Application of organo-beidellites for the adsorption of atrazine

The surfaces of natural beidellite were modified with cationic surfactant octadecyl trimethylammonium bromide at different concentrations. The organo-beidellite adsorbent materials were then used for the removal of atrazine with the goal of investigating the mechanism for the adsorption of organic triazine herbicide from contaminated water. Changes on the surfaces and structure of beidellite were characterised by X-ray diffraction (XRD), thermogravimetric analysis (TGA), Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM) and BET surface analysis. Kinetics of the adsorption studies were also carried out which show that the adsorption capacity of the organoclays increases with increasing surfactant concentration up until 1.0 CEC surfactant loading, after which the adsorption capacity greatly decreases. TG analysis reveals that although the 2.0 CEC sample has the greatest percentage of surfactant by mass, most of it is present on external sites. The 0.5 CEC sample has the highest proportion of surfactant exchanged into the internal active sites and the 1.0 CEC sample accounts for the highest adsorption capacity. The goodness of fit of the pseudo-second order kinetic confirms that chemical adsorption, rather than physical adsorption, controls the adsorption rate of atrazine.

From certificate chasing to genuine engagement : the contribution of curriculum design to students' career intent in a subfield

Many students enter business degrees without a defined career goal beyond working in the business world and adopt a scattergun approach to employability by accumulating certifications accessed through individual subjects. Yet, space and time limitations commonly prevent extended exposure to rewarding and interesting career subfields within main specialisations. This case study draws on student feedback collected over three years exploring students’ career interest following an elective human resource development subject in the final stage of a human resources major. Project-based curriculum provided students with scaffolded learning while undertaking key multiphase human resource development tasks. Subsequently, students reported human resource development career interest and intent, attributed to more realistic appreciation of human resource development’s activities, scope, and values. The paper makes an important contribution illustrating how curriculum design can transform instrumentalism into logically, emotionally, and intuitively based career engagement. Further, human resource development is a study and career area little mentioned in higher education or careers literature.

High order unconditionally stable difference schemes for the Riesz space-fractional telegraph equation

In this paper, a class of unconditionally stable difference schemes based on the Pad´e approximation is presented for the Riesz space-fractional telegraph equation. Firstly, we introduce a new variable to transform the original dfferential equation to an equivalent differential equation system. Then, we apply a second order fractional central difference scheme to discretise the Riesz space-fractional operator. Finally, we use (1, 1), (2, 2) and (3, 3) Pad´e approximations to give a fully discrete difference scheme for the resulting linear system of ordinary differential equations. Matrix analysis is used to show the unconditional stability of the proposed algorithms. Two examples with known exact solutions are chosen to assess the proposed difference schemes. Numerical results demonstrate that these schemes provide accurate and efficient methods for solving a space-fractional hyperbolic equation.

The ways of things: Objects in the studio

Conventions of the studio presuppose the artist as the active agent, imposing his/her will upon and through objects that remain essentially inert. However, this characterisation of practice overlooks the complex object dynamics that underpin the art-making process. Far from passive entities, objects are resistant, ‘speaking back’ to the artist, impressing their will upon their surroundings. Objects stick to one another, fall over, drip, spill, spatter and chip one another. Objects support, dismantle, cover and transform one another. Objects are both the apparatus of the studio and its products. It can be argued that the work of art is as much shaped by objects as it is by human impulse. Within this alternate ontology, the artist becomes but one element in a constellation of objects. Drawing upon Graham Harman’s Object-Oriented Ontology and a selection of photographs of my studio processes, this practice-led paper will explore the notion of agentive objects and the ways in which the contemporary art studio can be reconsidered as a primary site for the production of new object relationships.

But how do we know they watched it? Adapting to the flipped classroom conundrum

Those who teach film and media need to use screen content to illustrate their subjects. For example, students want illustrations to accompany lectures on film or television genres. Our experience has been that student access to the film and television screen content underpinning a study of genres is not only desirable but is, in fact, crucial for effective teaching and learning outcomes. Not so long ago, a screening during or at the completion of a lecture was the expected method by which educators delivered screen content to illustrate their teaching. Even if student attendance fluctuated from week to week a quick head count confirmed that a certain number of students were physically present. It was assumed that this physical attendance encouraged students to reflect upon and contextualize the material post lecture. While simply attending a lecture will not translate into actual student learning, it does demonstrate a willingness by students to engage with the course content by making a commitment to attend a scheduled and recurring lecture and screening program. However, as flipped classroom models gain acceptance in educational institutions, this traditional lecture-screening model is giving way to online, off-site, and student-controlled mechanisms for screen content delivery and viewing. Nevertheless, care should be taken when assessing how online delivery translates into student engagement and learning. As Junco (2012) points out, “it’s not the technology that generates learning, but the ways in which the technology are used.” Discussed, debated, and embraced to varying degrees by educators, there remains no definitive model for the flipped classroom – although many models involve ‘flipping’ content and knowledge acquisition (including viewing films and television shows) from scheduled on-campus classes to online material viewed by students in advance of an on-campus lecture or class. The classroom or tutorial room then becomes a space to problem-solve, engage in collaborate learning, and advance and explain concepts. From an institutional perspective, the flipped classroom model could deliver an additional benefit beyond immediate pedagogical concerns. Tucker (2012) suggests through the flipped classroom model “all aspects of instruction can be rethought to best maximize the scarcest learning resource — time.” The narrative most often associated with this shift is that the move to online content delivery of lecture and cinematic / televisual material may also provide educators with more time to do other work such as engage in research, plan strategies to empower students. Experimentation with the flipped classroom model is playing out in various educational institutions. Yet several core concerns remain — one of these concerns is the crucial question of whether an online/digital flipped approach is more effective for student engagement and learning than the traditional lecture-screening mode for screen content delivery. Some urge caution in this regard, arguing that “new technology isn’t always supported by change management and professional development to ensure that digital isn’t just a goal within itself, but actually helps to transform education” (Fleming cited in Blain 2014). The most fundamental concern remains how do lecturers, instructors, and tutors know students have watched the films and television shows associated with a subject? The remainder of this discussion deals with these concerns, and possible solutions offered, through an analysis of the Film, Television and Screen Genres subject at the Queensland University of Technology (QUT) in Brisbane, Queensland.

Towards Self-improving School Systems: Lessons from a City Challenge

This important new book draws lessons from a large-scale initiative to bring about the improvement of an urban education system. Written from an insider perspective by an internationally recognized researcher, it presents a new way of thinking about system change. This builds on the idea that there are untapped resources within schools and the communities they serve that can be mobilized in order to transform schools from places that do well for some children so that they can do well for many more. Towards Self-improving School Systems presents a strategic framework that can help to foster new, more fruitful working relationships: between national and local government; within and between schools; and between schools and their local communities. What is distinctive in the approach is that this is mainly led from within schools, with senior staff having a central role as system leaders. The book will be relevant to a wide range of readers throughout the world who are concerned with the strengthening of their national educational systems, including teachers, school leaders, policy makers and researchers. The argument it presents is particularly important for the growing number of countries where increased emphasis on school autonomy, competition and choice is leading to fragmentation within education provision.

Evolved gas analysis of coal-derived pyrite/marcasite

The products evolved during the thermal decomposition of the coal-derived pyrite/marcasite were studied using simultaneous thermogravimetry coupled with Fourier-transform infrared spectroscopy and mass spectrometry (TG-FTIR–MS) technique. The main gases and volatile products released during the thermal decomposition of the coal-derived pyrite/marcasite are water (H2O), carbon dioxide (CO2), and sulfur dioxide (SO2). The results showed that the evolved products obtained were mainly divided into two processes: (1) the main evolved product H2O is mainly released at below 300 °C; (2) under the temperature of 450–650 °C, the main evolved products are SO2 and small amount of CO2. It is worth mentioning that SO3 was not observed as a product as no peak was observed in the m/z = 80 curve. The chemical substance SO2 is present as the main gaseous product in the thermal decomposition for the sample. The coal-derived pyrite/marcasite is different from mineral pyrite in thermal decomposition temperature. The mass spectrometric analysis results are in good agreement with the infrared spectroscopic analysis of the evolved gases. These results give the evidence on the thermal decomposition products and make all explanations have the sufficient evidence. Therefore, TG–MS–IR is a powerful tool for the investigation of gas evolution from the thermal decomposition of materials.

Thermal behavior of kaolinite–urea intercalation complex and molecular dynamics simulation for urea molecule orientation

The thermal behavior of kaolinite–urea intercalation complex was investigated by thermogravimetry–differential scanning calorimetry (TG–DSC), X-ray diffraction (XRD), and fourier transform infrared spectroscopy (FTIR). In addition, the interaction mode of urea molecules intercalated into the kaolinite gallery was studied by means of molecular dynamics simulation. Three main mass losses were observed at 136 °C, in the range of 210–270 °C, and at 500 °C in the TG–DSC curves, which were, respectively, attributed to (1) melting of the surface-adsorbed urea, (2) removal of the intercalated urea, and (3) dehydroxylation of the deintercalated kaolinite. The three DSC endothermic peaks at 218, 250, and 261 °C were related to the successive removals of intercalated urea with three different distribution structures. Based on the angle between the dipole moment vector of urea and the basal surface of kaolinite, the three urea models could be described as follows: (1) Type A, the dipole moment vector is nearly parallel to the basal surface of kaolinite; (2) Type B, the dipole moment vector points to the silica tetrahedron with the angle between it and the basal surface of kaolinite ranging from 20°to 40°; and (3) Type C, the dipole moment vector is nearly perpendicular to the basal surface of kaolinite. The three distribution structures of urea molecules were validated by the results of the molecular dynamics simulation. Furthermore, the thermal behavior of the kaolinite–urea intercalation complex investigated by TG–DSC was also supported by FTIR and XRD analyses.

The provision of visitable housing in Australia: Down to the detail

In response to the ratification of the United Nations Convention of the Rights of People with Disabilities (CRPD), Australian housing industry leaders, supported by the Australian Government, committed to transform their practices voluntarily through the adoption of a national guideline, called Livable Housing Design. They set a target in 2010 that all new housing would be visitable by 2020. Research in this area suggests that the anticipated voluntary transformation is unrealistic and that mandatory regulation will be necessary for any lasting transformation to occur. It also suggests that the assumptions underpinning the Livable Housing Design agreement are unfounded. This paper reports on a study that problematised these assumptions. The study used eleven newly-constructed dwellings in three housing contexts in Brisbane, Australia. It sought to understand the logics-of-practice in providing, and not providing, visitable housing. By examining the specific details that make a dwelling visitable, and interpreting the accounts of builders, designers and developers, the study identified three logics-of-practice which challenged the assumptions underpinning the Livable Housing Design agreement: focus on the point of sale; an aversion to change and deference to external regulators on matters of social inclusion. These were evident in all housing contexts indicating a dominant industry culture regardless of housing context or policy intention. The paper suggests that financial incentives for both the builder and the buyer, demonstration by industry leaders and, ultimately, national regulation is a possible pathway for the Livable Housing Design agreement to reach the 2020 goal. The paper concludes that the Australian Government has three options: to ignore its obligations under the CRPD; to revisit the Livable Housing Design agreement in the hope that it works; or to regulate the housing industry through the National Construction Code to ensure the 2020 target is reached.

Tailoring surface properties and structure of layered double hydroxides using silanes with different number of functional groups

Four silanes, trimethylchlorosilane (TMCS), dimethyldiethoxylsilane (DMDES), 3-aminopropyltriethoxysilane (APTES) and tetraethoxysilane (TEOS), were adopted to graft layered double hydroxides (LDH) via an induced hydrolysis silylation method (IHS). Fourier transform infrared spectra (FTIR) and 29Si MAS nuclear magnetic resonance spectra (29Si MAS NMR) indicated that APTES and TEOS can be grafted onto LDH surfaces via condensation with hydroxyl groups of LDH, while TMCS and DMDES could only be adsorbed on the LDH surface with a small quantity. A combination of X-ray diffraction patterns (XRD) and 29Si MAS NMR spectra showed that silanes were exclusively present in the external surface and had little influence on the long range order of LDH. The surfactant intercalation experiment indicated that the adsorbed and/or grafted silane could not fix the interlamellar spacing of the LDH. However, they will form crosslink between the particles and affect the further surfactant intercalation in the silylated samples. The replacement of water by ethanol in the tactoids and/or aggregations and the polysiloxane oligomers formed during silylation procedure can dramatically increase the value of BET surface area (SBET) and total pore volumes (Vp) of the products.

Silylation of mechanically ground kaolinite

Silylated kaolinites were synthesized at 80°C without the use of inert gas protection. The method presented started with mechanical grinding of kaolinite, followed by grafting with 3-aminopropyltriethoxysilane (APTES). The mechanical grinding treatment destroyed the ordered sheets of kaolinite, formed fine fragments and generated broken bonds (undercoordinated metal ions). These broken bonds served as new sites for the condensation with APTES. Fourier transform infrared spectroscopy (FTIR) confirmed the existence of –CH2 from APTES. 29Si cross-polarization magic-angle spinning nuclear magnetic resonance spectroscopy (29Si CP/MAS NMR) showed that the principal bonding mechanism between APTES and kaolinite fitted a tridentate silylation model (T3) with a chemical shift at 66.7 ppm. The silane loadings of the silylated samples were estimated from the mass loss obtained by TG-DTG curves. The results showed that the 6-hour ground kaolinite could be grafted with the most APTES (7.0%) using cyclohexane as solvent. The loaded amount of APTES in the silylated samples obtained in different solvents decreased in the order as: nonpolar solvent > polar solvent with low dielectric constant (toluene) > polar solvent with high dielectric constant (ethanol).

Influence of the structural characteristic of pyrolysis products on thermal stability of styrene-butadiene rubber composites reinforced by different particle sized kaolinites

A series of rubber composites were prepared by blending styrene-butadiene rubber (SBR) latex and the different particle sized kaolinites. The thermal stabilities of the rubber composites were characterized using thermogravimetry, digital photography, scanning electron microscopy, X-ray diffraction, Fourier transform infrared spectroscopy, and Raman spectroscopy. Kaolinite SBR composites showed much greater thermal stability when compared with that of the pure SBR. With the increase of kaolinite particle size, the pyrolysis products became much looser; the char layer and crystalline carbon content gradually decreased in the pyrolysis residues. The pyrolysis residues of the SBR composites filled with the different particle sized kaolinites showed some remarkable changes in structural characteristics. The increase of kaolinite particle size was not beneficial to form the compact and stable crystalline carbon in the pyrolysis process, and resulted in a negative influence in improving the thermal stability of kaolinite/SBR composites.

Application of higher-order spectra for automated grading of diabetic maculopathy

Diabetic macular edema (DME) is one of the most common causes of visual loss among diabetes mellitus patients. Early detection and successive treatment may improve the visual acuity. DME is mainly graded into non-clinically significant macular edema (NCSME) and clinically significant macular edema according to the location of hard exudates in the macula region. DME can be identified by manual examination of fundus images. It is laborious and resource intensive. Hence, in this work, automated grading of DME is proposed using higher-order spectra (HOS) of Radon transform projections of the fundus images. We have used third-order cumulants and bispectrum magnitude, in this work, as features, and compared their performance. They can capture subtle changes in the fundus image. Spectral regression discriminant analysis (SRDA) reduces feature dimension, and minimum redundancy maximum relevance method is used to rank the significant SRDA components. Ranked features are fed to various supervised classifiers, viz. Naive Bayes, AdaBoost and support vector machine, to discriminate No DME, NCSME and clinically significant macular edema classes. The performance of our system is evaluated using the publicly available MESSIDOR dataset (300 images) and also verified with a local dataset (300 images). Our results show that HOS cumulants and bispectrum magnitude obtained an average accuracy of 95.56 and 94.39 % for MESSIDOR dataset and 95.93 and 93.33 % for local dataset, respectively.

Fault detection of wind turbine drivetrain utilizing power-speed characteristics

Wind energy, being the fastest growing renewable energy source in the present world, requires a large number of wind turbines to transform wind energy into electricity. One factor driving the cost of this energy is the reliable operation of these turbines. Therefore, it is a growing requirement within the wind farm community, to monitor the operation of the wind turbines on a continuous basis so that a possible fault can be detected ahead of time. As the wind turbine operates in an environment of constantly changing wind speed, it is a challenging task to design a fault detection technique which can accommodate the stochastic operational behavior of the turbines. Addressing this issue, this paper proposes a novel fault detection criterion which is robust against operational uncertainty, as well as having the ability to quantify severity level specifically of the drivetrain abnormality within an operating wind turbine. A benchmark model of wind turbine has been utilized to simulate drivetrain fault condition and effectiveness of the proposed technique has been tested accordingly. From the simulation result it can be concluded that the proposed criterion exhibits consistent performance for drivetrain faults for varying wind speed and has linear relationship with the fault severity level.

Reliable fault diagnosis for incipient low-speed bearings using fault feature analysis based on a binary bat algorithm

In this paper, we propose a highly reliable fault diagnosis scheme for incipient low-speed rolling element bearing failures. The scheme consists of fault feature calculation, discriminative fault feature analysis, and fault classification. The proposed approach first computes wavelet-based fault features, including the respective relative wavelet packet node energy and entropy, by applying a wavelet packet transform to an incoming acoustic emission signal. The most discriminative fault features are then filtered from the originally produced feature vector by using discriminative fault feature analysis based on a binary bat algorithm (BBA). Finally, the proposed approach employs one-against-all multiclass support vector machines to identify multiple low-speed rolling element bearing defects. This study compares the proposed BBA-based dimensionality reduction scheme with four other dimensionality reduction methodologies in terms of classification performance. Experimental results show that the proposed methodology is superior to other dimensionality reduction approaches, yielding an average classification accuracy of 94.9%, 95.8%, and 98.4% under bearing rotational speeds at 20 revolutions-per-minute (RPM), 80 RPM, and 140 RPM, respectively.