985 resultados para Detroit-Windsor Tunnel (Detroit, Mich. and Windsor, Canada)
Resumo:
New immigrants to Canada are generally in similar or better physical and mental health than people born in Canada, however, many studies suggest that their health tends to decline quickly after immigration. Lower physical activity levels among new immigrants might be contributing to this phenomenon. There is a paucity of information regarding the physical activity behaviour of the Canadian immigrant population in general and of West Asian women, such as Iranians (Persians), in particular. Given that this group is characterised by an increasing population growth and lower rates of physical activity, it is critical to understand how best to address physical activity promotion in this population. Purpose: To understand the physical activity experiences of Persian women recently immigrated to Toronto, Canada in order to develop recommendations for the design and implementation of tailored physical activity programs. Methods: A qualitative interpretive description approach was chosen to collect and describe ideas, experiences, and perceptions of physical activity within 10 new immigrant women. Using an inductive approach, two fundamental techniques of immersion and crystallization were used throughout the analysis. Thematic analysis was conducted by performing a sequential process of open and axial coding. Emerged themes were further conceptualized through a socio-ecological lens. Results: The facilitators and barriers to physical activity among the women were situated within five overarching categories, 1) Perceptions about physical activity, 2) New physical environment and social structure, 3) Cultural heritage values, 4) Settlement and immigration factors, and 5) Physical activity program features. Discussion: Findings revealed that Persian new immigrant women’s engagement in physical activity after immigration is influenced by factors across the individual, sociocultural, environmental, institutional, and policy levels. Newcomer women’s physical activity was influenced by their transition from their society of origin to the host society and the challenges and successes experienced throughout the settlement and acculturation process. The most noticeable barrier to physical activity in Canada for the women emerged as the lack of communication of physical activity information to newcomers. A set of recommendations is provided for developing efficient physical activity programs for Persian immigrant women, which may also be relevant for other immigrant groups in Canada.
Resumo:
To reach for a target, we must formulate a movement plan - a difference vector of the target position with respect to the starting hand position. While it is known that the medial part of the intraparietal sulcus (mIPS) and the dorsal premotor (PMd) activity reflects aspects of a kinematic plan for a reaching movement, it is unclear whether or how the two regions may differ. We investigated the functional roles of the mIPS and PMd in the planning of reaching movements using high definition transcranial direct current stimulation (HD-tDCS) and examined changes in horizontal endpoint error when participants were subjected to anodal and cathodal stimulation. The left mIPS and PMd were functionally localized with fMRI in each participant using an interleaved center-out pointing and saccade task and mapped onto the scalp using Brainsight. We adopted a randomized, single-blind design and applied anodal and cathodal stimulation (2mA for 20 min; 3cm radius 4x1 electrode placement) during 4 separate visits scheduled at least a week apart. Each participant performed 250 baseline, stimulation, and post-stimulation memory-guided reaches starting from one of two initial hand positions (IHPs) to one of 4 briefly flashed targets (20 cm distant, 5 cm apart horizontally) while fixating on a straight-ahead cross located at the target line. Separate 2-way repeated measures ANOVAs of horizontal endpoint error difference after cathodal tDCS at each stimulation site revealed a significant IHP by target position interaction effect at the left mIPS, and significant IHP and target main effects at the left PMd. Behaviorally, these effects corresponded to IHP-dependent contractions after cathodal mIPS tDCS and IHP-independent contractions after cathodal PMd tDCS. These results suggest that the movement vector is not yet formed at the input level of mIPS, but is encoded at the input of PMd. These results also indicate that tDCS is a viable, useful method in investigating movement planning properties through temporary perturbations of the system.
Resumo:
This dissertation examines the various ways in which Canadian historical researchers confronted the “Canada question,” namely the challenge of defining the basis of a unified national community. In doing so, it follows the scholarship and activities of a network of historians and intellectuals centred on the Canadian Historical Review, a quarterly publication founded in 1920. This study examines their scholarship with the aim of identifying not only the various solutions they posed to the problem, but also the philosophical undercurrents that informed their reasoning in the process. It also traces the rise of a rival network in the Revue d’histoire de l’Amérique française, a French-language historical publication founded in 1947 that by its very existence posed a significant challenge to the definition of the nation at the core of the Canadian Historical Review. This dissertation argues that the network bound together by the Review was engaged in a hegemonic project, one that sought to present a particular definition of Canada through a historical narrative that rested upon a liberal logic. Yet the greatest sustained challenge they faced in this endeavour emerged from Francophone historical scholars, who, although proposing vastly different Canadas to those imagined at the Canadian Historical Review, came under the sway of a number of liberal currents of thought as well. A detailed summary of the key traits of these liberal Canadas is found in the conclusion.
Resumo:
Preeclampsia (PE) is a pregnancy complication that is new-onset of hypertension and proteinuria after 20 weeks of gestation. However, subclinical renal dysfunction may be apparent earlier in gestation prior to the clinical presentation of PE. Although the maternal syndrome of PE resolves early postpartum, women with a history of PE are at higher risk of renal dysfunction later in life. Mineral metabolism, such as phosphate balance is heavily dependent on renal function, yet, phosphate handling in women with a history of PE is largely unknown. To investigate whether women with a history of PE would exhibit changes in phosphate metabolism compared to healthy parous women, phosphate loading test was used. Women with or without a history of PE, who were 6 months to 5 years postpartum, were recruited for this study. Blood and urine samples were collected before and after the oral dosing of 500mg phosphate solution. Biochemical markers of phosphate metabolism and renal function were evaluated. In order to assess the difference in renal function alteration between first trimester women who were or were not destined to develop PE, plasma cystatin C concentration was analysed. After phosphate loading, women with a history of PE had significantly elevated serum phosphate at both 1- and 2-hour, while controls had higher urine phosphate:urine creatinine excretion ratio at 1-hour than women with a history of PE. Women with a history of PE had no changes in intact parathyroid hormone (iPTH) concentration throughout the study period, whereas controls had elevated iPTH at 1-hour from baseline. In terms of renal function in the first trimester, there was no difference in plasma cystatin C concentration between women who were or were not destined to develop PE. The elevation of serum phosphate in women with a history of PE could be due to the delay in phosphate excretion. Prolong elevation of serum phosphate can have serious consequences later in life. Thus, oral phosphate challenge may serve as a useful method of early screening for altered phosphate metabolism and renal function.
Resumo:
The strained relationship between pedagogy and self-cultivation is often overlooked in favour of more pressing and profitable concerns within educational institutions. However, the end of education is not a well-paying job. It is often thought that education will produce a certain type of learned individual. Students are entered into educational institutions from a very young age and spend most of their youth within them, subsequently forming a part of themselves, their self-identify and agency, through these institutions. A significant amount of trust is placed in the hands of educators not only to impart information about various subject matters but to teach students how to think. This, however, is a difficult task which cannot be completely accomplished; thinking is a skill which an educator can promote but only the individual can cultivate. If self-cultivation is not the end of pedagogical practice and education, there is something deeply contradictory between the theoretical and practical values and aims of educational institutions.This thesis will address the problems caused by the neglect of self-cultivation within the pedagogical practices of contemporary educational institutions. I argue that self-cultivation, existential learning and flourishing should be the focus of these institutions. Educational institutions can make alternative efforts not only to improve the learning environment for these students but to prepare them to cope with existential questions. By acknowledging and focusing on the significance of self-cultivation, educational institutions can and should make efforts not only to teach useful, marketable skills and information but to also nurture the agency and mental well-being of the student him- or herself. My hope is that this thesis will be the first step towards answering a larger concern: How can educational institutions alleviate the struggles of students, particularly the seemingly growing number who are suffering from depression, by appealing to notions of self-cultivation?
Resumo:
Indigenous ways of knowing are dependent on an inheriting process both amongst humans and between human and non-human being. These multi-relationships cross material and immaterial borders as sites of knowledge production. This manuscript will interrogate how three particular Indigenous cosmological relationships have been purposefully re-meaninged by colonial institutions: 1) How Anishinaabe and Haudenosaunee origin stories have been abstracted into a distinctive epistemological versus ontological site; 2) How Anishnaabe spirit worlds are impacted by colonial relations, and how state institutions benefit from the re-meaning of these worlds; and 3) How Indigenous sovereignty in Canada is imagined from a statist perspective, and how these polices have re-meaninged the sacred relationships within a cosmological understanding of Haudenosaunee governance. The re-meaning of sacredly-held Indigenous relationships is both accelerated by, and contributes to, a practice of reducing upon Indigenous and non-human societies. Throughout expressions of colonialism on Indigenous territories (the academy, the state, Indian policy), Indigenous knowledge is consistently either dismissed or appropriated. This reduction of Indigenous knowledge continues to bolster functions of the state as related to the elimination of the “Indian Problem” via reducing the “Indian” to an adaptive subject.
Resumo:
Abstract This thesis examines one of the most sensitive challenges facing contemporary democracies: the accommodation of Muslim minorities in public institutions and services. It focuses on the field of education, and on two particular issues: the public funding of Islamic schools and the accommodation of Muslim needs in public secular schools. The analysis is based on an examination of outcomes in four jurisdictions that differ significantly in the level of accommodation that has emerged: England, Scotland, Ontario, and Quebec. I seek to explain why such variation in outcomes exists among these four cases. I draw on four bodies of literature to underpin the theoretical framework: historical institutionalism, political mobilization by civil society, political parties, and ideationalism. My argument can be summarized simply; historic church-state settlements, unique in each case, are the most important factor explaining the variation in outcomes in England, Scotland, Ontario, and Quebec. In some cases, the historic church-state template is incrementally adapted to accommodate Muslim minorities. In other cases, relatively little accommodation occurs and the path-dependent trajectory of church-state relations remains entrenched. While the historic church-state template is a necessary factor in the explanation, it does not fully account for the variation. For a more complete picture, I demonstrate that there are several additional key factors that also shape the outcomes: first, national identity and public attitudes towards immigration and immigrants; second, the extent of mobilization by political agents, such as civil society organizations and historic churches; and third, the response of political parties to demands by Muslims for institutional accommodation. Ultimately, I conclude that Muslims in these jurisdictions are receiving some accommodation, but the process is slow and partial. This thesis makes important theoretical and empirical contributions to the discussion of Muslim integration in liberal democratic states. First, a framework has yet to be developed that considers the theoretical implications of institutional accommodation of Muslims; I address this gap. Second, this research demonstrates the utility of historical institutionalism in explaining the adaptation of church-state templates to accommodate Muslims’ demands. Last, this study makes an original contribution by comparing the cases of England, Scotland, Ontario, and Quebec in the accommodation of Muslims in education. A comparison of Canada with the United Kingdom has not yet been done.
Resumo:
I distinguish two ways that philosophers have approached and explained the reality and status of human social institutions. I call these approaches “naturalist” and “post-naturalist”. Common to both approaches is an understanding that the status of mind and its relation to the world or “nature” has implications on a conception of the status of institutional reality. Naturalists hold that mind is explicable within a scientific frame that conceives of mind as a fundamentally material process. By proxy, social reality is also materially explicable. Post-naturalists critique this view, holding instead that naturalism is parasitic on contemporary science—it therefore is non-compulsory and distorts how we ought to understand mind and social reality. A comparison of naturalism and post-naturalism will comprise the content of the first chapter. The second chapter turns to tracing out the dimensions of a post-naturalist narrative of mind and social reality. Post-naturalists conceive of mind and its activity of thought as sui generis, and it transpires from this that social institutions are better understood as a rational mind’s mode of the expression in the world. Post-naturalism conceives of social reality as a necessary dimension of thought. Thought requires a second person and thereby a tradition or context of norms that come to both structure its expression and become the products of expression. This is in contrast to the idea that social reality is a production of minds, and thereby derivative. Social reality, self-conscious thought, and thought of the second person are therefore three dimensions of a greater unity.
Resumo:
This thesis describes the preparation of polymersomes from poly(ethylene glycol)-block-polycarbonate (PEG-PC) copolymers functionalized with pendant coumarin groups. Coumarin groups undergo photo-reversible dimerization when irradiated with specific ultraviolet wavelengths, so they can be used to prepare polymers with photo-responsive properties. In this case, the pendant coumarin groups enable stabilization of the polymersome membrane through photo-crosslinking of the hydrophobic block. Initially, several novel cinnamoyl and coumarin functionalized cyclic carbonate monomers were synthesized using ester, ether, or amide linkages. While the homopolymerization of these functionalized monomers proved challenging due to their high melting points, both cinnamoyl and coumarin functionalized monomers were successfully copolymerized with trimethylene carbonate (TMC) at 100 ℃ using a catalyst-free melt polymerization process where the TMC doubled as a solvent for the higher melting point monomer. Using this system, polycarbonate copolymers with up to 33% incorporation of the functionalized monomers were prepared. In addition, an investigation of some anomalous polymerization results identified previously unreported triethylamine-based catalysts for the melt polymerization of carbonate monomers. These studies also demonstrated that the catalyst-free polymerization of TMC occurs faster and at lower temperatures than previously reported. Subsequently, the photo-crosslinking of cinnamoyl and coumarin functionalized polycarbonates was compared and coumarin was identified as the more effective crosslinking agent when using 300-400 nm UV. An investigation of the photo-reversibility of the coumarin dimerization revealed no discernible change in the properties of crosslinked networks, but rapid photo-reversion in dilute solutions. The photo-crosslinking and photo-reversion kinetics of the coumarin functionalized polycarbonates were determined to be second-order in both cases. Finally, the self-assembly of PEG-PC diblock copolymers functionalized with coumarin was examined and both reverse solvent evaporation and solvent displacement were found to induce self-assembly, with hydrophilic mass fractions (f-factors) of 12-28% resulting in the formation of solid microparticles and nanoparticles and f-factors of 33-43% resulting in the formation of polymersomes. The stabilization of these polymersome membranes through photo-initiator-free photo-crosslinking was demonstrated with the crosslinking allowing polymersomes to withstand centrifugation at 12,000 x g. In addition, the encapsulation of calcein, as a model small molecule drug, in the stabilized polymersomes was successfully demonstrated using confocal microscopy.
Resumo:
Electron beam lithography (EBL) and focused ion beam (FIB) methods were developed in house to fabricate nanocrystalline nickel micro/nanopillars so to compare the effect of fabrication on plastic yielding. EBL was used to fabricate 3 μm and 5 μm thick poly-methyl methacrylate patterned substrates in which nickel pillars were grown by electroplating with height to diameter aspect ratios from 2:1 to 5:1. FIB milling was used to reduce larger grown pillars to sizes similar to EBL grown pillars. X-ray diffraction, electron back-scatter diffraction, scanning electron microscopy, and FIB imaging were used to characterize the nickel pillars. The measured grain size of the pillars was 91±23 nm, with strong <110> and weaker <111> and <110> crystallographic texture in the growth. Load-controlled compression tests were conducted using a MicroMaterials nano-indenter equipped with a 10 μm flat punch at constant rates from 0.0015 to 0.03 mN/s on EBL grown pillars, and 0.0015 and 0.015 mN/s on FIB-milled pillars. The measured Young’s modulus ranged from 55 to 350 GPa for all pillars, agreeing with values in the literature. EBL grown pillars exhibited stochastic strain-bursts at slow loading rates, attributed to local micro yield events, followed by work hardening. Sharp yield points were also observed and attributed to the gold seed layer de-bonding between the nickel pillar and substrate due to the shear stress associated with end effects that arise from the substrate constraint. The onset of yield ranged from 108 to 1800 MPa, which is greater than bulk nickel, but within values given in the literature. FIB-milled pillars demonstrated stochastic yield behaviour at all loading rates tested, yielding between 320 and 625 MPa. Deformation was apparent at FIB-milled pillar tops, where the smallest cross-sectional area was measured, but still exhibited superior yield strength to bulk nickel. The gallium damage at the outer surface of the pillars likely aids in dislocation nucleation and plasticity, leading to lower yield strengths than for the EBL pillars. Thermal drift, substrate effects, and noise due to vibrations within the indenter system contributed to variance and inconsistency in the data.
Resumo:
Larger lineups could protect innocent suspects from being misidentified; however, they can also decrease correct identifications. Bertrand (2006) investigated whether the decrease in correct identifications could be prevented by adding more cues, in the form of additional views of lineup members’ faces, to the lineup. Adding these cues was successful to an extent. The current series of studies attempted to replicate Bertrand’s (2006) findings while addressing some methodological issues—namely, the inconsistency in image size as lineup size increased. First, I investigated whether image size could affect face recognition (Chapter 2) and found it could, but that it also affected previously-seen (“old”) versus previously-unseen (“new”) faces differently. Specifically, smaller image sizes at exposure lowered accuracy for old faces, while these same image sizes at recognition lowered accuracy for new faces. Although these results indicate that target recognition would be unaffected by image size at recognition (i.e., during a lineup), lineups are also comprised of previously-unseen faces, in the form of fillers and innocent suspects. Because image size could affect lineup decisions, as it could become more difficult to realize fillers are previously-unseen, I decided to replicate Bertrand (2006) while keeping image size constant in Chapters 3 (simultaneous lineups) and 4 (simultaneous-presentation, sequential decisions). In both Chapters, the integral findings were the same: correct identification rates decreased as lineup size increased from 6- to 24-person lineups, but adding cues had no effect. The inability to replicate Bertrand (2006) could mean that the original finding was due to chance, but alternate explanations also exist, such as the overall size of the array, the degree to which additional cues overlap, and the length of the target exposure. These alternate explanations, along with directions for future research, are discussed in the following Chapters.
Resumo:
Sensors for real-time monitoring of environmental contaminants are essential for protecting ecosystems and human health. Refractive index sensing is a non-selective technique that can be used to measure almost any analyte. Miniaturized refractive index sensors, such as silicon-on-insulator (SOI) microring resonators are one possible platform, but require coatings selective to the analytes of interest. A homemade prism refractometer is reported and used to characterize the interactions between polymer films and liquid or vapour-phase analytes. A camera was used to capture both Fresnel reflection and total internal reflection within the prism. For thin-films (d = 10 μm - 100 μm), interference fringes were also observed. Fourier analysis of the interferogram allowed for simultaneous extraction of the average refractive index and film thickness with accuracies of ∆n = 1-7 ×10-4 and ∆d < 3-5%. The refractive indices of 29 common organic solvents as well as aqueous solutions of sodium chloride, sucrose, ethylene glycol, glycerol, and dimethylsulfoxide were measured at λ = 1550 nm. These measurements will be useful for future calibrations of near-infrared refractive index sensors. A mathematical model is presented, where the concentration of analyte adsorbed in a film can be calculated from the refractive index and thickness changes during uptake. This model can be used with Fickian diffusion models to measure the diffusion coefficients through the bulk film and at the film-substrate interface. The diffusion of water and other organic solvents into SU-8 epoxy was explored using refractometry and the diffusion coefficient of water into SU-8 is presented. Exposure of soft baked SU-8 films to acetone, acetonitrile and methanol resulted in rapid delamination. The diffusion of volatile organic compound (VOC) vapours into polydimethylsiloxane and polydimethyl-co-polydiphenylsiloxane polymers was also studied using refractometry. Diffusion and partition coefficients are reported for several analytes. As a model system, polydimethyl-co-diphenylsiloxane films were coated onto SOI microring resonators. After the development of data acquisition software, coated devices were exposed to VOCs and the refractive index response was assessed. More studies with other polymers are required to test the viability of this platform for environmental sensing applications.
Resumo:
Background and Objectives: Mobility limitations are a prevalent issue in older adult populations, and an important determinant of disability and mortality. Neighborhood conditions are key determinants of mobility and perception of safety may be one such determinant. Women have more mobility limitations than men, a phenomenon known as the gender mobility gap. The objective of this work was to validate a measure of perception of safety, examine the relationship between neighborhood perception of safety and mobility limitations in seniors, and explore if these effects vary by gender. Methods: This study was cross-sectional, using questionnaire data collected from community-dwelling older adults from four sites in Canada, Colombia, and Brazil. The exposure variable was the neighborhood aggregated Perception of Safety (PoS) scale, derived from the Physical and Social Disorder (PSD) scale by Sampson and Raudenbush. Its construct validity was verified using factor analyses and correlation with similar measures. The Mobility Assessment Tool – short form (MAT-sf), a video-based measure validated cross-culturally in the studied populations, was used to assess mobility limitations. Based on theoretical models, covariates were included in the analysis, both at the neighborhood level (SES, social capital, and built environment) and the individual level (age, gender, education, income, chronic illnesses, depression, cognitive function, BMI, and social participation). Multilevel modeling was used in order to account for neighborhood clustering. Gender specific analyses were carried out. SAS and M-plus were used in this study. Results: PoS was validated across all sites. It loaded in a single factor, after excluding two items, with a Cronbach α value of approximately 0.86. Mobility limitations were present in 22.08% of the sample, 16.32% among men and 27.41% among women. Neighborhood perception of safety was significantly associated with mobility limitations when controlling for all covariates, with an OR of 0.84 (CI 95%: 0.73-0.96), indicating lower odds of having mobility limitations as neighborhood perception of safety improves. Gender did not affect this relationship despite women being more likely to have mobility limitations and live in neighborhoods with poor perception of safety. Conclusion: Neighborhood perception of safety affected the prevalence of mobility limitations in older adults in the studied population.
Resumo:
Spectral unmixing (SU) is a technique to characterize mixed pixels of the hyperspectral images measured by remote sensors. Most of the existing spectral unmixing algorithms are developed using the linear mixing models. Since the number of endmembers/materials present at each mixed pixel is normally scanty compared with the number of total endmembers (the dimension of spectral library), the problem becomes sparse. This thesis introduces sparse hyperspectral unmixing methods for the linear mixing model through two different scenarios. In the first scenario, the library of spectral signatures is assumed to be known and the main problem is to find the minimum number of endmembers under a reasonable small approximation error. Mathematically, the corresponding problem is called the $\ell_0$-norm problem which is NP-hard problem. Our main study for the first part of thesis is to find more accurate and reliable approximations of $\ell_0$-norm term and propose sparse unmixing methods via such approximations. The resulting methods are shown considerable improvements to reconstruct the fractional abundances of endmembers in comparison with state-of-the-art methods such as having lower reconstruction errors. In the second part of the thesis, the first scenario (i.e., dictionary-aided semiblind unmixing scheme) will be generalized as the blind unmixing scenario that the library of spectral signatures is also estimated. We apply the nonnegative matrix factorization (NMF) method for proposing new unmixing methods due to its noticeable supports such as considering the nonnegativity constraints of two decomposed matrices. Furthermore, we introduce new cost functions through some statistical and physical features of spectral signatures of materials (SSoM) and hyperspectral pixels such as the collaborative property of hyperspectral pixels and the mathematical representation of the concentrated energy of SSoM for the first few subbands. Finally, we introduce sparse unmixing methods for the blind scenario and evaluate the efficiency of the proposed methods via simulations over synthetic and real hyperspectral data sets. The results illustrate considerable enhancements to estimate the spectral library of materials and their fractional abundances such as smaller values of spectral angle distance (SAD) and abundance angle distance (AAD) as well.
Resumo:
To study the dissipation of heat generated due to the formation of pinholes that cause local hotspots in the catalyst layer of the Polymer Electrolyte Fuel Cell, a two-phase non-isothermal model has been developed by coupling Darcy’s law with heat transport. The domain under consideration is a section of the membrane electrode assembly with a half-channel and a half-rib. Five potential locations where a pinhole might form were analyzed: at the midplane of the channel, midway between the channel midplane and the channel wall, at the channel or rib wall, midway between the rib midplane and the channel wall, at the midplane of the rib. In the first part of this work, a preliminary thermal model was developed. The model was then refined to account for the two-phase effects. A sensitivity study was done to evaluate the effect of the following properties on the maximum temperature in the domain: Catalyst layer thermal conductivity, the Microporous layer thermal conductivity, the anisotropy factor of the Catalyst layer thermal conductivity, the Porous transport layer porosity, the liquid water distribution and the thickness of the membrane and porous layers. Accounting for the two-phase effects, a slight cooling effect was observed across all hotspot locations. The thermal properties of the catalyst layer were shown to have a limited impact on the maximum temperature in the catalyst layer of new fuel cells without pinhole. However, as hotspots start to appear, thermal properties play a more significant role in mitigating the thermal runaway.