sustainability have emerged over the years as the cornerstones for future development. In light of this, the most forward-looking industries have begun to study their impact on environment and society in order to improve their performances and, at the same time, to anticipate the increasingly rigorous environmental regulations. In this work, various performance indicators related to the Italian ceramic tile sector will be presented and discussed. In particular, the emission factor of characteristic pollutants will be reported on a period of up to fifteen years while data regarding waste management, concentration of pollutants and emission legal limits for the last decade will be here disclosed as a result of a vast analysis on recorded data. The collected information describes the present level of performance of the ceramic tile manufacturing industries in Italy and shows how recycling is now a consolidated reality and how some pollutants, such as particulate matter, fluorine and lead are actually disappearing from production processes and how others, such as volatile organic compounds, are increasing instead. Moreover, the adoption of alternative raw materials for the production of ceramic tiles is discussed and the implementation of the recycling of various waste is addressed at experimental or industrial scale. Finally, the development of a new ceramic engobe with high content of waste glass (20%) is presented as an experimental example of reutilization of resources in the ceramic tile industry.

Management of agricultural waste on a sample of farms on the island of São Miguel (Açores)

Dissertação de Mestrado em Ambiente, Saúde e Segurança.

Management of corn stalk waste as reinforcement for polypropylene injection moulded composites

The main objective of this study was the management of corn stalk waste as reinforcement for polypropylene (PP) injection moulded composites as an alternative to wood flour and fibers. In the first step, corn stalk waste was subjected to various treatments, and four different corn stalk derivatives (flour and fibers) able to be used as reinforcement of composite materials were prepared and characterized. These derivatives are corn stalk flour, thermo-mechanical, semi-chemical, and chemical fibers. They were characterized in terms of their yield, lignin content, Kappa number, fiber length/diameter ratio, fines, coarseness, viscosity, and the length at the break of a standard sheet of paper. Results showed that the corn stalk derivatives have different physico-chemical properties. In the second step, the prepared flour and fibers were explored as a reinforcing element for PP composites. Coupled and non-coupled PP composites were prepared and tested for tensile properties. For overall trend, with the addition of a coupling agent, tensile properties of composites significantly improved, as compared with non-coupled samples. In addition, a morphological study revealed the positive effect of the coupling agent on the interfacial bonding. The composites prepared with semichemical fiber gave better results in comparison with the rest of the corn stalk derivatives due to its chemical characteristics

Empirical analysis of solid management waste costs: Some evidence from Galicia, Spain

This paper analyses the factors that determine solid waste service costs. The empirical analysis is based on information derived from a survey conducted in a sample of Galician municipalities. The results reveal economies of scale in municipalities of fewer than 50,000 inhabitants, such that cooperation between these municipalities could lead to cost savings. It also appears that private delivery is not cheaper than public delivery. Finally, designating a larger proportion of the total waste volume to recycling does not imply greater costs.

Management of Port Solid Waste Framework

One of contemporary environmental issues refers to progressive and diverse generation of solid waste in urban areas or specific, and requires solutions because the traditional methods of treatment and disposal are becoming unviable over the years and, consequently, a significant contingent of these wastes presents final destination inappropriate. The diversity of solid waste generated as a result of human activities must have the appropriate allocation to specific legislation in force, such as landfill, incineration, among other procedures established by the competent bodies. Thus, also the waste generated in port activities or proceeding vessels require classification and segregation for proper disposal later. This article aims at presenting a methodology for the collection, transportation, treatment and disposal of solid waste port and also application of automation technology that makes possible the implementation of the same.