Automated fit quantification of tibial nail designs during the insertion using computer three-dimensional modelling

Intramedullary nailing is the standard fixation method for displaced diaphyseal fractures of the tibia. An optimal nail design should both facilitate insertion and anatomically fit the bone geometry at its final position in order to reduce the risk of stress fractures and malalignments. Due to the nonexistence of suitable commercial software, we developed a software tool for the automated fit assessment of nail designs. Furthermore, we demonstrated that an optimised nail, which fits better at the final position, is also easier to insert. Three-dimensional models of two nail designs and 20 tibiae were used. The fitting was quantified in terms of surface area, maximum distance, sum of surface areas and sum of maximum distances by which the nail was protruding into the cortex. The software was programmed to insert the nail into the bone model and to quantify the fit at defined increment levels. On average, the misfit during the insertion in terms of the four fitting parameters was smaller for the Expert Tibial Nail Proximal bend (476.3 mm2, 1.5 mm, 2029.8 mm2, 6.5 mm) than the Expert Tibial Nail (736.7 mm2, 2.2 mm, 2491.4 mm2, 8.0 mm). The differences were statistically significant (p ≤ 0.05). The software could be used by nail implant manufacturers for the purpose of implant design validation.

Design of stiffened plates with openings

The load-deflection and ultimate strength behaviour of longitudinally stiffened plates with openings was studied using a second-order elastic post-buckling analysis and a rigid-plastic analysis. The ultimate strength was predicted from the intersection point of elastic and rigid-plastic curves and the Perry strut formula. Comparison with experimental results shows that satisfactory prediction of ultimate strength can be obtained by this simple method. Effects of the size of opening, the initial geometrical imperfections and the plate slenderness ratio on the strength of perforated stiffened plates were also studied.

Breaking the DNA-vaccine bottleneck

Monash University in Australia has developed a new approach towards DNA vaccine development that has the potential to cut the time it takes to produce a vaccine from up to nine months to four weeks or less. The university has designed and filed a patent on a commercially viable, single-stage technology for manufacturing DNA molecules. The technology was used to produce malaria and measles DNA vaccines, which were tested to be homogeneous supercoiled DNA, free from RNA and protein contaminations and meeting FDA regulatory standards for DNA vaccines. The technique is based on customized, smart, polymeric, monolithic adsorbents that can purify DNA very rapidly. The design criteria of solid-phase adsorbent include rapid adsorption and desorption kinetics, physical composition, and adequate selectivity , capacity and recovery. The new show technology significantly improved binding capacities, higher recovery, drastically reduced use of buffers and processing time, less clogging, and higher yields of DNA.

Using DNA as a drug - bioprocessing and delivery strategies

DNA may take a leading role in a future generation of blockbuster therapeutics. DNA has inherent advantages over other biomolecules such as protein, RNA and virus-like particles including safety, production simplicity and higher stability at ambient temperatures. Vaccination is the principal measure for preventing influenza and reducing the impact of pandemics; however, vaccines take up to 8-9 months to produce, and the global production capacity is woefully low. With production times as short as 2 weeks, improved safety and stability, bioprocess engineering developments, and the ability to perform numerous therapeutic roles, DNA has the potential to meet the demands of emerging and existing diseases. DNA is experiencing sharp growths in demand as indicated by its use in gene therapy trials and DNA vaccine related patents. Of particular interest for therapeutic use is plasmid DNA (pDNA), a form of non-genomic DNA that makes use of cellular machinery to express proteins or antigens. The production stages of fermentation and downstream purification are considered in this article. Forward looking approaches to purifying and delivering DNA are reported, including affinity chromatography and nasal inhalation. The place that pDNA may take in the preparation for and protection against pandemics is considered. If DNA therapeutics and vaccines prove to be effective, the ultimate scale of production will be huge which shall require associated bioprocess engineering research and development for purification of this large, unique biomolecule.

Creation of protein loaded biodegradable microparticles via ultrasonic atomization suitable for nasal delivery

Improved biopharmaceutical delivery may be achieved via the use of biodegradable microspheres as delivery vehicles. Biodegradable microspheres offer the advantages of maintaining sustained protein release over time whilst simultaneously protecting the biopharmaceutical from degradation. Particle samples produced by ultrasonic atomization were studied in order to determine a feed stock capable of producing protein loaded poly-ε-caprolactone (PCL) particles suitable for nasal delivery (i.e., less than 20 μm). A 40 kHz atomization system was used with a 6 mm full wave atomization probe. The effect of solids percent, feed flow rate, volumetric ratio of the polymer stock to the protein stock, and protein concentration in the protein stock on particle size characteristics were determined. It was shown that feed stocks containing 100 parts of 0.5 or 1.0% w/v PCL in acetone with one part 100 mg ml -1 BSA and 15 mg ml -1 PVA produced particles with a mass moment diameter (D[4,3]) of 13.17 μm and 9.10 μm, respectively in addition to displaying high protein encapsulation efficiencies of 93 and 95%, respectively. The biodegradable PCL particles were shown to be able to deliver encapsulated protein in vitro under physiological conditions.

Reframe QUT's evaluation framework : a case study of planning, policy and positioning leading to educational best practice

Every university in Australia has a set of policies that guide the institution in its educational practices, however, the policies are often developed in isolation to each other. Now imagine a space where policies are evidence-based, refined annually, cohesively interrelated, and meet stakeholders’ needs. Is this happenstance or the result of good planning? Culturally, Queensland University of Technology (QUT) is a risk-averse institution that takes pride in its financial solvency and is always keen to know “how are we going?” With a twenty-year history of annual reporting that assures the quality of course performance through multiple lines of evidence, QUT’s Learning and Teaching Unit went one step further and strategically aligned a suite of policies that take into consideration the needs of their stakeholders, collaborate with other areas across the institution and use multiple lines of evidence to inform curriculum decision-making. In QUT’s experience, strategic planning can lead to policy that is designed to meet stakeholders’ needs, not manage them; where decision-making is supported by evidence, not rhetoric; where all feedback is incorporated, not ignored; and where policies are cohesively interrelated, not isolated. While many may call this ‘policy nirvana’, QUT has positioned itself to demonstrate good educational practice through Reframe, its evaluation framework. In this case, best practice was achieved through the application of a theory of change and a design-led logic model that allows for transition to other institutions with different cultural specificity. The evaluation approach follows Seldin’s (2003) notion to offer depth and breadth to the evaluation framework along with Berk’s (2005) concept of multiple lines of evidence. In summary, this paper offers university executives, academics, planning and quality staff an opportunity to understand the critical steps that lead to strategic planning and design of evidence-based educational policy that positions a university for best practice in learning and teaching.

Some of the design considerations in power generation from offshore wind farms

The global efforts to reduce carbon emissions from power generation have favoured renewable energy resources such as wind and solar in recent years. The generation of power from the renewable energy resources has become attractive because of various incentives provided by government policies supporting green power. Among the various available renewable energy resources, the power generation from wind has seen tremendous growth in the last decade. This article discusses various advantages of the upcoming offshore wind technology and associated considerations related to their construction. The conventional configuration of the offshore wind farm is based on the alternative current internal links. With the recent advances of improved commercialised converters, voltage source converters based high voltage direct current link for offshore wind farms is gaining popularity. The planning and construction phases of offshore wind farms, including related environmental issues, are discussed here.

Teaching dispute resolution in the first year for law student well-being

At the QUT Law School, the most recent curriculum review responded to an increasing demand from the profession for law graduates to be equipped with dispute resolution knowledge, skills and attitudes. From 2015, a compulsory dispute resolution subject will be a critical part of an intentionally designed core first year curriculum. It is important for the Law School at QUT that no graduate of the new curriculum will leave our institution without real world dispute resolution knowledge and skills. This initiative is also grounded in evidenced-based research about the benefits for student well-being that derive from the subject content and pedagogy of dispute resolution. This paper explains why teaching dispute resolution in the first year of the law degree is an important strategy for promoting the well-being of law students.

ICT in teacher education in the age of AITSL

This paper is drawn from a 2012-2013 OLT National Teaching Fellowship investigating the agencies impacting on whole-of course curriculum design in initial teacher education. The chief of these is AITSL (Australian Institute for Teaching and School Leadership) through the Australian Professional Standards for Teachers at Graduate level and the Program Accreditation Standards. This paper will begin with a discussion of the requirements on both beginning teachers and initial teacher education programs in regard to ICT (both content and pedagogy). It will then present case studies from four universities whose degree programs have been approved for implementation in 2014. It will focus on how each institution has responded to the APST as well as accreditation requirements. This will be based on responses to surveys to selected institutions and with one on one interviews to capture rich data. From this, it will draw a contemporary profile of how institutions are rising to the real requirements of ICT pedagogy within the regulatory constraints now in place. The methodology employed is qualitative and is based on document analysis enriched by interview data. It is important to know, as a profession, how future teachers are being introduced to and immersed in digital learning environments.

Illuminative evaluation as a method applied to Australian Government policy borrowing and implementation in higher education

Any government deciding to invoke widespread change in its higher education sector through implementation of new policies impacts on every institution and all staff and students, often in both the time taken up and the heightened emotions caused. The central phenomenon that this study addresses is the process and consequences of policy changes in higher education in Australia. The aim of this article is to record the research design through the perspective (evaluation research), theoretical framework (program evaluation) and methods (content analysis, descriptive statistical analysis and bibliometric analysis) applied to the investigation of the 2003 federal government higher education reform package. This approach allows both the intended and unintended consequences arising from the policy implementation of three national initiatives focused on learning and teaching in higher education in Australia to surface. As a result, this program evaluation, also known in some disciplines as policy implementation analysis, will demonstrate the applicability of illuminative evaluation as a methodology and reinforce how program evaluation will assist and advise future government reform and policy implementation, and will serve as a legacy for future evaluative research.Any government deciding to invoke widespread change in its higher education sector through implementation of new policies impacts on every institution and all staff and students, often in both the time taken up and the heightened emotions caused. The central phenomenon that this study addresses is the process and consequences of policy changes in higher education in Australia. The aim of this article is to record the research design through the perspective (evaluation research), theoretical framework (program evaluation) and methods (content analysis, descriptive statistical analysis and bibliometric analysis) applied to the investigation of the 2003 federal government higher education reform package. This approach allows both the intended and unintended consequences arising from the policy implementation of three national initiatives focused on learning and teaching in higher education in Australia to surface. As a result, this program evaluation, also known in some disciplines as policy implementation analysis, will demonstrate the applicability of illuminative evaluation as a methodology and reinforce how program evaluation will assist and advise future government reform and policy implementation, and will serve as a legacy for future evaluative research.

A method for optimal fit of patient-specific fracture fixation plates

Anatomically pre-contoured fracture fixation plates are a treatment option for bone fractures. A well-fitting plate can be used as a tool for anatomical reduction of the fractured bone. However, recent studies showed that some plates fit poorly for many patients due to considerable shape variations between bones of the same anatomical site. Therefore, the plates have to be manually fitted and deformed by surgeons to fit each patient optimally. The process is time-intensive and labor-intensive, and could lead to adverse clinical implications such as wound infection or plate failure. This paper proposes a new iterative method to simulate the patient-specific deformation of an optimally fitting plate for pre-operative planning purposes. We further demonstrate the validation of the method through a case study. The proposed method involves the integration of four commercially available software tools, Matlab, Rapidform2006, SolidWorks, and ANSYS, each performing specific tasks to obtain a plate shape that fits optimally for an individual tibia and is mechanically safe. A typical challenge when crossing multiple platforms is to ensure correct data transfer. We present an example of the implementation of the proposed method to demonstrate successful data transfer between the four platforms and the feasibility of the method.

Co-creating stories in social learning systems : The role of community media and cultural organisations in disseminating knowledge

This paper investigates how community based media organisations are co-creative storytelling institutions, and how they learn to disseminate knowledge in a social learning system. Organisations involved in story co-creation are learning to create in fluid environments.They are project based, with a constant turnover of volunteers or staff. These organisations have to meet the needs of their funding bodies and their communities to remain sustainable. Learning is seen as dialogical, and this is also reflected in the nature of storytelling itself. These organisations must learn to meet the needs of their communities, who in turn learn from the organisation’s expertise in a facilitated setting. This learning is participatory and collaborative, and is often a mix of virtual and offline interaction. Such community-based organisations sit in the realm of a hybrid-learning environment; they are neither a formal educational institution like a college, nor do their volunteers produce outcomes in a professional capacity. Yet, they must maintain a certain level of quality outcomes from their contributors to be of continued value in their communities. Drawing from a larger research study, one particular example is that of the CitizenJ project. CitizenJ is hosted by a state cultural centre, and partnered with publishing partners in the community broadcasting sector. This paper explores how this project is a Community of Practice, and how it promotes ethical and best practice, meets contributors’ needs, emphasises the importance of facilitation in achieving quality outcomes, and the creation of projects for wider community and public interest.

Intelligent collision avoidance, control and guidance

This paper reviews a variety of advanced signal processing algorithms that have been developed at the University of Southampton as part of the Prometheus (Programme for European traffic flow with highest efficiency and unprecedented safety) programme to achieve an intelligent driver warning system (IDWS). The IDWS includes the detection of road edges, lanes, obstacles and their tracking and identification, estimates of time to collision, and behavioural modelling of drivers for a variety of scenarios. The underlying algorithms are briefly discussed in support of the IDWS.

A neurofuzzy approach to future intelligent driver support systems

This paper reviews a variety of advanced signal processing algorithms that have been developed at the University of Southampton as part of the Prometheus (PROgraMme for European Traffic flow with Highest Efficiency and Unprecedented Safety) research programme to achieve an intelligent driver warning system (IDWS). The IDWS includes: visual detection of both generic obstacles and other vehicles, together with their tracking and identification, estimates of time to collision and behavioural modelling of drivers for a variety of scenarios. These application areas are used to show the applicability of neurofuzzy techniques to the wide range of problems required to support an IDWS, and for future fully autonomous vehicles.