Process Improvement in Phlebotomy

This study has two main objectives. First, the phlebotomy process at the St. Catharines Site of the Niagara Health System is investigated, which starts when an order for a blood test is placed, and ends when the specimen arrives at the lab. The performance measurement is the flow time of the process, which reflects concerns and interests of both the hospital and the patients. Three popular operational methodologies are applied to reduce the flow time and improve the process: DMAIC from Six Sigma, lean principles and simulation modeling. Potential suggestions are provided for the St. Catharines Site, which could result in an average of seven minutes reduction in the flow time. The second objective addresses the fact that these three methodologies have not been combined before in a process improvement effort. A structured framework combining them is developed to benefit future study of phlebotomy and other hospital processes.

ARMA modeling of time series based on rational approximation of spectral density function

This study is concerned with Autoregressive Moving Average (ARMA) models of time series. ARMA models form a subclass of the class of general linear models which represents stationary time series, a phenomenon encountered most often in practice by engineers, scientists and economists. It is always desirable to employ models which use parameters parsimoniously. Parsimony will be achieved by ARMA models because it has only finite number of parameters. Even though the discussion is primarily concerned with stationary time series, later we will take up the case of homogeneous non stationary time series which can be transformed to stationary time series. Time series models, obtained with the help of the present and past data is used for forecasting future values. Physical science as well as social science take benefits of forecasting models. The role of forecasting cuts across all fields of management-—finance, marketing, production, business economics, as also in signal process, communication engineering, chemical processes, electronics etc. This high applicability of time series is the motivation to this study.

Modeling Of Work-Related Musculoskeletal Disorders In Chemical Process Industry In India

In this modern complex world, stress at work is found to be increasingly a common feature in day to day life. For the same reason, job stress is one of the active areas in occupational health and safety research for over last four decades and is continuing to attract researchers in academia and industry. Job stress in process industries is of concern due to its influence on process safety, and worker‘s safety and health. Safety in process (chemical and nuclear material) industry is of paramount importance, especially in a thickly populated country like India. Stress at job is the main vector in inducing work related musculoskeletal disorders which in turn can affect the worker health and safety in process industries. In view of the above, the process industries should try to minimize the job stress in workers to ensure a safe and healthy working climate for the industry and the worker. This research is mainly aimed at assessing the influence of job stress in inducing work related musculoskeletal disorders in chemical process industries in India

Towards Grid-Wide Modeling and Simulation

Modeling and simulation permeate all areas of business, science and engineering. With the increase in the scale and complexity of simulations, large amounts of computational resources are required, and collaborative model development is needed, as multiple parties could be involved in the development process. The Grid provides a platform for coordinated resource sharing and application development and execution. In this paper, we survey existing technologies in modeling and simulation, and we focus on interoperability and composability of simulation components for both simulation development and execution. We also present our recent work on an HLA-based simulation framework on the Grid, and discuss the issues to achieve composability.

The business case development process in the delivery of NHS infrastructure

There is a lack of knowledge base in relation to experiences gained and lessons learnt from previously executed National Health Service (NHS) infrastructure projects in the UK. This is in part a feature of one-off construction projects, which typify healthcare infrastructure, and in part due to the absence of a suitable method for conveying such information. The complexity of infrastructure delivery process in the NHS makes the construction of healthcare buildings a formidable task. This is particularly the case for the NHS trusts who have little or no experience of construction projects. To facilitate understanding a most important aspect of the delivery process, which is the preparation of a capital investment proposal; steps taken in developing the business case for an NHS healthcare facility are examined. The context for such examination is provided by the planning process of a healthcare project, studied retrospectively. The process is analysed using a social science based method called ‘building stories’, developed at the University of California-Berkeley. By applying this method, stories or narratives are constructed around the data captured on the case study. The findings indicate that the business case process may be used to justify, rather than identify, trusts’ requirements. The study is useful for UK public sector clients as well as consultants and professionals who aim to participate in the delivery of healthcare infrastructure projects in the UK.

(Non-)ergodicity of a degenerate diffusion modeling the fiber lay down process

We analyze the large time behavior of a stochastic model for the lay down of fibers on a moving conveyor belt in the production process of nonwovens. It is shown that under weak conditions this degenerate diffusion process has a unique invariant distribution and is even geometrically ergodic. This generalizes results from previous works [M. Grothaus and A. Klar, SIAM J. Math. Anal., 40 (2008), pp. 968–983; J. Dolbeault et al., arXiv:1201.2156] concerning the case of a stationary conveyor belt, in which the situation of a moving conveyor belt has been left open.

Modeling growth strategy in a biotechnology startup firm

The top managers of a biotechnology startup firm agreed to participate in a system dynamics modeling project to help them think about the firm's growth strategy. The article describes how the model was created and used to stimulate debate and discussion about growth management. The paper highlights several novel features about the process used for capturing management team knowledge. A heavy emphasis was placed on mapping the operating structure of the factory and distribution channels. Qualitative modeling methods (structural diagrams, descriptive variable names, and friendly algebra) were used to capture the management team's descriptions of the business. Simulation scenarios were crafted to stimulate debate about strategic issues such as capacity allocation, capacity expansion, customer recruitment, customer retention, and market growth, and to engage the management team in using the computer to design strategic scenarios. The article concludes with comments on the impact of the project.

Design of a unified data with business rules storage model for OLTP and OLAP systems

This paper reviews the literature concerning the practice of using Online Analytical Processing (OLAP) systems to recall information stored by Online Transactional Processing (OLTP) systems. Such a review provides a basis for discussion on the need for the information that are recalled through OLAP systems to maintain the contexts of transactions with the data captured by the respective OLTP system. The paper observes an industry trend involving the use of OLTP systems to process information into data, which are then stored in databases without the business rules that were used to process information and data stored in OLTP databases without associated business rules. This includes the necessitation of a practice, whereby, sets of business rules are used to extract, cleanse, transform and load data from disparate OLTP systems into OLAP databases to support the requirements for complex reporting and analytics. These sets of business rules are usually not the same as business rules used to capture data in particular OLTP systems. The paper argues that, differences between the business rules used to interpret these same data sets, risk gaps in semantics between information captured by OLTP systems and information recalled through OLAP systems. Literature concerning the modeling of business transaction information as facts with context as part of the modelling of information systems were reviewed to identify design trends that are contributing to the design quality of OLTP and OLAP systems. The paper then argues that; the quality of OLTP and OLAP systems design has a critical dependency on the capture of facts with associated context, encoding facts with contexts into data with business rules, storage and sourcing of data with business rules, decoding data with business rules into the facts with the context and recall of facts with associated contexts. The paper proposes UBIRQ, a design model to aid the co-design of data with business rules storage for OLTP and OLAP purposes. The proposed design model provides the opportunity for the implementation and use of multi-purpose databases, and business rules stores for OLTP and OLAP systems. Such implementations would enable the use of OLTP systems to record and store data with executions of business rules, which will allow for the use of OLTP and OLAP systems to query data with business rules used to capture the data. Thereby ensuring information recalled via OLAP systems preserves the contexts of transactions as per the data captured by the respective OLTP system.

Business To Business (B2B) Service Processes: An Approach To Customer Complaint Process Evaluation Towards Service Excellence

Trabalho de Dissertação que identifica as decisões estratégicas relacionadas com a estrutura de gestão de serviços, no contexto de tratamento de reclamações. Os temas de recuperação de serviços e gestão de reclamações são discutidos e são listadas as melhores práticas com o objetivo de prover qualidade de serviço excelente. Este trabalho apresenta uma revisão da literatura sobre gestão de serviços e sua estratégia, e sobre valor aos clientes e sua satisfação. Qualidade de Serviço, Recuperação de Serviço e Gestão de Reclamações são revistos, também para contextualizar o processo de tratamento de reclamações de uma empresa do ramo industrial em ambiente de negócios entre empresas (business to business), cujos dados foram utilizados para construção do modelo de simulação de um processo de tratamento de reclamações. Os resultados desta simulação, junto com o suporte de um questionário sobre tratamento de reclamações, proveram pontos de reflexão e recomendações sobre desenho da estrutura de serviços e de seu desempenho, voltados para a satisfação dos clientes.

Business competition dynamics: agent-based modeling simulations of firms in search of economic performance

A intenção deste trabalho é explorar dinâmicas de competição por meio de “simulação baseada em agentes”. Apoiando-se em um crescente número de estudos no campo da estratégia e teoria das organizações que utilizam métodos de simulação, desenvolveu-se um modelo computacional para simular situações de competição entre empresas e observar a eficiência relativa dos métodos de busca de melhoria de desempenho teorizados. O estudo também explora possíveis explicações para a persistência de desempenho superior ou inferior das empresas, associados às condições de vantagem ou desvantagem competitiva

Growth process in business and social entrepreneurship: the case of Brazil

The purpose of the dissertation is to investigate in depth the difference between the challenges social and business entrepreneurs face in the growth phase of their business in the particular environment of Brazil. This objective has been achieved through a two-steps methodology. The first step is a set of in-depth interviews carried out with industry experts such as professors, venture capitalists, consultants, fund managers or people involved in the support of growing startups (i.e. accelerators). These interviews allowed, first, to build a general perspective on the environment entrepreneurs operate into and to identify a list of challenges entrepreneurs face in the growth process of their business. This list was completed with the additional challenges identified in the previous literature. The second step of the methodology was to test the relevance of these challenges in the mind and experience of social and traditional entrepreneurs. A questionnaire was then submitted to 145 social and 286 traditional entrepreneurs. The results were statistically analyzed to test the relative relevance of these challenges for one group of entrepreneurs with respect to the other. The outcome of the analysis was significant. The most relevant challenges identified were, for both groups, taxation, bureaucracy, finding the right employees, creating effective teams, measuring firm performance and social value creation and obtaining funds. On the other side motivation, innovation, competition and lack of market space for growth represented the least relevant issues in the minds of entrepreneurs. This rank however did not differ significantly from social to traditional entrepreneurs. This testifies that in Brazil social and traditional entrepreneurs face the same set of challenges despite the widespread belief of the opposite.

Monitoring of cure kinetic prepreg and cure cycle modeling

Cure kinetic model is an integral part of composite process simulation, which is used to predict the degree of curing and the amount of the generated heat. The parameters involved in kinetic models are usually determined empirically from isothermal or dynamic differential scanning calorimetry (DSC) data. In this work, DSC and rheological techniques were used to investigate some of the kinetic parameters of cure reactions of carbon/F161 epoxy prepreg and to evaluate the cure cycle used to manufacture polymeric composites for aeronautical applications. As a result, it was observed that the F161 prepreg presents cure kinetic with total order 1.2-1.9. (c) 2006 Springer Science + Business Media, Inc.