Policies on poverty and the fisheries sector in Uganda: the current policy trends

There are concerns, at least among the proponents of development, on how to link policy development processes in Uganda and the associated transformation of the poor to high standards of living. In fact some questions have been posed as to whether it's the absence of poverty-targeted policies that a good proportion of individuals or communities are still poor. In the fisheries sector where most of the fish dependent communities live, poverty indications are still prevalent although arguments have been put that current reforms in the sector have transformed the lives of the fish dependent communities. The 1999/2000 household survey report indicates that the poverty levels reduced to 35% of Uganda's total population from 44% in 1997. The question that arose, which still arises anyway, was to define who is actually poor. When measuring poverty one is ultimately interested in the 'standards of living' of individuals especially those, whose standards of living are inadequate. The basic element of measuring this inadequacy/adequacy, at least in Uganda, is to use the household income or consumption per adult equivalent. Studies have demonstrated that household consumption expenditure is a good approximation of household income1. Therefore, for purpose of this report, we define poor households to mean based on that that one adopted by the Ministry of Finance to mean "households whose expenditure per adult equivalent falls below the poverty line 3 ". Many government documents report that the poverty line is one dollar a day. Therefore someone is below the poverty line if he or she lives on less than one dollar a day. In this paper, we analyse the evolution of poverty-driven policies that have been put in place by government and how these policies are shifting or are likely to shift the lives of fish dependent communities. We argue that combinations of poverty-policies are being translated into increased incomes and welfare of most individuals in the fisheries sector. The reasons for this shift, we argue, is as a result of a combination of factors all supported by non other that poverty-led government policies.

Report on the current state of the fishery of the Ugandan sector of Lake Albert

Following a general outcry by the population riparian to the Ugandan portion of lake Albert about dwindling fish catches, there was concern both from the FAO Country representative in Uganda and the government of Uganda on the state of the fisheries of this lake. The FAO representative accompanied by an official from the Uganda Fisheries and Fish Conservation Association (UFFCA) visited the lake in July 1999 (Appendix I). The Ugandan minister of state in charge of the Fisheries sector also visited the lake in November 1999 (Appendix II). The two were in common agreement that the lake was in a stocks crisis and there was need for remedial measures. It was therefore deemed necessary to initiate a technical report updating the present state of the fisheries resources of this lake. An agreement was thus signed between the author and the Food and Agricultural Organization of the United Nations - Sub-Regional Office for Southern Africa in Harare, to undertake this exercise.

Current composition, distribution and relative abundance of the fish stocks of Lake Victoria, Uganda

An experimental bottom trawl survey was carried out in the Uganda sector of Lake Victoria during the period May 1993 through May 1995 with the aim of establishing the current composition, distribution and abundance of the fish stocks. A total of 205 successful one-hour hauls were taken using the 25.4mm mesh size codend trawl net during the 19 cruises. Fourteen fish taxa (excluding the haplochromines) were recorded with Lates niloticus constituting the bulk (97 %) of the fish retained. Haplochromines and L. nilolicus were encountered in all areas sampled while Nile tilapia (Oreochromis niloticus) and other tilapiines were restricted to waters less than 20 metres deep. An average catch of 154 kg/hr was obtained in waters less than 30 metres deep. Species diversity and relative abundance varied with depth. Only two of the fifteen fish taxa (haplochromines and L.niloticus) were recorded in waters deeper than 30 metres and the bulk of the fish by weight (92 %) was obtained in waters less than 30 metres.

Plasma enhancement of current from carbon cathodes for field emission displays

This paper examines the possibility of using a background gas medium to enhance the current available from low threshold carbon cathodes. The field emission current is used to initiate a plasma in the gas medium, and thereby achieve a current multiplication effect. Results on the variation of anode current as a function of electric field and gas pressure are presented. These are compared with model calculations to verify the principles of operation. The influence of ion bombardment on the long term performance thin film carbon cathodes is examined for He and Ar multiplication plasmas. A measure of the influence of current multiplication on display quality is presented by examining light output from two standard low voltage phosphors. Also studied are the influence of doping the carbon with N to lower the threshold voltage for emission as well as the consequent impact on anode current from the plasma.

Deposition of c-axis orientation aluminum nitride films on flexible polymer substrates by reactive direct-current magnetron sputtering

Aluminum nitride (AlN) piezoelectric thin films with c-axis crystal orientation on polymer substrates can potentially be used for development of flexible electronics and lab-on-chip systems. In this study, we investigated the effects of deposition parameters on the crystal structure of AlN thin films on polymer substrates deposited by reactive direct-current magnetron sputtering. The results show that low sputtering pressure as well as optimized N 2/Ar flow ratio and sputtering power is beneficial for AlN (002) orientation and can produce a highly (002) oriented columnar structure on polymer substrates. High sputtering power and low N 2/Ar flow ratio increase the deposition rate. In addition, the thickness of Al underlayer also has a strong influence on the film crystallography. The optimal deposition parameters in our experiments are: deposition pressure 0.38 Pa, N 2/Ar flow ratio 2:3, sputtering power 414 W, and thickness of Al underlayer less than 100 nm. © 2012 Elsevier B.V. All rights reserved.

Study of second generation, high-temperature superconducting coils: Determination of critical current

This paper presents the modeling of second generation (2 G) high-temperature superconducting (HTS) pancake coils using finite element method. The axial symmetric model can be used to calculate current and magnetic field distribution inside the coil. The anisotropic characteristics of 2 G tapes are included in the model by direct interpolation. The model is validated by comparing to experimental results. We use the model to study critical currents of 2 G coils and find that 100μV/m is too high a criterion to determine long-term operating current of the coils, because the innermost turns of a coil will, due to the effect of local magnetic field, reach their critical current much earlier than outer turns. Our modeling shows that an average voltage criterion of 20μV/m over the coil corresponds to the point at which the innermost turns' electric field exceeds 100μV/m. So 20μV/m is suggested to be the critical current criterion of the HTS coil. The influence of background field on the coil critical current is also studied in the paper. © 2012 American Institute of Physics.

Tests for conceptual design of 6.6 kV class superconducting fault current limiter with YBCO thin film elements

A superconducting fault current limiter (SFCL) for 6.6 kV and 400 A installed in a cubicle for a distribution network substation was conceptually designed. The SFCL consists of parallel- and series-connected superconducting YBCO elements and a limiting resistor. Before designing the SFCL, some tests were carried out. The width and length of each element used in the tests are 30 mm and 210 mm, respectively. The element consists of YBCO thin film of about 200 nm in thickness on cerium dioxide (CeO2) as a cap-layer on a sapphire substrate by metal-organic deposition with a protective metal coat. In the tests, characteristics of each element, such as over-current, withstand-voltage, and so on, were obtained. From these characteristics, series and parallel connections of the elements, called units, were considered. The characteristics of the units were obtained by tests. From the test results, a single phase prototype SFCL was manufactured and tested. Thus, an SFCL rated at 6.6 kV and 400 A can be designed. © 2009 IEEE.