962 resultados para Atom optics
Resumo:
Trabalho de Projeto para obtenção do grau de Mestre em Engenharia na Área de Especialização em Vias de Comunicação e Transportes
Resumo:
Applied Physics B Lasers and Optics, vol.71
Resumo:
Review of scientific instruments, Vol.72, Nº9
Resumo:
Trabalho realizado sob orientação do Prof. António Brandão Moniz para a disciplina “Factores Sociais da Inovação” do Mestrado Engenharia Informática realizado na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa (Portugal).
Resumo:
The rheological and structural characteristics of acetoxypropylcellulose (APC) nematic melt are studied at shear rates ranging from 10 s(-1) to 1000 s(-1) which are relevant to extrusion based processes. APC shows a monotonic shear thinning behavior over the range of shear rates tested. The negative extrudate-swell shows a minimum when a critical shear rate (gamma) over dot(c) is reached. For shear rates smaller than (gamma) over dot(c), the flow-induced texture consists of two set of bands aligned parallel and normal to the flow direction. At shear rates larger than (gamma) over dot(c), the flow induced texture is reminiscent of a 2 fluids structure. Close to the shearing walls, domains elongated along the flow direction and stacked along the vorticity are imaged with POM, whereas SALS patterns indicate that the bulk of the sheared APC is made of elliptical domains oriented along the vorticity. No full nematic alignment is achieved at the largest shear rate tested. Below (gamma) over dot(c), the stress relaxation is described by a stretched exponential. Above (gamma) over dot(c), the stress relaxation is described by a fast and a slow process. The latter coincides with the growth of normal bands thicknesses, as the APC texture after flow cessation consists of two types of bands with parallel and normal orientations relative to the flow direction. Both bands thicknesses do not depend on the applied shear rate, in contrast to their orientation. (C) 2015 Elsevier Ltd. All rights reserved.
Resumo:
Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para a obtenção do grau de Mestre em Engenharia Electrotécnica e de Computadores
Resumo:
RESUMO - No contexto económico actual, os custos pelos acidentes devem ser tidos em conta por todos os gestores das organizações, com especial destaque ao sector da saúde. Assim a análise económica deste estudo visa alertar para o impacto económico dos acidentes de trabalho em contexto hospitalar e sensibilizar os gestores para a análise do custo-beneficio da prevenção. Existem custos facilmente constatáveis, tais como, o tempo perdido no dia do acidente, quer pelo sinistrado quer pelos colegas de trabalho que o assistem, as despesas de uma ida ao serviço de urgência, a paragem da produção, a formação de mão-de-obra alternativa, a substituição dos trabalhadores, o pagamento de horas extras, o restabelecimento dos trabalhadores, os salários pagos aos trabalhadores sinistrados, as despesas administrativas e o aumento do prémio do seguro, entre outros. Existem outros custos que não são tão evidentes e por conseguinte, dificilmente quantificáveis, como é o caso da deterioração da imagem da empresa e o impacto sentimental que estes provocam nos colegas de trabalho que se traduz em quebras de produtividade. A análise económica foi realizada tendo em conta a definição de várias variáveis, de várias rubricas de custos pertencentes ao mesmo domínio. Neste projecto pretende-se analisar o custo global da sinistralidade segundo três ópticas distintas. A óptica da variabilidade, da imputabilidade e da responsabilidade, de forma a ser possível obter o custo marginal devido à ocorrência de um novo acidente, o montante de custos assumidos pelas empresas e os custos unitários segundo a natureza e a localização da lesão. ---------- ABSTRACT - In the current economic context, the costs originated by labour accidents must be taken in account by all the managers of the organisations, in this case, especially by the health sector. Thus, the economic analysis of this study case aims, to alert for the economic impact of the industrial accidents and motivate the managers for the analysis of the cost-benefit for prevention. There are kinds of costs easily quantified such as, the lost time in the day of the accident, expenses in the urgencies service, production interruption, workforce formation, workers’ substitution, extra work payment, employers’ healing, wages paid to injured workers’, administrative expenses and a biggest insurers’’ prime, among other things. The economic analysis of the labour injuries, was developed taking in account the definition of some variables, of some cost categories which belong to same domain. In this project we pretend to analyse the global cost labour injuries according to three distinct optics: variability, imputability and responsibility. Thus, it became possible to get the cost due to an occurrence of a new accident, the unitary sum of costs assumed by the companies and costs according to nature and the localisation of the injury.
Resumo:
Trabalho apresentado no âmbito do Doutoramento em Informática, como requisito parcial para obtenção do grau de Doutor em Informática
Resumo:
Dissertação para obtenção do Grau de Doutor em Bioquímica, Especialidade Bioquímica Estrutural
Resumo:
Part of the optical clearing study in biological tissues concerns the determination of the diffusion characteristics of water and optical clearing agents in the subject tissue. Such information is sufficient to characterize the time dependence of the optical clearing mechanisms—tissue dehydration and refractive index (RI) matching. We have used a simple method based on collimated optical transmittance measurements made from muscle samples under treatment with aqueous solutions containing different concentrations of ethylene glycol (EG), to determine the diffusion time values of water and EG in skeletal muscle. By representing the estimated mean diffusion time values from each treatment as a function of agent concentration in solution, we could identify the real diffusion times for water and agent. These values allowed for the calculation of the correspondent diffusion coefficients for those fluids. With these results, we have demonstrated that the dehydration mechanism is the one that dominates optical clearing in the first minute of treatment, while the RI matching takes over the optical clearing operations after that and remains for a longer time of treatment up to about 10 min, as we could see for EG and thin tissue samples of 0.5 mm.
Resumo:
It is known that the fibrous structure of muscle causes light scattering. This phenomenon occurs due to the refractive index discontinuities located between muscle fibers and interstitial fluid. To study the possibility of reducing light scattering inside muscle, we consider its spectral transmittance evolution during an immersion treatment with an optical clearing solution containing ethanol, glycerol, and distilled water. Our methodology consists of registering spectral transmittance of muscle samples while immersed in that solution. With the spectral data collected, we represent the transmittance evolution for some wavelengths during the treatment applied. Additionally, we study the variations that the treatment has caused on the samples regarding tissue refractive index and mass. By analyzing microscopic photographs of tissue cross section, we can also verify changes in the internal arrangement of muscle fibers caused by the immersion treatment. Due to a mathematical model that we develop, we can explain the variations observed in the studied parameters and estimate the amount of optical clearing agent that has diffused into the tissue samples during the immersion treatment. At the end of the study, we observe and explain the improvement in tissue spectral transmittance, which is approximately 65% after 20 min.
Resumo:
Dissertation for the Master Degree in Structural and Functional Biochemistry
Resumo:
J Biol Inorg Chem (2011) 16:443–460 DOI 10.1007/s00775-010-0741-z
Resumo:
J Biol Inorg Chem (2010) 15:409–420 DOI 10.1007/s00775-009-0613-6
Resumo:
J. Am. Chem. Soc., 2009, 131 (23), pp 7990–7998 DOI: 10.1021/ja809448r