Making the fun stop : youth justice reform in Queensland

In 2013 the newly elected conservative Liberal National Party government instigated amendments to the Youth Justice Act 1992 (Qld). Boot camps replaced court ordered youth justice conferencing. In 2014 there were more drastic changes, including opening the Children’s Court proceedings to the public, permitting publication of identifying information of repeat offenders, removing the principle of ‘detention as a last resort’, facilitating prompt transferral of 17 year olds to adult prisons and instigating new bail offences and mandatory boot camp orders for recidivist motor vehicle offenders in Townsville. This article compares these amendments to the legislative frameworks in other jurisdictions and current social research. It argues that these amendments are out of step with national and international best practice benchmarks for youth justice. Early indications are that Indigenous children are now experiencing increased rates of unsentenced remand. The article argues that the government’s policy initiatives are resulting in negative outcomes and that early and extensive evaluations of these changes are essential.

Subtropical values and principles of subtropical design for the South East Queensland region : a report for the Office of Urban Management Queensland Government

The Office of Urban Management recognises that the values which characterise the SEQ region as 'subtropical' are important determinants of form in urban and regional planning. Subtropical values are those qualities on which our regional identity depends. A built environment which responds positively to these values is a critical ingredient for achieving a desirable future for the region. The Centre for Subtropical Design has undertaken this study to identify the particular set of values which characterises SEQ, and to translate theses values into design principals that will maintain and reinforce the value set. The principles not only apply to the overall balance between the natural environment and the built environment, but can be applied by local government authorities to guide local planning schemes and help shape specific built for outcomes.

Addressing barriers to help-seeking behaviour through M-mental health services : a social marketing perspective

Although seeking help for mental ill-health is beneficial, the majority of persons afflicted do not access available help services. Young adults (16-24 years old) in particular have the highest prevalence of mental health problems and the lowest rate of help-seeking behaviour. Key barriers to help-seeking for young adults, including cost, privacy concerns, inconvenience, access to health professionals and interpersonal interaction, appear to derive from the face-to-face method of service delivery traditionally used to distribute mental health services. Social marketing employs the principle of value exchange, whereby consumers will choose a behaviour in exchange for receiving valued benefits and/or a reduction in key barriers, to achieve behavioural goals for social good. The appropriation of mobile digital technology to deliver self-help mental health services may reduce the current barriers to help seeking, however, extant literature offers no empirical support for this proposition. Our research addresses this gap by examining the perceptions of young adults regarding M-mental health services. Depth interviews were undertaken with 15 young adults (18-24 years old), who had self-reported mild-moderate stress, anxiety or depression. The data were thematically analysed with the assistance of Nvivo. The findings reveal M-mental health services reduce the barriers to accessing face-to-face help services to a large extent. However, they also present their own barriers to help-seeking that must be considered by social marketers, including negligible cost expectations and service efficacy concerns. Overall, this study highlights the potential of M-mental health services to encourage early intervention and help-seeking behaviour as part of a social marketing strategy to address mental illness in young adults.

Towards equalisation of the impact of the penal fine : why the wealth of the offender was taken into account

Important changes in the legal regulation of the fine culminated in the implementation of the day‐fine system in many European countries during the twentieth century. These changes resulted from various late nineteenth century rationalities that considered the fine a justifiable punishment. Therefore, they supported extending its application by making it affordable for people on low incomes, which meant imprisonment for fine default could mostly be avoided without undermining the end of punishment. In this paper I investigate the historical development of the penal fine as well as the changing forms of this penalty in Western European criminal systems from the end of the eighteenth century until the late nineteenth century.

Segmenting Australian high school students : two-step cluster analysis preliminary results

A one size fits all approach dominates alcohol programs in school settings (Botvin et al., 2007), which may limit program effectiveness (Snyder et al., 2004). Programs tailored to the meet the needs and wants of adolescent groups may be more effective. Limited attention has been directed towards employing a full segmentation process. Where segmentation has been examined, the focus has remained on socio-demographic characteristics and more recently psychographic variables (Mathijssen et al., 2012). The current study aimed to identify whether the addition of behaviour could be used to identify segments. Variables included attitudes towards binge drinking (α = 0.86), behavioral intentions’ (α = 0.97), perceived behavioral control (PBC), injunctive norms (α = 0.94); descriptive norms (α = 0.87), knowledge and reported behaviour. Data was collected from five schools, n = 625 (32.96% girls). Two-Step cluster analysis produced a sample (n = 625) with a silhouette measure of cohesion and separation of 0.4. The intention measure and whether students reported previously consuming alcohol were the most distinguishing characteristics - predictor importance scores of (1.0). A four segment solution emerged. The first segment (“Male abstainers” – 37.2%) featured the highest knowledge score (M: 5.9) along with the lowest-risk drinking attitudes and intentions to drink excessively. Segment 2 (“At risk drinkers” - 11.2%) were characterised by their high-risk attitudes and high-risk drinking intentions. Injunctive (M: 4.1) and descriptive norms (M: 4.9) may indicate a social environment where drinking is the norm. Segment 3 (”Female abstainers” – 25.9%) represents young girls, who have the lowest-risk attitudes and low intentions to drink excessively. The fourth and final segment (boys = 67.4%) (“Moderate drinkers” – 25.7%) all report previously drinking alcohol yet their attitudes and intentions towards excessive alcohol consumption are lower than other segments. Segmentation focuses on identifying groups of individuals who feature similar characteristics. The current study illustrates the importance of including reported behaviour in addition to psychographic and demographic characteristics to identify unique groups to inform intervention planning and design. Key messages The principle of segmentation has received limited attention in the context of school-based alcohol education programs. This research identified four segments amongst 14-16 year high school students, each of which can be targeted with a unique, tailored program to meet the needs and wants of the target audience.

A theoretical approach to segmenting children’s walking behaviour

Childhood obesity is a leading public health concern globally. This study aimed to extend research applying the principle of market segmentation to gain insight into changing the physical activity behaviour of children, particularly their walk to/from school behaviour. It further examined the utility of employing theory, specifically the Theory of Planned Behaviour (TPB), for this purpose. The study demonstrates the usefulness of behavioural, geographic and psychographic variables, as measured by the TPB, in distinguishing segments, offering an important contrast to prior segmentation studies emphasising demographic variables. This result provides empirical evidence of the value of employing the four segmentation bases, extending beyond a demographic focus, and the importance of incorporating behavioural theory in market segmentation. In so doing, this research provides key insights into changing children’s walking behaviour.

Cost effectiveness of osseointegration

Individuals with limb amputation fitted with conventional socket-suspended prostheses often experience socket-related discomfort leading to a significant decrease in quality of life. Bone-anchored prostheses are increasingly acknowledged as viable alternative method of attachment of artificial limb. In this case, the prosthesis is attached directly to the residual skeleton through a percutaneous fixation. To date, a few osseointegration fixations are commercially available. Several devices are at different stages of development particularly in Europe and the US. [1-15] Clearly, surgical procedures are currently blooming worldwide. Indeed, Australia and Queensland, in particular, have one of the fastest growing populations. Previous studies involving either screw-type implants or press-fit fixations for bone-anchorage have focused on biomechanics aspects as well as the clinical benefits and safety of the procedure. [16-25] In principle, bone-anchored prostheses should eliminate lifetime expenses associated with sockets and, consequently, potentially alleviate the financial burden of amputation for governmental organizations. Sadly, publications focusing on cost-effectiveness are sparse. In fact, only one study published by Haggstrom et al (2012), reported that “despite significantly fewer visits for prosthetic service the annual mean costs for osseointegrated prostheses were comparable with socket-suspended prostheses”.[26] Consequently, governmental organizations such as Queensland Artificial Limb Services (QALS) are facing a number of challenges while adjusting financial assistance schemes that should be fair and equitable to their clients fitted with bone-anchored prostheses. Clearly, more scientific evidence extracted from governmental databases is needed to further consolidate the analyses of financial burden associated with both methods of attachment (i.e., conventional sockets prostheses, bone-anchored prostheses). The purposes of the presentation will be: 1. To outline methodological avenues to assess the cost-effectiveness of bone-anchored prostheses compared to conventional sockets prostheses, 2. To highlight the potential obstacles and limitations in cost-effectiveness analyses of bone-anchored prostheses, 3. To present preliminary results of a cost-comparison analysis focusing on the comparison of the costs expressed in dollars over QALS funding cycles for both methods of attachment.

Catalytic activity evaluation of industrial Pd/C catalyst via gray-box dynamic modeling and simulation of hydropurification reactor

In this paper, dynamic modeling and simulation of the hydropurification reactor in a purified terephthalic acid production plant has been investigated by gray-box technique to evaluate the catalytic activity of palladium supported on carbon (0.5 wt.% Pd/C) catalyst. The reaction kinetics and catalyst deactivation trend have been modeled by employing artificial neural network (ANN). The network output has been incorporated with the reactor first principle model (FPM). The simulation results reveal that the gray-box model (FPM and ANN) is about 32 percent more accurate than FPM. The model demonstrates that the catalyst is deactivated after eleven months. Moreover, the catalyst lifetime decreases about two and half months in case of 7 percent increase of reactor feed flowrate. It is predicted that 10 percent enhancement of hydrogen flowrate promotes catalyst lifetime at the amount of one month. Additionally, the enhancement of 4-carboxybenzaldehyde concentration in the reactor feed improves CO and benzoic acid synthesis. CO is a poison to the catalyst, and benzoic acid might affect the product quality. The model can be applied into actual working plants to analyze the Pd/C catalyst efficient functioning and the catalytic reactor performance.

Generalized element load method for first- and second-order element solutions with element load effect

The finite element method in principle adaptively divides the continuous domain with complex geometry into discrete simple subdomain by using an approximate element function, and the continuous element loads are also converted into the nodal load by means of the traditional lumping and consistent load methods, which can standardise a plethora of element loads into a typical numerical procedure, but element load effect is restricted to the nodal solution. It in turn means the accurate continuous element solutions with the element load effects are merely restricted to element nodes discretely, and further limited to either displacement or force field depending on which type of approximate function is derived. On the other hand, the analytical stability functions can give the accurate continuous element solutions due to element loads. Unfortunately, the expressions of stability functions are very diverse and distinct when subjected to different element loads that deter the numerical routine for practical applications. To this end, this paper presents a displacement-based finite element function (generalised element load method) with a plethora of element load effects in the similar fashion that never be achieved by the stability function, as well as it can generate the continuous first- and second-order elastic displacement and force solutions along an element without loss of accuracy considerably as the analytical approach that never be achieved by neither the lumping nor consistent load methods. Hence, the salient and unique features of this paper (generalised element load method) embody its robustness, versatility and accuracy in continuous element solutions when subjected to the great diversity of transverse element loads.

Novel non-linear elastic structural analysis with generalised transverse element loads using a refined finite element

In the finite element modelling of structural frames, external loads such as wind loads, dead loads and imposed loads usually act along the elements rather than at the nodes only. Conventionally, when an element is subjected to these general transverse element loads, they are usually converted to nodal forces acting at the ends of the elements by either lumping or consistent load approaches. In addition, it is especially important for an element subjected to the first- and second-order elastic behaviour, to which the steel structure is critically prone to; in particular the thin-walled steel structures, when the stocky element section may be generally critical to the inelastic behaviour. In this sense, the accurate first- and second-order elastic displacement solutions of element load effect along an element is vitally crucial, but cannot be simulated using neither numerical nodal nor consistent load methods alone, as long as no equilibrium condition is enforced in the finite element formulation, which can inevitably impair the structural safety of the steel structure particularly. It can be therefore regarded as a unique element load method to account for the element load nonlinearly. If accurate displacement solution is targeted for simulating the first- and second-order elastic behaviour on an element on the basis of sophisticated non-linear element stiffness formulation, the numerous prescribed stiffness matrices must indispensably be used for the plethora of specific transverse element loading patterns encountered. In order to circumvent this shortcoming, the present paper proposes a numerical technique to include the transverse element loading in the non-linear stiffness formulation without numerous prescribed stiffness matrices, and which is able to predict structural responses involving the effect of first-order element loads as well as the second-order coupling effect between the transverse load and axial force in the element. This paper shows that the principle of superposition can be applied to derive the generalized stiffness formulation for element load effect, so that the form of the stiffness matrix remains unchanged with respect to the specific loading patterns, but with only the magnitude of the loading (element load coefficients) being needed to be adjusted in the stiffness formulation, and subsequently the non-linear effect on element loadings can be commensurate by updating the magnitude of element load coefficients through the non-linear solution procedures. In principle, the element loading distribution is converted into a single loading magnitude at mid-span in order to provide the initial perturbation for triggering the member bowing effect due to its transverse element loads. This approach in turn sacrifices the effect of element loading distribution except at mid-span. Therefore, it can be foreseen that the load-deflection behaviour may not be as accurate as those at mid-span, but its discrepancy is still trivial as proved. This novelty allows for a very useful generalised stiffness formulation for a single higher-order element with arbitrary transverse loading patterns to be formulated. Moreover, another significance of this paper is placed on shifting the nodal response (system analysis) to both nodal and element response (sophisticated element formulation). For the conventional finite element method, such as the cubic element, all accurate solutions can be only found at node. It means no accurate and reliable structural safety can be ensured within an element, and as a result, it hinders the engineering applications. The results of the paper are verified using analytical stability function studies, as well as with numerical results reported by independent researchers on several simple frames.

A statistical model for combustion resonance from a DI diesel engine with applications

Introduced in this paper is a Bayesian model for isolating the resonant frequency from combustion chamber resonance. The model shown in this paper focused on characterising the initial rise in the resonant frequency to investigate the rise of in-cylinder bulk temperature associated with combustion. By resolving the model parameters, it is possible to determine: the start of pre-mixed combustion, the start of diffusion combustion, the initial resonant frequency, the resonant frequency as a function of crank angle, the in-cylinder bulk temperature as a function of crank angle and the trapped mass as a function of crank angle. The Bayesian method allows for individual cycles to be examined without cycle-averaging|allowing inter-cycle variability studies. Results are shown for a turbo-charged, common-rail compression ignition engine run at 2000 rpm and full load.

Structural and electronic properties of layered arsenic and antimony arsenide

Layered materials exhibit intriguing electronic characteristics and the search for new types of two-dimensional (2D) structures is of importance for future device fabrication. Using state-of-art first principle calculations, we identify and characterize the structural and electronic properties of two 2D layered arsenic materials, namely, arsenic and its alloy AsSb. The stable 2D structural configuration of arsenic is confirmed to be the low-buckled two-dimensional hexagonal structure by phonon and binding energy calculations. The monolayer exhibits indirect semiconducting properties with gap around 1.5 eV (corrected to 2.2 eV by hybrid function), which can be modulated into a direct semiconductor within a small amount of tensile strain. These semiconducting properties are preserved when cutting into 1D nanoribbons, but the band gap is edge dependent. It is interesting to find that an indirect to direct gap transition can be achieved under strain modulation of the armchair ribbon. Essentially the same phenomena can be found in layered AsSb, except a weak Rashba induced band splitting is present in AsSb due to the nonsymmetric structure and spin orbit coupling. When an additional layer is added on the top, a semiconductor–metal transition will occur. The findings here broaden the family of 2D materials beyond graphene and transition metal dichalcogenides and provide useful information for experimental fabrication of new layered materials with possible application in optoelectronics.

Devenir plurilingue : la perspective des littératies multiples

Abstract - English Multiple literacies refers to reading, reading the world and self. This article proposes an understanding of reading that goes beyond its definition in psychology and applied linguistics. This longitudinal project is interested in a conceptualisation of what reading is, how it functions and what it produces in becoming multilingual. Reading is explored through the lens of an empirical study involving five female pupils from senior Kindergarten to Grade 3 observed and interviewed in relation to activities at school and at home. The study took place in Ottawa schools where French is the sole language of instruction. Reading in the context of multiple literacies is conceptualised to disrupt /deterritorialise and to be immanent, offering the potentiality to go beyond what is to what could be. Becoming multilingual is a continuous movement involving networks of rhizomatic connections and reading the world and self. Résumé - Francais Les littératies multiples se réfèrent à la lecture, la lecture du monde et la lecture de soi. Cet article propose une compréhension de la lecture qui dépasse sa définition usuelle en psychologie et en linguistique appliquée. Ce projet longitudinal porte sur la conceptualisation de la lecture, son fonctionnement et ce qu’elle produit dans le devenir plurilingue. La lecture est examinée selon l’optique d’une étude empirique durant laquelle cinq écolières du jardin d’enfants à la 3e année étaient observées et interviewées par rapport à des activités à l’école et à la maison. L’étude a eu lieu dans des écoles d’Ottawa dont la seule langue d’enseignement est le français. Dans le contexte des littératies multiples, la lecture est conceptualisée comme étant perturbatrice/déterritorialisante et immanente. Elle offre la potentialité d’aller au-delà de ce qui est vers ce qui pourrait être. Devenir plurilingue est un mouvement continu faisant appel à des réseaux de connexions rhizomatiques et à la lecture du monde et de soi.

Direct measurement as a tool for assessing the accuracy of inverse dynamics

The understanding of the loads generated within the prosthetic leg can aid engineers in the design of components and clinicians in the process of rehabilitation. Traditional methods to assess these loads have relied on inverse dynamics. This indirect method estimates the applied load using video recordings and force-plates located at a distance from the region of interest, such as the base of the residuum. The well-known limitations of this method are related to the accuracy of this recursive model and the experimental conditions required (Frossard et al., 2003). Recent developments in sensors (Frossard et al., 2003) and prosthetic fixation (Brånemark et al., 2000) permit the direct measurement of the loads applied on the residuum of transfemoral amputees. In principle, direct measurement should be an appropriate tool for assessing the accuracy of inverse dynamics. The purpose of this paper is to determine the validity of this assumption. The comparative variable used in this study is the velocity of the relative body center of mass (VCOM(t)). The relativity is used to align the static (w.r.t. position) force plate measurement with the dynamic load cell measurement.

GABAa receptors contribute to synaptic integration in lateral amygdala neurons

In classical fear conditioning a neutral conditioned stimulus (CS) such as a tone, is paired with an aversive unconditioned stimulus (US) such as a shock. The CS thereby acquires the capacity to elicit a fear response. This type of associative learning is thought to require co-activation of principle neurons in the lateral nucleus of the amygdala (LA) by two sets of synaptic inputs, a weak CS and a strong US...