Do expertise and the degree of perception-action coupling affect natural anticipatory performance?

Two experiments using a temporal occlusion paradigm (the first with expert and novice participants and the second with participants of intermediate skill) were conducted to examine the capability of tennis players to predict the direction of an opponent's service in situ. In both experiments two different response conditions, reflecting differing degrees of perception-action coupling, were employed. In a coupled condition players were required to make a movement-based response identical to that which they would use to hit a return of service in a game situation, whereas in an uncoupled condition a verbal prediction of service direction was required. Experiment 1 provided clear evidence of superior prediction accuracy under the coupled response condition when ball flight was available, plus some limited evidence to suggest that superior prediction accuracy under uncoupled response conditions might hold true if only advance (pre-contact) information was available. Experiment 2 showed the former finding to be a robust one, but was unable to reveal any support for the latter. Experiment 1 also revealed that expert superiority is more apparent for predictions made under natural (coupled) than uncoupled response-mode conditions. Collectively, these findings suggest that different perceptual processes may be in operation in anticipatory tasks which depend on skill level, the type of information presented, and degree of perception-action coupling inherent in the task requirements.

Nitrification of high strength ammonia wastewtaer treatment - process selection is the major factor.

Biological nitrogen removal via the nitrite pathway in wastewater treatment is very important in Saving the cost of aeration and as an electron donor for denitrification. Wastewater nitrification and nitrite accumulation were carried out in a biofilm airlift reactor with autotrophic nitrifying biofilm. The biofilm reactor showed almost complete nitrification and most of the oxidized ammonium was present as nitrite at the ammonium load of 1.5 to 3.5 kg N/m3.d. Nitrite accumulation was stably achieved by the selective inhibition of nitrite oxidizers with free ammonia and dissolved oxygen limitation. Stable 100% conversion to nitrite could also be achieved even under the absence of free ammonia inhibition on nitrite oxidizers. Batch ammonium oxidation and nitrite oxidation with nitrite accumulating nitrifying biofilm showed that nitrite Oxidation was completely inhibited when free ammonia is higher than 0.2 mg N/L. However, nitrite oxidation activity was recovered as soon as the free ammonia concentration was below the threshold level when dissolved oxygen concentration was not the limiting factor. Fluorescence in situ hybridization analysis of cryosectioned nitrite accumulating nitrifying biofilm showed that the β-subclass of Proteobacteria, where ammonia oxidizers belong, was distributed outside the biofilm whereas the α-subclass of Proteobacteria, where nitrite oxidizers belong, was found mainly in the inner part of the biofilm. It is likely that dissolved oxygen deficiency or limitation in the inner part of the nitrifying biofilm, where nitrite oxidizers exist, is responsible for the complete shut down of the nitrite oxidizers activity under the absence of free ammonia inhibition.

A global health problem caused by arsenic from natural sources

Arsenic is a carcinogen to both humans and animals. Arsenicals have been associated with cancers of the skin, lung, and bladder. Clinical manifestations of chronic arsenic poisoning include non-cancer end point of hyper- and hypo-pigmentation, keratosis, hypertension, cardiovascular diseases and diabetes. Epidemiological evidence indicates that arsenic concentration exceeding 50 mug l(-1) in the drinking water is not public health protective. The current WHO recommended guideline value for arsenic in drinking water is 10 mug l(-1), whereas many developing countries are still having a value of 50 mug 1(-1). It has been estimated that tens of millions of people are. at risk exposing to excessive levels of arsenic from both contaminated water and arsenic-bearing coal from natural sources. The global health implication and possible intervention strategies were also discussed in this review article. (C) 2003 Elsevier Ltd. All rights reserved.

Effect of time of harvest of budded virus on the selection of baculovirus FP mutants in cell culture

Rapid formation and selection of FP (few polyhedra) mutants occurs during serial passaging of Helicoverpa armigera nucleopolyhedrovirus (HaSNPV) in insect cell culture. The production of HaSNPV for use as biopesticides requires the passaging of the virus over a number of passages to produce enough virus inoculum for large-scale fermentation. During serial passaging in cell culture, FP mutants were rapidly selected, resulting in declined productivity and reduced potency of virus. Budded virus (BV) is usually harvested between 72 and 96 h postinfection (hpi) in order to obtain a high titer virus stock. In this study, the effect of tine of harvest (TOH) for BV on the selection rate of HaSNPV FP mutants during serial passaging was investigated. BV were harvested at different times postinfection, and each series was serially passaged for six passages. The productivity and percentage of FP mutants at each passage were determined. It was found that the selection of FP mutants can he reduced by employing an earlier TOH for BV. Serial passaging with BV harvested at 48 hpi showed a slower accumulation of FP mutants compared to that of BV harvested after 48 hpi. Higher cell specific yields were also maintained when BV were harvested at 48 hpi. When BV that were formed between 48 and 96 hpi were harvested and serially passaged, FP mutants quickly dominated the virus population. This suggests that the V formed and released between 48 and 96 hpi are most likely from FP mutant infected cells.

Resistência natural da madeira de sete espécies de eucalipto ao apodrecimento

A resistência natural ao apodrecimento se constitui numa importante propriedade da madeira. Em se tratando das madeiras provenientes do gênero Eucalyptus, tal atributo se torna ainda mais importante, uma vez que tais madeiras são, na grande maioria das vezes, de difícil tratabilidade pelos métodos de tratamento convencionais. O objetivo do presente trabalho foi determinar a resistência natural da madeira de sete espécies de eucalipto em ensaio acelerado de laboratório ao fungo causador da podridão-parda Gloeophyllum trabeum. Foram ensaiadas madeiras das espécies de Corymbia citriodora, Eucalyptus tereticornis, E. paniculata, E. pilularis, E. cloeziana, E. urophylla e E. grandis com 16 anos de idade, que cresceram na Estação Experimental de Anhembi, em São Paulo, pertencente ao Departamento de Ciências Florestais da ESALQ/USP. No que diz respeito ao apodrecimento causado pelo fungo Gloeophyllum trabeum, a madeira de eucalipto das sete espécies pode ser considerada resistente, uma vez que os valores de perda de massa foram sempre inferiores a 10%.

Influência da idade na resistência natural da madeira de Eucalyptus grandis W. Hill ex. Maiden ao ataque de cupim de madeira seca (Cryptotermes brevis)

Este trabalho objetivou testar a resistência natural da madeira de Eucalyptus grandis de quatro diferentes idades (10, 14, 20 e 25 anos) ao ataque de cupins de madeira seca. As amostras foram retiradas da prancha diametral, na região próxima ao cerne mais externo, em número de seis unidades por tora, de cada uma das 16 árvores (quatro de cada idade). Cada par de amostras foi colocado em contato com 40 indivíduos, da espécie Cryptotermes brevis (cupim de madeira seca), avaliando-se cada par comparativamente com corpos-de-prova de madeira altamente suscetível ao ataque de cupins, no caso a madeira de Pinus elliottii, sob idênticas condições laboratoriais, mediante observações em intervalos periódicos. Ao término do ensaio foram registrados a porcentagem de cupins mortos e o número de furos, além do desgaste produzido por esses insetos. Verificou-se que a madeira de 10 anos foi a mais severamente atacada, com desgaste semelhante ao da testemunha. As madeiras de 14, 20 e 25 anos não diferiram estatisticamente entre si, quanto à resistência natural ao ataque de cupim de madeira seca, todas classificadas como de desgaste acentuado. A madeira de todas as idades mostrou-se altamente suscetível ao ataque de cupins, revelando a baixa resistência natural da espécie.

Potencialidades dos extrativos do cerne da madeira de teca como preservativo natural e sua influência na cor de madeiras claras

Este estudo teve como objetivo avaliar o potencial preservativo dos extrativos do cerne da madeira de teca (Tectona grandis) e a capacidade dos mesmos na mudança de coloração de madeiras claras. Para tanto, os resíduos gerados no processamento mecânico do cerne da madeira de teca com 20 anos de idade foram coletados e utilizados para realização de extrações. Para avaliar a influência dos extrativos de teca na cor e resistência natural da madeira foi utilizado o alburno da madeira de teca com 10 anos, além da madeira de Pinus sp., em função de ser uma madeira de coloração clara e baixa resistência natural. Foram realizadas extrações em água quente e etanol absoluto. Para determinação da concentração das soluções de tratamento foi realizado um ensaio de toxidez ao fungo Postia placenta. Após definida a concentração, as soluções extraídas foram preparadas para a impregnação. Além disto, foi utilizada uma terceira solução, composta pela combinação das soluções extraídas em água quente e etanol absoluto. Para cada solução testada foi realizado o tratamento pelo método de célula-cheia (Bethell). Para testar a eficiência das soluções preparadas com extrativos de teca, foram realizados leituras colorimétricas e ensaios biológicos com fungos e térmitas xilófagos. A combinação dos extrativos testados promoveu um escurecimento e reduziu a desuniformidade da cor, fazendo com que as madeiras tratadas se aproximassem mais da cor da madeira de cerne do que das amostras sem tratamento das respectivas espécies. A solução de extrativos obtida em etanol absoluto e a combinação dos extrativos obtidos em água quente e etanol absoluto promoveram os melhores resultados na resistência da madeira tratada contra fungos e térmitas xilófagos, alterando significativamente a classe de resistência das respectivas espécies tratadas.

Análise numérica de freqüência natural de materiais compósitos híbridos com memória de forma

Dissertação (mestrado)—Universidade de Brasília, Faculdade de Tecnologia, Departamento de Engenharia Mecânica, 2007.

Integrating environmental and economic life cycle analysis in product development: a material selection case study

Purpose Achieving sustainability by rethinking products, services and strategies is an enormous challenge currently laid upon the economic sector, in which materials selection plays a critical role. In this context, the present work describes an environmental and economic life cycle analysis of a structural product, comparing two possible material alternatives. The product chosen is a storage tank, presently manufactured in stainless steel (SST) or in a glass fibre reinforced polymer composite (CST). The overall goal of the study is to identify environmental and economic strong and weak points related to the life cycle of the two material alternatives. The consequential win-win or trade-off situations will be identified via a Life Cycle Assessment/Life Cycle Costing (LCA/LCC) integrated model. Methods The LCA/LCC integrated model used consists in applying the LCA methodology to the product system, incorporating, in parallel, its results into the LCC study, namely those of the Life Cycle Inventory (LCI) and the Life Cycle Impact Assessment (LCIA). Results In both the SST and CST systems the most significant life cycle phase is the raw materials production, in which the most significant environmental burdens correspond to the Fossil fuels and Respiratory inorganics categories. The LCA/LCC integrated analysis shows that the CST has globally a preferable environmental and economic profile, as its impacts are lower than those of the SST in all life cycle stages. Both the internal and external costs are lower, the former resulting mainly from the composite material being significantly less expensive than stainless steel. This therefore represents a full win-win situation. As a consequence, the study clearly indicates that using a thermoset composite material to manufacture storage tanks is environmentally and economically desirable. However, it was also evident that the environmental performance of the CST could be improved by altering its End-of-Life stage. Conclusions The results of the present work provide enlightening insights into the synergies between the environmental and the economic performance of a structural product made with alternative materials. Further, they provide conclusive evidence to support the integration of environmental and economic life cycle analysis in the product development processes of a manufacturing company, or in some cases even in its procurement practices.

A practical framework for the generation and selection of strategic plans of action, The relevance of timeframe considerations and a systems thinking approach

The paper proposes a methodology especially focused on the generation of strategic plans of action, emphasizing the relevance of having a structured timeframe classification for the actions. The methodology explicitly recognizes the relevance of long-term goals as strategic drivers, which must insure that the complex system is capable to effectively respond to changes in the environment. In addition, the methodology employs engineering systems techniques in order to understand the inner working of the system and to build up alternative plans of action. Due to these different aspects, the proposed approach features higher flexibility compared to traditional methods. The validity and effectiveness of the methodology has been demonstrated by analyzing an airline company composed by 5 subsystems with the aim of defining a plan of action for the next 5 years, which can either: improve efficiency, redefine mission or increase revenues.

Criteria for ERP selection using an AHP approach

Information systems are a foundation key element of modern organizations. Quite often, chief executive officers and managers have to decide about the acquisition of new software solution based in an appropriated set of criteria. Analytic Hierarchy Process (AHP) is one technique used to support that kind of decisions. This paper proposes the application of AHP method to the selection of ERP (Enterprise Resource Planning) systems, identifying the set of criteria to be used. A set of criteria was retrieved from the scientific literature and validated through a survey-based approach.

Simultaneous selection in progenies of yellow passion fruit using selection indices

This study aimed to evaluate the efficiency of simultaneous selection (selection indices) using estimated genetic gains in yellow passion fruit and to make a comparison between the methodologies of Mulamba & Mock and Elston. The study was conducted with 26 sib progenies of yellow passion fruit for intrinsic production characteristics including fruit number, fruit mass, fruit length and diameter, and for the fruit characteristics skin thickness, soluble solids and acidity. Two methodologies were applied: first, in the joint analysis of fruit characteristics and of intrinsic production characteristics in a single phase of selection; and second, in the analysis in two phases, in which priority was given to the intrinsic production characteristics in the first phase, and later, in the second phase, the best fruit characteristics were chosen among the progenies of the first phase. The analysis of variance was applied to the data to detect genetic variability among progenies. The Elston's selection indice was unable to provide distribution of genetic gains consistent with the purposes of the study, as it selected a single progeny of passion fruit. However, the index based on the sum of ranks of Mulamba & Mock was more suitable, as it provided a balanced distribution of gains, selecting a larger number of progenies. The methodology of selection using indices is advantageous in passion fruit, since it contributes to higher genetic gains for all the traits evaluated, and the selection in a single phase was proved efficient for progeny selection.