Design guidelines and characteristics of beam-shaping microstructure optical fibers

Microstructure optical fibers with flat-top fundamental mode are first proposed by introducing a low-index inner core into the core of index-guiding microstructure optical fibers. The design guidelines and characteristics of beam-shaping microstructure optical fibers are demonstrated. The interrelationships of inner-core index with laser wavelength, air hole diameter and size of inner core are investigated. The influence of the relative size of inner core on the spatial profile of the fundamental mode is demonstrated. Moreover, sensitivity of the flat-top fundamental mode profile from the slight change of the optimum inner-core index value is studied. Starting from these results we deduce that it is possible to fabricate beam-shaping microstructure fibers with nowadays technique. (C) 2005 Elsevier B.V. All rights reserved.

Field enhancement and power distribution characteristics of subwavelength-diameter terahertz hollow optical fiber

Fields in subwavelength-diameter terahertz hollow optical fiber (STHOF) can be intensified by large discontinuity of the electric field at high index contrast interfaces. The influences of fiber geometry and refractive index of the dielectric region on the fiber characteristics, such as power distribution, enhancement factor, have been discussed in detail. By appropriate design, the intensity in the central region of STHOF may be enhanced by a factor of greater than 1.5 compared with subwavelength-diameter terahertz fiber without the central hole and the loss can be reduced. For its compact structure and simple fabrication process, the fiber may be very useful in many miniaturized high performance and novel terahertz photonic devices. (c) 2007 Elsevier B.V. All rights reserved.

Design guidelines and characteristics for a kind of four-layer large flattened mode fibers

A theoretical method to analyze a kind of four-layer large flattened mode (LFM) fibers is presented. The properties of the fiber, including the fundamental and higher-order modal fields, effective area and bending loss are discussed by comparison. At the same time, the reasons for the different characteristics are considered. The obtained results indicate that the effective area of the four-layer LFM fiber is about 1.3 times larger than that of the conventional standard step-index fiber and the fiber can suppress the higher-order modes via bending effectively. The four-layer LFM fiber has less efficient bend-induced filtering ability than the conventional step-index fiber; however, it has more efficient filtering ability than the three-layer LFM fiber. (C) 2007 Elsevier GmbH. All rights reserved.

Morphological characteristics of amorphous Ge2Sb2Te5 films after a single femtosecond laser pulse irradiation

The morphology of materials resulting from laser irradiation of the single-layer and the multilayer amorphous Ge2Sb2Te5 films using 120 fs pulses at 800 nm was observed using scanning electron microscopy and atomic force microscopy. For the single-layer film, the center of the irradiated spot is depression and the border is protrusion, however, for the multilayer film, the center morphology changes from a depression to a protrusion as the increase of the energy. The crystallization threshold fluence of the single-layer and the multilayer film is 22 and 23 mJ/cm(2), respectively. (c) 2005 Elsevier B.V. All rights reserved.

Controle da Hanseníase: Detecção precoce através do exame de contatos e avaliação do tratamento dos pacientes submetidos a 12 doses de poliquimioterapia (PQT/OMS)

O diagnóstico precoce e o tratamento são imprescindíveis para o controle da hanseníase, pois visam eliminar o mais precocemente possível as fontes de transmissão. O principal critério de cura da doença é o tempo de tratamento, relacionado às doses fixas da poliquimioterapia. O tempo de tratamento dos pacientes multibacilares foi reduzido de 24 para 12 doses em até 18 meses em 1998. Os objetivos desta tese foram: avaliar a detecção de casos de hanseníase entre os contatos dos pacientes e avaliar fatores de risco associados à piora das incapacidades físicas nos pacientes após a alta do tratamento poliquimioterápico com as 12 doses mensais. Dois artigos foram elaborados. O primeiro artigo avaliou características dos pacientes com hanseníase e de seus contatos associadas ao risco de adoecimento entre os contatos. O segundo artigo avaliou fatores de risco relacionados à piora das incapacidades físicas dos pacientes com hanseníase multibacilar, submetidos ao tratamento com 12 doses fixas da poliquimioterapia. Os resultados mostraram que o risco para hanseníase, relacionado aos contatos foi o tipo de convivência com o caso índice. Entre os fatores dos casos índices, a carga bacilar foi o único associado ao adoecimento dos contatos. Além desses fatores, os contatos que apresentam relação de consangüinidade com o caso índice e os contatos dos pacientes com menor nível de escolaridade mostraram maior chance de se apresentarem doentes no momento do diagnóstico do caso índice. A cicatriz BGC e a vacina recebida após o diagnóstico do caso índice contribuíram independentemente como fatores de proteção. A neuropatia piorou em 40% dos pacientes durante o período de 10 anos após a alta do tratamento. Esta piora foi associada à presença de incapacidades físicas e ao número de lesões cutâneas no momento do diagnóstico assim como à presença de neurite durante o acompanhamento.