Infrared termography application in energy audits of buildings

The main objectives of this research are (i) to determine the correct use of infrared thermography in the energy analysis of buildings and to verify its application in conducting energy audits thereof; (ii) to conduct a proposal for a standard methodology (with its corresponding final report) for energy audit of buildings based on currently applicable regulations, specifying the parts of the audit process where the authors propose to include thermal inspections by using infrared thermography.

Current Problems Involving the Dismantle of Asbestos- Cement Sheets in Buildings. The Case of Central Market in Alicante

The project and the works described in this article mainly deal with the removal of the current asbestos-cement covering of the roof of the Central Market in Alicante and its replacement with zinc diamond-shaped scales, similar to the originals which were implemented in 1921 when the building was put into service. These upgrades were necessary to avoid the causes (and consequences) of rainwater infiltration, as described in an earlier report in 2006, also drafted by the author of this article. The article illustrates the difficulties involving the practical application of Spanish Code RD 396/2006 (minimum safety and health requirements for work with risk of exposure to asbestos) in a complex case such as this, especially with regard to aspects such as economic (increasing costs), technical (increased difficulty of implementation), and the total duration of the work (total increase in duration due to interference with other trades).

How buildings visualise client and architect: The problem that today’s user is typically not the client

An article presented at the last ICAT- conference stated at the end that buildings at all times tend to picture the people who had them erected. This paper aims to show the correctness of that statement. To this end, it will examine a number of typical residential buildings dating from the beginning of the seventeenth century up to today, investigate who had the buildings erected, and relate that to the performance of the buildings. This relation analysis will mainly use the scale but also the degree of diversity in function and appearance as factors. Furthermore, using economic data and data on the buildings to identify patterns, it will investigate how size of the property and relative size of the capital interest behind the building has developed. Since the authors live in Copenhagen and Copenhagen is very typical in its historical development, buildings and environments in and around the centre of Copenhagen are used as examples.

How to measure healthiness in buildings: Experiences in teaching with BIM tools

Introducing teaching about healthy solutions in buildings and BIM has been a challenge for the University of Alicante. Teaching attached to very tighten study plans conditioned the types of methods that could be used in the past. The worldwide situation of crisis that especially reached Spain and the bursting of the housing bubble generated a lack of employment that reached universities where careers related to construction, Architecture and Architectural Technologist, suffered a huge reduction in the number of students enrolled. In the case of the University of Alicante, students’ enrolment for Architectural Technology reached an 80% reduction. The necessity of a reaction against this situation made the teachers be innovative and use the new Bologna adapted study plans to develop new teaching experiences introducing new concepts: people wellbeing in buildings and BIM. Working with healthy solutions in buildings provided new approaches for building design and construction as an alternative to sustainability. For many years sustainability was the concept that applied to housing gave buildings an added value and the possibility of having viability in a very complex scenario. But after lots of experiences, the approved methodologies for obtaining sustainable housing were ambiguous and at the end, investors, designers, constructors and purchasers cannot find real and validated criteria for obtaining an effective sustainable house. It was the moment to work with new ideas and concepts and start facing buildings from the users’ point of view. At the same time the development of new tools, BIM, has opened a wide range of opportunities, innovative and suggestive, that allows simulation and evaluation of many building factors. This paper describes the research in teaching developed by the University of Alicante to adapt the current study plans, introducing work with healthy solutions in buildings and the use of BIM, with the aim of attracting students by improving their future employability. Pilot experiences have been carried out in different subjects based on the work with projects and case studies under an international frame with the cooperation of different European partner universities. The use of BIM tools, introduced in 2014, solved the problems that appeared in some subjects, mainly building construction, and helped with the evaluation of some healthy concepts that presented difficulties until this moment as knowledge acquired by the students was hard to be evaluated. The introduction of BIM tools: Vasari, FormIt, Revit and Light Control among others, allowed the study of precise healthy concepts and provided the students a real understand of how these different parameters can condition a healthy architectural space. The analysis of the results showed a clear acceptance by the students and gave teachers the possibility of opening new research lines. At the same time, working with BIM tools to obtain healthy solutions in building has been a good option to improve students’ employability as building market in Spain is increasing the number of specialists in BIM with a wider knowledge.

Buildings records, bound volume, 1811-1838

This bound volume, likely assembled by the Corporation in the 1850s, contains documents related to Harvard buildings which have been pasted onto the pages. The volume consists of correspondence and memoranda pertaining to the construction of Holworthy Hall, 1811-1812; contracts and correspondence relating to the construction of University Hall, 1813-1814; and correspondence regarding repairs to Massachusetts Hall overseen by Loammi Baldwin in 1812. Additional records pertaining to the construction of Gore Hall, 1834-1838; and the repairs to the Medical College on Mason Street in Boston, 1824 are also located in this volume.

Plan of College buildings and lot from Mr. Bulfinch, [ca. 1814]

Known as the Bulfinch view, this proposed site plan of the College grounds by Charles Bulfinch depicts University Hall at the center of the drawing surrounded by Massachusetts, Harvard, Hollis, Stoughton, and Holworthy Halls. Several unlabeled buildings are displayed in the plan.

London, England, 1890 (Raster Image)

This layer is a georeferenced raster image of the historic paper map entitled: Central London. It was published by G.W. Bacon & Co. in 1890. Scale [ca. 1:15,840]. The image inside the map neatline is georeferenced to the surface of the earth and fit to British National Grid coordinate system (British National Grid, Airy Spheroid OSGB (1936) Datum). All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, index maps, legends, or other information associated with the principal map. This map shows features such as roads, railroads, drainage, built-up areas and selected buildings, industry locations (e.g. mills, factories, etc.), docks, parks, cemeteries, city district boundaries, and more. This layer is part of a selection of digitally scanned and georeferenced historic maps from The Harvard Map Collection as part of the Imaging the Urban Environment project. Maps selected for this project represent major urban areas and cities of the world, at various time periods. These maps typically portray both natural and manmade features at a large scale. The selection represents a range of regions, originators, ground condition dates, scales, and purposes.

Boston Harbor Including Boston and Surroundings, Massachusetts, Nautical Chart, 1775 (Image 1 of 2) (Raster Image)

This layer is a georeferenced raster image of the historic nautical chart entitled: A chart of the harbour of Boston (sheet originally published in 1775). The map is [sheet 21] from the Atlantic Neptune atlas Vol. 3 : Charts of the coast and harbors of New England, from surveys taken by Samuel Holland and published by J.F.W. Des Barres, 1781. Scale [ca. 1:25,000]. This layer is image 1 of 2 total images of the two sheet source map, representing the western portion of the map. Covers Boston and surrounding towns and Boston Harbor, Massachusetts. The image is georeferenced to the surface of the earth and fit to the 'World Mercator' (WGS 84) projected coordinate system. All map collar information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, or other information associated with the principal map. This map shows coastal features such as harbors, inlets, rocks, channels, points, coves, shoals, islands, and more. Includes also selected land features such as cities and towns, roads, fortifications, and buildings. Relief is shown by hachures; depths by soundings and shading. This layer is part of a selection of digitally scanned and georeferenced historic maps from The Harvard Map Collection. The entire Atlantic Neptune atlas Vol. 3 : Charts of the coast and harbors of New England has been scanned and georeferenced as part of this selection.

Norfolk County, Massachusetts, 1858 (Image 4 of 4) (Raster Image)

This layer is a georeferenced raster image of the historic paper map entitled: Map of the county of Norfolk, Massachusetts, based upon the details of the trigonometrical survey of the state; the details from actual surveys under the direction of Henry F. Walling. Supt. of the state map. It was published by Smith & Bumstead in 1858. Scale [ca. 1:40,000]. This layer is image 4 of 4 total images, representing the northeast portion of the four sheet source map.The image inside the map neatline is georeferenced to the surface of the earth and fit to the Massachusetts State Plane Coordinate System, Mainland Zone (in Feet) (Fipszone 2001). All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, index maps, legends, or other information associated with the principal map. This map shows features such as roads, railroads, drainage, public buildings, schools, churches, cemeteries, industry locations (e.g. mills, factories, mines, etc.), private buildings with names of property owners, town and school district boundaries, and more. Relief shown by hachures. It includes many cadastral insets of individual county towns and villages. It also includes illustrations, business directories, and tables of statistics and distances.This layer is part of a selection of digitally scanned and georeferenced historic maps of Massachusetts from the Harvard Map Collection. These maps typically portray both natural and manmade features. The selection represents a range of regions, originators, ground condition dates (1755-1922), scales, and purposes. The digitized selection includes maps of: the state, Massachusetts counties, town surveys, coastal features, real property, parks, cemeteries, railroads, roads, public works projects, etc.

New Orleans, Louisiana, 1884 (Raster Image)

This layer is a georeferenced raster image of the historic paper map entitled: Map of the city of New Orleans showing location of exposition grounds and all approaches thereto by land & water, [by] the World's Industrial and Cotton Centennial Exposition, New Orleans, La., U.S.A., Department of Installation. It was published by The Exposition ca. 1884. Scale [ca. 1:2,000]. Covers also adjacent portions of Jefferson and St. Bernard Parishes. The image inside the map neatline is georeferenced to the surface of the earth and fit to the Louisiana State Plane Coordinate System, South NAD83 (in Feet) (Fipszone 1702). All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, or other information associated with the principal map. This map shows features such as exposition grounds, railroads, roads, canals, levees, drainage, block numbers, land ownership in outlying areas, selected public and industrial buildings, cemeteries, Parish boundaries, ferry routes, and more. Depths shown by soundings. Includes inset views, plans, and engravings: Perspective view of the buildings and grounds from the Northeast -- Mexican national headquarters -- Grand Rapids (Mich.) furniture pavilion -- [South pass] -- View of New Orleans in 1719 -- Railroad map of Louisiana and Texas -- Plan of New Orleans in 1770 by Capt.n Pittman of the British Army -- Ground plan -- United States and state exhibits -- Art gallery -- Main building -- Factories and Mills -- Horticultural hall. This layer is part of a selection of digitally scanned and georeferenced historic maps from The Harvard Map Collection as part of the Imaging the Urban Environment project. Maps selected for this project represent major urban areas and cities of the world, at various time periods. These maps typically portray both natural and manmade features at a large scale. The selection represents a range of regions, originators, ground condition dates, scales, and purposes.

London, England, 1749 (Raster Image)

This layer is a georeferenced raster image of the historic paper map entitled: To Martin Folkes esq.r, president of the Royal Society : this plan of the cities of London and Westminster and borough of Southwark, with the contiguous buildings is humbly inscribed, by his most humble servants John Pine and John Tinney ; Isaac Basire [&] R.W. Seale engraved the plan letters. It was published by John Pine : John Tinney, print and map sellar in May 20th, 1749. Scale [ca. 1:15,000]. The image inside the map neatline is georeferenced to the surface of the earth and fit to the British National Grid coordinate system (British National Grid, Airy Spheroid OSGB (1936) Datum). All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, index maps, legends, or other information associated with the principal map. This map shows features such as roads, drainage, selected buildings, parks, ground cover, docks, and more. Relief is shown by hachures. This layer is part of a selection of digitally scanned and georeferenced historic maps from The Harvard Map Collection as part of the Imaging the Urban Environment project. Maps selected for this project represent major urban areas and cities of the world, at various time periods. These maps typically portray both natural and manmade features at a large scale. The selection represents a range of regions, originators, ground condition dates, scales, and purposes.

London, England, 1783 (Raster Image)

This layer is a georeferenced raster image of the historic paper map entitled: Bowles's new pocket plan of the cities of London & Westminster with the borough of Southwark : comprehending the new buildings and other alterations to the year 1783. It was printed for the proprietor Carrington Bowles, Jan. 6, 1783. Scale [ca. 1:9,800]. The image inside the map neatline is georeferenced to the surface of the earth and fit to the British National Grid coordinate system (British National Grid, Airy Spheroid OSGB (1936) Datum). All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, index maps, legends, or other information associated with the principal map. This map shows features such as roads, drainage, selected buildings, churches, built-up areas, docks, parks, cemeteries, city district boundaries, and more. Includes a list of references for points of interest and an explanation list. This layer is part of a selection of digitally scanned and georeferenced historic maps from The Harvard Map Collection as part of the Imaging the Urban Environment project. Maps selected for this project represent major urban areas and cities of the world, at various time periods. These maps typically portray both natural and manmade features at a large scale. The selection represents a range of regions, originators, ground condition dates, scales, and purposes.

London, England, 1814 (Raster Image)

This layer is a georeferenced raster image of the historic paper map entitled: London in miniature : with the surrounding villages, an entire new plan in which the improvements both present and intended are actually reduced (by permission) from the surveys of the several proprietors : the whole laide down from the best authorities, carefully corrected to the present time by Edward Mogg. It was published by Edward Mogg in 1814. Scale [ca. 1:16,000]. The image inside the map neatline is georeferenced to the surface of the earth and fit to the British National Grid coordinate system (British National Grid, Airy Spheroid OSGB (1936) Datum). All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, index maps, legends, or other information associated with the principal map. This map shows features such as roads, drainage, selected buildings, built-up areas, parks, borough boundaries, docks, bridges, and more. Relief is shown by hachures. This layer is part of a selection of digitally scanned and georeferenced historic maps from The Harvard Map Collection as part of the Imaging the Urban Environment project. Maps selected for this project represent major urban areas and cities of the world, at various time periods. These maps typically portray both natural and manmade features at a large scale. The selection represents a range of regions, originators, ground condition dates, scales, and purposes.