novel reactive distillation process for the production of cyclohexanol from cyclohexene

Magdeburg, Univ., Fak. für Verfahrens- und Systemtechnik, Diss., 2010

Estudo comparativo entre silagem de milho e cana taquara na alimentação suplementar de vacas leiteiras

The A. A. compare corn silage (Zea mays L.) with sugar cane (Saccharum sinensis Roxb.) in the supplementary feeding of dairy cow. Both the feeds were studied in relation to the following points: composition and nutritive value; influence of milk production, milk fat, milk acidity and body weight; cost of production. Both corn silage and sugar cane were analysed by ordinary methods, and their digestibility was determined by means of digestibility coefficients; their composition and nutritive value are, practically, equivalent, but silage showed slight superiority. The feeding experiment was carried out with two groups of six Holstein Friesian cows each, of the Escola Superior de Agricultura "Luiz de Queiroz" herd. Both groups were fed with the same basic concentrates mixture, calculeted according to MORRISON. During the various periods of the experiment, only the roughage supplement varied. The supplementary feeding consisted of 15 kg of chopped sugar cane or corn, silage, per day and per cow, given in two daily meals in the barn. At 4,30 p.m., the cows are set free in the field, where they pass the over night. The experiment was divided into six periods, in which there was a gradative change of the supplementary feeding between the two groups. The milk was weighed every day; the analysis of milk fat and acidity and the weighing of the animals, were made only on the first three days of every week. The analysis of data showed that: a) Milk production was increased significantly by silage feeding; b) The ri was not any influence on milk fat; c) The silage caused higher milk acidity; d) The sugar cane gave a greater increase of body weight. The cost of production of corn silage was 2,12 time higher, than sugar cane, hence, although the silage gave a higher milk production, its use is not economical, compared with sugar cane, in our conditions.

Adubação do milho: estudo comparativo sobre a colocação da mistura de adubos nos sulcos de semeadura e em sulcos laterais ao sulco de semeadura

The results reported in this paper did not show statistical differences in production of seeds, number of plants and number of ears when corn fertilizer (combination of Chilean nitrate, superphosphate and potassium chloride) was applied either in the sowing furrow or in lateral furrows (one or both side). The treatments with fertilizer were better than the treatment without fertilizer used for comparisons. Cotton seed meal, used in combination with superphosphate and potassium chloride, placed in the sowing furrow, reduces statistically the number of plants in the row when compared with the treatments where applications were made only in lateral furrows. However, this reduction of plants did not affect significantly the number of ears and the production in the treatments.

Design and control of combined chemical processes for the production of pure enantiomers

Magdeburg, Univ., Fak. für Elektrotechnik und Informationstechnik, Diss., 2013

O problema técnico-econômico da adubação

The authors discuss from the economic point of view the use of a few functions intended to represent the yield y corresponding to a level xof the nutrient. They point out that under conditions of scarce capital what is actually most important is not to obtain the highest profit per hectare but the highest return per cruzeiro spent, so that we should maximize the function z = _R - C_ = _R_ - 1 , C C where R is the gross income and C the cost of production (fixed plus variable, both per hectare). Being C = M + rx, with r the unit price of the nutrient and Af the fixed cost of the crop, wo are led to the equation (M + rx)R' - rR = 0. With R = k + sx + tx², this gives a solution Xo = - Mt - √ M²t² - r t(Ms - Kr)- _____________________ rt on the other hand, with R = PyA [1 - 10-c(x + b)], x0 will be the root of equation (M + rx)cL 10 + r 10c(x + b) = 0 (12). Another solution, pointed out by PESEK and HEADY, is to maximize the function z = sx + tx² _________ m + rx where the numerator is the additional income due to the nutrient, and m is the fixed cost of fertilization. This leads to a solution x+ = - mt - √m²t² - mrst (13) _________________ rt However, we must have x+< _r_-_s_ I if we want to satisfy t _dy_ > r. dx This condition is satisfied only if we have m < _(s__-__r)² (14), - 4 t a restriction apparently not perceived by PESEK and HEADY. A similar reasoning using Mitscherlich's law leads to equation (mcL 10 + r) + cr(L 10)x - r 10cx = 0 (15), with a similar restriction. As an example, data of VIEGAS referring to fertilization of corn (maize) gave the equation y - 1534 + 22.99 x - 0. 1069 x², with x in kg/ha of the cereal. With the prices of Cr$ 5.00 per kilo of maize, Cr$ 26.00 per kilo of P2O3,. and M = Cr$ 5,000.00, we obtain x0 = 61 kg/ha of P(2)0(5). A similar reasoning using Mitscherlich's law leads to x0 = 53 kg/ha. Now, if we take in account only the fixed cost of fertilization m = Cr$ 600.00 per hectare, we obtain from (13) x+ = 51 kg/ha of P2O5, while (14) gives x+ - 41 kg/ha. Note that if m = Cr$ 5,000.00, we obtain by formula (13) x+ = 88 kg/ha of P2O5, a solution which is not valid, since condition (14) is not satisfied.

Advanced production systems : developing context-oriented method and adaptation capabilities for enhanced supply network

Magdeburg, Univ., Fak. für Maschinenbau, Diss., 2014

Characterization of the avian designer cells AGE1.CR and AGE1.CR.plX considering growth, metabolism and production of influenza virus and Modified Vaccinia Virus Ankara (MVA)

Magdeburg, Univ., Fak. für Verfahrens- und Systemtechnik, Diss., 2014

Population balance modeling of influenza A virus replication in MDCK cells during vaccine production

Magdeburg, Univ., Fak. für Elektrotechnik und Informationstechnik, Diss., 2015

Conceptual Foundations of Modelling of Innovative Production Projects

At the moment there is a lack of methodological approaches to formalization of management of innovative projects relating to production systems, as well as to adaptation and practical use of the existing approaches. This article is about one potential approach to the management of innovative projects, which makes the building of innovative process models possible based on objective approach. It outlines the frameworks for the building of innovative project models, and describes the method of transition from conceptual modelling to innovative project management. In this case, the model alone and together with parameters used for evaluation of the project may be unique and depends on the special features of the project, preferences of decision-making person, and production and economic system in which it is to be implemented. Unlike existing approaches, this concept does not place any restrictions on types of models and makes it possible to take into account the specificities of economic and production systems. Principles embodied in the model allow its usage as a basis for simulation model to be used in one of specialized simulation systems, as well as for information system providing information support of decision-making process in production and economic systems both newly developed by the company (enterprise) and designed on the basis of available information systems that interact through the exchange of data. In addition, this article shows that the development of conceptual foundations of innovative project management in the economic and production systems is inseparable from the development of the theory of industrial control systems, and their comprehensive study may be reduced to a set of elements represented as certain algorithms, models and evaluations. Thus, the study of innovative process may be conducted in both directions: from general to particular, and vice versa.

Nonlinear dynamics of Poly(hydroxyalkanoate) production in Ralstonia eutropha and Rhodospirillum rubrum

Magdeburg, Univ., Fak. für Elektrotechnik und Informationstechnik, Diss., 2015

Production and quality of cotton fibers in relation to solar radiation

The present paper refers to a research work carried out at the Dept. of Agriculture and Horticulture of ESALQ, University of São Paulo, in Piracicaba, State of São Paulo (latitude 22º42'S, longitude 47º33' WG and altitude 546 m). Sowing at different times and using artificial cover, an attempt was made to evaluate the behavior of cultivar IAC 17 of cotton (Gossypium hirsutum L.) as to production and quality of fiber relating to incident solar radiation. Incident solar radiation, as well as insolation during the trial period, were tabulated and compared with yelds and agricultural and technological characters of fibers. The treatment under cover showed a mean level of incident solar radiation equivalent to less than 20% of that at clear sky, causing a decrease in cotton production and in the agricultural and technological characters of fibers.

Action of growth regulators on flowering and pod production of soybean cultivar Davis

This research deals with the effects of growth regulators on flowering and pod formation in soybean plant (Glycine max cv. Davis). Under greenhouse conditions, soybean plants were sprayed with 2,3,5-triiodobenzoic acid (TIBA) 20 ppm, Agrostemmin (1g/10 ml/3 l) gibberellic acid (GA) 100 ppm, and (2-chloroethyl) trimethylammonium chloride (CCC) 2,000 ppm. Application of TIBA increased number of flowers. 'Davis' soybean treated with CCC and TIBA presented a tendency to produce a lower number of pods.

Action of growth regulators on production of soybean cultivar Davis

This research deals with the effects of exogenous growth regulators on production of soybean plant (Glycine max cv.. Davis) under greenhouse conditions, At the flower anthesis, 2,3,5-triiodobenzoic acid (TIBA) 20 ppm was applied. Other two applications with TiBA, with intervals of four days, were realized. Before flowering, Agrostemin (1 g/10 ml/3 1), gibberellic acid (GA) 100 ppm, and (2-chloroethyl) trimethylammonium chloride (CCC) 2,000 ppm were applied. It was observed that CCC and TIBA reduced stem dry weight. Soybean plants treated with TIBA reduced weight of pods without seeds , seed number and seed weight.

Doses and methods of distribution of potassium chloride on soybean crop (Glycine max (L.) Merrill) in a red latosol, affecting soil salinity, grain production and chemical composition of leaves

The present work deal t wi th an experiment under field conditions and a laboratory test of soil incubation the objectives were as follows: a. to study effects on soybean grain product ion and leaf composition of increasing doses of potassium chloride applied into the soil through two methods of distribution; b. to observe chemical modifications in the soils incubated with increasing doses of potassium chloride; and, c. to correlate field effects with chemical alterations observed in the incubation test, The field experiment was carried out in a Red Latosol (Haplustox) with soybean cultivar UFV - 1. Potassium chloride was distributed through two methods: banded (5 cm below and 5 cm aside of the seed line) and broadcasted and plowed-down. Doses used were: 0; 50; 100 and 200 kg/ha of K2O. Foliar samples were taken at flowering stage. Incubation test were made in plastic bags with 2 kg of air dried fine soil, taken from the arable layer of the field experiment, with the following doses of KC1 p,a. : 0; 50; 100; 200; 400; 800; 1,600; 3.200; 6,400 and 12,800 kg/ha of K(2)0. In the conditions observed during the present work, results allowed the following conclusions: A response by soybean grain production for doses of potassium chloride, applied in both ways, banded or broadcasted, was not observed. Leaf analysis did not show treatment influence over the leaf contents for N, P, K, Ca, Mg, and CI, Potassium chloride salinity effects in both methods of distribution for all the tested closes were not observed.

Effects of planting density on flower production in carnation crop

The influence of density of planting on flower production of carnation plants grown in vinil houses, was studied. Planting densities of 233,333; 175,000 and 116,667 plants per hectare were obtained by using planting spacings of 0.20 m between rows and 0.15 m, 0,20 m and 0.30 m between plants. Data were taken on total number of flowers per plant and per hectare. As far as planting densities are concerned, there was an increase of total flower production per hectare and a decrease of slower production per plant.