Micro Far-Infrared Reflectivity of CaNb(2)O(6) Single Crystal Fibers Grown by the Laser-Heated Pedestal Growth Technique

CaNb(2)O(6) single crystal fibers were grown by the laser-heated pedestal growth technique, directly from the starting reagents. Optically transparent fibers were obtained in the form of rods with elliptical cross-section, free from cracks, impurities, and secondary phases, with an average diameter of 0.4 mm and about 20 mm of length. The fibers grew within the orthorhombic Pbcn columbite structure, with the growth axis nearly parallel to the crystallographic a-direction. The parameters b and c were parallel to the shorter and larger ellipsis axes. A special setup using a microscope was developed to obtain the far-infrared reflectivity spectra of these micrometer-sized fibers, allowing the identification and assignment of 34 of the 38 polar phonons foreseen for the material. From these phonons, the intrinsic dielectric constant ( = 18.2) and quality factor ( of 185 THz) could be estimated, showing the potential of the material for applications in microwave circuitry. These results, along with previous polarized Raman data (Cryst. Growth Des. 2010, 10, 1569), allow us to present a comprehensive set of optical phonon modes and to discuss the potential use of designed CaNb(2)O(6) microcrystals in compact optical devices.

Thermo-optics parameters measurements in photorefractive sillenite Bi(12)SiO(20) crystals by thermal lens technique

The present work reports on the thermo-optical properties of photorefractive sillenite Bi(12)SiO(20) (BSO) crystals obtained by applying the Thermal Lens Spectrometry technique (TLS). This crystals presents one high photorefractive sensitivity in the region blue-green spectra, since the measurements were carried out at two pump beam wavelengths (514.5 nm and 750 nm) to study of the light-induced effects in this material (thermal and/or photorefractive). We determine thermo-optical parameters like thermal diffusivity (D), thermal conductivity (K) and temperature coefficient of the optical path length change (ds/dT) in sillenite crystals. These aspects, for what we know, not was studied in details up to now using the lens spectrometry technique and are very important against of the promising potentiality of applications these crystals in non linear optics, real time holography and optical processing data.

Immobilization of lutetium bisphthalocyanine in nanostructured biomimetic sensors using the LbL technique for phenol detection

This study describes the development of amperometric sensors based on poly(allylamine hydrochloride) (PAH) and lutetium bisphthalocyanine (LuPc(2)) films assembled using the Layer-by-Layer (LbL) technique. The films have been used as modified electrodes for catechol quantification. Electrochemical measurements have been employed to investigate the catalytic properties of the LuPc(2) immobilized in the LbL films. By chronoamperometry, the sensors present excellent sensitivity (20 nA mu M(-1)) in a wide linear range (R(2) = 0.994) up to 900 mu M and limit of detection (s/n = 3) of 37.5 x 10(-8) M for catechol. The sensors have good reproducibility and can be used at least for ten times. The work potential is +0.3 V vs. saturated calomel electrode (SCE). In voltammetry measurements, the calibration curve shows a good linearity (R(2) = 0.992) in the range of catechol up to 500 mu M with a sensitivity of 90 nA mu M(-1) and LD of 8 mu M. (C) 2011 Elsevier B.V. All rights reserved.

An Information Theory framework for two-stage binary image operator design

The design of translation invariant and locally defined binary image operators over large windows is made difficult by decreased statistical precision and increased training time. We present a complete framework for the application of stacked design, a recently proposed technique to create two-stage operators that circumvents that difficulty. We propose a novel algorithm, based on Information Theory, to find groups of pixels that should be used together to predict the Output Value. We employ this algorithm to automate the process of creating a set of first-level operators that are later combined in a global operator. We also propose a principled way to guide this combination, by using feature selection and model comparison. Experimental results Show that the proposed framework leads to better results than single stage design. (C) 2009 Elsevier B.V. All rights reserved.

Polyaniline/layered zirconium phosphate nanocomposites: Secondary-like doped polyaniline obtained by the layer-by-layer technique

In the present work, nanocomposites of polyaniline (PANI) and layered alpha-Zr(HPO4)(2).H2O (alpha-ZrP) were prepared using two different approaches: (i) the in situ aniline polymerization in the presence of the layered inorganic material and (ii) the layer-by-layer (LBL) assembly using an aqueous solution of the polycation emeraldine salt (ES-PANI) and a dispersion of exfoliated negative slabs of alpha-ZrP. These materials were characterized spectroscopically using mainly resonance Raman scattering at four exciting radiations and electronic absorption in the UV-VIS-NIR region. Structural and textural characterizations were carried out using powder X-ray diffraction (XRD) and scanning electron microscopy (SEM). The polymer obtained by the in situ aniline polymerization is located primarily in the external surface of the inorganic material although aniline monomers were intercalated between alpha-ZrP interlayer regions before oxidative polymerization. Through resonance Raman spectroscopy, it was observed that the formed polymer has semiquinone units (ES-PANI) and also azo bonds (-N = N-), showing that this method results in a polymer with a different structure from the usual ""head-to-tail"" ES-PANI. The LBL assembly of pre-formed ES-PANI and exfoliated alpha-ZrP particles produces homogeneous films with reproducible deposition from layer to layer, up to 20 bilayers. Resonance Raman (lambda(0) = 632.8 nm) spectrum of PANI/ZrP LBL film shows an enhancement in the intensity of the polaronic band at 1333 cm(-1) (nu C-N center dot+) and the decrease of the band intensity at 1485 cm(-1) compared to bulk ES-PANI. Its UV-VIS-NIR spectrum presents an absorption tail in the NIR region assigned to delocalized free charge carrier. These spectroscopic features are characteristic of highly conductive secondary doped PANI suggesting that polymeric chains in PANI/ZrP LBL film have a more extended conformation than in bulk ES-PANI.

Thermal analysis of biodegradable microparticles containing ciprofloxacin hydrochloride obtained by spray drying technique

Thermal analysis has been extensively used to obtain information about drug-polymer interactions and to perform pre-formulation studies of pharmaceutical dosage forms. In this work, biodegradable microparticles of poly(D,L-lactide-co-glycolide) (PLGA) containing ciprofloxacin hydrochloride (CP) in various drug:polymer ratios were obtained by spray drying. The main purpose of this study was to investigate the effect of the spray drying process on the drug-polymer interactions and on the stability of microparticles using differential scanning calorimetry (DSC), thermogravimetry (TG) and derivative thermogravimetry (DTG) and infrared spectroscopy (IR). The results showed that the high levels of encapsulation efficiency were dependant on drug:polymer ratio. DSC and TG/DTG analyses showed that for physical mixtures of the microparticles components the thermal profiles were different from those signals obtained with the pure substances. Thermal analysis data disclosed that physical interaction between CP and PLGA in high temperatures had occurred. The DSC and TG profiles for drug-loaded microparticles were very similar to the physical mixtures of components and it was possible to characterize the thermal properties of microparticles according to drug content. These data indicated that the spray dryer technique does not affect the physicochemical properties of the microparticles. In addition, the results are in agreement with IR data analysis demonstrating that no significant chemical interaction occurs between CP and PLGA in both physical mixtures and microparticles. In conclusion, we have found that the spray drying procedure used in this work can be a secure methodology to produce CP-loaded microparticles. (C) 2007 Elsevier B.V. All rights reserved.

A simple and sensitive detection of diquat herbicide using a dental amalgam electrode A comparison using the chromatographic technique

This paper describes the use of a dental amalgam electrode (DAE) to evaluate the electrochemical behaviour and to develop an electroanalytical procedure for determination of diquat herbicide in natural water and potato samples. The work was based on the square wave voltammetry responses of diquat, which presented two well-defined and reversible reduction peaks, at -0.56 V (peak 1) and -1.00V (peak 2). The experimental and voltammetric parameters were optimised, and the analytical curves were constructed and compared to similar curves performed by high performance liquid chromatography coupled to ultraviolet-visible spectrophotometric detector (HPLC/UV-vis). The responses were directly proportional to diquat concentration in a large interval of concentration, and the calculated detection limits were very similar, around 10 mu g L(-1) (10 ppb) for voltammetric and chromatographic experiments. These values were lower than the maximum residue limit established for natural water by the Brazilian Environmental Agency. The recovery percentages in pure electrolyte, natural water and potato samples showed values from 70% to 130%, demonstrating that the voltammetric methodology proposed is suitable for determining any contamination by diquat in different samples, minimising the toxic residues due to the use of liquid mercury or the adsorptive process relative to use of other solid surfaces. (C) 2009 Published by Elsevier B.V.

Image processing technique to count the number of logs in a timber truck

This paper summarises the results of using image processing technique to get information about the load of timber trucks before their arrival using digital images or geo tagged images. Once the images are captured and sent to sawmill by drivers from forest, we can predict their arrival time using geo tagged coordinates, count the number of (timber) logs piled up in a truck, identify their type and calculate their diameter. With this information we can schedule and prioritise the inflow and unloading of trucks in the light of production schedules and raw material stocks available at the sawmill yard. It is important to keep all the actors in a supply chain integrated coordinated, so that optimal working routines can be reached in the sawmill yard.   

A prática da educação física : problemas e alternativas transformadoras na ação educativa e social

O presente trabalho teve por objetivo traçar um quadro das dificuldades enfrentadas pelos professores que lidam com a Educação Física nas escolas de 1º, 2º e 3º graus de Porto Alegre e apresentar alternativas práticas para a superação destas dificuldades. Fizeram parte do estudo professores de Educação Física de 74 escolas estaduais, particulares e municipais de 1º e 2º graus e, professores de 6 estabelecimentos particulares e federais de ensino superior de Porto Alegre, num total de 275 indivíduos. A coleta de dados realizou-se através de questionário aberto, escala de opinião tipo Likert, observação de aulas e análise de documentos legais. Para a interpretação estatística utilizou-se os testes t análise de variância e teste U de Mann-Whitney. Para as informações de natureza qualitativa utilizou-se a técnica da Análise de Conteúdo. Os resultados obtidos indicaram que em relação à formação profissional recebida no curso de Educação Física atender às exigências da realidade de trabalho, não houve diferença significativa entre os professores das escolas particulares e públicas de 1º e 2º grau. Os professores, de forma geral, consideraram a área biológica como a mais adequada, seguida das áreas técnico-profissional e didático-pedagógica. A área humanística foi considerada a menos adequada. Em relação aos aspectos estruturais houve diferença significativa entre as respostas dos professores das escolas particulares e públicas de 1º e 2º graus. Os professores das escolas particulares consideram suas condições mais adequadas que os professores das escolas públicas. No ensino superior a situação se inverteu, os professores das escolas públicas consideraram suas condições melhores do que os das escolas particulares. Em relação ao local de trabalho constatou-se diferença significativa entre as escolas públicas e particulares de 1º e 2º grau. Os professores das escolas particulares consideram as condições de seu local de trabalho mais adequadas. Quanto aos aspectos didáticos-pedagógicos, tanto os professores das escolas públicas como das particulares de 1º e 2º graus consideraram que seus alunos mostram-se comprometidos com as aulas de Educação Física. Esses resultados formaram um quadro bastante coerente quando confrontados com a política econômica adotada pelo governo nas últimas décadas que repercutiu na educação sobre a forma de privatização e de utilização do ensino superior como instrumento de formação de mão-de-obra para o desenvolvimento do país nos moldes capitalistas. Como alternativas para a superação dessas dificuldades recomendamos: - a nível de formação profissional: o acréscimo de disciplinas da área humanística que permitam a aquisição de conhecimentos mais aprofundados sobre as questões políticas e sociais do professor de Educação Física; - a nível de local de trabalho: a integração dos conteúdos das aulas de Educação Física aos conteúdos das outras disciplinas curriculares principalmente nas primeiras séries do 1º grau; - em relação aos aspectos didático-pedagógicos: fornecer conhecimentos teóricos sobre a Educação Física que permitam aos alunos desenvolver atividades físicas e desportivas, mesmo fora da escola, de forma consciente e independente, com condições de identificar seus benefícios e malefícios sem auxílio do professor; - a nível estrutural recomendamos a militância em espaços que permitam uma interferência mais direta nas questões políticas e econômicas do país, tais como: associações, sindicatos e partidos políticos.

On choice of technique in the Robinson-Solow-Srinivasan model

We report results on the optimal \choice of technique" in a model originally formulated by Robinson, Solow and Srinivasan (henceforth, the RSS model) and further discussed by Okishio and Stiglitz. By viewing this vintage-capital model without discounting as a speci c instance of the general theory of intertemporal resource allocation associated with Brock, Gale and McKenzie, we resolve longstanding conjectures in the form of theorems on the existence and price support of optimal paths, and of conditions suÆcient for the optimality of a policy rst identi ed by Stiglitz. We dispose of the necessity of these conditions in surprisingly simple examples of economies in which (i) an optimal path is periodic, (ii) a path following Stiglitz' policy is bad, and (iii) there is optimal investment in di erent vintages at di erent times. (129 words)

Política de desenvolvimento e o setor de mineração: análise de discursos do governo do Peru no período de 1990 a 2009

Os estudos sobre desenvolvimento, sem dúvida, se mantiveram como um dos últimos bastiões do modernismo nas ciências sociais (Rapley, 2004). Muitos dos dilemas chave em estudos contemporâneos sobre desenvolvimento se centraram nas disjuntivas entre inovação teórica, política e prática (Simon, 2003). No entanto, a discussão que envolve a relação entre desenvolvimento e mineração, que interessa neste estudo, ainda permanece acrítica dentro da literatura dominante. Segundo Graulau (2008), o tema de mineração encontra-se num vaivém entre o favoritismo e a oposição. O estudo sob o ponto de vista normativo da mineração no campo de desenvolvimento mostra a mentalidade econômica de longa data que prevalece nesse campo. No Peru as reformas neoliberais implantadas desde a década 1990 têm promovido fortemente o setor de mineração. Os investimentos nacionais e estrangeiros, o volume das exportações e impostos certamente têm influenciado favoravelmente na economia em termos macroeconômicos, obtendo quantidades consideráveis de divisas (UNCTAD, 2008). Não obstante, a grande mineração parece não ter beneficiado as comunidades envolvidas com a extração de minérios (Barrantes, 2005; Glave e Kuramoto, 2007; Zegarra; Orihuela e Paredes, 2007). A quantidade e gravidade dos conflitos que vem acontecendo evidenciam a resistência ao setor, frente à ação discursiva do Estado peruano sobre o “desenvolvimento” que assegura o que a mineração traz. Neste contexto este estudo tem como objetivo analisar as práticas discursivas das políticas de mineração peruana em relação a construção do discurso de desenvolvimento no período compreendido entre 1990-2009. Com esse objetivo, foi necessário abordar primeiramente as principais teorias sobre desenvolvimento, mineração e mineração no Peru. No que diz respeito à metodologia o presente estudo utilizou duas técnicas de análise: a Análise Crítica de Discurso, baseado no método tridimensional proposto por Fairclough (2001), para realizar a análise de três discursos de representantes da política de mineração peruana, a segunda abordagem utiliza a Análise de Conteúdo de Bardin (2009), para examinar os artigos relacionados à política de mineração entre as principais revistas especializadas do setor–Mineria e Desde Adentro. Foram utilizadas também categorias de análise constantes e convergentes ao conceito de desenvolvimento para orientar a presente pesquisa. Finalmente as conclusões sugerem que as políticas de mineração reproduzidas pelas autoridades do Estado peruano introduziram práticas discursivas sobre desenvolvimento sustentável e que essas se mantêm relacionadas com as novas ordens de discurso: Responsabilidade Social, Minerção Sustentável, Mineração moderna, Gestão ambiental.