Gasification and pyrolysis of Posidonia oceanica in the presence of dolomite

In the present work, a very detailed study of the reforming of syngas produced in the decomposition of Posidonia oceanica is done. The effect of the presence of different amounts of dolomite is analyzed. Also pyrolysis is studied, in nitrogen atmosphere, and gasification in the presence of air, oxygen and different amounts of steam. A detailed discussion on formation and destruction of tars is done. Furthermore, the effect of the heating rate in the decomposition and the residence time of the evolved gases are discussed. Syngas with ratio H2/CO from 0.3 to ca. 3 can be obtained from this interesting material. Marine species (microalgae) are usually studied with the aim of cultivating them for gas or oil production, but in this paper we draw attention to the possibility of using a natural resource with a very small impact in the ecosystem.

Activated Carbon Fibre Monoliths for Hydrogen Storage

Porous adsorbents are currently investigated for hydrogen storage application. From a practical point of view, in addition to high porosity developments, high material densities are required, in order to confine as much material as possible in a tank device. In this study, we use different measured sample densities (tap, packing, compacted and monolith) for analyzing the hydrogen adsorption behavior of activated carbon fibres (ACFs) and activated carbon nanofibres (ACNFs) which were prepared by KOH and CO2 activations, respectively. Hydrogen adsorption isotherms are measured for all of the adsorbents at room temperature and under high pressures (up to 20 MPa). The obtained results confirm that (i) gravimetric H2 adsorption is directly related to the porosity of the adsorbent, (ii) volumetric H2 adsorption depends on the adsorbent porosity and importantly also on the material density, (iii) the density of the adsorbent can be improved by packing the original adsorbents under mechanical pressure or synthesizing monoliths from them, (iv) both ways (packing under pressure or preparing monoliths) considerably improve the storage capacity of the starting adsorbents, and (v) the preparation of monoliths, in addition to avoid engineering constrains of packing under mechanical pressure, has the advantage of providing high mechanical resistance and easy handling of the adsorbent.

Methane dry reforming over Ni supported on pine sawdust activated carbon: Effects of support surface properties and metal loading

The influence of metal loading and support surface functional groups (SFG) on methane dry reforming (MDR) over Ni catalysts supported on pine-sawdust derived activated carbon were studied. Using pine sawdust as the catalyst support precursor, the smallest variety and lowest concentration of SFG led to best Ni dispersion and highest catalytic activity, which increased with Ni loading up to 3 Ni atoms nm-2. At higher Ni loading, the formation of large metal aggregates was observed, consistent with a lower "apparen" surface area and a decrease in catalytic activity. The H2/CO ratio rose with increasing reaction temperature, indicating that increasingly important side reactions were taking place in addition to MDR.

Gasification and Pyrolysis of Posidonia oceanica in the Presence of Dolomite

Resumen del póster presentado en Symposium on Renewable Energy and Products from Biomass and Waste, CIUDEN (Cubillos de Sil, León, Spain), 12-13 May 2015

Promoter effect of sodium in graphene-supported Ni and Ni–CeO2 catalyst for the low-temperature WGS reaction

The low temperature water–gas shift (WGS) reaction has been studied over Ni–CeO2/Graphene and Ni/Graphene. The catalysts were prepared with 5 wt.% Ni and 20 wt.% CeO2 loadings, by deposition-precipitation employing sodium hydroxide and urea as precipitating agents. The materials were characterized by TEM, powder X-ray diffraction, Raman spectroscopy, H2-temperature-programmed reduction and X-ray photoelectron spectroscopy (XPS). The characterization and the reaction results indicated that the interaction between the active species and the support is higher than with activated carbon, and this hinders the reducibility of ceria and thus the catalytic performance. On the other hand, the presence of residual sodium in samples prepared by precipitation with NaOH facilitated the reduction of ceria. The catalytic activity was highly improved in the presence of sodium, what can be explained on the basis of an associative reaction mechanism which is favored over Ni-O-Na entities.

Hydrogen Production by Steam Reforming of Ethanol on Rh-Pt Catalysts: Influence of CeO2, ZrO2, and La2O3 as Supports

CeO2-, ZrO2-, and La2O3-supported Rh-Pt catalysts were tested to assess their ability to catalyze the steam reforming of ethanol (SRE) for H2 production. SRE activity tests were performed using EtOH:H2O:N2 (molar ratio 1:3:51) at a gaseous space velocity of 70,600 h−1 between 400 and 700 °C at atmospheric pressure. The SRE stability of the catalysts was tested at 700 °C for 27 h time on stream under the same conditions. RhPt/CeO2, which showed the best performance in the stability test, also produced the highest H2 yield above 600 °C, followed by RhPt/La2O3 and RhPt/ZrO2. The fresh and aged catalysts were characterized by TEM, XPS, and TGA. The higher H2 selectivity of RhPt/CeO2 was ascribed to the formation of small (~5 nm) and stable particles probably consistent of Rh-Pt alloys with a Pt surface enrichment. Both metals were oxidized and acted as an almost constant active phase during the stability test owing to strong metal-support interactions, as well as the superior oxygen mobility of the support. The TGA results confirmed the absence of carbonaceous residues in all the aged catalysts.

Photogeneration of Hydrogen from Water by Hybrid Molybdenum Sulfide Clusters Immobilized on Titania

Two new hybrid molybdenum(IV) Mo3S7 cluster complexes derivatized with diimino ligands have been prepared by replacement of the two bromine atoms of [Mo3S7Br6]2− by a substituted bipyridine ligand to afford heteroleptic molybdenum(IV) Mo3S7Br4(diimino) complexes. Adsorption of the Mo3S7 cores from sample solutions on TiO2 was only achieved from the diimino functionalized clusters. The adsorbed Mo3S7 units were reduced on the TiO2 surface to generate an electrocatalyst that reduces the overpotential for the H2 evolution reaction by approximately 0.3 V (for 1 mA cm−2) with a turnover frequency as high as 1.4 s−1. The nature of the actual active molybdenum sulfide species has been investigated by X-ray photoelectron spectroscopy. In agreement with the electrochemical results, the modified TiO2 nanoparticles show a high photocatalytic activity for H2 production in the presence of Na2S/Na2SO3 as a sacrificial electron donor system.

Potential of Cu–saponite catalysts for soot combustion

H– and Na–saponite supports have been prepared by several synthesis approaches. 5% Cu/saponite catalysts have been prepared and tested for soot combustion in a NOx + O2 + N2 gas flow and with soot and catalyst mixed in loose contact mode. XRD, FT-IR, N2 adsorption and TEM characterization results revealed that the use of either surfactant or microwaves during the synthesis led to delamination of the saponite support, yielding high surface area and small crystallite size materials. The degree of delamination affected further copper oxide dispersion and soot combustion capacity of the Cu/saponite catalysts. All Cu/saponite catalysts were active for soot combustion, and the NO2-assisted mechanism seemed to prevail. The best activity was achieved with copper oxide supported on a Na–saponite prepared at pH 13 and with surfactant. This best activity was attributed to the efficient copper oxide dispersion on the high surface area delaminated saponite (603 m2 g−1) and to the presence of Na. Copper oxide reduction in H2-TPR experiments occurred at lower temperature for the Na-containing catalysts than for the H-containing counterparts, and all Cu/Na–saponite catalysts were more active for soot combustion than the corresponding Cu/H–saponite catalysts.

Carbon nanotube-supported Ni–CeO2 catalysts. Effect of the support on the catalytic performance in the low-temperature WGS reaction

The low temperature water-gas shift (WGS) reaction has been studied over two commercial multiwall carbon nanotubes-supported nickel catalysts promoted by ceria. For comparison purposes, activated carbon-supported catalysts have also been studied. The catalytic performance and the characterization by N2 adsorption analysis, powder X-ray diffraction (XRD), temperature-programmed reduction with H2 (TPR-H2), X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM) analysis showed that the surface chemistry has an important effect on the dispersion of ceria. As a result, ceria was successfully dispersed over the carbon nanotubes (CNTs) with less graphitic character, and the catalyst afforded better activity in WGS than the catalyst prepared over massive ceria. Moreover, a 20 wt.% CeO2 loading over this support was more active than the analogous catalyst with a 40 wt.% loading. The ceria nanoparticles were smaller when the support was previously oxidized, however this resulted in a decrease of the activity.

NOx storage and reduction over copper-based catalysts. Part 2: Ce0.8M0.2Oδ supports (M = Zr, La, Ce, Pr or Nd)

5% copper catalysts with Ce0.8M0.2Oδ supports (M = Zr, La, Ce, Pr or Nd) have been studied by rapid-scan operando DRIFTS for NOx Storage and Reduction (NSR) with high frequency (30 s) CO, H2 and 50%CO + 50%H2 micropulses. In the absence of reductant pulses, below 200–250 °C NOx was stored on the catalysts as nitrite and nitro groups, and above this temperature nitrates were the main species identified. The thermal stability of the NOx species stored on the catalysts depended on the acid/basic character of the dopant (M more acidic = NOx stored less stable ⇒ Zr4+ < none < Nd3+ < Pr3+ < La3+ ⇐ M more basic = NOx stored more stable). Catalysts regeneration was more efficient with H2 than with CO, and the CO + H2 mixture presented an intermediate behavior, but with smaller differences among the series of catalyst than observed using CO alone. N2 is the main NOx reduction product upon H2 regeneration. The highest NOx removal in NSR experiments performed at 400 °C with CO + H2 pulses was achieved with the catalyst with the most basic dopant (CuO/Ce0.8La0.2Oδ) while the poorest performing catalyst was that with the most acidic dopant (CuO/Ce0.8Zr0.2Oδ). The poor performance of CuO/Ce0.8Zr0.2Oδ in NSR experiments with CO pulses was attributed to its lower oxidation capacity compared to the other catalysts.

Síntesis y caracterización de Materiales Nanoscópicos y Nano-especies activas y sus aplicaciones en Energía y Medio Ambiente

Se estudiara la síntesis, caracterización y aplicación de Materiales Nanoscópicos (Nanoestructurados, MN y Nanocomposites, NC), con propiedades definidas en el campo de la Energía, Medio Ambiente y Bioingeniería, especialmente las MCM y SBA ( MCM-41 y MCM-48, SBA-1, SBA-3, SBA-15 y SBA-16, Silíceas o Al/Ga/Ti como Heteroátomo, y la Al-SBA-3, recientemente desarrollada por nosotros, primera publicación a nivel mundial). Se pondrá énfasis en el diseño, preparación y caracterización de sus réplicas con C (CMK-1 y CMK-3). Determinación y optimización de las estrategias de síntesis de MN y NC y Nano especies Activas en nuevos catalizadores (Ir/ TiO2, Pt/Pd etc.), cuyas propiedades fundamentales (estructurales, electrónicas, conductividad, actividad catalítica, etc.) sean aplicables en los Campos Citados. Comprensión de los parámetros que definen dichas propiedades, relación estructura/actividad, rediseño y aplicaciones de MN y NC en dos procesos específicos (de los cuales ya hemos publicado resultados): Energía y Medioambiente: 1) Almacenamiento de H2, Adsorción/Absorción de H2 en los MN Silíceos y Carbonosos y NC y Desarrollo de NC híbridos formados por reservorios en base a los MN por oclusión de nano-alambres moleculares de polímeros orgánicos, modificando las propiedades de conductividad / semiconductividad y adsorción de H2; 2) Estudio de las reacciones de hidrotratamiento catalítico (HDT), que comprende la hidrogenación, la hidrodesulfurizacion (HDS) y la hidrodenitrogenacion (HDN) de compuestos refractarios presentes en los cortes de combustibles. La determinación del mecanismo de las reacciones de HDS y HDN.

El Conde Lucanor / compuesto por el excelentissimo principe don Iuan Manuel hiio del infante don Manuel y nieto del sancto rey don Fernando ; dirigido por Gonçalo de Argote y de Molina ...

Gonzalo Argote y de Molina es el ed. literario de la obra y sus propios escritos constan al v. de port. : Epistola dedicatoria ; Discurso al ... lector ; Vida de don Iuan Manuel ; Succession y linage de don Iuan Manuel ; Discurso de la poesia antigua Ca

Le sentiment d'appartenance à l'école : un regard conceptuel, psychométrique et théorique

Parce qu’il est notamment lié à des facteurs de réussite scolaire et d’adaptation sociale (Eccles & Roeser, 2009; Finn, 1989; Janosz, Georges, & Parent, 1998), le sentiment d’appartenance des élèves est considéré comme étant un élément de première instance qui doit d’être développé et maintenu par les professionnels de l’éducation (MELS, 2012). L'objectif général visait à approfondir notre compréhension du sentiment d’appartenance à l’école. Pour répondre à cet objectif général, trois articles de recherche distincts ont été élaborés. Le premier article présente une analyse conceptuelle visant à clarifier la compréhension du concept de sentiment d’appartenance à l’école. La méthode conceptuelle privilégiée dans cet article est celle de Walker et Avant (2011). La recension des écrits et les référents empiriques répertoriés indiquent que ce concept est de nature multidimensionnelle. L’analyse des données indique quatre attributs définitionnels. L’élève doit : (1) ressentir une émotion positive à l’égard du milieu scolaire; (2) entretenir des relations sociales de qualité avec les membres du milieu scolaire; (3) s’impliquer activement dans les activités de la classe ou celles de l’école; (4) percevoir une certaine synergie (harmonisation), voir même une similarité, avec les membres de son groupe. À la suite de cette étude permettant de mieux comprendre le sentiment d’appartenance à l’école, le deuxième article visait à examiner la structure factorielle et l'invariance de l’instrument de mesure du sentiment d’appartenance Psychological Sense of School Membership (PSSM) au regard du sexe des élèves. Cette étude a été menée chez un échantillon composé de 766 filles et de 391 garçons de troisième secondaire. Les analyses factorielles confirmatoires ont indiqué une structure à trois facteurs : (1) la qualité des relations entre les élèves; (2) la qualité des relations entre les élèves et l’enseignant; ainsi que (3) le sentiment d’acceptation par le milieu. Les analyses factorielles multigroupes ont indiqué pour leur part que le PSSM est un instrument invariant chez les filles et les garçons de troisième secondaire. Finalement, le troisième article a été mené chez un échantillon de 4166 élèves de niveau secondaire afin d’examiner les processus psychologiques complexes s’opérant entre le sentiment d’appartenance et le rendement scolaire (Anderman & Freeman, 2004; Connell & et al., 1994; Roeser et al., 1996). Afin d’examiner ces processus psychologiques, quatre hypothèses issues du modèle de Freeman-Anderman ont été validées par le biais d’analyses acheminatoires : H1 Les affects positifs médiatisent partiellement et positivement l’effet du sentiment d’appartenance sur l’engagement comportemental; H2 Les affects positifs médiatisent partiellement et positivement l’effet du sentiment d’appartenance sur l’engagement affectif; H3 Les affects positifs médiatisent partiellement et positivement l’effet du sentiment d’appartenance sur l’engagement cognitif; H4 Les engagements affectif, cognitif et comportemental médiatisent partiellement et positivement l’effet du sentiment d’appartenance sur le rendement scolaire. Nos résultats appuient partiellement la première hypothèse de recherche tout en soutenant les hypothèses deux, trois et quatre. Spécifiquement, la relation entre le sentiment d’appartenance et l’engagement émotionnel montre davantage un effet direct qu’un effet indirect (H2). L’étude a produit des résultats similaires pour l’engagement cognitif (H3). Finalement, la relation entre le sentiment d’appartenance et le rendement scolaire indique un effet indirect plus grand qu’un effet direct (H4). À la lumière de ces résultats, des recommandations à l’intention des professionnels de l’éducation sont offertes en guise de conclusion.

Composition of basalts from the north part of the Bougault anomaly, Mid-Atlantic Ridge 15°N

A quantitative model of development of magmatic and ore-magmatic systems under crests of mid-ocean ridges is constructed. Correct physical models of melting zone formation in approximation to active spreading, non-stationary dynamics of magma intrusion from a center of generation, filling of magma chambers of various shapes, feeding of fissure-type volcanoes, and retrograde boiling of melts during solidification of intrusive bodies beneath axial zones of spreading in crests of ridges are proposed. Physicochemical and mathematical theories of disintegration of multi-component solutions, growth of liquational drops of ore melts, and sublimation of components from magmatic gases are elaborated. Methods for constructing physically correct models of heat and mass transfer in heterophase media are devised. Modeling of development of magmatic and ore-magmatic systems on the basis of the Usov-Kuznetsov facies method and the Pospelov system approach are advanced. For quantitative models numerical circuits are developed and numerical experiments are carried out.

Sulfur isotope rations in oceanic basement samples

Low temperature alteration of oceanic basement rocks is characterized by net gain of sulfur, which commonly yields low d34S values, suggesting involvement of microbial sulfate reduction. In order to test whether secondary sulfide minerals are consistent with a biogenic source, we apply high precision multiple sulfur isotope analysis to bulk rock sulfide and pyrite isolates from two contrasting types of altered oceanic basement rocks, namely serpentinized peridotites and altered basalts. Samples from two peridotite sites (Iberian Margin and Hess Deep) and from a basalt site on the eastern flank of the Juan de Fuca Ridge yield overlapping d34S values ranging from 0 per mil to -44 per mil. In contrast, sulfides in the basalt site are characterized by relatively low D33S values ranging from -0.06 per mil to 0.04 per mil, compared to those from peridotite sites (0.00 per mil to 0.16 per mil). The observed D33S signal is significant considering the analytical precision of 0.014 per mil (2 sigma). We present a batch reaction model that uses observed d34S and D33S relationships to quantify the effect of closed system processes and constrain the isotope enrichment factor intrinsic to sulfate reduction. The estimated enrichment factors as large as 61 per mil and 53 per mil, for peridotite and basalt sites respectively, suggest the involvement of microbial sulfate reduction. The relatively high D33S values in the peridotite sites are due to sulfate reduction in a closed system environment, whereas negative D33S values in the basalt site reflect open system sulfate reduction. A larger extent of sulfate reduction during alteration of peridotite to serpentinite is consistent with its higher H2 production capacity compared to basalt alteration, and further supports in-situ microbial sulfate reduction coupled with H2 production during serpentinization reactions.