Synthesis and characterization of lanthanum- and yttrium-doped Fe2O3 pigments

MELO, D. M. A. et al. Synthesis and charactezarion of lanthanum and yttrium doped Fe2O3 pigments. Cerâmica, São Paulo, v. 53, p. 79-82, 2007.

Autoeficácia, características sociodemográficas e capacitação profissional: um estudo com servidores de uma Universidade Federal

Self-efficacy, the construct developed by Albert Bandura in 1977 and widely studied around the world, means the individual's belief in his own capacity to successfully perform a certain activity. This study aims to determine the degree of association between sociodemographic characteristics and professional training to the levels of Self-Efficacy at Work (SEW) of the Administrative Assistants in a federal university. This is a descriptive research submitted to and approved by the Ethics Committee of UFRN. The method of data analysis, in quantitative nature, was accomplished with the aid of the statistical programs R and Minitab. The instrument used in research was a sociodemographic data questionnaire, variables of professional training and the General Perception of Self-efficacy Scale (GPSES), applied to the sample by 289 Assistants in Administration. Statistical techniques for data analysis were descriptive statistics, cluster analysis, reliability test (Cronbach's alpha), and test of significance (Pearson). Results show a sociodemographic profile of Assistants in Administration of UFRN with well-distributed characteristics, with 48.4% men and 51.6% female; 59.9% of them were aged over 40 years, married (49.3%), color or race white (58%) and Catholics (67.8%); families are composed of up to four people (75.8%) with children (59.4%) of all age groups; the occupation of the mothers of these professionals is mostly housewives (51.6%) with high school education up to parents (72%) and mothers (75.8%). Assistants in Administration have high levels of professional training, most of them composed two groups of servers: the former, recently hired public servants (30.7%) and another with long service (59%), the majority enter young in career and it stays until retirement, 72.4% of these professionals have training above the minimum requirement for the job. The analysis of SEW levels shows medium to high levels for 72% of assistants in administration; low SEWclassified people have shown a high average of 2.7, considered close to the overall mean presented in other studies, which is 2.9. The cluster analysis has allowed us to say that the characteristics of the three groups (Low, Medium and High SEW) are similar and can be found in the three levels of SEW representatives with all the characteristics investigated. The results indicate no association between the sociodemographic variables and professional training to the levels of self-efficacy at work of Assistants in Administration of UFRN, except for the variable color or race. However, due to the small number of people who declared themselves in color or black race (4% of the sample), this result can be interpreted as mere coincidence or the black people addressed in this study have provided a sense of efficacy higher than white and brown ones. The study has corroborated other studies and highlighted the subjectivity of the self-efficacy construct. They are needed more researches, especially with public servants for the continuity and expansion of studies on the subject, making it possible to compare and confirm the results

Adição de cascalho de perfuração da bacia potiguar em argilas para uso em materiais cerâmicos: influência da concentração e temperatura de queima.

One of waste produced on large scale during the well drilling is the gravel drilling. There are techniques for the treatment of the same, but there isn t consensus on what are the best in terms of economic and environmental. One alternative for disposal of this waste and objective of this paper is the incorporation and immobilization of gravel clay matrix to assess their technological properties. The Raw Materials used were characterized by the following techniques: Chemical Analysis by X-ray fluorescence (XRF), mineralogical analysis by X-ray Diffraction (XRD), Grain Size Analysis (FA) and Thermal Analysis by Thermogravimetry (TG) and thermodiferential (DTA). After characterizing, samples were formulated in the following percentages: 0, 5, 10, 15, 25, 50, 75, 100% (weight) of gravel drilling, then the pieces were pressed, dried (110 ° C) and sintered at temperatures of 850, 950 and 1050 ° C. After sintering, samples were tested for water absorption, linear shrinkage, flexural strength, porosity, density, XRD and test color. The results concluded that the incorporation of gravel drilling is a viable possibility for solid masonry bricks and ceramic blocks manufacture at concentrations and firing temperature described here. Residue incorporation reduces an environmental problem, the cost of raw materials for manufacture of ceramic products

Obtenção de filtro cerâmico a partir da diatomita e casca de arroz carbonizada visando tratamento de efluente têxtil

The effluents released by the textile industry have high concentrations of alkali, carbohydrates, proteins, in addition to colors containing heavy metals. Therefore, a filter was prepared aiming primarily to the removal of color. In order to prepare this filter, rice hulls and diatomite were used, which have in their structure, basically amorphous hydrated silica. The silica exists in three crystalline forms: quartz, tridymite and cristobalite. In accordance with the above considerations, this study was divided into two stages; the first corresponds to the preparation of the filter and the second to carry out the tests in the effluent/filter in order to verify the efficiency of the color removal. First, the raw material was subjected to a chemical analysis and XRD, and then the diatomite was mixed, via humid, with a planetarium windmill with 20 %, 40 %, 60 % and 80 % of rice husk ash. To the mixture, 5 % carboxymethylcellulose (CMC) was added as a binder at room temperature. The samples were uniaxially compacted into metallic matrix of 0.3 x 0.1 cm² of area at a pressure of 167 MPa by means of hydraulic press and then sintered at temperatures of 1,000 °C, 1,200 °C and 1,400 °C for 1 h and submitted to granulometry test using laser, linear retraction, water absorption, apparent porosity and resistance to bending, DTA, TMA and XRD. To examine the pore structure of the samples scanning electron microscope (SEM) was used. Also tests were carried out in a mercury porosimeter to verify the average size of the pores and real density of the samples. In the second stage, samples of the effluent were collected from a local industry, whose name will be preserved, located in Igapó, in the State of Rio Grande do Norte - RN. The effluent was first pretreated before filtration and then subjected to a treatment of flotation. The effluent was then characterized before and after filtration, with parameters of color, turbidity, suspended solids, pH, chemical and biochemical oxygen demand (COD and BOD). Thus, through the XRD analysis the formation of cristobalite α in all samples was observed. The best average size of pore was found to be 1.75 μm with 61.04 % apparent porosity, thus obtaining an average 97.9 % color removal and 99.8 % removal of suspended solid

Síntese de pigmentos cerâmicos inorgânicos nanométricos e encapsulados com estrutura core-shell pela rota dos precursores poliméricos

The present work has as objective the development of ceramic pigments based in iron oxides and cobalt through the polymeric precursor method, as well as study their characteristics and properties using methods of physical, chemical, morphological and optical characterizations.In this work was used iron nitrate, and cobalt citrate as precursor and nanometer silica as a matrix. The synthesis was based on dissolving the citric acid as complexing agent, addition of metal oxides, such as chromophores ions and polymerization with ethylene glycol. The powder obtained has undergone pre-ignition, breakdown and thermal treatments at different calcination temperatures (700 °C, 800 °C, 900 °C, 1000 °C and 1100 °C). Thermogravimetric analyzes were performed (BT) and Differential Thermal Analysis (DTA), in order to evaluate the term decomposition of samples, beyond characterization by techniques such as BET, which classified as microporous materials samples calcined at 700 ° C, 800 º C and 900 º C and non-porous when annealed at 1000 ° C and 1100 º C, X-ray diffraction (XRD), which identified the formation of two crystalline phases, the Cobalt Ferrite (CoFe2O4) and Cristobalite (SiO2), Scanning Electron Microscopy (SEM) revealed the formation of agglomerates of particles slightly rounded;and Analysis of Colorimetry, temperature of 700 °C, 800 °C and 900 °C showed a brown color and 1000 °C and 1100 °C violet

Síntese de pigmento cerâmico ferrita de cobalto utilizando planejamento experimental

Synthetic inorganic pigments are the most widely used in ceramic applications because they have excellent chemical and thermal stability and also, in general, a lower toxicity to man and to the environment. In the present work, the ceramic black pigment CoFe2O4 was synthesized by the polymerization Complex method (MPC) in order to form a material with good chemical homogeneity. Aiming to optimize the process of getting the pigment through the MPC was used a fractional factorial design 2(5-2), with resolution III. The factors studied in mathematical models were: citric acid concentration, the pyrolysis time, temperature, time and rate of calcination. The response surfaces using the software statistica 7.0. The powders were characterized by thermal analysis (TG/DSC), x-ray diffraction (XRD), scanning electron microscopy (SEM) and spectroscopy in the UV-visible. Based on the results, there was the formation of phase cobalt ferrite (CoFe2O4) with spinel structure. The color of the pigments obtained showed dark shades, from black to gray. The model chosen was appropriate since proved to be adjusted and predictive. Planning also showed that all factors were significant, with a confidence level of 95%

Desenvolvimento de membranas porosas de alumina para fins de tratamento de efluente industrial têxtil

Textile production has been considered as an activity of high environmental impact due to the generation of large volumes of waste water with high load of organic compounds and strongly colored effluents, toxic and difficult biodegradability. This thesis deals with obtaining porous alumina ceramic membranes for filtration of textile effluent in the removal of contaminants, mainly color and turbidity. Two types of alumina with different particle sizes as a basis for the preparation of formulation for mass production of ceramic samples and membranes. The technological properties of the samples were evaluated after using sintering conditions: 1,350ºC-2H, 1,450ºC-30M, 1,450ºC-2H, 1,475ºC-30M and 1,475ºC-2H. The sintered samples were characterized by XRD, XRF, AG, TG, DSC, DL, AA, MEA, RL, MRF-3P, SEM and Intrusion Porosimetry by Mercury. After the characterization, a standard membrane was selected with their respective sintering condition for the filterability tests. The effluent was provided by a local Textile Industry and characterized at the entry and exit of the treatment plant. A statistical analysis was used to study the effluent using the following parameters: pH, temperature, EC, SS, SD, oil and grease, turbidity, COD, DO, total phosphorus, chlorides, phenols, metals and fecal coliform. The filtered effluent was evaluated by using the same parameters. These results demonstrate that the feasibility of the use of porous alumina ceramic membranes for removing contaminants from textile effluent with improved average pore size of 0.4 micrometre (distribution range varying from 0,025 to 2.0 micrometre), with total porosity of 29.66%, and average percentages of color removal efficiency of 89.02%, 92.49% of SS, turbidity of 94.55%, metals 2.70% (manganese) to 71.52% (iron) according to each metal and COD removal of 72.80%

Efeito de argilas organofílicas na estrutura e propriedades de nanocompósitos de poli(metacrilato de metila)

Nacomposites of polymers and lamellar clayminerals, has generated high scientific and technological interest, for having mechanical properties and gas barriers differentiated of polymers and conventional composites. In this work, it was developed nanocomposites by single screw extruder and injection, utilizing commercial raw material, with the goal to investigate the quality of new developed materials. It was evaluated the influence of the content and the kind of clay in the structure and in the nanocomposites properties. It was used regular and elastomeric poly (methyl methacrylate) (Acrigel LEP 100 and Acrigel ECP800) and six montmorillonites (Cloisite 10A, 11B, 15A, 20A, 25A e 30B) at the concentration of 1% e 3% in weight. The nanocomposites were characterized by X-ray diffraction (XRD), thermal gravimetric analysis (TGA), transmission electron microscopy (TEM), colorimetric, optical transparency, flexural and tensile tests, Rockwell hardness and esclerometry. It was founded that is possible to obtain intercalated and exfoliated nanocomposites PMMA/MMT, and the top results was obtained in the materials with 1%in clay weight organophilizated with 2M2HT (Cloisite 15A and 20A) presented intercalate and hybrid morphology (exfoliated and flocullated). The ones that was produced with organophilizated clay with 2MHTL8 (Cloisite 30B) had excellent visual quality, but the majority presented hybrid morphology. In the materials processed with organophilizated clay with MT2ETOH (Cloisite 30B), there were color change and loss of transparency. It occurs improvement in a few mechanical properties, mainly in the materials produced with PMMA elastomeric (Acrigel ECP800), being more significant, the increase in the resistance to stripping in those nanocomposites

Rejeito de xisto como adsorvente para remoção de fenol em águas produzidas na indústria de petróleo

Produced water is the main effluent linked to the activity of extraction of oil and their caring management is necessary due to the large volume involved, to ensure to minimize the negative impacts of discharges of these waters in the environment. This study aimed to analyze the use of retorted shale, which is a reject from the pyrolysis of pirobituminous shale, as adsorbent for the removal of phenols in produced water. The material was characterized by different techniques (grain sized analysis, thermal analysis, BET, FRX, FT-IR, XRD and SEM), showing the heterogeneity in their composition, showing its potential for the removal of varied compounds, as well as the phenols and their derivatives. For the analysis of the efficiency of the oil shale for the adsorption process, assays of adsorption balance were carried through, and also kinetic studies and dynamics adsorption, in the ETE of the UTPF of Petrobras, in Guamaré-RN. The balance assays shown a bigger conformity with the model of Langmuir and the kinetic model more adjusted to describe the adsorption of phenols in retorted shale was of pseudo-second order. The retorted shale presented a low capacity of adsorption of phenols (1,3mg/g), when related to others conventional adsorbents, however it is enough to the removal of these composites in concentrations presented in the produced water of the UTPF of Guamaré. The assays of dynamics adsorption in field had shown that the concentration of phenol in the effluent was null until reaching its rupture (58 hours). The results showed the possibility of use of the reject for removal of phenols in the final operations of the treatment process, removing as well, satisfactorily, the color and turbidity of the produced water, with more than 90% of removal

Atividade antiplasmódica e toxicológica de plantas medicinais usadas popularmente no Brasil : uma abordagem etnobotânica

Malaria is a disease of global distribution, recognized by governments around the world as a serious public health problem, affecting more than 109 countries and territories and endangering more than 3.3 billion people. The economic costs of this disease are also relevant: the African continent itself has malaria-related costs of about $ 12 billion annually. Nowadays, in addition to chloroquine, Plasmodium falciparum is resistant to many drugs used in the treatment of malaria, such as amodiaquine, mefloquine, quinine and sulfadoxine-pyrimethamine; resistance of Plasmodium vivax to treatments, although less studied, is also reported. Nature, in general, is responsible for the production of most known organic substances, and the plant kingdom is responsible for the most of the chemical diversity known and reported in the literature. Most medicinal plants commercialized in Brazil, however, are of exotic origin, which makes the search for endemic medicinal plants, besides a patent necessity, a fascinating subject of academic research and development. This study aimed to: (i) verify the antimalarial activity of ethanolic and hydroalcoholic extracts of Boerhavia paniculata Rich. And acetonic extract of Clethra scabra Pers. in Swiss albino mice infected by Plasmodium berghei NK65, (ii) observe possible combined effects between the course of infection by P. berghei NK65 and administration of these extracts in Swiss albino mice, and (iii) conduct a preliminary study of the acute toxicity of these extracts in Swiss albino mice. All extracts notable pharmacological activities - with parasite infections inhibitions ranging from 22% to 54%.These characteristics suggest that the activities are relevant, although comparatively lower than the activity displayed by the positive control group (always above 90%). The general framework of survival analysis demonstrates an overall reduction in survival times for all groups. Necroscopy has not pointed no change in color, shape, size and/or consistency in the evaluated organs - the only exception was the livers of rats submitted to treatment to hydroalcoholic extracts: these organs have been presented in a slightly congestive aspect with mass increasing roughly 28% higher than the other two groups and a p-value of 0.0365. The 250 mg/Kg ethanolic group has been pointed out by the Dunn s post test, as the only class with simultaneous inequalities (p<0.05) between positive and negative control groups. The extracts, notably ethanol extract, have, in fact, a vestigial antimalarial activity, although well below from the ones perceived to chloroquine-treated groups; nevertheless, the survival times of the animals fed with the extracts do not rise by presence of such therapy. Both the toxicopharmacological studies of the synergism between the clinical course of malaria and administration of extracts and the isolated evaluation of toxicity allow us to affirm the absence of toxicity of the extracts at the level of CNS and ANS, as well as their non-influence on food and water consumption patterns, until dosages of 500 mg/Kg. Necroscopic analysis leads us to deduct a possible hepatotoxic effect of hydroalcoholic extract at dosages of 500 mg/Kg, and an innocuous tissue activity of the ethanol extract, in the same dosage. We propose a continuation of the studies of these extracts, with protocol modifications capable of addressing more clearly and objectively their pharmacological and toxicological aspects

Características fisico-químicas e sensoriais da carne de bubalinos Murrah abatidos em diferentes períodos de confinamento

Objetivou-se avaliar as características físicas, químicas e sensoriais da carne de búfalos abatidos em diferentes períodos de confinamento. Foram utilizados 20 bubalinos da raça Murrah, castrados, descornados, com idade média inicial de 15 meses, abatidos aos 75, 100, 125 ou 150 dias de confinamento. Após o abate, as carcaças foram identificadas e resfriadas por 24 horas. Durante a desossa, foram colhidas amostras do contrafilé entre a 10ª e 11ª costelas para análise das características sensoriais e das perdas por cocção; entre a 11ª e 12ª costelas para avaliação da composição centesimal, do valor calórico, do pH e do índice de fragmentação miofibrilar (IFM); e entre a 12ª e 13ª costelas para a avaliação do escore de marmorização e da força de cisalhamento. A composição centesimal, o pH, a força de cisalhamento, o valor calórico, as perdas por cocção e o IFM não diferiram estatisticamente entre os períodos de confinamento. O grau de marmorização diferiu entre as idades de abate, uma vez os animais abatidos aos 75 dias de confinamento apresentaram escore de 1,25; os abatidos aos 100 e 125 dias, escore 2; e aqueles abatidos aos 150 dias de confinamento, escore 2,2. em todos os períodos de confinamento, a carne bubalina foi classificada como macia (média 3,94 kgf) e apresentou com características que não diferiram pelo painel sensorial entre os 75 e 150 dias de confinamento. O abate de bubalinos aos 75 e 150 dias de confinamento não influencia as características sensoriais sabor, aroma e cor da carne bubalina.

Características bioquímicas da carne de bubalinos Mediterrâneo terminados em confinamento e abatidos em diferentes pesos

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Doses de nitrogênio e potássio na produção de grama esmeralda

O nitrogênio e potássio são os nutrientes requeridos em maiores quantidades pelas gramas e no Brasil não se tem informação da quantidade a ser aplicada para se obter a formação de tapete em menor tempo possível. Dois experimentos foram instalados em vasos em casa de vegetação, com o objetivo de avaliar o efeito de doses de nitrogênio e de potássio na produção de tapetes de grama esmeralda (Zoysia japonica). O delineamento utilizado para cada experimento foi fatorial com doses de N ou K e épocas de avaliação. Foram aplicadas quatro doses de nitrogênio (0, 200, 400 e 600 kg ha-1) e quatro doses de potássio (0, 100, 200, e 300 kg ha-1). As doses de nitrogênio e potássio foram aplicadas parceladamente em cobertura. O aumento das doses de N influenciou a taxa de cobertura do solo pela grama (TCS) permitindo a formação do tapete com a dose de 408 kg ha-1 de N aos 198 dias após a colheita do tapete anterior, tempo menor quando comparado com as demais doses. A concentração de N na folha e da cor verde da grama foram influenciadas pelas doses de N podendo ser utilizadas para auxiliar na recomendação das doses de N. O aumento das doses de K não influenciou na TCS pela grama, sendo o teor no solo (1,4 mmol c dm-3) suficiente para a produção dos tapetes de grama esmeralda.