943 resultados para Chebyshev polynomials of the first kind
Resumo:
Ocean Drilling Program Legs 127 and 128 in the Japan Sea have revealed the existence of numerous dark-light rhythms of remarkable consistency in sediments of late Miocene, latest Pliocene, and especially Pleistocene age. Light-colored units within these rhythms are massive or bioturbated, consist of diatomaceous clays, silty clays, or nannofossil-rich clays, and are generally poor in organic matter. Dark-colored units are homogeneous, laminated, or thinly bedded and include substantial amounts of biogenic material such as well-preserved diatoms, planktonic foraminifers, calcareous nannofossils, and organic matter (maximum 7.4 wt%). The dark-light rhythms show a similar geometrical pattern on three different scales: First-order rhythms consist of a cluster dominated by dark-colored units followed by a cluster dominated by light-colored units (3-5 m). Spectral analysis of a gray-value time series suggests that the frequencies of the first-order rhythms in sediments of latest Pliocene and Pleistocene age correlate to the obliquity and the eccentricity cycles. The second-order dark-light rhythms include a light and a dark-colored unit (10-160 cm). They were formed in time spans of several hundred to several ten thousand years, with variance centering around 10,500 yr. This frequency may correspond to half the precessional cycle. Third-order rhythms appear as laminated or thinly bedded dark-light couplets (2-15 mm) within the dark-colored units of the second-order rhythms and may represent annual frequencies. In interpreting the rhythms, we have to take into account that (1) the occurrence of the first- and second-order rhythms is not necessarily restricted to glacial or interglacial periods as is shown by preliminary stable-isotope analysis and comparison with the published d18O record; (2) they appear to be Milankovitch-controlled; and (3) a significant number of the rhythms are sharply bounded. The origin of the dark-light rhythms is probably related to variations in monsoonal activity in the Japan Sea, which show annual frequencies, but also operates in phase with the orbital cycles.
Resumo:
The results of an investigation of tintinnids from the western Arabian Sea are described. A total of 134 closing-net samples was obtained from 22 stations of the German "Meteor" expedition 1964/1965. Distribution charts of the dominant species of tintinnids from the study area are presented as well as a list of the world-wide distribution of these species as derived from the literature. Tintinnids were most abundant in the surface waters. The layer from 0 - 25 m yielded a maximum 94.3% and a minimum of 61.3% of the tintinnids present from 0 - 175 m; the mean was 80%. There was no significant difference in the vertical distribution between day and night stations nor was there any indication of the influence of the thermocline upon vertical distribution of tintinnids. TS-diagrams show different water types in the western Arabian Sea. Temperatur-salinity-tintinnid -diagrams indicate regional patterns in the distribution of various species of tintinnids. Some tintinnids can be used as indicator species: Climacocylis scalaria, Parundella lohmanni and Amphorella amphora were typical for the Somali Current whereas Rhabdonella apophysata and Branditella palliata indicated the presence of East African Coastal Current water. The concentration of tintinnids in the upper 25 m raged between 4,800 and 39,300 individuals/m**3 (mean 19,000/m**3). Plasma volume of tintinnids was calculated to permit comparison of different links in the food chain. There was a mean of 51 mm**3/m**2 in the upper layer, equivalent to a concentration of 2 mm**3/m**3. Carbon values were computed from the plasma volume of tintinnids, phytoplankton and larger zooplankton. The ratio of phytoplankton plus microzooplankton carbon to large zooplankton carbon was 1 : 0.8 in the Somali Current, 1 : 0.4 in the East African Coastal Current and 1 : 1.2 in the mixing zone of these current systems. Tintinnids are one of the first links in the food chain. It is very likely that a part of the organic detritus and of the nanoplankton is transfered to large herbivores or omnivores via tintinnids and other protozoans. This mechanism might be especially effective during seasons when large phytoplankters are not available in the ocean.
Resumo:
Bathymetry based on data recorded during TTR6 between 05.07.1996 and 20.08.1996 in the Black Sea. In the central Black Sea, the aim of TTR-6 the investigation was a bathymetric map of a field of mud volcanoes known from the previous TTR cruises, during transit. In the Sorokin Trough, where gas hydrates were earlier obtained from sea bottom sediments the primary goals concerned the elucidation of the structure of clay diapiric folds and the searching for mud volcanoes and other evidence for fluid flux through the seafloor. The task of looking for the seafloor manifestation of deep fluid emanation was set in the Pallas Uplift area. The EM12s surveying on the Caucasian margin was aimed at the construction of the first detailed bathymetric map of this area.
Resumo:
This paper explores the process of creation of the netbook market by Taiwanese firms as an example of a disruptive innovation by latecomer firms. As an analytical framework, I employ the global value chain perspective to capture the dynamics of vertical inter-firm relationships that drive some firms in the chain to change the status quo of the industry. I then divide the process of the emergence of the netbook market into three consecutive stages, i.e. (1) the launch of the first-generation netbook by a Taiwanese firm named ASUSTeK, (2) the response of the two powerful platform leaders of the industry, Intel and Microsoft Intel, to ASUSTeK’s innovation, and (3) the market entry by another powerful Taiwanese firm, Acer, and explain how Taiwanese firms broke the Intel-centric market and tapped into the market-creating innovation opportunities that had been suppressed by the two powerful platform leaders. I also show that the creation of the netbook industry was an evolutionary process in which a series of responses by different industry players led to changes in the status quo of the industry.
Resumo:
The aim of the present work is to provide an in-depth analysis of the most representative mirroring techniques used in SPH to enforce boundary conditions (BC) along solid profiles. We specifically refer to dummy particles, ghost particles, and Takeda et al. [Prog. Theor. Phys. 92 (1994), 939] boundary integrals. The analysis has been carried out by studying the convergence of the first- and second-order differential operators as the smoothing length (that is, the characteristic length on which relies the SPH interpolation) decreases. These differential operators are of fundamental importance for the computation of the viscous drag and the viscous/diffusive terms in the momentum and energy equations. It has been proved that close to the boundaries some of the mirroring techniques leads to intrinsic inaccuracies in the convergence of the differential operators. A consistent formulation has been derived starting from Takeda et al. boundary integrals (see the above reference). This original formulation allows implementing no-slip boundary conditions consistently in many practical applications as viscous flows and diffusion problems.
Resumo:
The results obtained after incorporating the competence “creativity” to the subject Technical Drawing of the first course of the Degree in Forestry, Technical University of Madrid, are presented in this study.At first, learning activities which could serve two functions at the same time -developing students’ creativity and developing other specific competences of the subject- were considered. Besides, changes in the assessment procedure were made and a method which analyzes two aspects of the assessment of the competence creativity was established. On the one hand, the products are evaluated by analyzing the outcomes obtained by students in the essays suggested and by establishing a parameter to assess the creativity expressed in those essays. On the other, an assessment of the student is directly carried out through a psychometric test which has been previously chosen by the team.Moreover, these results can be applied to similar or could be of general application
Resumo:
An aerodynamic optimization of the ICE 2 high-speed train nose in term of front wind action sensitivity is carried out in this paper. The nose is parametrically defined by Be?zier Curves, and a three-dimensional representation of the nose is obtained using thirty one design variables. This implies a more complete parametrization, allowing the representation of a real model. In order to perform this study a genetic algorithm (GA) is used. Using a GA involves a large number of evaluations before finding such optimal. Hence it is proposed the use of metamodels or surrogate models to replace Navier-Stokes solver and speed up the optimization process. Adaptive sampling is considered to optimize surrogate model fitting and minimize computational cost when dealing with a very large number of design parameters. The paper introduces the feasi- bility of using GA in combination with metamodels for real high-speed train geometry optimization.
Resumo:
A description of the first renewable forward market mechanisms in the Iberian Electricity Market is provided. A contract for difference mechanism is available in Spain since March 2011between the last resort suppliers and the special regime (renewables and cogeneration) settling the price differences between the equilibrium price of the forward regulated auctions for the last resort supply and the spot price of the corresponding delivery period. Regulated auctions of baseload futures of the Portuguese zone in which the Portuguese last resort supplier sells the special regime production exist since December 2011. The experience gained from renewables auctions in Latin America could be used in the Iberian Electricity market, complementing these first market mechanisms. Introduction of renewable auctions at least for the most mature technologies (i.e. wind) in Spain and Portugal providing a fair price for the renewable generation will be of utmost importance in the short term to diminish the tariff deficit caused by the massive deployment of the feed-in-tariff scheme. Liquidity in the forward markets will also increase as a result of the entry of renewable generation companies intending to maximize their profits due to gradual suppression of feed in tariff schemes.
Resumo:
This paper deals with the assessment of the contribution of the second flexural mode to the dynamic behaviour of simply supported railway bridges. Alluding to the works of other authors, it is suggested in some references that the dynamic behaviour of simply supported bridges could be adequately represented taking into account only the contribution of the fundamental flexural mode. On the other hand, the European Rail Research Institute (ERRI) proposes that the second mode should also be included whenever the associated natural frequency is lower than 30 Hz]. This investigation endeavours to clarify the question as much as possible by establishing whether the maximum response of the bridge, in terms of displacements, accelerations and bending moments, can be computed accurately not taking account of the contribution of the second mode. To this end, a dimensionless formulation of the equations of motion of a simply supported beam traversed by a series of equally spaced moving loads is presented. This formulation brings to light the fundamental parameters governing the behaviour of the beam: damping ratio, dimensionless speed $ \alpha$=VT/L, and L/d ratio (L stands for the span of the beam, V for the speed of the train, T represents the fundamental period of the bridge and d symbolises the distance between consecutive loads). Assuming a damping ratio equal to 1%, which is a usual value for prestressed high-speed bridges, a parametric analysis is conducted over realistic ranges of values of $ \alpha$ and L/d. The results can be extended to any simply supported bridge subjected to a train of equally spaced loads in virtue of the so-called Similarity Formulae. The validity of these formulae can be derived from the dimensionless formulation mentioned above. In the parametric analysis the maximum response of the bridge is obtained for one thousand values of speed that cover the range from the fourth resonance of the first mode to the first resonance of the second mode. The response at twenty-one different locations along the span of the beam is compared in order to decide if the maximum can be accurately computed with the sole contribution of the fundamental mode.
Resumo:
A model of the mammalian retina and the behavior of the first layers in the visual cortex is reported. The building blocks are optically programmable logic cells. A model of the retina, similar to the one reported by Dowling (1987) is presented. From the model of the visual cortex obtained, some types of symmetries and asymmetries are possible to be detected
Resumo:
A first study in order to construct a simple model of the mammalian retina is reported. The basic elements for this model are Optical Programmable Logic Cells, OPLCs, previously employed as a functional element for Optical Computing. The same type of circuit simulates the five types of neurons present in the retina. Different responses are obtained by modifying either internal or external connections. Two types of behaviors are reported: symmetrical and non-symmetrical with respect to light position. Some other higher functions, as the possibility to differentiate between symmetric and non-symmetric light images, are performed by another simulation of the first layers of the visual cortex. The possibility to apply these models to image processing is reported.
Resumo:
This paper is part of a set of publications related with the development of mathematical models aimed to simulate the dynamic input and output of experimental nondestructive tests in order to detect structural imperfections. The structures to be considered are composed by steel plates of thin thickness. The imperfections in these cases are cracks and they can penetrate either a significant part of the plate thickness or be micro cracks or superficial imperfections. The first class of cracks is related with structural safety and the second one is more connected to the structural protection to the environment, particularly if protective paintings can be deteriorated. Two mathematical groups of models have been developed. The first group tries to locate the position and extension of the imperfection of the first class of imperfections, i.e. cracks and it is the object of the present paper. Bending Kirchoff thin plate models belong to this first group and they are used to this respect. The another group of models is dealt with membrane structures under the superficial Rayleigh waves excitation. With this group of models the micro cracks detection is intended. In the application of the first group of models to the detection of cracks, it has been observed that the differences between the natural frequencies of the non cracked and the cracked structures are very small. However, geometry and crack position can be identified quite accurately if this comparison is carried out between first derivatives (mode rotations) of the natural modes are used instead. Finally, in relation with the analysis of the superficial crack existence the use of Rayleigh waves is very promising. The geometry and the penetration of the micro crack can be detected very accurately. The mathematical and numerical treatment of the generation of these Rayleigh waves present and a numerical application has been shown.
Resumo:
The aim of this study was to evaluate if early defoliation can be an alternative to bunch thinning in limiting yield and improving quality in grapes of the white cultivar Loureiro (Vitis vinifera L.), grafted onto 1103P. The field trial had been set up in a commercial vineyard in Vinhos Verdes Region (Northwest of Portugal, 41º 48? 53? N, 8º 24? 42? W). Treatments studied, performed five days before full bloom were: LR5 ? Leaf removal of the first five basal leaves, performed manually, LR8 ? Leave removal of the first eight basal leaves, LRM ? mechanical leaf removal and C ? the control, without defoliation. This paper reports the results of four years (2010-2013). The results presented a significant removal of main leaf area after defoliation principally in the most intensive treatment (LR8) but at harvest, the total leaf area had been compensated by lateral regrowth and no statistical differences between the treatments and the control were found. Early defoliation caused a decrease in fruit set and also a significant reduction in the diameter of the berry within the more severe defoliation treatments (LR5 and LR8). Yield factors were also significantly affected by the defoliation, causing a reduction of bunch weight and in 2013 a yield reduction in LR8 and LRM, and in 2010 in LR8. Conversely, LR5 presented a yield always similar to the control C. The reduction of cluster compactness and the substantial improvement of the microclimate at the cluster level significantly reduced bunch rot incidence in the defoliated modalities compared to control. No carry-over effects, along the four years trial were observed Early defoliation proved to be a canopy management technique that can have a strong impact in the final quality of grapes, reducing the compactness and lower the incidence and intensity of bunch rot, even if the reduction of yield observed in other papers had not been observed in all modalities.
Resumo:
Cosmids from the 1A3–1A10 region of the complete miniset were individually subcloned by using the vector M13 mp18. Sequences of each cosmid were assembled from about 400 DNA fragments generated from the ends of these phage subclones and merged into one 189-kb contig. About 160 ORFs identified by the CodonUse program were subjected to similarity searches. The biological functions of 80 ORFs could be assigned reliably by using the WIT and Magpie genome investigation tools. Eighty percent of these recognizable ORFs were organized in functional clusters, which simplified assignment decisions and increased the strength of the predictions. A set of 26 genes for cobalamin biosynthesis, genes for polyhydroxyalkanoic acid metabolism, DNA replication and recombination, and DNA gyrase were among those identified. Most of the ORFs lacking significant similarity with reference databases also were grouped. There are two large clusters of these ORFs, one located between 45 and 67 kb of the map, and the other between 150 and 183 kb. Nine of the loosely identified ORFs (of 15) of the first of these clusters match ORFs from phages or transposons. The other cluster also has four ORFs of possible phage origin.
Resumo:
Podospora anserina is a filamentous fungus with a limited life span. Life span is controlled by nuclear and extranuclear genetic traits. Herein we report the nature of four alterations in the nuclear gene grisea that lead to an altered morphology, a defect in the formation of female gametangia, and an increased life span. Three sequence changes are located in the 5′ upstream region of the grisea ORF. One mutation is a G → A transition at the 5′ splice site of the single intron of the gene, leading to a RNA splicing defect. This loss-of-function affects the amplification of the first intron of the mitochondrial cytochrome c oxidase subunit I gene (COI) and the specific mitochondrial DNA rearrangements that occur during senescence of wild-type strains. Our results indicate that the nuclear gene grisea is part of a molecular machinery involved in the control of mitochondrial DNA reorganizations. These DNA instabilities accelerate but are not a prerequisite for the aging of P. anserina cultures.