The additive effect of zwitterion and nano-particles on ion dissociation in polyelectrolytes

To realise the battery potential of gel polyelectrolytes greater ion dissociation, ultimately leading to higher conductivities, must be achieved. Higher conductivities will result through increasing the ion-dissociating properties of the gel polyelectrolyte. The poor degree of ion dissociation arises as the active ion tends to remain in close proximity to the backbone charge. Nano-particle inorganic oxides, and zwitterionic compounds have been shown to act as dissociation enhancers in certain polyelectrolyte systems. In an attempt to further increase ion dissociation the addition of both TiO₂ nano-particles and a zwitterionic compound based on 1-butylimidazolium-3-N-(butanesulphonate) were added to the gel polyelectrolyte system poly (Li-2-acrylamido-2-methyl-1-propane sulphonate-co-N,N′-dimethylacrylamide), poly(Li-AMPS-co-DMAA) to determine if a synergistic effect occurs. Two different solvents were used to determine the breadth of applicability of the additive effect. The use of both dissociators resulted in the maximum ionic conductivity being achieved at lower nano-particle concentrations when compared to an identical system without zwitterion.

Lithium-doped plastic crystal electrolytes exhibiting fast ion conduction for secondary batteries

Rechargeable lithium batteries have long been considered an attractive alternative power source for a wide variety of applications. Safety and stability1 concerns associated with solvent-based electrolytes has necessitated the use of lithium intercalation materials (rather than lithium metal) as anodes, which decreases the energy storage capacity per unit mass. The use of solid lithium ion conductors - based on glasses, ceramics or polymers - as the electrolyte would potentially improve the stability of a lithium metal anode while alleviating the safety concerns. Glasses and ceramics conduct via a fast ion mechanism, in which the lithium ions move within an essentially static framework. In contrast, the motion of ions in polymer systems is similar to that in solvent-based electrolytes - motion is mediated by the dynamics of the host polymer, thereby restricting the conductivity to relatively low values. Moreover, in the polymer systems, the motion of the lithium ions provides only a small fraction of the overall conductivity2, which results in severe concentration gradients during cell operation, causing premature failure3. Here we describe a class of materials, prepared by doping lithium ions into a plastic crystalline matrix, that exhibit fast lithium ion motion due to rotational disorder and the existence of vacancies in the lattice. The combination of possible structural variations of the plastic crystal matrix and conductivities as high as 2 3 1024 S cm21 at 60 8C make these materials very attractive for secondary battery applications.

Alcohol expectancies and drinking refusal self-efficacy mediate the association of impulsivity with alcohol misuse

Background: Recent work suggests that 2 biologically based traits convey risk for alcohol misuse: reward sensitivity ⁄ drive and (rash) impulsiveness. However, the cognitive mechanisms through which these traits convey risk are unclear. This study tested a model predicting that the risk conveyed by reward sensitivity is mediated by a learning bias for the reinforcing outcomes of alcohol consumption (i.e., positive alcohol expectancy). The model also proposed that the risk conveyed by rash impulsiveness (RI) is mediated by drinkers’ perceived ability to resist alcohol (i.e., drinking refusal self-efficacy).
Methods: Study 1 tested the model in a sample of young adults (n = 342). Study 2 tested the model in a sample of treatment-seeking substance abusers (n = 121). All participants completed a battery of personality, cognitive, and alcohol use questionnaires and models were tested using structural equation modeling.
Results: In both studies, the hypothesized model was found to provide a good fit to the data, and a better fit than alternative models. In both young adults and treatment-seeking individuals, positive alcohol expectancy fully mediated the association between reward sensitivity and hazardous alcohol use. For treatment seekers, drinking refusal self-efficacy fully mediated the association between RI and hazardous drinking. However, there was partial mediation in the young adult sample. Furthermore, neither trait was directly associated with the other cognitive mediator.
Conclusions: The hypothesized model was confirmed on a large sample of young adults and replicated on a sample of treatment-seeking substance abusers. Taken together, these findings shed further light on the mechanisms through which an impulsive temperament may convey risk for alcohol misuse.

The electrochemistry of lithium in ionic liquid/organic diluent mixtures

The electrochemistry of lithium is investigated in a number of electrolytes that consist of a lithium salt dissolved in a combined ionic liquid-organic diluent medium. We find that ethylene carbonate and vinylene carbonate improve electrochemical behaviour, while toluene and tetrahydrofuran are less promising.We also present insights into the electrode passivation caused by these diluents in an ionic liquid electrolyte during lithium cycling. We observe that during lithium cycling those electrolytes with carbonate based diluents are the most able to utilise their previously reported improved lithium ion diffusivities. Conversely, tetrahydrofuran, the most promising diluent of those studied in terms of its known ability to increase lithium ion diffusivity is found not to be as advantageous as a diluent. It appears that the poor electrochemical interfacial properties of the tetrahydrofuran electrolyte prevented the realisation of the benefits of the high solution lithium ion diffusivity.

A naturalistic study of treatment outcomes with aripiprazole in young people with first episode psychosis

Objective: Adequate treatment of a first psychotic episode in young people is a difficult challenge but may be of critical importance for changing the course of psychotic illness. Pharmacotherapy is the standard treatment of psychosis, however there is a paucity of data specific to first-episode psychosis.
Methods: In this study 12 young people who presented with a psychotic episode at a specialised early intervention service were commenced on treatment with aripiprazole. They were assessed at baseline and weeks 4, 6, 24 and 48 using a broad battery of outcome measures. Case notes were also examined.
Results: Data was available for 6 participants at week 48, and of those, one remained on treatment with Aripiprazole at endpoint. Case histories were typified by presentations that included illicit substance use and treatments characterised by several changes in medications. No single treatment choice predominated. Most participants tolerated treatment and showed symptomatic improvement with individualised therapy.
Conclusion: Most participants showed improvement during the treatment period. Aripiprazole was one of many medications used in this study and may have been useful for the treatment of some individuals with first episode psychosis.

Power-cycle-library-based control strategy for plug-in hybrid electric vehicles

It has been demonstrated that considering the knowledge of drive cycle as a priori in the PHEV control strategy can improve its performance. The concept of power cycle instead of drive cycle is introduced to consider the effect of noise factors in the prediction of future drivetrain power demand. To minimize the effect of noise factors, a practical solution for developing a power-cycle library is introduced. A control strategy is developed using the predicted power cycle which inherently improves the optimal operation of engine and consequently improves the vehicle performance. Since the control strategy is formed exclusively for each PHEV rather than a preset strategy which is designed by OEM, the effect of different environmental and geographic conditions, driver behavior, aging of battery and other components are considered for each PHEV. Simulation results show that the control strategy based on the driver library of power cycle would improve both vehicle performance and battery health.

Psychometric properties of the caregiver assessment of movement participation scale for screening children with development coordination disorders

Using Rasch analysis, the psychometric properties of a newly developed 35-item parent-proxy instrument, the Caregiver Assessment of Movement Participation (CAMP), designed to measure movement participation problems in children with Developmental Coordination Disorder, were examined. The CAMP was administered to 465 school children aged 5–10 years. Thirty of the 35 items were retained as they had acceptable infit and outfit statistics. Item separation (7.48) and child separation (3.16) were good; moreover, the CAMP had excellent reliability (Reliability Index for item = 0.98; Person = 0.91). Principal components analysis of item residuals confirmed the unidimensionality of the instrument. Based on category probability statistics, the original five-point scale was collapsed into a four-point scale. The item threshold calibration of the CAMP with the Movement Assessment Battery for Children Test was computed. The results indicated that a CAMP total score of 75 is the optimal cut-off point for identifying children at risk of movement problems.

Towards autonomous image fusion

Mobile robots are providing great assistance operating in hazardous environments such as nuclear cores, battlefields, natural disasters, and even at the nano-level of human cells. These robots are usually equipped with a wide variety of sensors in order to collect data and guide their navigation. Whether a single robot operating all sensors or a swarm of cooperating robots operating their special sensors, the captured data can be too large to be transferred across limited resources (e.g. bandwidth, battery, processing, and response time) in hazardous environments. Therefore, local computations have to be carried out on board the swarming robots to assess the worthiness of captured data and the capacity of fused information in a certain spatial dimension as well as selection of proper combination of fusion algorithms and metrics. This paper introduces to the concepts of Type-I and Type-II fusion errors, fusion capacity, and fusion worthiness. These concepts together form the ladder leading to autonomous fusion systems.

The validity of the CGI severity and improvement scales as measures of clinical effectiveness suitable for routine clinical use

Objective The Clinical Global Impression Scale (CGI) is established as a core metric in psychiatric research. This study aims to test the validity of CGI as a clinical outcome measure suitable for routine use in a private inpatient setting.

Methods The CGI was added to a standard battery of routine outcome measures in a private psychiatric hospital. Data were collected on consecutive admissions over a period of 24 months, which included clinical diagnosis, demographics, service utilization and four routine measures (CGI, HoNOS, MHQ-14 and DASS-21) at both admission and discharge. Descriptive and comparative data analyses were performed.

Results Of 786 admissions in total, there were 624 and 614 CGI-S ratings completed at the point of admission and discharge, respectively, and 610 completed CGI-I ratings. The admission and discharge CGI-S scores were correlated (r = 0.40), and the indirect improvement measures obtained from their differences were highly correlated with the direct CGI-I scores (r = 0.71). The CGI results reflected similar trends seen in the other three outcome measures.

Conclusions The CGI is a valid clinical outcome measure suitable for routine use in an inpatient setting. It offers a number of advantages, including its established utility in psychiatric research, sensitivity to change, quick and simple administration, utility across diagnostic groupings, and reliability in the hands of skilled clinicians.

Ionic liquid electrolyte for lithium metal batteries : physical, electrochemical, and interfacial studies of N-Methyl-N-butylmorpholinium Bis(fluorosulfonyl)imide

The ionic liquid (IL) N-methyl-N-butylmorpholinium bis(fluorosulfonyl)imide (C₄mmor FSI) is examined from physical and electrochemical perspectives. Pulsed field gradient NMR spectroscopy shows that ion diffusivities are low compared with similar, non-ethereal ILs. Ionicity values indicate that above room temperature, less than 50% of ions contribute to conductivity.

Lithium cycling in symmetrical cells using a C₄mmor FSI-based electrolyte is best demonstrated at elevated temperatures. Specific capacities of 130 mAh g⁻¹ are achieved in a Li−LiFePO₄ battery at 85 °C. FT-IR spectroscopic investigations of lithium electrodes suggest the presence of alkoxide species in the solid electrolyte interphase (SEI), implying a ring-opening reaction of C₄mmor with lithium metal. In contrast, the SEI derived from N-methyl-N-propylpiperidinium FSI lacks the alkoxide signature but shows signs of alkyl unsaturation, and the activation energy for Li+ transport through this SEI is slightly lower than that for the C₄mmor-derived SEI. Our detailed findings give insight into the capabilities and limitations of rechargeable lithium metal batteries utilizing a C₄mmor FSI electrolyte.

New approach to controllable nitrogen doping for improved nano-semiconductors

The data covers the following:
X-ray photoelectron spectroscopy (XPS) - to collect surface chemical structure changes (using RMIT instrument);
Scanning electron microscopy (SEM) - to collect surface physical structure changes;
Atomic force microscopy (AFM) - to collect surface morphology changes;
Internal/External quantum efficiency (IQE/EQE) – to collect DSSC (Dye Sensitised Solar Cells) efficiency data;
Discharge/Charge capacity - to collect battery efficiency data.

Backward modelling and look-ahead fuzzy energy management controller for a parallel hybrid vehicle

This paper focuses on a parallel hybrid electric vehicle. It first develops a model for the vehicle using the backward-looking approach where the flow of energy starts from wheels and spreads towards engine and electric motor. Next, a fuzzy logic-based strategy is developed to control the operation of the vehicle. The objectives of the controller include managing the energy flow from engine and electric motor, controlling transmission ratio, adjusting speed, and sustaining battery's state of charge. The controller examines current vehicle speed, demand torque, slope difference, state of charge of battery, and engine and electric motor rotation speeds. Then, it determines the best values for continuous variable transmission ratio, speed, and torque. A slope window scheme is also developed to take into account the look-ahead slope information and determine the best vehicle speed for better fuel economy. The developed model and control strategy are simulated. The simulation results are presented and discussed. It is shown that the use of the proposed fuzzy controller reduces fuel consumption.

Polyterthiophene/CNT composite as a cathode material for lithium batteries employing an ionic liquid electrolyte

A polyterthiophene (PTTh)/multi-walled carbon nanotube (CNT) composite was synthesised by in situ chemical polymerisation and used as an active cathode material in lithium cells assembled with an ionic liquid (IL) or conventional liquid electrolyte, LiBF₄/EC–DMC–DEC. The IL electrolyte consisted of 1-ethyl-3-methylimidazolium tetrafluoroborate (EMIBF₄) containing LiBF₄ and a small amount of vinylene carbonate (VC). The lithium cells were characterised by cyclic voltammetry (CV) and galvanostatic charge/discharge cycling. The specific capacity of the cells with IL and conventional liquid electrolytes after the 1st cycle was 50 and 47 mAh g⁻¹ (based on PTTh weight), respectively at the C/5 rate. The capacity retention after the 100th cycle was 78% and 53%, respectively. The lithium cell assembled with a PTTh/CNT composite cathode and a non-flammable IL electrolyte exhibited a mean discharge voltage of 3.8 V vs Li⁺/Li and is a promising candidate for high-voltage power sources with enhanced safety.

Substrate-induced coagulation (SIC) of nano-disperse carbon black in non-aqueous media : a method of manufacturing highly conductive cathode materials for Li-ion batteries by self-assembly

Substrate-induced coagulation (SIC) is a coating process based on self-assembly for coating different surfaces with fine particulate materials. The particles are dispersed in a suitable solvent and the stability of the dispersion is adjusted by additives. When a surface, pre-treated with a flocculant e.g. a polyelectrolyte, is dipped into the dispersion, it induces coagulation resulting in the deposition of the particles on the surface. A non-aqueous SIC process for carbon coating is presented, which can be performed in polar, aprotic solvents such as N-Methyl-2- pyrrolidinone (NMP). Polyvinylalcohol (PVA) is used to condition the surface of substrates such as mica, copperfoil, silicon-wafers and lithiumcobalt oxide powder, a cathode material used for Li-ion batteries. The subsequent SIC carbon coating produces uniform layers on the substrates and causes the conductivity of lithiumcobalt oxide to increase drastically, while retaining a high percentage of active battery material.