Micron-scale fast electron filaments and recirculation determined from rear-side optical emission in high-intensity laser-solid interactions

The transport of relativistic electrons generated in the interaction of petawatt class lasers with solid targets has been studied through measurements of the second harmonic optical emission from their rear surface. The high degree of polarization of the emission indicates that it is predominantly optical transition radiation (TR). A halo that surrounds the main region of emission is also polarized and is attributed to the effect of electron recirculation. The variation of the polarization state and intensity of radiation with the angle of observation indicates that the emission of TR is highly directional and provides evidence for the presence of mu m-size filaments. A brief discussion on the possible causes of such a fine electron beam structure is given.

High brightness keV harmonics from relativistically oscillating plasma surfaces

X-ray harmonic radiation extending to 3.3 angstrom, 3.8 keV from Petawatt class laser-solid interactions is presented. The harmonic spectra display a relativistic limit scaling up to similar to 3000th order, above which an intensity dependent scaling roll-over is observed. Highly directional beamed emission for harmonic photon energy h nu > 1 keV is found to be into a cone angle

Characterization of a gamma-ray source based on a laser-plasma accelerator with applications to radiography

The application of high intensity laser-produced gamma rays is discussed with regard to picosecond resolution deep-penetration radiography. The spectrum and angular distribution of these gamma rays is measured using an array of thermoluminescent detectors for both an underdense (gas) target and an overdense (solid) target. It is found that the use of an underdense target in a laser plasma accelerator configuration produces a much more intense and directional source. The peak dose is also increased significantly. Radiography is demonstrated in these experiments and the source size is also estimated. (C) 2002 American Institute of Physics.

Catalysing open innovation through publicly funded R&D: A Comparison of University and Company-based research centres

Public funding of university and company-based R&D centres of excellence is widespread both in core and more peripheral regions. What is less well-known is whether these R&D centres can catalyse multi-directional, multi-actor and iterative innovation. Based on data from a real-time monitoring study, this article explores the development of 18 R&D centres’ external connections. University-based R&D centres establish more new connections than company-based centres and are more likely to be interacting with small or micro-firms. However, there is a general bias towards links with larger firms; micro, small and medium-sized enterprises also are less likely to be involved in collaborative R&D with research centres than other types of relationships. The results suggest the potential for R&D centres to act as a catalyst for open innovation but emphasise the need to ensure that the focus of the R&D being conducted is relevant to the needs of smaller firms.

A robotic apparatus that dictates torque fields around joints without affecting inherent joint dynamics

This manuscript describes how motor behaviour researchers who are not at the same time expert roboticists may implement an experimental apparatus, which has the ability to dictate torque fields around a single joint on one limb or single joints on multiple limbs without otherwise interfering with the inherent dynamics of those joints. Such an apparatus expands the exploratory potential of the researcher wherever experimental distinction of factors may necessitate independent control of torque fields around multiple limbs, or the shaping of torque fields of a given joint independently of its plane of motion, or its directional phase within that plane. The apparatus utilizes torque motors. The challenge with torque motors is that they impose added inertia on limbs and thus attenuate joint dynamics. We eliminated this attenuation by establishing an accurate mathematical model of the robotic device using the Box-Jenkins method, and cancelling out its dynamics by employing the inverse of the model as a compensating controller. A direct measure of the remnant inertial torque as experienced by the hand during a 50 s period of wrist oscillations that increased gradually in frequency from 1.0 to 3.8 Hz confirmed that the removal of the inertial effect of the motor was effectively complete.

The Lake House Extension

The project comprises of the re-ordering and extension of a 19th century country house in the extreme south west of Ireland. The original house is what can be termed an Irish house of the middle size. A common typology in 19th century Ireland the classical house of the middle size is characterised by a highly ordered plan containing a variety of rooms within a square or rectangular form. A strategy of elaborating the threshold between the reception rooms of the house and the garden was adopted by wrapping the house in a notional forest of columns creating deep verandas to the south and west
of the main living spaces. The grid of structural columns derived its proportions directly from the house. The columns became analogous with the mature oak and pine trees in the garden beyond while the floor and ceiling were considered as landscapes in their own right, with the black floor forming hearth stone, kitchen island and basement cellar and the concrete roof inflected to hold roof lights, a chimney and a landscape of pleasure on the roof above.

Aims / Objectives / Questions
1To restore and extend a “house of the middle size”, a historic Irish typology, in a sympathetic manner.
2To address the new build accommodation in a sustainable manner through strategies associated with orientation, micro climates, materiality and engineering both mechanical and structural.
3To explore and develop an understanding for two spatial orders, the enfilade room and non directional space of the grid.
4The creation of deep threshold space.
5Marbling as a finish in fair faced concrete
6Concrete as a sustainable building material

Force-induced activation of covalent bonds in mechanoresponsive polymeric materials

Mechanochemical transduction enables an extraordinary range of physiological processes such as the sense of touch, hearing, balance, muscle contraction, and the growth and remodelling of tissue and
bone1–6. Although biology is replete with materials systems that actively and functionally respond to mechanical stimuli, the default mechanochemical reaction of bulk polymers to large external stress is the unselective scission of covalent bonds, resulting in damage or failure7. An alternative to this degradation process is the rational molecular design of synthetic materials such that mechanical stress
favourably altersmaterial properties. A few mechanosensitive polymers with this property have been developed8–14; but their active response is mediated through non-covalent processes, which may
limit the extent to which properties can be modified and the longterm stability in structural materials. Previously, we have shown with dissolved polymer strands incorporating mechanically sensitive chemical groups—so-called mechanophores—that the directional nature of mechanical forces can selectively break and re-form covalent bonds15,16. We now demonstrate that such forceinduced covalent-bond activation can also be realized with mechanophore-linked elastomeric and glassy polymers, by using a mechanophore that changes colour as it undergoes a reversible electrocyclic ring-opening reaction under tensile stress and thus allows us to directly and locally visualize the mechanochemical reaction. We find that pronounced changes in colour and fluorescence emerge with the accumulation of plastic deformation, indicating that in these polymeric materials the transduction of mechanical force into the ring-opening reaction is an activated process. We anticipate that force activation of covalent bonds can serve as a general strategy for the development of new mechanophore building blocks that impart polymeric materials with desirable functionalities ranging from damage sensing to fully regenerative self-healing.

Genetic renal abnormalities

Inherited disorders of renal structure and function are relatively common causes of end-stage renal disease requiring renal replacement therapy. A family history of haematuria, urinary tract infection or renal failure can alert the clinician to the possible diagnosis of underlying renal genetic abnormalities. In practice, the commonest inherited renal disorder is autosomal dominant polycystic kidney disease (ADPKD), characterized by multiple kidney cysts associated with hypertension and renal failure. Insights into the cell biology of ADPKD are informing new therapeutic approaches to limit cyst growth and prevent progressive renal failure. Non-visible haematuria is a clinical finding that presents a diagnostic challenge because it has so many possible causes. Mutations in the genes encoding collagen proteins within the glomerular basement membrane (GBM) can disrupt its normal barrier function. Thin basement membrane nephropathy, caused by GBM collagen gene mutations, is a relatively common cause of familial haematuria that normally has a good long-term prognosis. Alport syndrome is a rare and genetically heterogeneous condition leading to renal failure in men inheriting the X-linked gene defect. Single-gene defects may cause diverse renal tubular disorders, such as predisposition to renal calculi, diabetes insipidus, renal tubular acidosis or hypertension with associated electrolyte imbalance. Gene mutations responsible for familial renal cancer syndromes, such as tuberous sclerosis complex and von Hippel–Lindau disease, have also been identified

Visuomotor transformation for interception:catching while fixating

Catching a ball involves a dynamic transformation of visual information about ball motion into motor commands for moving the hand to the right place at the right time. We previously formulated a neural model for this transformation to account for the consistent leftward movement biases observed in our catching experiments. According to the model, these biases arise within the representation of target motion as well as within the transformation from a gaze-centered to a body-centered movement command. Here, we examine the validity of the latter aspect of our model in a catching task involving gaze fixation. Gaze fixation should systematically influence biases in catching movements, because in the model movement commands are only generated in the direction perpendicular to the gaze direction. Twelve participants caught balls while gazing at a fixation point positioned either straight ahead or 14 degrees to the right. Four participants were excluded because they could not adequately maintain fixation. We again observed a consistent leftward movement bias, but the catching movements were unaffected by fixation direction. This result refutes our proposal that the leftward bias partly arises within the visuomotor transformation, and suggests instead that the bias predominantly arises within the early representation of target motion, specifically through an imbalance in the represented radial and azimuthal target motion.

Chronic workplace stress and insufficient physical activity: a cohort study

Objectives To examine whether exposure to workplace stressors predicts changes in physical activity and the risk of insufficient physical activity.

Methods Prospective data from the Finnish Public Sector Study. Repeated exposure to low job control, high job demands, low effort, low rewards and compositions of these (job strain and effort-reward imbalance) were assessed at Time 1 (2000-2002) and Time 2 (2004). Insufficient physical activity (<14 metabolic equivalent task hours per week) was measured at Time 1 and Time 3 (2008). The effect of change in workplace stressors on change in physical activity was examined using fixed-effects (within-subject) logistic regression models (N=6665). In addition, logistic regression analysis was applied to examine the associations between repeated exposure to workplace stressors and insufficient physical activity (N=13 976). In these analyses, coworker assessed workplace stressor scores were used in addition to individual level scores.

Results The proportion of participants with insufficient physical activity was 24% at baseline and 26% at follow-up. 19% of the participants who were sufficiently active at baseline became insufficiently active at follow-up. In the fixed-effect analysis, an increase in workplace stress was weakly related to an increase in physical inactivity within an individual. In between-subjects analysis, employees with repeated exposure to low job control and low rewards were more likely to be insufficiently active at follow-up than those with no reports of these stressors; fully adjusted ORs ranged from 1.11 (95% CI 1.00 to 1.24) to 1.21 (95% CI 1.05 to 1.39).

Conclusions Workplace stress is associated with a slightly increased risk of physical inactivity.

A Neutron Diffraction and Molecular Dynamics Investigation of Acetate-based Ionic Liquids as Solvents for Glucose

The liquid state structure of the ionic liquid, 1-ethyl-3-methylimidazolium acetate, and the solute/solvent structure of glucose dissolved in the ionic liquid at a 1: 6 molar ratio have been investigated at 323 K by molecular dynamics simulations and neutron diffraction experiments using H/D isotopically substituted materials. Interactions between hydrogen-bond donating cation sites and polar, directional hydrogen-bond accepting acetate anions are examined. Ion-ion radial distribution functions for the neat ionic liquid, calculated from both MD and derived from the empirical potential structure refinement model to the experimental data, show the alternating shell-structure of anions around the cation, as anticipated. Spatial probability distributions reveal the main anion-to-cation features as in-plane interactions of anions with imidazolium ring hydrogens and cation-cation planar stacking. Interestingly, the presence of the polarised hydrogen-bond acceptor anion leads to increased anion-anion tail-tail structuring within each anion shell, indicating the onset of hydrophobic regions within the anion regions of the liquid.

Design of a wideband conformal array antenna system with beamforming and null steering, for application in a DVB-T based passive radar

The use of radars in detecting low flying, small targets is being explored for several decades now. However radar with counter-stealth abilities namely the passive, multistatic, low frequency radars are in the focus recently. Passive radar that uses Digital Video Broadcast Terrestrial (DVB-T) signals as illuminator of opportunity is a major contender in this area. A DVB-T based passive radar requires the development of an antenna array that performs satisfactorily over the entire DVB-T band. At Fraunhofer FHR, there is currently a need for an array antenna to be designed for operation over the 450-900 MHz range with wideband beamforming and null steering capabilities. This would add to the ability of the passive radar in detecting covert targets and would improve the performance of the system. The array should require no mechanical adjustments to inter-element spacing to correspond to the DVB-T carrier frequency used for any particular measurement. Such an array would have an increased flexibility of operation in different environment or locations.

The design of such an array antenna and the applied techniques for wideband beamforming and null steering are presented in the thesis. The interaction between the inter-element spacing, the grating lobes and the mutual couplings had to be carefully studied and an optimal solution was to be reached at that meets all the specifications of the antenna array for wideband applications. Directional beams, nulls along interference directions, low sidelobe levels, polarization aspects and operation along a wide bandwidth of 450-900 MHz were some of the key considerations.

The Origin of Phragmoplast Asymmetry

The phragmoplast coordinates cytokinesis in plants [1]. It directs vesicles to the midzone, the site where they coalesce to form the new cell plate. Failure in phragmoplast function results in aborted or incomplete cytokinesis leading to embryo lethality, morphological defects, or multinucleate cells [2, 3]. The asymmetry of vesicular traffic is regulated by microtubules [1, 4, 5, 6], and the current model suggests that this asymmetry is established and maintained through treadmilling of parallel microtubules. However, we have analyzed the behavior of microtubules in the phragmoplast using live-cell imaging coupled with mathematical modeling and dynamic simulations and report that microtubules initiate randomly in the phragmoplast and that the majority exhibit dynamic instability with higher turnover rates nearer to the midzone. The directional transport of vesicles is possible because the majority of the microtubules polymerize toward the midzone. Here, we propose the first inclusive model where microtubule dynamics and phragmoplast asymmetry are consistent with the localization and activity of proteins known to regulate microtubule assembly and disassembly.

Nearshore oscillating wave surge converters and the development of Oyster

Oscillating wave surge converters (OWSCs) are a class of wave power technology that exploits the enhanced horizontal fluid particle movement of waves in the nearshore coastal zone with water depths of 10–20 m. OWSCs predominantly oscillate horizontally in surge as opposed to the majority of wave devices, which oscillate vertically in heave and usually are deployed in deeper water. The characteristics of the nearshore wave resource are described along with the hydrodynamics of OWSCs. The variables in the OWSC design space are discussed together with a presentation of some of their effects on capture width, frequency bandwidth response and power take-off characteristics. There are notable differences between the different OWSCs under development worldwide, and these are highlighted. The final section of the paper describes Aquamarine Power’s 315kW Oyster 1 prototype, which was deployed at the European Marine Energy Centre in August 2009. Its place in the OWSC design space is described along with the practical experience gained. This has led to the design of Oyster 2, which was deployed in August 2011. It is concluded that nearshore OWSCs are serious contenders in the mix of wave power technologies. The nearshore wave climate has a narrower directional spread than the offshore, the largest waves are filtered out and the exploitable resource is typically only 10–20% less in 10m depth compared with 50m depth. Regarding the devices, a key conclusion is that OWSCs such as Oyster primarily respond in the working frequency range to the horizontal fluid acceleration; Oyster is not a drag device responding to horizontal fluid velocity. The hydrodynamics of Oyster is dominated by inertia with added inertia being a very significant contributor. It is unlikely that individual flap modules will exceed 1MW in installed capacity owing to wave resource, hydrodynamic and economic constraints. Generating stations will be made up of line arrays of flaps with communal secondary power conversion every 5–10 units.

In vitro mesenchymal stem cell responses on laser-welded NiTi alloy

The biocompatibility of NiTi after laser welding was studied by examining the in vitro (mesenchymal stem cell) MSC responses at different sets of time varying from early (4 to 12 h) to intermediate phases (1 and 4 days) of cell culture. The effects of physical (surface roughness and topography) and chemical (surface Ti/Ni ratio) changes as a consequence of laser welding in different regions (WZ, HAZ, and BM) on the cell morphology and cell coverage were studied. The results in this research indicated that the morphology of MSCs was affected primarily by the topographical factors in the WZ: the well-defined and directional dendritic pattern and the presence of deeper grooves. The morphology of MSCs was not significantly modulated by surface roughness. Despite the possible initial Ni release in the medium during the cell culture, no toxic effect seemed to cause to MSCs as evidenced by the success of adhesion and spreading of the cells onto different regions in the laser weldment. The good biocompatibility of the NiTi laser weldment has been firstly reported in this study.