Influence of alloy microstructure on the microshear bond strength of basic alloys to a resin luting cement

The aim of this study was to evaluate the influence of microstructure and composition of basic alloys on their microshear bond strength (µSBS) to resin luting cement. The alloys used were: Supreme Cast-V (SC), Tilite Star (TS), Wiron 99 (W9), VeraBond II (VBII), VeraBond (VB), Remanium (RM) and IPS d.SIGN 30 (IPS). Five wax patterns (13mm in diameter and 4mm height) were invested, and cast in a centrifugal casting machine for each basic alloy. The specimens were embedded in resin, polished with a SiC paper and sandblasted. After cleaning the metal surfaces, six tygon tubes (0.5 mm height and 0.75 mm in diameter) were placed on each alloy surface, the resin cement (Panavia F) was inserted, and the excess was removed before light-curing. After storage (24 h/37°C), the specimens were subjected to µSBS testing (0.5 mm/min). The data were subjected to a one-way repeated measures analysis of variance and Turkey's test (α=0.05). After polishing, their microstructures were revealed with specific conditioners. The highest µSBS (mean/standard deviation in MPa) were observed in the alloys with dendritic structure, eutectic formation or precipitation: VB (30.6/1.7), TS (29.8/0.9), SC (30.6/1.7), with the exception of IPS (31.1/0.9) which showed high µSBS but no eutectic formation. The W9 (28.1/1.5), VBII (25.9/2.0) and RM (25.9/0.9) showed the lowest µSBS and no eutectic formation. It seems that alloys with eutectic formation provide the highest µSBS values when bonded to a light-cured resin luting cement.

Shear bond strength of nanofilled flowable resins used for indirect bracket bonding

AIM: To evaluate the bond strength of brackets fixed with different materials (two light-cured nanofilled resins - Transbond Supreme LV and Flow Tain LV, a light-cured resin - Transbond XT (control) and two chemically cured resins for indirect bonding - Sondhi Rapid- Set and Custom I.Q.) using the indirect bonding technique after 10 min and 24 h, and evaluate the type of failure. METHODS: One hundred premolars were selected and randomly divided into groups (n=10) according to the material and fixation period. The brackets were bonded through the indirect technique following the manufacturer's instructions and stored in deionized water at 37°C for 10 min or 24 h. After, the specimens were submitted to a shear bond strength (SBS) test (Instron) at 0.5 mm/min and evaluated for adhesive remnant index (ARI). The data were submitted to ANOVA and Tukey's test (p<0.05) and the ARI scores were submitted to the chi-square test. RESULTS: It could be observed a significant difference among the materials (Flow Tain LV = Transbond Supreme LV = Transbond XT> Sondhi Rapid-Set > Custom I.Q.). There was no significant difference in resistance values between 10 min and 24 h, regardless of the materials. Most groups showed adhesive remaining adhered to the enamel (scores 2 and 3) without statistically significant difference (p>0.05). CONCLUSIONS: It was concluded that the light-cured nanofilled materials used in indirect bonding showed greater resistance than the chemically cured materials. The period of fixation had no influence on the resistance for different materials.

James Bond will return: der serielle Charakter der James Bond-Filme

Die James Bond-Filme: seit über 40 Jahren sind sie ein unübersehbarer Bestandteil der Populärkultur. Anfang der 60er Jahre unter völlig anderen historischen, sozialen und nicht zuletzt filmtechnischen Voraussetzungen aus der Taufe gehoben, gelingt es ihnen auch heute noch, ein Massenpublikum für sich zu gewinnen. Inwiefern kann man bei einer so langen Laufzeit überhaupt noch von einer homogenen Serie sprechen? Und was für Gemeinsamkeiten, Unterschiede und auch Weiterentwicklungen von der ursprünglichen Machart sind hier zu beobachten? Dies sind die Grundfragen der vorliegenden Dissertation. Bei der Benennung der seriellen Eigenschaften werden sowohl inhaltliche als auch dramaturgische und filmtechnisch-formale Aspekte betrachtet. Die Figurenkonstellation von Held, Gegenspieler und der weiblichen Hauptfigur, die zwischen den beiden steht und häufig die Seiten wechselt, ist ein Schema das - kaum variiert - schon in den Romanvorlagen Ian Flemings zum Einsatz kam und auch das Rückgrat der Film-Plots bildet. Dennoch ließ dieses Gerüst den mittlerweile fünf verschiedenen Darstellern, die James Bond nacheinander verkörperten, genügend Freiraum für das Ausarbeiten eines eigenen Rollenkonzepts, das auf ihren speziellen Schauspielstil ausgerichtet war. Dadurch erhielt die James Bond-Figur jeweils eine Neuinterpretation, die sich insbesondere in ihrem sozialen Habitus bemerkbar macht, der je nach Darsteller zwischen provokantem Aufsteigertyp und aristokratischem Gentleman changierte. Zum unverwechselbaren Erkennungsmerkmal der Bond-Serie avancierte die so genannte 'gun-barrel'-Sequenz, die in den ersten Sekunden jedes Films abläuft. Auch die sich anschließende Vortitelsequenz, eine auf Spannung oder Action angelegte Szene, die einen Vorgeschmack auf den folgenden Film liefern soll, ist ein Element, das der Machart von Fernsehserien entnommen ist. Neben diesen bewusst eingesetzten Markenzeichen lässt sich auch in der Gestaltungsweise der Filme - in Kameraführung, Schnitt, Musik und Set Design - eine stilistische Kontinuität feststellen, die insbesondere dadurch bedingt ist, dass die Serie seit jeher von den Produzenten ähnlich wie ein Familienunternehmen geführt wurde und - zumindest bis Ende der 80er Jahre - auch die kreativen Köpfe der Filme konsequent im eigenen Team ausgebildet wurden.

Modellkomplexe zur Untersuchung der Radikal-Metall-Wechselwirkung innerhalb des wasseroxidierenden Zentrums im Photosystem II

Im Rahmen dieser Arbeit wurden zweikernige Modellkomplexe zur Untersuchung der Radikal-Metallwechselwirkung innerhalb des wasseroxidierenden Zentrums des Photo¬systems II synthetisiert und eine magneto-strukturelle Korrelation dieser Komplexe erstellt. Als Liganden wurden diverse sechs- bis siebenzähnige Chelatliganden verwendet, welche über zwei Koordinationstaschen und eine verbrückende Phenolatgruppe verfügen. Zwei daran gebundene Manganionen liegen in einer wohl definierten Umgebung nicht koordinativ gesättigt vor. An die freien Koordinationsstellen können weitere ein bis zwei Brückenliganden binden, bei denen es sich in dieser Arbeit hauptsächlich um Carboxylate handelt. Durch die Verwendung eines diamagnetischen Brückenliganden konnte die magnetische Spin-Spin-Austauschwechselwirkung zwischen den spintragenden Manganionen über die verbrücken¬de Phenolatgruppe bestimmt werden. Komplexe, welche über Manganionen in den gleichen Oxidationsstufen, aber über unterschiedliche Carboxylatbrückenliganden verfügen, weisen ähnliche magnetische Austauschwechselwirkungen zwischen den Metallzentren auf. Diese Beobachtung konnte durch eine strukturelle Ähnlichkeit dieser Komplexe erklärt werden. Mittels Aufsummieren der Bindungslängen der verbrückenden Phenolateinheit zu beiden Zentralionen kann innerhalb dieser Komplexe jeweils die Länge des Wechselwirkungspfades erhalten werden, welcher die magnetische Austauschwechselwirkung maßgeblich beein¬flusst. Je länger der Wechselwirkungspfad ist, desto kleiner ist die Austausch¬wechsel¬wirkung. Durch Austausch der diamagnetischen Carboxylate durch paramagnetische benzoat¬substituierte Nitronyl Nitroxid Radikale wurden den Komplexen ein bis zwei weitere Spinzentren hinzugefügt, welche mit den Spins der Zentralionen wechselwirken können. Simulationen der magnetischen Suszeptibilitätsmessungen liefern Werte für die magneti¬schen Austausch¬wechselwirkungen zwischen den Nitronyl Nitroxid Radikalen und den Manganionen, die in allen Fällen schwach ferromagnetisch zwischen 0 und 4,7 cm-1 sind. In einer Auftragung dieser Austauschwechselwirkungen gegen die Mangan-Carboxylat-Bindungs¬längen von strukturell charakterisierten äquivalenten acetatverbrückten Komplexen, kann eine lineare Abhängigkeit gezeigt werden.

Design and Fabrication of Bond Wire Micro-Magnetics

This thesis presents a new approach for the design and fabrication of bond wire magnetics for power converter applications by using standard IC gold bonding wires and micro-machined magnetic cores. It shows a systematic design and characterization study for bond wire transformers with toroidal and race-track cores for both PCB and silicon substrates. Measurement results show that the use of ferrite cores increases the secondary self-inductance up to 315 µH with a Q-factor up to 24.5 at 100 kHz. Measurement results on LTCC core report an enhancement of the secondary self-inductance up to 23 µH with a Q-factor up to 10.5 at 1.4 MHz. A resonant DC-DC converter is designed in 0.32 µm BCD6s technology at STMicroelectronics with a depletion nmosfet and a bond wire micro-transformer for EH applications. Measures report that the circuit begins to oscillate from a TEG voltage of 280 mV while starts to convert from an input down to 330 mV to a rectified output of 0.8 V at an input of 400 mV. Bond wire magnetics is a cost-effective approach that enables a flexible design of inductors and transformers with high inductance and high turns ratio. Additionally, it supports the development of magnetics on top of the IC active circuitry for package and wafer level integrations, thus enabling the design of high density power components. This makes possible the evolution of PwrSiP and PwrSoC with reliable highly efficient magnetics.

Tuning of magnetic exchange interactions between organic radicals through bond and space

The dissertation entitled "Tuning of magnetic exchange interactions between organic radicals through bond and space" comprises eight chapters. In the initial part of chapter 1, an overview of organic radicals and their applications were discussed and in the latter part motivation and objective of thesis was described. As the EPR spectroscopy is a necessary tool to study organic radicals, the basic principles of EPR spectroscopy were discussed in chapter 2. rnAntiferromagnetically coupled species can be considered as a source of interacting bosons. Consequently, such biradicals can serve as molecular models of a gas of magnetic excitations which can be used for quantum computing or quantum information processing. Notably, initial small triplet state population in weakly AF coupled biradicals can be switched into larger in the presence of applied magnetic field. Such biradical systems are promising molecular models for studying the phenomena of magnetic field-induced Bose-Einstein condensation in the solid state. To observe such phenomena it is very important to control the intra- as well as inter-molecular magnetic exchange interactions. Chapters 3 to 5 deals with the tuning of intra- and inter-molecular exchange interactions utilizing different approaches. Some of which include changing the length of π-spacer, introduction of functional groups, metal complex formation with diamagnetic metal ion, variation of radical moieties etc. During this study I came across two very interesting molecules 2,7-TMPNO and BPNO, which exist in semi-quinoid form and exhibits characteristic of the biradical and quinoid form simultaneously. The 2,7-TMPNO possesses the singlet-triplet energy gap of ΔEST = –1185 K. So it is nearly unrealistic to observe the magnetic field induced spin switching. So we studied the spin switching of this molecule by photo-excitation which was discussed in chapter 6. The structural similarity of BPNO with Tschitschibabin’s HC allowed us to dig the discrepancies related to ground state of Tschitschibabin’s hydrocarbon(Discussed in chapter 7). Finally, in chapter 8 the synthesis and characterization of a neutral paramagnetic HBC derivative (HBCNO) is discussed. The magneto liquid crystalline properties of HBCNO were studied by DSC and EPR spectroscopy.rn

Synthesis and dynamic study of atropisomeric compounds containing boron-carbon bond

In this thesis we studied the stereodynamic behavior of 1,2-azaborines variously substituted on boron (7a, 7b, 13). Depending on the hindrance of the asymmetric aryl substituent the resulting conformations could be stereolabile or configurationally stable. Through dynamic NMR and lineshape simulation, the energy rotational barriers of the different conformers are obtained. When the barrier is higher than 22-23 kcal/mol stable atropisomers that are fisically separable could be obtained (case of compound 13) and the free activation energy barrier is determinable by kinetic analysis. Absolute configuration of two atropisomers were assigned by comparison between computational calculations and experimental ECD. Isosteric compound 21 is then synthesized in order to compare the rotational barrier around B-Caryl with the one around Cnaphth-Caryl bond.

Push-out bond strength of CAD/CAM-ceramic luted to dentin with self-adhesive resin cements

OBJECTIVES: This study evaluated the initial and the artificially aged push-out bond strength between ceramic and dentin produced by one of five resin cements. METHODS: Two-hundred direct ceramic restorations (IPS Empress CAD) were luted to standardized Class I cavities in extracted human molars using one of four self-adhesive cements (SpeedCEM, RelyX Unicem Aplicap, SmartCem2 and iCEM) or a reference etch-and-rinse resin cement (Syntac/Variolink II) (n=40/cement). Push-out bond strength (PBS) was measured (1) after 24h water storage (non-aged group; n=20/cement) or (2) after artificial ageing with 5000 thermal cycles followed by 6 months humid storage (aged group; n=20/cement). Nonparametrical ANOVA and pairwise Wilcoxon rank-sum tests with Bonferroni-Holm adjustment were applied for statistical analysis. The significance level was set at alpha=0.05. In addition, failure mode and fracture pattern were analyzed by stereomicroscope and scanning electron microscopy. RESULTS: Whereas no statistically significant effect of storage condition was found (p=0.441), there was a significant effect of resin cement (p<0.0001): RelyX Unicem showed significantly higher PBS than the other cements. Syntac/Variolink II showed significantly higher PBS than SmartCEM2 (p<0.001). No significant differences were found between SpeedCEM, SmartCem2, and iCEM. The predominant failure mode was adhesive failure of cements at the dentin interface except for RelyX Unicem which in most cases showed cohesive failure in ceramic. SIGNIFICANCE: The resin cements showed marked differences in push-out bond strength when used for luting ceramic restorations to dentin. Variolink II with the etch-and-rinse adhesive Syntac did not perform better than three of the four self-adhesive resin cements tested.

Further Quantum Mechanical Evidence that Difluorotoluene does not Hydrogen Bond

Calculations were run on the methylated DNA base pairs adenine:thymine and adenine:difluorotoluene to further investigate the hydrogen-bonding properties of difluorotoluene (F). Geometries were optimized using hybrid density functional theory. Single-point calculations at the MP2(full) level were performed to obtain more rigorous energies. The functional counterpoise method was used to correct for the basis set superposition error (BSSE), and the interaction energies were also corrected for fragment relaxation. These corrections brought the B3LYP and MP2 interaction energies into excellent agreement. In the gas phase, the Gibbs free energies calculated at the B3LYP and MP2 levels of theory predict that A and T will spontaneously form an A:T pair while A:F spontaneously dissociates into A and F. Solvation effects on the pairing of the bases were explored using implicit solvent models for water and chloroform. In aqueous solution, both A:T and A:F are predicted to dissociate into their component monomers. Semiempirical calculations were performed on small sections of B-form DNA containing the two pairs, and the results provide support for the concept that base stacking is more important than hydrogen bonding for the stability of the A:F pair within a DNA helix.