Emergence and initial growth of rambutan seedlings as a function of seed storage conditions

Introduction. Rambutan is a tropical fruit species with recalcitrant seeds. Despite the expansion of exotic fruit cultivation in Brazil, lots of which fruit species, including rambutan, need basic information, especially in relation to propagation and storage of seeds, which are important for genetic improvement studies, maintenance of genetic sources and seedling production. Materials and methods. A completely randomized design was adopted with treatments distributed in a factorial arrangement, 3 x 4, referring to three seed storage conditions [room temperature conditions; a dry chamber with (18 +/- 2) degrees C and 60% relative humidity; and a cold chamber with (10 +/- 2) degrees C and 70% relative humidity] and four storage times ( 0, 7, 14 and 21 d). Each treatment of 10 seeds was replicated five times. Data on seedling emergence, emergence rate, plant height, number of leaves and length of main root were submitted to variance analysis and means were separated using Tukey's test. Correlation analysis between seed moisture and seedling emergence was performed. Results and discussion. Our results indicated that dry chamber conditions promoted the statistically significantly highest seedling emergence after 7 d of storage. Cold chamber conditions promoted an extremely low seedling emergence independently of time. Conclusion. Rambutan seeds can be stored in a dry chamber for 7 d without losing viability; after 14 d of storage the loss of emergence is 60%.

Reply to Comment on 'Pb1-xCaxTiO3 solid solution (x=0.0, 0.25, 0.50, and 0.75): A theoretical and experimental approach'

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of juvenility on cutting propagation of red pitaya

Introduction. Pitaya (Hylocereus undatus) is an exotic fruit species little known in Brazil and which needs basic studies about plant nutrition, propagation and physiology. Emphasizing the co-existence of juvenile and adult stages in the pitaya canopy, the plant is generally propagated by cuttings. Materials and methods. A completely randomized design with four treatments and five replications was adopted. Each treatment was represented by the part of the canopy from which the cutting was taken ( upper, middle and lower cutting and cuttings from young plants). The following variables were registered: % cuttings with roots, % of live cuttings, root density, root diameter, root area, root length and root dry mass. Results were submitted to variance analyses, Tukey's test at 0.01 probability error and simple correlation analysis. Results and discussion. The results indicated that the position from which the cutting is taken had a quantitative effect on rooting formation of pitaya cuttings. Juvenile cuttings presented 35% more cuttings with roots than adult cuttings. Root density, root area, root length and root dry mass depended on juvenility, the highest results being registered for juvenile cuttings, independently of the variable. Conclusion. Juvenile and adult stages co-exist in the pitaya canopy. Juvenility is an important rooting factor for red pitaya cuttings.

Double-blind comparison of venlafaxine and amitriptyline in outpatients with major depression with or without melancholia

The purpose of this study was to compare the efficacy and tolerability of venlafaxine and amitriptyline in outpatients with major depression with or without melancholia. This was an 8-week, multicentre, randomized, double-blind, parallel-group comparison of venlafaxine and amitriptyline. Outpatients with DSM-IV major depression, a minimum score of 20 on the 21-item Hamilton Depression Rating Scale (HAM-D), and depressive symptoms for at least 1 month were eligible. Patients were randomly assigned to venlafaxine or amitriptyline, both drugs titrated to a maximum of 150 mg/day until study day 15. The primary efficacy variables were the final on-therapy scores on the HAM-D, Montgomery-Asberg Depression Rating Scale and Clinical Global Impression severity scales. Data were evaluated on an intent-to-treat basis using the LOCF method. One hundred and 16 patients were randomized, and 115 were evaluated for efficacy. Both drugs showed efficacy in the treatment of depression with or without melancholia. No significant differences were noted between treatments for any efficacy parameter. However, significantly (p < 0.05) more patients in the amitriptyline group had at least one adverse event. These results should support the efficacy and tolerability of venlafaxine in comparison with amitriptyline for treating major depression with or without melancholia.

Efeito do Tratamento com Hidróxido de Sódio sobre a Fração Fibrosa, Digestibilidade e Tanino do Feno de Jurema-Preta (Mimosa tenuiflora. Wild)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

A method for the digital image analysis of ceramic grains based on shape factor segmentation

A very simple and robust method for ceramics grains quantitative image analysis is presented. Based on the use of optimal imaging conditions for reflective light microscopy of bulk samples, a digital image processing routine was developed for shading correction, noise suppressing and contours enhancement. Image analysis was done for grains selected according to their concavities, evaluated by perimeter ratio shape factor, to avoid consider the effects of breakouts and ghost boundaries due to ceramographic preparation limitations. As an example, the method was applied for two ceramics, to compare grain size and morphology distributions. In this case, most of artefacts introduced by ceramographic preparation could be discarded due to the use of perimeter ratio exclusion range.

Bryconamericus turiuba, a new species from the upper Rio Paraná system (Ostariophysi: Characiformes)

Bryconamericus turiuba, new species, is described from the upper Rio Paraná system in Brazil. It differs from all congeners in the following combination of characters: 15-20 branched anal-fin rays; four or five scales in a transverse series from the dorsal-fin origin to the lateral line; shallow body (depth 23.6-30.6% of SL); 37-43 perforated lateral line scales; first, third, and fifth or, more rarely, first and fourth outer premaxillary tricuspid teeth projecting anteriorly; two to five tricuspid to pentacuspid maxillary teeth; dentary with three or four tricuspid or pentacuspid large teeth, followed by five to seven smaller conical to tricuspid teeth; a conspicuous dark, vertically elongate humeral spot, extending to below the lateral line; a dark dorsal stripe extending from the supraoccipital spine to the caudal peduncle with a gap at the adipose-fin base; caudal-fin lobes without conspicuous markings, uniformly pigmented along rays; mature males lacking hooks on the pelvic- and anal-fin rays. The new species is compared with the Bryconamericus species described from the basins of the Rio Paraná, Rio Paraguay, Rio São Francisco, and coastal Brazilian rivers. © 2005 by the American Society of Ichthyologists and Herpetologists.

A load cell for grain-propelled ballistic rocket thrust measurement

A 1000-kgf resistive strain-gauge load cell has been developed for quality testing of rocket propellant grain. A 7075-T6 aluminum alloy has been used for the elastic column, in which 8 uniaxial, 120-Ω strain gauges have been bonded and connected to form a full Wheatstone bridge to detect the strain. The chosen geometry makes the transducer insensitive to moments and, also, to the temperature. Experimental tests using a universal testing machine to imposed compression force to the load cell have demonstrated that its behavior is linear, with sensitivity of 2.90 μV/kgf ± 0.34%, and negligible hysteresis. The designed force transducer response to a dynamic test has been comparable to that of a commercial load cell. © 2005 IEEE.

Recycling of silicon carbide and corn starch as binder originating from commercial starch consolidation

The main goal of this work is to demonstrate that the use of recycled material originated from SiC ceramics is viable. These ceramics were produced by commercial starch consolidation process. Before calcination stage, surplus of these materials always appears. This surplus is rich in SiC and starch. Samples were made by material previously milled in automatic mortar and sieved (100 Tyler). Later, 10% of distilled water was added to the material and the mixture was pressed at 40 MPa. In order to characterize the ceramic, three point flexural test were made, according to the ASTM C1161/94 norm. The results were analyzed by Weibull statistical method. Apparent density and porosity measures also were made, according to ASTM C20/87 norm. A verification of the surface was made in the fracture area by the depth from focus method and SEM image analysis. The results showed that the recycling process is fully viable, being a good economic option and reduce possible pollutant effect to the environment.

Physical and chemical characterization of dovyalis fruits

The objective of this work was to establish physical and chemical characterizations of dovyalis hybrid fruits (Dovyalis abyssinica and D. hebecarpa). Samples of 25 fruits were characterized by evaluation of length and width, weight, percentage and number of seeds per fruit, peel percentage, pulp percentage, total soluble solids (TSS), titratable acidity (TA), vitamin C and TSS/TA ratio. Dovyalis fruit has good physical quality for market with an average of 75% pulp. Vitamin C content averaged 120.3 mg/100 g of fresh fruit, characterizing dovyalis as a good source of vitamin C. © 2005 by The Haworth Press, Inc. All rights reserved.

The electronic detail of a digital pH-meter

This paperwork presents the complete circuitry used to build a microcontroller-based pH-meter. Key control software is also discussed. An industry-standard glass combination electrode has been employed for pH detection. Electrode parameter extraction procedure is presented. Good measurement results, with 1 % error, have been attained. Copyright© (2006) by the International Measurement Federation (IMEKO).

Desenvolvimento de três cultivares de mangueira sobre quatro porta-enxertos

The experiment was conducted at the physics structure of the Rio Grande do Norte State Farming Research Company (EMPARN) in Açu-RN, with the objective of evaluate the behavior of grafts-holder cultivates in the plants formation of cultivates used as tops. The experimental design was randonizated blocks in the factorial outline 3 x 4, with 3 repetitions. The analyzed factors were four cultivates of grafts-holder and three cultivates of grafts. As grafts-holders were used the cultivates Carabao and Manga d'agua, originated at the Campinas Agrarian Institute, and the cultivates Rosinha and Espada, obtained from the EMPARN collection. The cultivates used as tops were Tommy Atkins, Van Dyke and Keitt, with the fork that were also obtained at EMPARN. In a period of six months was observed the diameters of the grafts-holder, grafts and hight of the plants. The Cultivar Manga d'agua, as a graft-holder, provided the smallest growing to the mango tree and the Cultivar Tommy Atkins, used as graft, was the one who presented the tallest hight.

Preliminary selection of acerola genotypes in Brazil

Introduction. Breeding studies for acerola (Malpighia glabra) improvement aim at obtaining plants that produce fruits with uniform chemical and physical attributes, including high levels of vitamin C, which can provision the market with fresh fruit and frozen pulp. High variability in fruit quality is observed in Brazilian acerola crops, especially those propagated by seeds. In this context, the objective of our research was to evaluate the physical and chemical characteristics of Brazilian acerola genotype fruits. Materials and methods. Sixteen acerola genotypes were studied in Jaboticabal, São Paulo State, Brazil. A completely randomized design with sixteen treatments and six replications was adopted. Each treatment was represented by one genotype. Several parameters related to fruit quality, such as width, length, weight, pulp percentage, soluble solids (SS), titratable acidity (TA), [SS / TA] ratio and vitamin C content, were evaluated in fruits of the acerola genotypes. The results were submitted to variance analyses, the Tukey test and cluster analysis. Results and discussion. There was a statistical difference between the acerola genotypes studied. Three of them stood out as natural sources of vitamin C. In spite of fruit size, two acerola genotypes were found to have potential for fresh fruit production. In a general form, genotypes that presented a high [SS / TA] ratio had low vitamin C content. Conclusion. The acerola genotypes studied in Jaboticabal presented high variability, forming eleven groups in relation to fruit quality parameters. © 2007 Cirad/EDP Sciences All rights reserved.