Influence of test methodology and probe geometry on nanoscale fatigue mechanisms of diamond-like carbon thin film

The aim of this paper is to investigate the mechanism of nanoscale fatigue using nano-impact and multiple-loading cycle nanoindentation tests, and compare it to previously reported findings of nanoscale fatigue using integrated stiffness and depth sensing approach. Two different film loading mechanism, loading history and indenter shapes are compared to comprehend the influence of test methodology on the nanoscale fatigue failure mechanisms of DLC film. An amorphous 100 nm thick DLC film was deposited on a 500 μm silicon substrate using sputtering of graphite target in pure argon atmosphere. Nano-impact and multiple-load cycle indentations were performed in the load range of 100 μN to 1000 μN and 0.1 mN to 100 mN, respectively. Both test types were conducted using conical and Berkovich indenters. Results indicate that for the case of conical indenter, the combination of nano-impact and multiple-loading cycle nanoindentation tests provide information on the life and failure mechanism of DLC film, which is comparable to the previously reported findings using the integrated stiffness and depth sensing approach. However, the comparison of results is sensitive to the applied load, loading mechanism, test-type and probe geometry. The loading mechanism and load history is therefore critical which also leads to two different definitions of film failure. The choice of exact test methodology, load and probe geometry should therefore be dictated by the in-service tribological conditions, and where necessary both test methodologies can be used to provide better insights of failure mechanism. Molecular dynamics (MD) simulations of the elastic response of nanoindentation is reported, which indicates that the elastic modulus of the film measured using MD simulation was higher than that experimentally measured. This difference is attributed to the factors related to the presence of material defects, crystal structure, residual stress, indenter geometry and loading/unloading rate differences between the MD and experimental results.

Beta-blocker usage after malignant melanoma diagnosis and survival: a population-based nested case-control study

Background: Beta-blockers have potential antiangiogenic and antimigratory activity. Studies have demonstrated a survival benefit in patients with malignant melanoma treated with beta-blockers.

Objectives: To investigate the association between postdiagnostic beta-blocker usage and risk of melanoma-specific mortality in a population-based cohort of patients with malignant melanoma.

Methods: Patients with incident malignant melanoma diagnosed between 1998 and 2010 were identified within the U.K. Clinical Practice Research Datalink and confirmed using cancer registry data. Patients with malignant melanoma with a melanoma-specific death (cases) recorded by the Office of National Statistics were matched on year of diagnosis, age and sex to four malignant melanoma controls (who lived at least as long after diagnosis as their matched case). A nested case–control approach was used to investigate the association between postdiagnostic beta-blocker usage and melanoma-specific death and all-cause mortality. Conditional logistic regression was applied to generate odds ratios (ORs) and 95% confidence intervals (CIs) for beta-blocker use determined from general practitioner prescribing.

Results: Beta-blocker medications were prescribed after malignant melanoma diagnosis to 20·2% of 242 patients who died from malignant melanoma (cases) and 20·3% of 886 matched controls. Consequently, there was no association between beta-blocker use postdiagnosis and cancer-specific death (OR 0·99, 95% CI 0·68–1·42), which did not markedly alter after adjustment for confounders including stage (OR 0·87, 95% CI 0·56–1·34). No significant associations were detected for individual beta-blocker types, by defined daily doses of use or for all-cause mortality.

Conclusions: Contrary to some previous studies, beta-blocker use after malignant melanoma diagnosis was not associated with reduced risk of death from melanoma in this U.K. population-based study.

Il Piano della Performance nei Comuni medi. La proposta di una nuova configurazione per superare l’inadeguatezza delle prime applicazioni

Il D.Lgs. 150/09 ha inteso dar vita ad una “riforma organica” della PA italiana, improntandone il funzionamento a logiche di programmazione e controllo delle performance. Attorno a tale concetto la riforma ha costruito un Sistema teso a programmare, misurare, controllare, valutare e comunicare la performance degli enti. Il lavoro si focalizza sulla programmazione, e in particolare sullo strumento cardine introdotto dal D.Lgs. 150/09: il Piano della Performance (PdP). Il contributo, basato su una metodologia deduttivo-induttiva, si concentra sui comuni medi italiani, scelti in quanto statisticamente rappresentativi del livello medio di complessità degli enti locali. Sono stati oggetto di indagine i PdP pubblicati sui siti istituzionali degli enti considerati, al fine di verificarne sia il livello di aderenza alle Linee Guida (LG) emanate dalla Commissione Indipendente per la Valutazione, la Trasparenza e l’Integrità delle amministrazioni pubbliche (CIVIT) e dalla Associazione Nazionale Comuni Italiani (ANCI), sia il loro livello di adeguatezza economico-aziendale. Preliminarmente si indagherà il tema della programmazione, sotto il profilo normativo-dottrinale, concentrandosi su soggetti, processi e strumenti. Poi si sposterà il focus sul PdP: dopo aver definito obiettivi, quesiti e metodologia della ricerca, verranno esplicitate le configurazioni di PdP emergenti dalle LG CIVIT e ANCI. Verranno poi illustrati i risultati della ricerca empirica, mettendo in luce il livello di allineamento dei PdP dei comuni medi alle LG, nonché il livello di adeguatezza economico-aziendale degli stessi. Si tratteggeranno quindi alcune brevi conclusioni.

Exhibiting Maritime Histories: Titanic Belfast in the Post-Conflict City

The sinking of the RMS Titanic in 1912 represents one of the most infamous maritime disasters in the history of shipping. Yet despite it entering the public imagination in the decades after its sinking, until recently it has all but been erased from the collective memory of the people of Belfast, the city in which it was built. In a post-conflict context, however, Belfast has begun to re-imagine the role of the ship in the city’s history, most particularly in the re-development of the docklands area and its designation as the Titanic Quarter, and through its landmark project the Titanic Belfast museum. This paper will trace the economic, social and political context from which the Titanic was built, and the role that this played in silencing any very public commemoration of its sinking until after the signing of the Belfast Agreement. The ‘story’ told in the new museum will be analysed from this perspective and will illustrate how the wounds of the Troubles continue to inform the interpretation of the city’s divided past.

Development of a method to quantify the DNA content in DNA- cationic peptide nanoparticles

Gene therapy has the potential to provide safe and targeted therapies for a variety of diseases. A range of intracellular gene delivery vehicles have been proposed for this purpose. Non-viral vectors are a particularly attractive option and among them cationic peptides have emerged as promising candidates. For the pharmaceutical formulation and application to clinical studies it is necessary to quantify the amount of pDNA condensed with the delivery system. There is a severe deficiency in this area, thus far no methods have been reported specifically for pDNA condensed with cationic peptide to form nanoparticles. The current study seeks to address this and describes the evaluation of a range of disruption agents to extract DNA from nanoparticles formed by condensation with cationic fusogenic peptides RALA and KALA. Only proteinase K exhibited efficient and reproducible results and compatibility with the PicoGreen reagent based quantification assay. Thus we report for the first time a simple and reliable method that can quantify the pDNA content in pDNA cationic peptide nanoparticles.

A Framework for Prototyping and Reasoning about Distributed Systems

A framework supporting fast prototyping as well as tuning of distributed applications is presented. The approach is based on the adoption of a formal model that is used to describe the orchestration of distributed applications. The formal model (Orc by Misra and Cook) can be used to support semi-formal reasoning about the applications at hand. The paper describes how the framework can be used to derive and evaluate alternative orchestrations of a well know parallel/distributed computation pattern; and shows how the same formal model can be used to support generation of prototypes of distributed applications skeletons directly from the application description.

The effects of stepped sites and ruthenium adatom decoration on methanol dehydrogenation over platinum-based catalyst surfaces

A density functional theory study of methanol dehydrogenation over stepped Pt(2 1 1) surfaces without and with Ru modification was carried out to understand fuel catalytic reactions on Pt-based catalysts. Two main pathways of the CH3OH dehydrogenation were examined: the O–H pathway which was initiated by O–H bond scission to form the methoxy (CH3O) intermediate followed by sequential cleavage of C–H bonds to CO, and the C–H pathway which was initiated by C–H bond scission to form the hydroxymethyl (CH2OH) followed by two C–H bond cleavages to COH and then CO. Possible crossover reactions between the O–H and C–H pathways were also computed. Compared to flat Pt(1 1 1), stepped Pt(2 1 1) increases the adsorption energies of intermediates, making no significant contribution to decreasing the reaction barriers of most elementary steps involved, except in the first hydrogen scission. However, on the Ru-modified surface, a significant reduction was found in reaction barriers for the first step of the C–H bond scission and a number of further dehydrogenation steps crossing over to the O–H pathway, with the most facile paths identified. Our data reveals the complexity of methanol catalytic reaction processes at the atomic level and contributes to a fundamental understanding of fuel reactions on Pt-based catalysts.

Biogas reforming using renewable wind energy and induction heating

While the benefits of renewable energy are well known and used to influence government policy there are a number of problems which arise from having significant quantities of renewable energies on an electricity grid. The most notable problem stems from their intermittent nature which is often out of phase with the demands of the end users. This requires the development of either efficient energy storage systems, e.g. battery technology, compressed air storage etc. or through the creation of demand side management units which can utilise power quickly for manufacturing operations. Herein a system performing the conversion of synthetic biogas to synthesis gas using wind power and an induction heating system is shown. This approach demonstrates the feasibility of such techniques for stabilising the electricity grid while also providing a robust means of energy storage. This exemplar is also applicable to the production of hydrogen from the steam reforming of natural gas.