Proposta de metodologia para certificação hídrica de edifícios residenciais

A presente dissertação tem como objetivo a elaboração de uma proposta de certificação hídrica para edifícios residenciais existentes e em fase de projeto. O desenvolvimento desta certificação incide essencialmente na poupança de água potável nos edifícios, demonstrando que o consumo excessivo da mesma poderá traduzir-se num problema no futuro. O uso eficiente da água assume cada vez mais uma importância acrescida. Neste trabalho enumeram-se alguns países da Europa que, devido a uma má gestão da sua água ou às alterações climáticas (como por exemplo, a diminuição da precipitação), se encontram ou poderão se encontrar em “stress hídrico”. É apresentado o Programa Nacional para o Uso Eficiente da Água, fazendo-se referência aos principais objetivos do programa e às medidas propostas para redução de consumos, nomeadamente no setor urbano e em particular ao nível dos sistemas prediais e dos dispositivos em instalações residenciais. Com base nisto, são apresentados consumos e potenciais reduções com a implantação de equipamentos hidricamente eficientes e sistemas de aproveitamento de águas em algumas moradias. Após uma análise de sistemas de certificação da construção sustentável existentes, nacionais e internacionais, é apresentada uma proposta de certificação hídrica de edifícios residenciais. A proposta de certificação é apresentada com recurso a folhas de cálculo Excel.Assenta essencialmente na quantificação dos consumos dos equipamentos sanitários e cálculo do contributo dos sistemas de aproveitamento de águas, sejam cinzentas ou pluviais. À semelhança da certificação energética, a proposta de certificação hídrica faz uma comparação dos consumos da habitação em avaliação com um modelo criado de referência, propondo depois, algumas melhorias que o consumidor pode adotar para melhorar a eficiência da sua residência.

SISAL - Um sistema supervisório para elevação artificial de petróleo

MEDEIROS, Adelardo A. D. et al. SISAL - Um Sistema Supervisório para Elevação Artificial de Petróleo. In: Rio Oil and Gas Expo Conference, 2006, Rio de Janeiro, RJ. Anais... Rio de Janeiro, 2006.

Relatório de estágio

O presente relatório de qualificação profissional surgiu no âmbito da Unidade Curricular de Prática Pedagógica Supervisionada, pertencente ao plano de estudos do Mestrado em Educação Pré-Escolar e Ensino do 1.º Ciclo do Ensino Básico. Deste modo, pretende evidenciar o percurso formativo da mestranda, refletindo as experiências e as competências desenvolvidas nos dois níveis educativos, tendo em vista a construção de um perfil duplo. Neste documento reflexivo espelha-se, portanto, o desenvolvimento de práticas sustentadas num quadro teórico e legal, construído ao longo do percurso formativo da mestranda, nas caraterísticas do contexto onde foram desenvolvidas as práticas nos dois níveis educativos e nos conhecimentos obtidos sobre a individualidade de cada criança, os seus interesses e necessidades. Finda-se este mesmo documento, com uma análise reflexiva de todo o percurso desenvolvido, focando-se as competências adquiridas, evidenciando-se, deste modo, a progressão da mestranda ao longo do mesmo. Durante as suas ações a mestranda perfilhou a metodologia de investigação-ação, espelhada ao longo deste relatório de estágio, desenvolvendo os processos de observação, planificação, ação, avaliação e reflexão, de uma forma cíclica, articulando-os. Esta metodologia e os instrumentos e estratégias desenvolvidos com base na mesma permitiram à mestranda a melhoria das suas práticas, possibilitando-lhe um olhar crítico e reflexivo sobre as mesmas, bem como, sobre a educação na Educação Pré- Escolar e no 1.º Ciclo do Ensino Básico, proporcionando, desta forma, o desenvolvimento de competências investigativas e reflexivas. Todo este percurso formativo possibilitou à mestranda o desenvolvimento de competências pessoais e profissionais na construção de um perfil generalista, apresentando-se como as primeiras “pegadas” de uma aprendizagem ao longo da vida.

Design de interfaces dinâmicos em sistemas de gestão de conteúdos

Relatório de Estágio para a obtenção do grau de Mestre na área de Educação e Comunicação Multimédia

Effect of Cocoa ( Theobroma cacao ) Plantation Types on the Distribution of Anuran Communities in Ore, Ondo State, Nigeria

Anuran species diversity and abundance were evaluated in different farming status of cocoa plantation in Ore, Ondo State, Nigeria. Applying the combination of visual encounter survey (VES) and acoustical survey (AES), the different farms surveyed were categorized as; 1) pure cocoa farms with pesticides applied (PCWP); 2) pure cocoa farms without pesticides application; 3) intercropped cocoa farms with pesticides applied (ICWP); and 4) intercropped cocoa farms without pesticides application (ICNP). The surrounding primary/secondary forest (PSFV) was sampled applying the transect method. A mean total of 690±2.6 anurans belonging to 28 species, 14 genera and 9 families were recorded during the study. Out of these, 10, 19, 17, 22 and 26 species were recorded respectively from PCWP, PCNP, ICWP, ICNP and PSFV. The anuran species richness was significantly different between the different cocoa plantation status and the forest sites (F4, 10 = 20.55, P< 0.01). The highest mean number of individuals (190±9.5) was observed at ICNP followed by PSFV (183±5.7), while the least was at PCWP (77±8.0). There was also significant difference (F4, 10 = 150.48, P< 0.01) between the abundance of anuran species at the various sites. Diversity indices (Shannon and Margalef) showed that the forest sites had the greatest (3.204 and 4.799) respectively while the pesticide using pure cocoa farms had the least (1.853 and 2.072). Generally, the result of the study clearly indicated that pesticide use cocoa farms were significantly lower compared to other sites. Farmers are encouraged to engage in intercropping (polyculture) especially with food and economic crops in a biodiversity friendly manner which could have similar characteristics of a natural ecosystem, thereby enhancing the biological diversity of agro-ecosystems.

La noción del aparato sonoro en la obra de tres artistas colombianos

En este trabajo se propone realizar un análisis del elemento sonoro en las prácticas de tres artistas contemporáneos colombianos -- Esta búsqueda se realiza desde una mirada filosófica que indaga sobre cómo el sonido conecta el cuerpo opaco interior del ser con el mundo exterior, tratando y se sustenta en la forma en la que los artistas utilizan el sonido en sus obras, teniendo como punto de partida esa pretensión de alcances ontológicos: sonido que define al ser y su relación con el mundo y da lugar al interrogante sobre cuál es la resonancia de ese mundo interior en la creación de la obra artística -- La idea fundamental de esta búsqueda está sustentada en la existencia de los cambios en la sensibilidad implicados en la irrupción del aparato sonoro en la cotidianidad -- El sustento referencial se acerca de manera directa a plantear la existencia de un ser sonoro, permeado desde antes de nacer por la onda vibratoria; un ser producto de fuerzas históricas moldeadas en la resonancia -- Se utiliza el concepto de acusmática para proponer un régimen de lo sonoro, allí donde de manera directa se insertan todos los dispositivos que al aparecer interrogan y jalonan la percepción

Avaliação de heterociclo do tipo mesoiônico solubilizado em sistema microemulsionado para aplicação em dutos

The efficiency of inhibition to corrosion of steel AISI 1018 of surfactant coconut oil saponified (SCO) and heterocyclic type mesoionics (1,3,4-triazólio-2-tiolato) in systems microemulsionados (SCO-ME and SCO-ME-MI) Of type O/A (rich in water emulsion) region with the work of Winsor IV. The systems microemulsionados (SCO-ME and SCO-ME-MI) were evaluated with a corrosion inhibitor for use in saline 10,000 ppm of chloride enriched with carbon dioxide (CO2). The assessment of corrosion inhibitors were evaluated by the techniques of linear polarization resistance (LPR) and loss of weight (MW) in a cell instrumented given the gravity and electrochemical devices. The systems were shooting speed of less than 60 minutes and efficiency of inhibition [SCO-ME (91.25%) and SCO-ME-MI (98.54%)]

Influência da vermiculita expandida na resistência à compressão e reologia de pastas cimentantes de poços de petróleo

Several problems related to the loss of hydraulic seal in oilwells, causing gas migration and/or contamination of the production zone by water, have been reported. The loss of the hydraulic seal is a consequence of cracks which can be occasioned either by the invasion of gas during the wait on cement or by the expansion of the casing causing the fracture of the cement sheath. In case of the pressure of the formation is higher than the pressure in the annulus, gas can migrate into the slurry and form microannulus, which are channels where gas migrates after the cement is set. Cracks can be also occasioned by the fracture of the cement sheath when it does not withstand the thermal and dynamic loads. In reservoirs where the oil is heavy, steam water injection operation is required in order to get the oil flowing. This operation increases the temperature of the casing, and then it expands and causes the fracture of the cement sheath in the annulus. When the failures on the cement are detected, remedial cementing is required, which raise costs caused by the interventions. Once the use of cement in the construction civil sector is older than its use in the petroleum sector, it is common to bring technologies and solutions from the civil construction and apply them on the petroleum area. In this context, vermiculite, a mineral-clay widely encountered in Brazil, has been used, on its exfoliated form, in the civil construction, especially on the manufacture of lights and fireproof concretes with excellent thermal and acoustical properties. It has already been reported in scientific journals, studies of the addition of exfoliated vermiculite in Portland cements revealing good properties related to oilwell cementing operations. Thus, this study aimed to study the rheological behavior, thickening time, stability and compressive strength of the slurries made of Portland cement and exfoliated vermiculite in 5 different compositions, at room temperature and heated. The results showed that the compressive strength decreased with the addition of exfoliated vermiculite, however the values are still allowed for oiwell cementing operations. The thickening time of the slurry with no exfoliated vermiculite was 120 min and the thickening time of the slurry with 12 % of exfoliated vermiculite was 98 min. The stability and the rheological behavior of the slurries revealed that the exfoliated vermiculite absorbed water and therefore increased the viscosity of the slurries, even though increasing the factor cement-water. The stability experiment carried out at 133 ºF showed that, there was neither sedimentation nor reduction of the volume of the cement for the slurry with 12 % of exfoliated vermiculite. Thus, the addition of exfoliated vermiculite accelerates the set time of the cement and gives it a small shrinkage during the wait on cement, which are important to prevent gas migration

X-Ray powder diffraction laboratory @ University of Málaga (UMA)

X-Ray Powder Diffraction (XRPD) laboratory is a facility placed at Servicios Centrales de apoyo a la Investigación (SCAI) at University of Malaga (UMA) http://www.scai.uma.es/. This facility has three XRPD diffractometers and a diffractometer to measure high-resolution thin-films. X´Pert PRO MPD from PANalytical. This is a bragg-brentano (theta/2theta) with reflection geometry diffractometer which allows to obtain high resolution XRPD data with strictly monochromatic CuKα1 radiation (λ=1.54059Å) [Ge(111) primary monochromator] and an automatic sample charger. Moreover, it has parallel monochromatic CuKα1 radiation (λ=1.54059Å) with an hybrid Ge(220) monochromator for capillary and multiproposal (bulk samples up to 1 Kg) sample holders. The HTK1200N chamber from Anton Paar allows collecting high resolution high temperature patterns. EMPYREAN from PANalytical. This diffractometer works in reflection and transmission geometries with theta/theta goniometer, using CuKα1,2 radiation (λ=1.5418Å), a focusing X-ray mirror and a ultra-fast PIXCEL 3D detector with 1D and 2D collection data modes (microstructural and preferred orientation analysis). Moreover, the TTK450N chamber allows low temperature and up to 450ºC studies. A D8 ADVANCE (BRUKER) was installed in April 2014. It is the first diffractometer in Europe equipped with a Johansson Ge(111) primary monochromator, which gives a strictly monochromatic Mo radiation (λ=0.7093 Å) [1]. It works in transmission mode (with a sample charger) with this high resolution configuration. XRPD data suitable for PDF (Pair Distribution Function) analysis can be collected with a capillary sample holder, due to the high energy and high resolution capabilities of this diffractometer. Moreover, it has a humidity chamber MHC-trans from Anton Paar working on transmission mode with MoKα1 (measurements can be collected at 5 to 95% of relative humidity (from 20 to 80 ºC) and up to 150ºC [2]). Furthermore, this diffractometer also has a reaction chamber XRK900 from Anton Paar (which uses CuKα1,2 radiation in reflection mode), which allows data collection from room temperature to 900ºC with up to 10 bar of different gases. Finally, a D8 DISVOVER A25 from BRUKER was installed on December 2014. It has a five axis Euler cradler and optics devices suitable for high resolution thin film data collection collected in in-plane and out-of-plane modes. To sum up, high-resolution thin films, microstructural, rocking-curve, Small Angle X-ray Scattering (SAXS), Grazing incident SAXS (GISAXS), Ultra Grazing incident diffraction (Ultra-GID) and microdiffraction measurements can be performed with the appropriated optics and sample holders. [1] L. León-Reina, M. García-Maté, G. Álvarez-Pinazo, I. Santacruz, O. Vallcorba, A.G. De la Torre, M.A.G. Aranda “Accuracy in Rietveld quantitative phase analysis: a comparative study of strictly monochromatic Mo and Cu radiations” J. Appl. Crystallogr. 2016, 49, 722-735. [2] J. Aríñez-Soriano, J. Albalad, C. Vila-Parrondo, J. Pérez-Carvajal, S. Rodríguez-Hermida, A. Cabeza, F. Busqué, J. Juanhuix, I. Imaz, Daniel Maspoch “Single-crystal and humidity-controlled powder diffraction study of the breathing effect in a metal-organic framework upon water adsorption/desorption” Chem. Commun., 2016, DOI: 10.1039/C6CC02908F.

Remoción del barrillo dentario después de la preparación del espacio para el poste: requisito u omisión

El pronóstico a largo plazo de una pieza dental tratada endodónticamente depende de una adecuada rehabilitación definitiva que evitará la recontaminación del sistema del conducto radicular, permitiendo a su vez restituir de forma efectiva su función y estética en boca. La colocación de postes dentro del conducto radicular está indicada cuando el sustrato dental residual es muy limitado, permitiendo al especialista reconstruir la estructura dentaria para que la restauración futura pueda ser retenida. Diversos estudios concluyen que los postes de fibra de vidrio son una de las mejores alternativas para establecer un anclaje seguro entre la pieza dental y la restauración, los cuales son retenidos en el interior del conducto radicular mediante cementos resinosos en combinación con sistemas adhesivos. Este anclaje puede modificarse por diversos factores que pueden ser dependientes del operador como la elección de protocolos químiomecánicos en la terapia endodóntica y al momento de la preparación del espacio para el poste, o independientes del operador, como la anatomía del conducto radicular, formación de la capa barrillo dentinario durante la desobturación, el sustrato de adhesión, mecanismos endógenos y comportamiento de los materiales. Por lo tanto el presente estudio plantea una revisión de las variables a las que se enfrenta el especialista para obtener una adecuada retención del poste al conducto radicular por medio de cementos adhesivos, proponiendo diversos protocolos de irrigación y dispositivos coadyuvantes basados en evidencia científica que ayudaran a neutralizar los efectos adversos que el operador puede controlar.

Effect of oxygen on the electrical characteristics of field effect transistors formed from electrochemically deposited films of poly(3-methylthiophene)

Field effect devices have been formed in which the active layer is a thin film of poly(3-methylthiophene) grown electrochemically onto preformed source and drain electrodes. Although a field effect is present after electrochemical undoping, stable device characteristics with a high modulation ratio are obtained only after vacuum annealing at an elevated temperature, and only then if the devices are held in vacuo. The polymer is shown to be p type and the devices operate in accumulation only. The hole mobility in devices thermally annealed under vacuum is around 10 -3 cm 2 V -1 s -1. On exposure to ambient laboratory air, the device conductance increases by several orders of magnitude. This increase may be reversed by subjecting the device to a further high-temperature anneal under vacuum. Subsidiary experiments show that these effects are caused by the reversible doping of the polymer by gaseous oxygen.

A HUMAN-CENTERED APPROACH TO IMPROVING THE USER EXPERIENCE OF SOFTWARE UPDATES

Software updates are critical to the security of software systems and devices. Yet users often do not install them in a timely manner, leaving their devices open to security exploits. This research explored a re-design of automatic software updates on desktop and mobile devices to improve the uptake of updates through three studies. First using interviews, we studied users’ updating patterns and behaviors on desktop machines in a formative study. Second, we distilled these findings into the design of a low-fi prototype for desktops, and evaluated its efficacy for automating updates by means of a think-aloud study. Third, we investigated individual differences in update automation on Android devices using a large scale survey, and interviews. In this thesis, I present the findings of all three studies and provide evidence for how automatic updates can be better appropriated to fit users on both desktops and mobile devices. Additionally, I provide user interface design suggestions for software updates and outline recommendations for future work to improve the user experience of software updates.

Arquitetura de rede com suporte à mobilidade de fluxo IP e ao gerenciamento de Mobilidade Distribuído (DMM)

Dissertação (mestrado)—Universidade de Brasília, Faculdade de Tecnologia, Departamento de Engenharia Elétrica, 2016.

Estudo sobre as potencialidades de compósitos à base de gesso e fibras de coco seco para aplicação na construção civil

The use of gypsum, one of the oldest building materials for the construction industry in the country has been experiencing a significant and steady growth, due to its low cost and some of its properties that confer comparative advantage over other binder materials. Its use comprises various applications including the coating of walls and the production of internal seals and linings. Moreover, the fibers are being increasingly incorporated into arrays fragile in an attempt to improve the properties of the composite by reducing the number of cracks, the opening of the same and its propagation velocity. Other properties, depending on the function of the component material or construction, among these thermal and acoustic performances, are of great importance in the context of buildings and could be improved, that is, having better performance with this embodiment. Conduct a comparative study of physico-mechanical, thermal and acoustic composite gypsum incorporating dry coconut fiber, in the form of blanket, constituted the main objective of this work. Improving the thermal and acoustic performances of precast gypsum, used for lining and internal vertical fences of buildings, was the purpose of development of these composites. To evaluate the effect of fiber content on the properties of the composites were used to manufacture the composite layer with different thicknesses. The composites were fabricated in the form of plates with dimensions of 500x500x24mm. To facilitate the comparative study of the properties were also made with material gypsum boards only. We then determined the physico-mechanical, thermal and acoustical plaster and composites. The results indicated that the composites were significant gains in relation to thermal performance and also acoustic, in certain frequency range, increasing the thickness of the blanket. Concerning other physical-mechanical properties, the results showed that although the compressive strength was lower than for the composite did not occur after a fracture catastrophic failure. The same trend was observed with regard to resistance to bending, since the composites have not suffered sudden rupture and still continued after the load supporting point of maximum load

Auscultación cervical: alternativa no invasiva en el diagnóstico de disfagia en niños con problemas de neurodesarrollo

Los niños y las niñas con disfunciones neurológicas tienen frecuentemente disfagia, condición que les ocasiona infecciones respiratorias a repetición, desnutrición, mala calidad de vida; su oportuno diagnóstico permite decidir sobre la mejor intervención. La videofluoroscopia y de videoendoscopia son técnicas diagnósticas invasivas, costosas y por lo tanto difíciles de hacerlas, lo que ocasiona retardo en el diagnóstico e intervención. Hoy en día existen nuevas tecnologías médicas no invasivas que pueden ser muy eficaces, una de ellas es la auscultación cervical que escucha los sonidos de la deglución mediante un estetoscopio u otro dispositivo de medición como la colocación de un micrófono o un acelerómetro en la superficie del cuello. Este método tiene como principio que los sonidos y/o movimientos biológicos normales de la deglución son diferentes de los anormales. En este artículo se presenta una revisión de la pertinencia social del diagnóstico de la disfagia, de las aplicaciones clínicas de la auscultación cervical y los dispositivos usados para realizarla, como una base para establecer su potencial de uso para la detección de disfagia en niños con problemas de neurodesarrollo. Estas orientaciones teóricas permiten al médico tener actuaciones más acertadas en el diagnóstico integral de niños y niñas con disfunción neurológica