Network Device Driver Design and Implementation for Symbian Operating System

Tämä diplomityö esittää Symbianin käyttöjärjestelmän verkkoarkkitehtuuriin perustuvan paikallisverkkokortin (LAN) käyttöönottoa. Pääajatus oli keskitetty langattoman LAN— kortin (WLAN) ajureiden käyttöönottoon. Jokainen Symbianin käyttöjärjestelmän verkkoarkkitehtuurin komponentti oli huolellisesti tutkittu, painottaen mahdollista langattoman yhteyden uudelleenkäyttöä. Myös olemassaolevan Ethernetkortin ajureiden uudelleenkäyttö oli huolellisesti otettu huomioon. Diplomityöprojektin aikana esimerkki WLAN-kortin ajurin lähdekoodista oli esitetty. Tämä ajuri on kirjoitettu NOKIA DTN-20 WLAN-korttia varten. Havaittiin myös, että suurin osa Symbianin käyttöjärjestelmän verkkoarkkitehtuurista voidaan käyttää myös WLAN-pohjaisessa yhteydessä ilman muutoksia.. Esitetty ajuri käyttää myös tiettyjä olemassaolevan Ethernetkortin ajureita, esim. Logical Device Driver (LDD):tä.

A Large-Sized Multiwire Proportional Counter for Radiological Survey of Large Areas and Surfaces

Työn tavoitteena oli selvittää, miten eri parametrit vaikuttavat monilankaisen verrannollisuuslaskurin laskennallisiin ominaisuuksiin sekä voidaanko suurikokoista monilankaverrannollisuuslaskuria käyttää tehokkaasti suurien pintojen ? - ja ?- kontaminaation mittaamiseen. Ensin selvitettiin EU:n nykyistä clearing-käytäntöä sekä hahmoteltiin tulevia materiaalivirtoja, esiteltiin verrannollisuuslaskurin ja sen monilankamallin toimintaperiaate sekä käytettävien materiaalien ominaisuudet. Kootun teorian pohjalta selvitettiin tärkeimpien parametrien vaikutus ilmaisimen laskennallisiin ominaisuuksiin. Lopuksi suoritettiin rakenteilla olevan monilankaverrannollisuuslaskurin alustava testaus. Tulevien vuosien aikana eri puolilla maailmaa suljettavat erityyppiset ydinlaitokset luovat suuren tarpeen tehokkaiden kontaminaatiomittauslaitteistojen kehittämiselle. Tällä hetkellä mittaukset suoritetaan lähinnä noin 1 dm2 käsi-instrumentein, joten suurikokoinen, automatisoitu mittauslaitteisto sekä tehostaisi mittausprosessia suuresti sekä säästäisi runsaasti miestyötunteja. Jatkotoimenpiteiksi ehdotetaan laitteiston jatkotestausta, liikkeen ja nopeuden testausta sekä lopulta paikkaherkkyystoiminnon toteuttamisperiaatteen valintaa ja testausta.

Patients' characteristics associated with the decision of "do not attempt cardiopulmonary resuscitation" order in a Swiss hospital.

BACKGROUND: According to Swiss legislation, do not attempt cardiopulmonary resuscitation (DNACPR) order can be made at any time by patients only, unless the resuscitation is considered as futile, based on the doctors' evaluation. Little is known about how this decision is made, and which are the factors influencing this decision. METHODS: Observational, cross-sectional study was conducted between March and May 2013 on 194 patients hospitalized in the general internal medicine ward of a Swiss hospital. The associations between patients' DNACPR orders and gender, age, marital status, nationality, religion, number and type of comorbidities were assessed. RESULTS: 102 patients (53%) had a DNACPR order: 27% issued by the patient him/herself, 12% by his/her relatives and 61% by the medical team. Patients with a DNACPR order were significantly older: 80.7±10.8 vs. 67.5±15.1years in the "with" and "without" DNACPR order group, respectively, p<0.001. Oncologic disease was associated with a DNACPR order issued by the medical team (37.5% vs. 16.9% in the "with" and "without" DNACPR order group, respectively, p<0.05). Being protestant was associated with a DNACPR order issued by the patient (57.9% vs. 25.9% in the "with" and "without" DNACPR order group, respectively p<0.01). CONCLUSIONS: Over half of the patients admitted to a general internal medicine ward had a DNACPR order issued within the first 72h of hospitalization. Older age and oncologic disease were associated with a DNACPR decision by the medical team, while protestant religion was associated with a DNACPR decision by the patient.

A promising new device for the prevention of parastomal hernia.

Parastomal hernia (PSH) is the most frequent long-term stoma complication with serious negative effects on quality of life. Surgical revision is often required and has a substantial morbidity and recurrence rate. The development of PSH requires revisional surgery with a substantial perioperative morbidity and high failure rate in the long-term follow-up. Prophylactic parastomal mesh insertion during stoma creation has the potential to reduce the rate of PSH, but carries the risk of early and late mesh-related complications such as infection, fibrosis, mesh shrinkage, and/or bowel erosion. We developed a new stomaplasty ring (KORING), which is easy to implant, avoids potential mesh-related complications, and has a high potential of long-term prevention of PSH. Here we describe the technique and the first use.

Adaptive Protocol Stacks for Mobile Devices

Tulevaisuudessa siirrettävät laitteet, kuten matkapuhelimet ja kämmenmikrot, pystyvät muodostamaan verkkoyhteyden käyttäen erilaisia yhteysmenetelmiä eri tilanteissa. Yhteysmenetelmillä on toisistaan poikkeavat viestintäominaisuudet mm. latenssin, kaistanleveyden, virhemäärän yms. suhteen. Langattomille yhteysmenetelmille on myös ominaista tietoliikenneyhteyden ominaisuuksien voimakas muuttuminen ympäristön suhteen. Parhaan suorituskyvyn ja käytettävyyden saavuttamiseksi, on siirrettävän laitteen pystyttävä mukautumaan käytettyyn viestintämenetelmään ja viestintäympäristössä tapahtuviin muutoksiin. Olennainen osa tietoliikenteessä ovat protokollapinot, jotka mahdollistavat tietoliikenneyhteyden järjestelmien välillä tarjoten verkkopalveluita päätelaitteen käyttäjäsovelluksille. Jotta protokollapinot pystyisivät mukautumaan tietyn viestintäympäristön ominaisuuksiin, on protokollapinon käyttäytymistä pystyttävä muuttamaan ajonaikaisesti. Perinteisesti protokollapinot ovat kuitenkin rakennettu muuttumattomiksi niin, että mukautuminen tässä laajuudessa on erittäin vaikeaa toteuttaa, ellei jopa mahdotonta. Tämä diplomityö käsittelee mukautuvien protokollapinojen rakentamista käyttäen komponenttipohjaista ohjelmistokehystä joka mahdollistaa protokollapinojen ajonaikaisen muuttamisen. Toteuttamalla esimerkkijärjestelmän, ja mittaamalla sen suorituskykyä vaihtelevassa tietoliikenneympäristössä, osoitamme, että mukautuvat protokollapinot ovat mahdollisia rakentaa ja ne tarjoavat merkittäviä etuja erityisesti tulevaisuuden siirrettävissä laitteissa.

Do mediterranean genera not included in Tachet et al. (2002) have mediterranean trait characteristics?

Do mediterranean genera not included in Tachet et al. 2002 have mediterranean trait characteristics? Multiple-trait databases are increasingly used in community ecology in different regions of the world. In Europe, Tachet et al.(2002) compiled an aquatic macroinvertebrate database for 473 taxa using information on 11 biological traits described by 63 categories. However, less studied regions, at the time of the compilation of the database, such as the mediterranean Basin, can harbour exclusive genera, which were not included in Tachet"s database. In a large-scale study across the mediterranean Basin, we found 44 genera that were not included in Tachet"s database (NEW genera). Our main aim was to compile trait information for these NEW genera and assess whether these genera had specific traits that could explain their exclusivity to the Mediterranean region. We compared the trait characteristics of NEW genera to those of genera only found in Mediterranean or temperate regions that were included in the Tachet"s database (MED and TEM genera, respectively). We found that NEW genera had more mediterranean characteristics than TEM genera and that some trait categories of NEW genera were even more mediterranean-like than the traits of MED genera (e.g., diapause). Therefore, our results suggest that the specific biological traits of these NEW genera allow them to cope successfully and exclusively with the harsh environmental conditions of the mediterranean climate rivers, which could partially explain their absence in Tachet"s database. Other explanations, such as the limited dispersal ability of these NEW genera to reach and colonize temperate Europe or the rarity of these NEW genera, should also be considered. We provide biological traits of the NEW genera to be used in future studies on the mediterranean river ecology.

Characteristics of 2D convective structures in Catalonia (NE Spain): an analysis using radar data and GIS

Flood simulation studies use spatial-temporal rainfall data input into distributed hydrological models. A correct description of rainfall in space and in time contributes to improvements on hydrological modelling and design. This work is focused on the analysis of 2-D convective structures (rain cells), whose contribution is especially significant in most flood events. The objective of this paper is to provide statistical descriptors and distribution functions for convective structure characteristics of precipitation systems producing floods in Catalonia (NE Spain). To achieve this purpose heavy rainfall events recorded between 1996 and 2000 have been analysed. By means of weather radar, and applying 2-D radar algorithms a distinction between convective and stratiform precipitation is made. These data are introduced and analyzed with a GIS. In a first step different groups of connected pixels with convective precipitation are identified. Only convective structures with an area greater than 32 km2 are selected. Then, geometric characteristics (area, perimeter, orientation and dimensions of the ellipse), and rainfall statistics (maximum, mean, minimum, range, standard deviation, and sum) of these structures are obtained and stored in a database. Finally, descriptive statistics for selected characteristics are calculated and statistical distributions are fitted to the observed frequency distributions. Statistical analyses reveal that the Generalized Pareto distribution for the area and the Generalized Extreme Value distribution for the perimeter, dimensions, orientation and mean areal precipitation are the statistical distributions that best fit the observed ones of these parameters. The statistical descriptors and the probability distribution functions obtained are of direct use as an input in spatial rainfall generators.

Hot wire configuration for depositing device grade nano-crystalline silicon at high deposition rate

The University of Barcelona is developing a pilot-scale hot wire chemical vapor deposition (HW-CVD) set up for the deposition of nano-crystalline silicon (nc-Si:H) on 10 cm × 10 cm glass substrate at high deposition rate. The system manages 12 thin wires of 0.15-0.2 mm diameter in a very dense configuration. This permits depositing very uniform films, with inhomogeneities lower than 2.5%, at high deposition rate (1.5-3 nm/s), and maintaining the substrate temperature relatively low (250 °C). The wire configuration design, based on radicals' diffusion simulation, is exposed and the predicted homogeneity is validated with optical transmission scanning measurements of the deposited samples. Different deposition series were carried out by varying the substrate temperature, the silane to hydrogen dilution and the deposition pressure. By means of Fourier transform infrared spectroscopy (FTIR), the evolution in time of the nc-Si:H vibrational modes was monitored. Particular importance has been given to the study of the material stability against post-deposition oxidation.

The contribution of individual and professional characteristics to general and work-related well-being

Cette thèse porte sur la contribution des caractéristiques individuelles et des situations professionnelles au bien-être. En combinant différentes perspectives théoriques, notamment la théorie de la construction de la carrière, la théorie de la justice organisationnelle, les modèles du bien-être au travail, et les conceptualisations de l'incivilité au travail, un certain nombre d'hypothèses sont proposées concernant le lien entre certaines caractéristiques individuelles et situationnelles et le bien-être général et professionnel. Les deux premières études se focalisent sur la validation d'une échelle d'adaptabilités de carrière et sur le rôle médiateur de cette adaptabilité dans la relation entre des dispositions et le bien-être. La troisième étude évolue l'hypothèse d'un possible effet de médiation de l'adaptabilité mais cette fois de la relation entre insécurité professionnelle et charge de travail d'une part et le bien-être d'autre part. La quatrième étude adopte une perspective longitudinale et analyse les associations entre les dimensions de la personnalité, l'adaptabilité de carrière et le bien-être dans quatre parcours professionnels différents. La cinquième étude porte sur une autre caractéristique individuelle, à savoir la croyance en un monde juste. Cette étude illustre comment la croyance en un monde juste influence les perceptions de justice organisationnelle une année après, qui ont une incidence importante sur le bien-être. Enfin, la dernière étude se concentre sur une population spécifique, les immigrants en Suisse, et souligne qu'être la cible d'incivilité sur le lieu de travail est généralement liée au pays d'origine. Globalement, cette thèse met en évidence que les caractéristiques individuelles ont des effets tant directs qu'indirects sur le bien-être et que ces mêmes caractéristiques explique en partie, les relations entre la situation professionnelle et le bien-être. Plus spécifiquement, des situations professionnelles peuvent influencer l'expression de certaines caractéristiques individuelles, soit en contribuant à leurs activations ou à leurs inhibitions. De plus, l'impact des caractéristiques individuelles sur le bien-être semble dépendre de la situation professionnelle. Il est donc important de considérer les influences simultanées et réciproques des caractéristiques individuelles et de la situation contextuelle et professionnelle pour rendre compte du bien-être général et professionnel. -- This thesis explores how individual characteristics and professional situations correspond to well-being. Drawing from various theoretical backgrounds, such as career construction theory, justice theory, models of job strain, and theories on subtle discrimination, a number of specific hypotheses are put forward pertaining to a selection of individual and professional aspects as well as general and work-related well-being. The six studies presented in this thesis focus on specific aspects and adopt different methodological and theoretical approaches. The first two studies concern the validation of the career adapt-abilities scale and test the potential of career adapt-abilities to mediate the relationship between dispositions and outcomes. The third study extends the hypothesis of career adapt-abilities as a mediator and finds that it mediates the effects of job insecurity and job strain on general and professional well-being. The fourth study adopts a longitudinal approach and tests the associations between personality traits and career adaptability and well-being in four different professional situations. Study five concerns another individual characteristic, belief in a just world, and illustrates how justice beliefs drive perceptions of organizational justice, which in turn impact, on well-being outcomes one year later. The final study focuses on the professional experiences of a specific population, immigrants in Switzerland, and confirms that being a target of incivilities is related to national origin. Globally, this thesis finds that individual characteristics have direct and indirect influences on well-being and that these characteristics may also mediate the associations between professional situations and outcomes. In particular, the professional situation may alter the display of individual characteristics, either by contributing to their activation or their depletion, and the ways in which individual factors influence well-being does seem to depend on the professional situation. It is thus necessary to adopt a "both...and" perspective when studying the impact of individual and professional characteristics as these factors mutually influence each other.

Repeatability, correlation and path analysis of physical and chemical characteristics of peach fruits

This study aimed to determine the number of measurements necessary to evaluate physical and chemical characteristics of peach fruits, study the relationships between them and their direct and indirect effects on the content of ascorbic acid and total carotenoids. The characteristics skin and pulp color, fruit weight, suture, equatorial and polar diameters, firmness, soluble solids (SS), titratable acidity (TA), SS/TA ratio, ascorbic acid and total carotenoids were evaluated in 39 cultivars of peach and 3 cultivars of nectarine from the orchard of the Universidade Federal de Viçosa. The repeatability coefficient was estimated by ANOVA and CPCOR. Phenotypic correlation coefficients (rf) were estimated and, after the multicollinearity diagnostics, they were unfolded to direct and indirect effects of the explanatory variables on the response variable using path analysis. There was agreement on the magnitude of repeatability coefficients obtained by the two methods; however, they varied among the 14 characteristics. The highest correlations were found between FW, SD, ED and PD. Seven fruits are sufficient to evaluate the physical and chemical characteristics of peach with a correlation coefficient of 90%. The characteristics considered in the path diagrams (b* skin, hº skin, b* pulp, hº pulp, ED, PD, FIR, SS, SS/AT and TC) are not the main determinants of the ascorbic acid. The yellow hue of the pulp (hº pulp) has the potential to be used in indirect selection for total carotenoids.

Pathomorphological and CT-angiographical characteristics of coronary atherosclerotic plaques in cases of sudden cardiac death.

The goal of this study was to assess the localization and types of thrombosed plaques in cases of sudden cardiac death attributed to coronary artery disease and to evaluate possible correlations with body mass index (BMI) and increased heart weight. This retrospective study was performed on forensic cases for which the cause of death was attributed to coronary artery disease. A complete autopsy and a multi-phase postmortem computed tomography (CT) angiography (MPMCTA) were performed in all cases. Eighty-five cases were selected (mean age, 55.18 ± 11.04 years; 72 men and 13 women). MPMCTA performed prior to autopsy enabled an evaluation of coronary artery perfusion before dissection of the body and helped therefore to guide sampling for histology. An acute coronary thrombosis was found in 57 cases, which included plaque erosion in 26 cases (mean age, 46.73 ± 8.33 years) and rupture or intra-plaque hemorrhage in 31 cases (mean age, 58.23 ± 10.62 years). Erosions were most frequently found in the left anterior descending artery (61.5 %), while only 35.48 % of ruptures were observed in this artery. Chronic coronary pathology was considered as the main cause of death in 28 cases (mean age, 59.64 ± 9.47 years). Sixty-two of the cases (72.94 %) had a BMI in the overweight category (BMI ≥25), with the highest mean BMI in patients with chronic coronary pathology without acute thrombosis found at autopsy. The heart weight was above the predicted reference values in 52 cases (61.18 %). Our results are in accordance with previously published studies on the spatial distribution of vulnerable plaques. We observed a higher percentage of eroded plaques than previously reported. Patients with coronary erosions were significantly younger than those with plaque rupture or those without an acute coronary thrombosis (p values <0.0001). BMI and heart weight were significantly higher for cases without thrombosis in comparison with those with plaque rupture (p values 0.028 and 0.003, respectively). Our results indicating that increased BMI and overweight hearts are associated with chronic ischemic heart disease are compatible with clinical studies. Performing more postmortem studies on forensic autopsies, including modern radiological examinations with MPMCTA, can enhance the detection of vulnerable plaques in living patients and prevent sudden cardiac death.

Type 1 diabetes mellitus in people with pharmacoresistant epilepsy: Prevalence and clinical characteristics.

BACKGROUND: There have been inconsistent reports on the potential association between diabetes mellitus and epilepsy. METHODS: We examined a consecutive cohort of 2016 people with pharmacoresistant epilepsy admitted to a tertiary medical centre. RESULTS: We identified 20 individuals with type 1 diabetes mellitus (T1DM); a point prevalence of 9.9 (95% CI: 6.4, 15.3) cases per 1000 individuals. This represents a more than two-fold increase relative to published prevalence estimates of T1DM in the general population. The onset of T1DM preceded that of epilepsy in 80% of individuals, by a median of 1.5 years. Individuals with T1DM were significantly more likely to have cryptogenic/unknown epilepsy relative to those with type 2 diabetes mellitus or without diabetes (85% versus 35% and 49%, p=0.045). All individuals with T1DM had focal epilepsy, the majority of which were temporal lobe in origin, although there was no evidence that this proportion was any different from those without T1DM (p>0.999). CONCLUSIONS: The prevalence of T1DM appears to be increased in people with pharmacoresistant epilepsy and is associated with cryptogenic/unknown epilepsy. These findings may have pathophysiological implications, especially in the context of anti-glutamic acid decarboxylase antibodies.

The high-speed induction motor: calculating the effects of solid-rotor material on machine characteristics

A method for the analysis of high-speed solid-rotor induction motors in presented. The analysis is based on a new combination of the three dimensional linear method and the transfer matrix method. Both saturation and finite length effects are taken into account. The active region of the solid rotor is divided into saturated and unsaturated parts. The time dependence is assumed to be sinusoidal and phasor quantities are used in the solution. The method is applied to the calculation of smooth solid rotors manufactured of different materials. Six rotor materials are tested: three construction steels, pure iron, a cobaltiron alloy and an aluminium alloy. The results obtained by the method agree fairly well with the measurement quantities.