Structural and optical properties of brominated plasma polymers

Novel brominated amorphous hydrogenated carbon (a-C:H:Br) films were produced by the plasma polymerization of acetylene-bromoform mixtures. The main parameter of interest was the degree of bromination, which depends on the partial pressure of bromoform in the plasma feed, expressed as a percentage of the total pressure, R-B. When bromoform is present in the feed, deposition rates of up to about 110 nm min(-1) may be obtained. The structure and composition of the films were characterized by Transmission Infrared Reflection Absorption Spectroscopy (IRRAS) and X-ray Photo-electron Spectroscopy (XPS). The latter revealed that films with atomic ratios Br:C of up to 0.58 may be produced. Surface contact angles, measured using goniometry, could be increased from similar to 63 degrees (for an unbrominated film) to similar to 90 degrees for R-B of 60 to 80%. Film surface roughness, measured using a profilometer, does not depend strongly on R-B. Optical properties the refractive index, n, absorption coefficient, alpha(E), where E is the photon energy, and the optical gap, E-g, were determined from film thicknesses and data obtained by Transmission Ultraviolet-Visible Near Infrared Spectroscopy (UVS). Control of n was possible via selection of R-B. The measured optical gap increases with increasing F-BC, the atomic ratio of Br to C in the film, and semi-empirical modeling accounts for this tendency. A typical hardness of the brominated films, determined via nano-indentation, was similar to 0.5 GPa. (C), 2013 Elsevier B.V. All rights reserved.

Pretreatment of sugarcane bagasse with microwaves irradiation and its effects on the structure and on enzymatic hydrolysis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Experimental and Theoretical Investigations of Electronic Structure and Photoluminescence Properties of beta-Ag2MoO4 Microcrystals

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Structure and thermal behavior of PMMA-polysilsesquioxane organic-inorganic hybrids

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Er3+-doped Y2O3 obtained by polymeric precursor: Synthesis, structure and upconversion emission properties

The relentless pursuit for materials containing rare earth ions with photoluminescent properties has led to several studies with applications in the development of new technologies. The main focus of this work is the preparation of Er3+-doped polycrystalline Y2O3 with photoluminescent properties using PEG as an organic precursor and heat-treated at different temperatures. The methodology used in this synthesis is highly attractive due to its high feasibility for improved technology and low cost for preparing materials. The behavior of the viscous resin has been evaluated and the final compounds exhibited the formation of a cubic polycrystalline phase, which is able to support variations in Er3+ doping concentrations up to 10 mol%, without significant changes in the polycrystalline parameters. The values of the nanocrystallite size calculated by Scherrer's equation showed direct dependence on the heat-treatment temperature as well as the Er3+ concentration. Intense emission in the visible region under excitation at 980 nm was attributed to an upconversion phenomenon assigned to the intraconfigurational f-f transitions of Er3+ ions. The upconversion mechanism was investigated and it was demonstrated that the higher intense emission in the red region in comparison to the emission in the green region is related to the crystallite size. The studies about the intensity showed the dependence of upconversion emission of power source, indicating that two-photon are responsible for the green and red photoluminescence. These polycrystalline materials exhibit properties that make them promising for use in solar energy systems, C-telecom band or solid-state laser devices. (C) 2014 Elsevier B.V. All rights reserved.

Insight into the Effects of Fe Addition on the Local Structure and Electronic Properties of SrTiO3

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

History, structure, and genetic diversity of Brazilian Gir cattle

The Gir cattle breed (Bos indicus) is an important genetic resource for milk production throughout the tropics. The small number of Gir animals introduced in Brazil, rapid dissemination of this breed recently, and the intensification of selection practices could contribute to increase of inbreeding level and reduce genetic diversity in this population. The population was analyzed in terms of pedigree completeness level, inbreeding coefficient, coancestry, generation interval, effective population size, effective number of founders and ancestors, among others. Despite the low mean inbreeding (around 2%), minor problems were identified in the population structure of the Brazilian Gir cattle, e.g., trend of narrower bottlenecks in the pedigree in recent years. The effective population sizes based on inbreeding (94) or coancestry (165.9) as well as the effective number of ancestors (76) and founders (143) were relativity high. The major subdivision of the Gir breed was observed between 1993 and 2002 (dairy and dual-purpose herds, wide use of within-herd matings). In this period the level of inbreeding remained at a higher level, there was a small increase in coancestry and the number of equivalent subpopulations was approximately 6. After 2002, there was genetic exchange between subpopulations, reduction in the average inbreeding, pronounced increase in the average coancestry, and the number of equivalent subpopulations was about 2. Furthermore, it was found that the mean generation interval of the population tended to increase in recent years (around 9 years). About 23% of genetic diversity has been lost since the first generation of founders. Based on the effective population size, number of equivalent subpopulations, inbreeding, coancestry, and loss of genetic diversity, the Gir population is still highly structured, but there is ample room for artificial selection. The results regarding the effective number of founders and ancestors in the present population demonstrate the existence of bottlenecks in the pedigree and indicate the need for population structure monitoring. Nevertheless, the Brazilian Gir breed can perfectly face a breeding program with high selection intensity. (C) 2014 Elsevier B.V. All rights reserved.

Population Structure and Pathotype Diversity of the Wheat Blast Pathogen Magnaporthe oryzae 25 Years After Its Emergence in Brazil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Trichome structure and evolution in Neotropical lianas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Aspergillus niger beta-Glucosidase Has a Cellulase-like Tadpole Molecular Shape INSIGHTS INTO GLYCOSIDE HYDROLASE FAMILY 3 (GH3) beta-GLUCOSIDASE STRUCTURE AND FUNCTION

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Structure and post-translational modifications of the web silk protein spidroin-1 from Nephila spiders

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

The structure of bird communities in areas revegetated after mining in southern Brazil

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Feasibility of RF Sputtering and PIIID for production of thin films from red mud

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Structure and catalytic properties of sulfated zirconia foams

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)