De annonae saevitia ac fame, ejusque praesagiis, causis, effectis, atque remediis

Invokaatio: I.N.J.

De causa mali prima ac genuina

Invokaatio: In nomine Jesu!

De familiis illustribus & nobilitate Sveo-Gothicâ ac Fennicâ

Arkit: 1 arkintunnukseton lehti, Y-2B8, 1 arkintunnukseton lehti.

Industria philosophiae, quâ cujusvis sectae adversarijs sive status per compendium iri obviam potest, ac multae difficultates unà in disceptationibus felicitèr superari

Invokaatio: I.N.D.O.M.

Combined treatment with caffeic and ferulic acid from Baccharis uncinella C. DC. (Asteraceae) protects against metabolic syndrome in mice

Fractionation of the EtOH extract from aerial parts of Baccharis uncinella C. DC. (Asteraceae) led to isolation of caffeic and ferulic acids, which were identified from spectroscopic and spectrometric evidence. These compounds exhibit antioxidant and anti-inflammatory properties and have been shown to be effective in the prevention/treatment of metabolic syndrome. This study investigated whether the combined treatment of caffeic and ferulic acids exhibits a more significant beneficial effect in a mouse model with metabolic syndrome. The combination treatment with caffeic and ferulic acids was tested for 60 days in C57 mice kept on a high-fat (40%) diet. The data obtained indicated that treatment with caffeic and ferulic acids prevented gain in body weight induced by the high-fat diet and improved hyperglycemia, hypercholesterolemia and hypertriglyceridemia. The expression of a number of metabolically relevant genes was affected in the liver of these animals, showing that caffeic and ferulic acid treatment results in increased cholesterol uptake and reduced hepatic triglyceride synthesis in the liver, which is a likely explanation for the prevention of hepatic steatosis. In conclusion, the combined treatment of caffeic and ferulic acids displayed major positive effects towards prevention of multiple aspects of the metabolic syndrome and liver steatosis in an obese mouse model.

Comparison of Model-Based Flow Rate Estimation Methods in Frequency-Converter-Driven Pumps and Fans

Fluid handling systems such as pump and fan systems are found to have a significant potential for energy efficiency improvements. To deliver the energy saving potential, there is a need for easily implementable methods to monitor the system output. This is because information is needed to identify inefficient operation of the fluid handling system and to control the output of the pumping system according to process needs. Model-based pump or fan monitoring methods implemented in variable speed drives have proven to be able to give information on the system output without additional metering; however, the current model-based methods may not be usable or sufficiently accurate in the whole operation range of the fluid handling device. To apply model-based system monitoring in a wider selection of systems and to improve the accuracy of the monitoring, this paper proposes a new method for pump and fan output monitoring with variable-speed drives. The method uses a combination of already known operating point estimation methods. Laboratory measurements are used to verify the benefits and applicability of the improved estimation method, and the new method is compared with five previously introduced model-based estimation methods. According to the laboratory measurements, the new estimation method is the most accurate and reliable of the model-based estimation methods.

Comparação entre os métodos rápidos SimplateR TPC- CI e PetrifilmR AC e os métodos convencionais de contagem em placas para a enumeração de aeróbios mesófilos em sorvetes

A contagem de aeróbios mesófilos ou contagem padrão em placas em um produto alimentício reflete a qualidade da matéria-prima, bem como as condições de processamento, manuseio e estocagem. O método de contagem em placas tradicionais requer 48h de incubação para a posterior leitura dos resultados. Comparou-se dois métodos que parecem ser uma boa alternativa para a contagem padrão em placas: SimplateR TPC-CI e PetrifilmR AC. Também avaliou-se a capacidade inibitória do 2, 3, 5 cloreto de trifeniltetrazólio quando adicionado ao Agar Plate Count. Este corante é incolor na forma oxidada e vermelho quando reduzido pelos microrganismos, devido à formação de formazano. O coe-ficiente de correlação obtido, através de estudos conduzidos com 60 amostras de sorvetes, entre 0,866-0,979 indicou uma equivalente sensibilidade dos métodos testados. Somente a contagem padrão em placas com TTC diferiu signicativamente da contagem padrão em placas.

Caracterização físico-química e microbiológica da farinha de algaroba (Prosopis juliflora (Sw.) DC)

Algaroba (Prosopis juliflora (Sw.) D.C.) é uma leguminosa arbórea tropical comum no semi-árido brasileiro e desenvolve-se em lugares secos, onde dificilmente outras plantas poderiam sobreviver. Suas vagens produzem uma farinha que pode ser usada na alimentação humana, além de vários outros produtos como o mel, licor e um produto similar ao café. Este trabalho teve por objetivo caracterizar quanto à composição físico-química e microbiológica a farinha de algaroba potencialmente passível de introdução como matéria-prima de interesse comercial. A farinha de algaroba foi analisada quanto ao teor de umidade, cinzas, proteína, lipídios, açúcares totais, açúcares redutores, fibra alimentar total e tanino. Os minerais analisados foram cálcio, fósforo, magnésio, ferro, zinco, sódio, potássio, manganês, silício, alumínio e cobre. As análises microbiológicas foram: coliformes a 45 °C.g -1, Bacillus cereus.g -1, Salmonella sp..25 g -1, e bolores e leveduras.g -1. Verificou-se que a farinha de algaroba apresenta elevados níveis de açúcares (56,5 g.100 g -1), razoável teor de proteínas (9,0 g.100 g -1) e baixo teor em lipídios (2,1 g.100 g -1). Quanto aos minerais observou-se a predominância do fósforo (749 mg.100 g -1) e do cálcio (390 mg.100 g -1). As análises microbiológicas apresentaram resultados inferiores ao limite estabelecido pela legislação, sendo considerada apropriada quanto à qualidade higiênico-sanitária. Portanto, conclui-se que esta possui uma elevada concentração de açúcares além de outros nutrientes, como minerais, importantes para o desenvolvimento humano e animal.

Converter-Fed Induction Motor Losses: Determination With IEC Methods

Energy efficiency is an important topic when considering electric motor drives market. Although more efficient electric motor types are available, the induction motor remains as the most common industrial motor type. IEC methods for determining losses and efficiency of converter-fed induction motors were introduced recently with the release of technical specification IEC/TS 60034-2-3. Determining the induction motor losses with IEC/TS 60034-2-3 method 2-3-A and assessing the practical applicability of the method are the main interests of this study. The method 2-3-A introduces a specific test converter waveform to be used in the measurements. Differences between the induction motor losses with a test converter supply, and with a DTC converter supply are investigated. In the IEC methods, the tests are run at motor rated fundamental voltage, which, in practice, requires the frequency converter to be fed with a risen input voltage. In this study, the tests are run on both frequency converters with artificially risen converter input voltage, resulting in rated motor fundamental input voltage as required by IEC. For comparison, the tests are run with both converters on normal grid input voltage supply, which results in lower motor fundamental voltage and reduced flux level, but should be more relevant from practical point of view. According to IEC method 2-3-A, tests are run at rated motor load, and to ensure comparability of the results, the rated load is used in the grid-fed converter measurements, although motor is overloaded while producing the rated torque at reduced flux level. The IEC 2-3-A method requires also sinusoidal supply test results with IEC method 2-1-1B. Therefore, the induction motor losses with the recently updated IEC 60034-2-1 method 2-1-1B are determined at the motor rated voltage, but also at two lower motor voltages, which are according to the output fundamental voltages of the two network-supplied converters. The method 2-3-A was found to be complex to apply but the results were stable. According to the results, the method 2-3-A and the test converter supply are usable for comparing losses and efficiency of different induction motors at the operating point of rated voltage, rated frequency and rated load, but the measurements do not give any prediction of the motor losses at final application. One might therefore strongly criticize the method’s main principles. It seems, that the release of IEC 60034-2-3 as a technical specification instead of a final standard for now was justified, since the practical relevance of the main method is questionable.

Chemical constituents and technological functional properties of acerola (Malpighia emarginata DC.) waste flour

Acerola is a fruit that can be consumed in the form of juice and pulp. However, during its processing, a large amount of waste is generated (seed and bagasse). Adding value to these by-products is of great interest, since their use can enrich foods with nutrients and fiber. In this study, we performed phytochemical screening, determined the proximate and mineral composition, bioactive compounds and the technological functional properties of acerola seed flour and acerola bagasse flour. Seeds were dried in a ventilated oven at ± 45 °C and the bagasse was lyophilized. Samples were ground, stored in flasks protected from light. Phytochemical screening revealed metabolites of nutritional and pharmacological interest and no potentially toxic substances in the flours. Seed flour and bagasse flour showed high levels (g 100 g- 1 of dry matter - DM) of soluble fiber: 4.76 and 8.74; insoluble fiber: 75.76 and 28.58, and phenolic compounds: 4.73 and 10.82, respectively. The flours also showed high absorption of water, oil and emulsion stability, presenting potential for inclusion in meat products and bakery products.

Extraction optimization of antioxidant polysaccharides from leaves of Gynura bicolor (Roxb. & Willd.) DC

Orthogonal design was employed to study the effect of extraction time, temperature and liquid-to-solid ratio on the production of antioxidant polysaccharides from leaves of Gynura bicolor (PLG). Analysis of variance was performed on the data obtained. The most relevant variable was extraction time. A liquid-solid ratio of 30:1 (v/w), a temperature of 80 °C and an extraction time of 3 h were found to be optimal for PLG. The optimal extraction yield of 4.9% was obtained through additional verification test. Hydroxyl radical-scavenging activity, reducing power and ferrous ion chelating ability of PLG were determined. PLG possess concentration-dependent antioxidant potency and IC50 of PLG was 4.67, 0.24 and 4.31 mg/mL for hydroxyl radical-scavenging and ferric ion chelating abilities as well as reducing power, respectively. The results suggest that G. bicolor polysaccharides could be potential source of natural antioxidant and be contributor to the health benefits of G. bicolor.

Effect of huitlacoche (Ustilago maydis DC Corda) paste addition on functional, chemical and textural properties of tortilla chips

AbstractThis study analyzed the addition of huitlacoche paste (HP) in baked tortilla chips (TC), evaluating its effects on functional, physicochemical and structural changes during processing. Two blue corn grains were nixtamalized, stone milled, air dried and milled to obtain flour; commercial blue corn flour (TM1) and commercial TC (TM2) were used as controls. Additions of 0, 3, 6 and 9% of HP were formulated; masas were prepared at 55% moisture content (MC), precooked and baked in an industrial machine. TC crispiness was influenced by grain characteristics and percentage of HP. Huitlacoche paste addition caused an increase in total dietary fiber (from 5.27 to 14.54%), total soluble phenolics content (from 17.52 to 37.60 mg GAE/100 g) and antioxidant capacity (from 6.74 to 7.98 μmol TE/g) in TC. Results suggest that tortilla chips added with huitlacoche can be an alternative to prepare this traditional edible fungus and produce healthier snacks, not fried and enriched with bioactive compounds.

Electrical Safety of Island Operated Low Voltage DC Network

Today, renewable energy technologies and modern power electronics have made it feasible to implement low voltage direct current (LVDC) microgrids (MGs) ca-pable to island operation. Such LVDC networks are particularly useful in remote areas. However, there are still pending issues in island operated LVDC MGs like electrical safety and controlled operation, which should be addressed before wide-scale implementation. This thesis is focused on the overall protection of an island operated LVDC network concept, including protection against electrical shocks, mains equipment protection and protection of photovoltaic (PV) power sources and battery energy storage systems (BESSs). The topic is approached through ex-amination of the safety hazards and the appropriate methods to protect against them, comprising considerations for earthing system selection and realisation of the protection system.

Caracterização morfológica de frutos e sementes e desenvolvimento pós-seminal de monjoleiro (Acacia polyphylla DC.)

Acacia polyphylla DC. é uma espécie arbórea, característica dos estádios iniciais da sucessão secundária, de ocorrência natural no Brasil. Pertence à família Leguminosae-Mimosoideae, sendo recomendada em programas de reflorestamento misto, recuperação de áreas degradadas e manejo de fragmentos florestais. Entretanto, não foi encontrado nenhuma referência que fizesse menção aos aspectos químicos e morfológicos das sementes, bem como, aos aspectos do desenvolvimento pós-seminal desta espécie. Assim sendo, o presente trabalho objetivou caracterizar morfologicamente e ilustrar frutos e sementes, quantificar alguns componentes químicos presentes nas sementes e descrever as diferentes fases do desenvolvimento pós-seminal. Para tanto, foram realizadas descrições associadas às estruturas externa e interna das sementes. As descrições morfológicas dos frutos e das sementes foram efetuadas em relação a forma, ao tamanho, a superfície, a micrópila e a forma e a localização do embrião. Para a descrição morfológica das plântulas, as sementes foram colocadas para germinar em meio de cultura Murashige & Skoog reduzido à metade da concentração e incubadas a temperatura de 25ºC, sendo descritas e ilustradas as plântulas normais e anormais. O fruto é uma vagem deiscente contendo de oito a 16 sementes achatadas, de tegumento testal, embrião axial e invaginado. A germinação das sementes é epígea e as plântulas fanerocotiledonares.

Armazenamento e requerimento fotoblástico de sementes de Acacia polyphylla DC

Acacia polyphyla (Mimosaceae) é uma espécie arbórea nativa do Brasil, importante para a recuperação de áreas degradadas. Sementes dessa espécie foram armazenadas em condições naturais e artificiais, com os objetivos de avaliar a longevidade das sementes no solo, conservar a sua qualidade fisiológica pelo período correspondente a duas colheitas e verificar o requerimento fotoblástico das sementes armazenadas. Em condições naturais, as sementes foram enterradas em clareira, sob dossel ralo e sob dossel denso. As sementes deterioraram rapidamente, revelando-se incapazes de compor o banco de sementes do solo. Em condições artificiais, as sementes foram acondicionadas em diferentes embalagens e armazenadas por dois anos em ambiente não controlado e em câmara fria. Periodicamente, as sementes foram colocadas para germinar a 25ºC, na ausência de luz e sob fotoperíodo de oito horas sob luzes branca e de sombreamento. Durante todo o período de armazenamento, a germinação no escuro foi inferior à constatada sob luzes branca e de sombreamento. A qualidade fisiológica foi conservada por dois anos, quando as sementes foram acondicionadas em embalagem impermeável e armazenadas em câmara fria. O comportamento germinativo das sementes armazenadas por dois anos foi comparado com o de sementes recém-colhidas, em temperaturas constante e alternada, não sendo constatado efeito da idade e do regime de temperatura no requerimento fotoblástico das sementes.